Change The Cell Color On Drop Down Change
Jun 3, 2008
I have a drop down sub pasted to worksheet:
Private Sub ComboBox1_Change()
ComboBox1.List = Array(100, 200, 300, 400)
If Range("I11").Value < Range("N11").Value Then
If Sheets("Profile").Range("K18").Value < ComboBox1.Value Then
Range("I11").Interior.ColorIndex = 2
Else
Range("I11").Interior.ColorIndex = 3
End If
End If
End Sub
I want it to change the cell color on drop down change. How can I modify things to have the change in drop down selection?
View 9 Replies
ADVERTISEMENT
Apr 2, 2013
How do I change the color of a row, based on the users selection from a drop down box in that row? I have four driving types in my drop down , Towing - Town Driving - All highway - Mixed. I would like each driving type, if selected, to change the color of the entire Row of Data to a different color. I have been able to use conditional formating to change the drop down cell itself, but that is it.
View 1 Replies
View Related
Dec 10, 2008
I have a chart where half the users want a black backgroud and half want a gray background. Is there a way I can change the chart colors based on a textbox value? I would have the user choose a value (say, "Dark Background or Light Background") and then, upon commencing the macro it changes the chart.
View 4 Replies
View Related
Jan 9, 2008
Is it possible to change those AutoFilter drop-down arrows that are active? As it is now they are hard to spot which is in use.
View 5 Replies
View Related
Jul 6, 2009
I'm using Excel 2007.
I have a field with a "YES"/"NO" drop-down box. There are three fields below which have some default formatting (thick purple dot-dot-dash borders). When the drop-down field is "YES", those three fields should change borders to a single thin black bottom border line.
OK... so that's the setup. And I should note here that it does in fact format properly. However, the problem I'm having is that the screen does not update / repaint with the new formatting. The thick purple dot-dot-dash borders remain, for the most part.
If I page down, then page back up, the new formatting appears just fine. When I switch from "YES" to "NO", again, the formatting changes, but the screen does not update/repaint so the only way to see the new formatting is to again... page up and then page down again.
I'm wondering if anyone knows a way to force the screen to repaint/update so that my users will see the new formatting without having to page up/down.
View 9 Replies
View Related
Jun 17, 2009
an event macro to change the font colour of a cell whose value changes as a result of a calculation.
View 9 Replies
View Related
Feb 15, 2010
I would like to be able to change the color of a cell in V4:AB31 and have the formula in AM10:AM13 automatically calculate the new result. As it is now the user has to press Ctrl ALT f9 for the formula to recalculate.
View 7 Replies
View Related
Apr 18, 2008
I have two columns. The first one (A) contains cells that have different Fill colors. The second column (B) contains text adjacent to the colored cells. I am trying to change the color of the text in the second column (B) to the corresponding color in the adjacent cell in the first column (A). I don't think conditional formating works well in this situation. I believe the solution would be some sort of macro.
View 3 Replies
View Related
Jul 9, 2009
I have font color white in blank cells in column E and I (from row 5 to row 245) so the visitors will not see the text. If any of these cells become yellow (color code is 6), the font color will become black so visitors can see the text alot far better than white. I've tried this code myself after this post but nothing happen
View 4 Replies
View Related
Oct 17, 2006
I have various row cells in column (F) filled with the color Green. And corresponding text in Column G. How can I change the text of that particular row to white.
i.e.: if any cell in column F is Green, change the text color of that row in Column G to white?
View 5 Replies
View Related
Nov 1, 2009
In Excel 2007; I need my drop down list to then change the next cell down to a series of different values? How do i do this? i have created the drop down list, but can't link the values to the item selected in the drop down list. The JPG attached shows a basic set up of what i am trying to do: The drop down list contains various product models (yellow) Once selected this then changes the m2 value (red) which is linked to the formulas in orange; product factor is entered manually.
View 3 Replies
View Related
Dec 20, 2009
I have two drop down menus: Class Name and Class Period.
Class name returns reading, math, science, or social studies.
Class period returns 1,2,3, 4,5
I need a formula for a cell that will return the name of the first student in whatever criteria is selected by the two drop down menus.
Example: If reading 2 were selected, I would want the name of the first student in reading period 2.
I did start out with nested If's combined with ands, but that is too many nested ifs. I figured there was a better or easier way to do this.
Formula I thought of: =IF(AND(G3="Reading", H3=1), '[Reading 8.xls]Sheet1'!$A6, IF(AND(G3="Reading", H3=2), '[Reading 8.xls]Sheet1'!$D6)) etc.....
But if I use that there would have to be 20 nested ifs, which I think I read someone nested ifs cap at 9.
View 8 Replies
View Related
Jul 31, 2008
I have two worksheets...
Sheet 1
A1: description
A2: Target Iteration
A3: Concat A1, A2.
Sheet 2.
A1: Drop down datavalidation list selected from A3, sheet 1.
On sheet 2, a user can select from the list. If a user changes the value in A2, sheet 1, I want the value that is associated and already selected in A1, sheet 2 to automatically update. There is a 1 to many relationship with the concat and the drop down. In that, sheet 2 can have multiple rows with the same value from sheet 1 A3. Is there a way when A3 sheet 1 changes, to search in A:A in sheet two and update the values for those records that match the original value in A3, sheet 1?
View 2 Replies
View Related
Nov 24, 2009
What formula do i use if i want the text in cell A1 to change to red if any entry is made in cell B1.
View 2 Replies
View Related
Dec 14, 2009
I am having some color problems. From A2:AB2000 I have different fill colors for cells all over the place. The only color I need is the color purple which I believe is the color “39”.
