Clear Listbox Selection
Feb 6, 2008
I've got a userform with a listbox, and want to clear the listbox's selection after the user clicks on it (and an operation is performed)
I've tried setting the listindex to -1, but it behaves strangely and calls the listbox_click function again...
Private Sub LocationsAddable_Click()
AddNewLocation (LocationsAddable)
'LocationsAddable.ListIndex = -1
End Sub
with the second line commented, it only runs thru the sub once, but selection not cleared....
if i uncomment the second line, then i get thrown back into this same sub....
View 9 Replies
ADVERTISEMENT
May 1, 2014
I have two lists mainly TV Brand & There Models.
List 1 (TV Brand)
Sony
LG
Samsung
Depended List 2 (Models)
Sony LG Samsung
EX420 55EB9600 PL43E450A1FXZP
EX430 77EC9800 PL43E490B4FXZP
EX550 55EA8800 PL43E400U1FXZP
EX520 KN55S9C UN32EH5300FXZP
EX645 55EA9800 PL64E8000GFXZP
I'm using two Listboxes (Form Control) with multiple selection options namely Listbox 1 (Brand) & Listbox 2 (Models). I want listbox 2 input range to be depended on selection made on Listbox 1 (Brand). For example, if user selects Sony then box2 should show only Sony's models and if user selects Sony & LG, box2 should show models for both Sony & LG.
View 3 Replies
View Related
Apr 4, 2013
I am working on a project where user has to select an item from a listbox, however there is a condition that if user select an item, other items of listbox should be disabled so that he/she can not select any other item.
Is there any way to do that as I tried
VB : Listbox.enabled = False
and
VB : Listbox.locket = True
in Listbox - Click/Change but no desirable results got.
View 1 Replies
View Related
Sep 27, 2007
I have the following sheet which functions as a table to store values for files that have been created using the application which this table is in. In this app., I have a form with 2 listboxes. When the form loads, I have the first listbox list values which each of these files are listed under (i.e. - "sub-directories"). With a selection of one of the list values and clicking of a button, I want the second list box to list the values of cells listed in a range directly below where the selected value in the first listbox came from.
I'd prefer, in the first listbox, to have only the values of the ranges that have a value in them in the listbox. However, this would cause my listbox.selected(array) not function properly. But since my current offsets (in the second sub) do not seem to be working anyway, maybe I am going about this totally wrong.
View 9 Replies
View Related
Jun 10, 2009
I frequently receive workbooks containing up to 50 sheets and on most of them there is a selected area.
Is it possible to put a bit a code in the worbook when opening to clear all selected areas on all sheets.
View 9 Replies
View Related
Apr 24, 2014
I'm playing along with Excel. I discovered it doesn't like cutting and pasting in VBA. This screws up formulas in cells.
It much prefers copying and pasting. So this involves an extra step, going back to the cells you just copied and clearing them.
So I have a selection of cells and I just copied them to a different location. Naturally the location I just copied it to then becomes selected.
I would like to go back to the cells that have the dotted selection around them and clear them. If I simply use Selection.ClearContents it will clear the currently selected cells, NOT the dotted selection.
Command to clear the contents of the dotted selection?
View 4 Replies
View Related
May 9, 2006
I have the existing code below. What I would like to do is clear the ListBox of all previous records found prior to the next Find All event occurring. For Example I search for "M" and it finds 3 records and these are listed in the ListBox for the user to select from, then if the user searches for "Grealy" it finds 1 record and puts it in the list but the 2nd and 3rd record from the previous Find All event still remain.
I tried using the following code
Me.ListBox1.Clear
which clears the listbox but then as soon as you hit Find All following the above mention sequence you get the result as outlined.
Private Sub cmdFind_Click()
Sheet1.Select
Dim strFind, FirstAddress As String 'what to find
Dim rSearch As Range 'range to search
Set rSearch = Sheet1.Range("b2", Range("b65536").End(xlUp))
strFind = Me.TxtEmpName.Value 'what to look for
Dim f As Integer
View 4 Replies
View Related
Mar 17, 2008
I have some problems in VBA Excel List Box which I want to rectify. See an attachment " listbox. zip" file
I craated a Userform and Seven List boxes in it. the following problems I am facing.
1) When I change List Box 1 other List Boxes do not show with related data.
2) List Box 1 and List Box 2 show their header others List boxes not. Why?
3) I have defined Names of all ranges. How Can I use it in VBA Coding?
View 3 Replies
View Related
Feb 21, 2007
If I have a pick list, or drop-down list, in cell B21 and one of the options in that list is "Clear", how can I get the contents of cell C21 to be cleared when I select the "Clear" option in B21?
