Change Column Format
Dec 23, 2008See attached picture. In column I need A B C D… replace by 1 2 3 4…
View 2 RepliesSee attached picture. In column I need A B C D… replace by 1 2 3 4…
View 2 RepliesI am unable to change the date format in a column of dates. The cells have values that look like the following: 4/29/2013 8:59:12 AM. I want to change these to YYYY-MM-DD format, but no matter what I try the format will not change.
View 4 Replies View RelatedThe attached file contains data. In Worksheet 1 (and also 2 and 3) column B2 shows day, month, year, hours, minutes and seconds. I was hoping to convert this to just Hours and Minutes, but all the usual methods using Custom Format does not work. This leads me to think that its in TEXT format. How can I change Column B2 to Hours and Minutes?
View 14 Replies View RelatedI have created a userform but I am having extensive problems with the date formats.
My system is set to UK and short date is set to: DD/MM/YYYY
When I used code to add the values in the userform to the spreadsheet, any that contained a date format would revert to the US format.
So I finally figured out to use DateValue to format it correctly for example: ...
I would like to have a single button that changes a range of cells from the USD to EURO to perhaps CAD symbol. Can this operation be performed, such that if I start in dollars, and I click the button once, it shifts by range to EURO (not formulas...just symbol)...and then if I click the same button again, it goes to CAD, and then back to USD with a third click?
View 5 Replies View RelatedI have two columns where there are dates (e.g. 11/05/2009) in a date format; I would like to change the format to `general`; but without losing the original values, i.e. I still want to see 11/05/2009, but just in `general`format. Is it possible to create a macro that will do that? I want these values to stay in the same place, i.e. if it is in cell K10, I still want to have it there - just in other format.
View 9 Replies View RelatedI have an excel sheet full of dates in text format and want to convert them into regular format. For instance, one of the dates listed is in text as "60801". I'd like it to show in regular date format of mm/dd/yyyy, so that 60801 becomes 8/1/2006.
I have txtboxes in which I write date in format dd/mm/yyyy but if I want to put date in cell correctly from this textbox in need to declare event on exit -change format to mm/dd/yyyy and then it puts date in desired format which is dd/mm/yyyy and my regional settings are English(uk)
Is there a way to put any date format in textbox and in cell there will always be format dd/mm/yyyy or at least if date is entered in format dd/mm/yyyy that also in cell the same format is putted
Is it possible to change the contents of a cell (A1) displaying a name as:
John Smith
to Smith, John (in cell B1)
I have a column of cells with values - 0.2%, 0.32%, 0.22, 0.5 etc. The cells with % symbol are in ' Percentage, 2 decimal' format while the plain numbers are in 'General' format i.e. column contains cells in either of these formats. I need a macro where I can specify the column and it will select the cells with the % format, convert it to 'General' and multiply the result by 100 eg. 0.2% converted to 'General' becomes 0.002. When multiplied by 100, result is 0.2 i.e. is displayed without the % symbol.
View 7 Replies View Related I have a situation that I cannot get my hands on. I have a set of Project Numbers in my Column A. (Will Try to post an example).
I need that everytime I change a number in my Column B that it will change all the numbers, in my column B, based on the matching Text in my Column A.
Demo1.xlsm
I have used the below code to insert a new row when the value in coulmn A change. I now need to evolve it so that the new row will contain a specific value depending on the changing value:
Before:
Column A Column B
one test
one test
two test
two test
three test
three test
After:
Column A Column B
one test
one test
Coz two............................
How would I add this formula as a worksheet function with VBA. I can't see INT, MOD or Year in VBA. Also want to change C2 to change to activecell column + row 2.
=INT(((C2-1461)- SUM(MOD( DATE(YEAR(C2-MOD(C2,7)+3),1,2)-1461,{1E+99,7})*{1,-1})+5)/7)
The formula below is to change the fill colour of a date cell prior to the date expiring. The 120 value is number of days
=(E7-today())<=120
The problem i have is it only seems to work if i format the cell and use mmm-yy.
I want to use the same formula for dd-mm-yy..
I need to turn millions (I'm guessing around 4-5 million, though I'm not completely sure since I don't have a program that can actually open the file completely since it's so large) of lines of text which are formatted like this:
05/15/09 09:45:01 AM 16600 1
into lines which are formatted like this:
20090515 094501;16600;1
I could do it by hand, but since there are literally millions of lines like this, it would probably take me about a year to do. So my questions are:
1. Is there a way to do this relatively quickly in Excel?
2. When I open this file in Excel, the year and time tabs aren't filled in with the year and time, but simply with "#######", though if I click on the cell, the year or time is displayed up in the "fx" function bar thing. Is there a way to keep these cells from displaying as "#######"?
3. Right now when I open the file (it's a CSV file), it only opens a little over 1 million of the lines, and an alert pops up that says the entire file was not opened. Is there any way to get the entire file to open? If not, how could I split the file into pieces that are small enough for Excel, and then how could I join those pieces back together?