So basically all cells except the cells with the color purple change to white from A2:AB2000. I would like to add this code to the macro I have already created.
View 2 Replies
View Related
Nov 22, 2012
I'm trying to put together a script which changes the color of the row in columns A:AE if any cell in the Range B7:B400 has the value of 'No'. If it has the value of 'Yes' I would like it to Exit Sub.
I've put together the code below to try an create this function, but I'm running into a few problems.
Code:
If Intersect(Target, Range("B7:B400")) Is Nothing Then Exit Sub
If Selection.Cells.Count > 1 Then Exit Sub
If Target "No" Then[code]....
When the value of any cell in Range B7:B400 is 'Yes' the row changes to grey, if I enter 'No' it removes all cell shading from the row, and I'm not very clear on what changes I need to make.
View 2 Replies
View Related
Apr 4, 2007
I've got some spread sheets that I send out. People fill them out and send them back to me. The only problem is that I dont know which cells they've changed and which cells they've left. Is thier a way to tell VB to change the color of a cell if the value has changed
View 9 Replies
View Related
Jul 24, 2007
I have to check a cell to see if ti has a date in it, if so , then i have to check the current date to another cell, if the current date is greater then that cell i want to change the color of the cell
View 9 Replies
View Related
Apr 28, 2008
When I click on a button I would like an option to cancel a row range of cells by turning the writing red with a cross through it.
So if I wanted to cancel a certain row of data I would click on a button, enter the range of cells to cancel and then this would turn all of the writing in the cells to red colour with a strike through the words.
View 9 Replies
View Related
Jan 7, 2010
i need to add this in a macro that i previously created
here is what i need, i hope its clear for everyone to understand
I want to be able to change a color of a row to purple if a cell is greater than 5 days
so basically what i need is something like this
IF BQ1 has the data "APPROVED" and data in BP1 is 01/04/10 and BN1 is blank and if BN1 is blank after 5 days of BP1 then the color of this row changes to purple
View 9 Replies
View Related
Mar 23, 2007
I want to change the row color after the value in one of the cells equals a certain value. What is the best/easiest way to accomplish this?
View 9 Replies
View Related
Jul 30, 2009
Is there a way to have a drop down or some sort of input cell that would change the look and format of the entire worksheet? Not sure how to pose the question?? For example.
What I'm working on is a departmental forecast sheet.
I want my department heads to be able to all look at the same excel file, then be able to input or select their department from a drop down. Once the department is selected that would call for excel to bring up the forecast for their specific department (**Each departments sheet is a little different).
View 9 Replies
View Related
Jul 20, 2009
I'm putting the sum of 3 cells in a 4th cell(D2). If the sum is greater, I would like the sum to be the color green. If the sum is less, I would like the sum to be the color red. Is this possible?
(D2) has change value, I want to compare the new value against the existing one.
View 9 Replies
View Related
Mar 10, 2014
I would like to change the default color of any excel sheet I use to grey from the standard white and I am struggling to find out how this is achieved.
In other words, I am trying to have all cells in the sheets I work with appear grey on my screen by default. A coworker of mine used to work in banking and she has grey cells but does not know how she changed them.
View 1 Replies
View Related
Aug 25, 2009
I'm trying to do. I have 2 columns, both have empty cells with borders. I would like to make it so that when the user clicks one of the cells, it turns grey and the one beside it turns white. I set up two macros as follows:
View 3 Replies
View Related
Dec 20, 2011
I'm trying to set up a spreadsheet to track 20 vehicles mileage, and when they are due for an oil change. I have the value of when they are next due in column D, and the actual mileage in column G. I want to have the row for each vehicle turn yellow when they are within 1,000 miles of needing an oil change, and red when they are due/overdue.
View 2 Replies
View Related
Mar 21, 2012
I ran a quick code to see if this would work. it did at first then stopped.
Code:
Private Sub Worksheet_SelectionChange(ByVal target As Range)
tcol = target.Column
trow = target.Row
If Cells(trow, tcol).Interior.ColorIndex = -4142 Then Cells(trow, tcol).Interior.ColorIndex = 8
If Cells(trow, tcol).Interior.ColorIndex = 8 Then Cells(trow, tcol).Interior.ColorIndex = -4142
MsgBox trow & " " & tcol & " " & Cells(trow, tcol).Interior.ColorIndex
End Sub
In short I am trying to toggle between color/no color when a cell is selected. I got the -4142 from using the MsgBox to determine the value. Should I be approaching this differently?
View 4 Replies
View Related
Mar 29, 2012
I have been trying to figure out how to change the color of a specific tab based on information being entered in cell "B9" for each sheet that the tabs represent. If there is information in cell B9 on "tab 1", I want only tab 1 to change a color. If there is no information entered in cell B9 of tab 2, then I want tab 2 to stay with its default color.
There are 34 tabs I want this to happen to, out of just more than 60 total tabs on the worksheet.
View 9 Replies
View Related
Sep 24, 2013
VBA code to do the following.
In F147 will go a value
Then if the value of F147 is greater than 20 the color of D144 would turn green.
View 3 Replies
View Related
Apr 4, 2014
I am working on a code in which i have to change the color of certain cells if the value of a cell is Y/N. The color should change with the user input.
Set wsheet = wbook.Worksheets("XYZ")
For Row_start=10 to Row_count 'Row count is the last used row in the worksheet
RowValue = ActiveCell.Row
colValue = ActiveCell.Column
if colValue = 17
[Code] ....
View 1 Replies
View Related