Constraint... Don't want to use VBA.
I am thinking of hiding a formula somewhere other than in C21 that evaluates B21 and does an If Then kind of deal to clear C21.
View 9 Replies
View Related
Feb 22, 2008
Is there are macro that will allow me to: Clear Print Area, then Set Print Area based on user selection and finally print the Print Area to fit 1 page? I tried to search for solutions, but couldn't find any that matched my problem.
View 2 Replies
View Related
Apr 25, 2008
I need to clear the contents of every other cell in a selection of 5000 rows starting with the first cell. Is there a macro that can do this for me?
View 3 Replies
View Related
Oct 24, 2006
On a userform, I have a listbox named "eList" containing Employee Names.
I have 2 other listboxes named "List_eTrained" and "List_eNotTrained" which list the Training completed and Training not yet completed for the selected Employee.
When I click Name items, it updates both listboxes with information (using "AddItem").
Before it updates, I use this code to clear the info listbox items:
TrainingDetails.List_eTrained.Clear
TrainingDetails.List_eNotTrained.Clear
When I run the form and click on various entries, it works as expected. At random though, I get this:
Run-time error '-2147467259 (80004005)':
Unspecified error.
And only this line is highlighted in Debug mode: TrainingDetails.List_eNotTrained.Clear
Sometimes it happens after going through several names, sometimes it happens when clicking the 2nd or 3rd name. It's only happening on the "List_eNotTrained" line though--the other line is fine--which has me really puzzled.
I'm hoping someone else has run into this before and might know what's causing this random, unspecified error.....
View 6 Replies
View Related
Aug 21, 2007
I have a saved file at d: named Report.xls from another file I am copying column and pasting data to this report file, this is done by a macro. While pasting data to the report file, a pop up message is coming up – A file named D:
eport.xls already exists in this location? Do you want to replace it?
In case “yes” is clicked it pastes the data But the problem is that the macro that I have in the report.xls vanishes. The macro I need in the report.xls?
View 6 Replies
View Related
Jun 13, 2008
A project I am working on calls for me to implement a macro that will clear the contents of a cell (but not affect the validation list it contains) based on the selection of another cell or cells. So on the simplified attached example, I need to achieve the following;
On the fist row of options, if cell "C3" is selected, then the contents in cell "D3" are cleared. If cell "B3" is selected then the contents in cells "C3" AND "D3" are both cleared. Similar is needed for the second row of options;
If Cell "C6" is selected, then the contents in cell "D6" are cleared. If cell "B6" is selected then the contents in cells "C6" AND "D6" are both cleared. Finally, if cell "A3" is selected, then ALL of the above cells' (B3-D3 & B6-D6) contents must be cleared.
View 7 Replies
View Related
Apr 13, 2012
I am trying to find something that would allow me to have a spreadsheet clear the contents of a certain cell based on the selection made from a data validation list which resides on the same row. This can best be described with an example.
The user selects anything but " " or "none" from the validation list, which for this example resides in C5, would trigger code to clear the contents, if any, in AA5. If " " or "none" is chosen the value remains.
This capability should be available for each row through 100.
View 3 Replies
View Related
Apr 26, 2014
On Select cell F6 my list box appear, however once an item is selected form the listbox, i cannot get it to appear in the active cell (F6).
code and where to place it to make this work
View 10 Replies
View Related
Sep 24, 2009
I was fortunate to get help on the listbox code but need to direct the selection to a different workbook than the one that contains the listbox. I'm not good enough to see what I'm doing wrong. Played around with different combos of selecting the workbook but can't get it to work.
View 14 Replies
View Related
Apr 21, 2012
I have a multi-select listbox on a spreadsheet and a Command Button to transfer the selections to the sheet. When I make the selections and then click the button, it only transfers the first selected item, then clears the rest of the listbox selections and the code ends. The code I have is:
For i= 0 To lsBallotedPlayers.ListCount - 1
If lsBallotedPlayers.Selected(i) = True Then
Sheet3.Range("F200").End(xlUp).Offset(1, 0).Value = Me.lsBallotedPlayers.List(i)
End If
Next
View 4 Replies
View Related
Nov 18, 2005
I have a listbox in my user form and it has a Rowsource of A1:A225, I need to be able to select a value in the list box and hit Command_Button4 to delete it.
Private Sub CommandButton4_Click()
DeleteName
End Sub
Sub DeleteName()
ListBox1.Value.Select
Selection.ClearContents
End Sub
Also, is there anyway to ignore blank cells in the listbox?
View 5 Replies
View Related
Apr 20, 2006
I am having trouble returning the value of the second column in a listbox.