I have a column with times in it, it seems to be formatted to HH:MM I would like to change this to HH:MM:SS but it will not seem to change at all by formatting the cells, does this mean I will need to go through each individual time and change it to the new format or is there some sort of work around?
View 6 Replies View Related how to change the cell format (or use a formula) so that the inputs typed below can look like proper dates?
20121231
20111230
20101231
20091231
20081231
20071231
20061229
PHONE formatting. Is there a way to create a macro to format the VALUE of the phone to be either (XXX) XXX-XXX or XXX-XXX-XXXX ? I obviously can get it to look like this, but the value is just XXXXXXXXXX.
View 13 Replies View Relatedwhen I do Format Cell, the date formats offered use US formats like 20/02/1999. Why does it do this, and can I fix it? I suspect that this the root of the following problem.
I have a button on a userform to enter today's date into a textbox. It enters it as 05/27/2009. The wrong format. I save the data to the worksheet, then use the data form to go to the next record, then back. The date then appears in the correct format as 27/05/2009.
Another related problem: if I enter a date manually into the textbox on the dataform, such as 2/3/2008, it interprets it as Feb. 3, and when I save it to the worksheet, and then use the form to view it, it comes out as 3/2/2008.
In column M, i have a long series of times (times of day) which are currently formatted as "1654", "1021", "1628", etc. In column AI, i need to reformat those dates to look like: "00:00:00.000"
What would the formula to accomplish that look like?
I have data in excel sheet named LSR from A2:L3000 sample as below. i want to have a VBA code to change the data as below.
Data before changing
FK
PLATE NO
Vehicle
23
1234DB
toyota
[Code]....
After running VBA code
FK PLATE NO Vehicle FK PLATE NO Vehicle FK PLATE NO Vehicle
23 1234DB toyota 23 98544DB ford
34 34322SW hyundai
21 34344TR nissan
451 43434FR toyota
39 43423TY nissan 39 34445FE ford 39 43455ER nissan 39 343444E landrover
189 44455E nissan
I have column A1 as 9/8/2012 11:00:00 AM. I would like to change it in the specific format as DD.MM.YYYY HH:MM, so I want it to read as exactly this way 08.09.2012 11:00.
I tried breaking the format as separate date and time n then joining back still no luck as when i delete columns A and B its a total disaster.
I simply want the DD.MM.YYYY HH:MM format
I'm trying to find a VBA code that will look through all my cells and any cell that equals a certain text, it will change the format to "strikethrough" and put a line through the text.
Can Attached code be changed to alter font colour,type. rather than just fill colour.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer
If Not Intersect(Target, Range("e:Az")) Is Nothing Then
Select Case Target
Case "Ph"
icolor = 6
Case "Li"
icolor = 12
Case "O"
icolor = 7
Case "An"
icolor = 53
Need to Change date and time Format.
23 June 2013 14:02:10 BST
" 23 June 2013 00:47:58 BS"
23 June 2013 13:22:21 BST
23 June 2013 13:22:21 BST
Find the attached dump : jlr.xlsx
Required Output
06/23/2013 14:02
I am facing a problem with number formats. I have downloaded some data from a database. In the data, there are some date columns in MM/DD/YYYY format. In a seperate workbook, I have copied that data as values.
Now when I am trying to change the formats of the dates to d-mmm-yy, they don't change. The formats are not not changing to any other format. I even tried changing the formats using VBA, but it did not work.
I am having slight trouble with the formatting of some cells. Every month I will be copying data into a row, the problem is Excel thinks it's a date instead of an integer of some sort.
The value copied will look something like this:
79:42:00
(meaning 79 hours and 42 minutes)
Excel is taking that and interpreting it as:
1/3/1900 7:42:00 AM
Is there an easy way to format this so Excel thinks it's a number (even if 79.7).
I tried to change the format of the cell to "Text", but it changes it to: 3.32083333333333
I have a file that I want to change the format for my date field. Currently the cells are in general format. How can I put them into a date format. Example the first one is 20070328, how can I make this 03/08/2007?
View 5 Replies View RelatedIf I enter 2.5 into a cell, and then change the format so that there are no digits after the decimal, the number changes to a 3.
2.4 correctly rounds to 2, but shouldn't 2.5 round to 2???
I thought that even numbers were supposed to round down, and odd numbers round up when there is a 5 right after the decimal.
I can't figure out to place conditional formatting on a range at each change in cells in column A....ie. in column A, several rows will have the value "1", then several will have the value "2", all the way through "52"...sometimes there could be 4 rows with the same value, otheres there may be 5, or others even only 1.....so I need conditional formatting that says each time the value in column A changes, highlight all cells in that row one color and change that color at each change. Does that make sense?
View 7 Replies View Related