The listbox is originally populated with an array (vaData) from an SQL query through
With UserForm3
With .ListBox1
.Clear
.ColumnCount = 2
.List = Application.Transpose(vaData)
.ListIndex = -1
End With
.Show vbModeless
End With
and then if i try to return the value of listbox1.list(1,2) elsewhere, there is an error "Could Not Get the List Property". Invalid Argument.
View 5 Replies
View Related
Feb 4, 2007
I have Listbox on my User Form with 10 items say "A", "B","C", and so on. I wnt User to select any one item or any two or three items or even all items. Whatever user selects will be transferred in one cell only like "a","C". Is it possible to do this with listbox ?
View 3 Replies
View Related
Oct 16, 2007
My userform has an update button that displays a listbox in a userform. The user selects from the list, chooses to update and another userform appears to request some additional information before saving it to a different sheet. This works fine, but how do I then delete the row containing the original item on the original sheet selected from the listbox at the same time?
View 2 Replies
View Related
Jul 24, 2009
I wrote some code that toggles bewtweeen the word "Yes" and the function clearcontents.
What it does not do, is if you click on cell A1 and change it's contents and you click on the same cell again it does nothing. You need to click on another cell say A2 before you can go and change A1 again.
My code is as follows:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
If Not Intersect(Target, Range("Documents")) Is Nothing Then
On Error Resume Next
Application.EnableEvents = False
If IsEmpty(Target) Then
Target.Value = "Yes"
Else
Target.ClearContents
End If
Application.EnableEvents = True
On Error Goto 0
End If
End Sub
View 3 Replies
View Related
Jul 28, 2014
What I'm trying to do is print only the selected worksheets from a listbox. I have created a UserForm and a ListBox which displays all unhidden worksheets in a workbook. The ListBox MultiSelect control is set to 1-fmMultiSelectMulti. I would like to be able to click CommandButton1 and send the selected worksheets to print, but going to Print Preview first. This is what I have so far:
Private Sub UserForm_Initialize()
'Displays only visible (non-hidden) worksheets in listbox2
Dim ws As Worksheet
For Each ws In ThisWorkbook.Worksheets
[Code]....
how I can modify this code to print just the selected worksheets?
View 6 Replies
View Related
May 16, 2009
In my workbook i have worksheets that are named 01-Jan-2008,15-jan-2008,30-jan-2008...and i have almost 50 for each year.from 2007 to 2009. I have created a userform where i have a Year combobox with values 2007,2008,2009 and an ok button
then in the same form, i have a listbox and an Ok button and a back button.
i want the user to be able to pick the Year from the combobox. once he specifies the year, the worksheets corresponding to that year should appear in the listbox...instead of populating it with all the 100+ wksheets i want the search narrowed down.
View 2 Replies
View Related
Dec 9, 2009
Is there a way to filter a listbox from the selection in a combobox?
View 2 Replies
View Related
Nov 22, 2013
How do we populate a List Box based on two Combo Box Selection on a userform?
Sheet2 has 5 Columns of datas all the way down...
Combobox1 is the Column A
Combobox2 is the Column B
View 3 Replies
View Related
Jun 16, 2006
Why this code doesn´t enter in the if condition when i don't select any item from the listbox
semana = ListBox1.Value
If semana = Null Then
MsgBox ("Need to choose one item!!!")
Else
emd = Range("A48").Value
End If
View 3 Replies
View Related
Jul 21, 2006
I have been trying to create a "Search" or "Look Up" form for my database. ( Attached file - "Test - Form").
I have been given a lot of help/ideas from this forum with which I managed to get to the stage where I could select the criteria i wanted to search by using a combobox and textbox in the userform. On hitting the "Find" button it shows all the results in the listbox.
The trouble started when I tried to display the listbox selection on the labels at the bottom of the userform. As the listbox is small and cant show all the fields properly, I need to display them in labels once user selects a particular record from listbox.
I managed to find some examples of this from this forum. (file attached "Action Log"). As I am not an Excel/ VBA expert, I have missed something and am not able to make it work.
View 9 Replies
View Related
Jan 25, 2007
I have created a userform to keep track of "Customer Call Cycle".
This is what I have:
1) I have 3 Sales Reps with 50 Customers each.
2) Each customer has multiple contact persons
I have a userform with 2 combo boxex, 1 list box, 1 textbox and 2 buttons.
I want to be able to select Sales Rep from the 1st combobox which will automatically populate the second combobox with customer names related to that sales rep.
and when I select a customer name from 2nd combobox, I want all the contact persons in the database that are related to that customer name to populate in the listbox.
View 9 Replies
View Related
