I have text in column F (cells 20 to 199) that changes automatically based on pre-determined time constraints (this is done via an IF formula). I want the 4 cells adjacent to F to clear contents when the text in F changes. For example when cell F126 changes text automatically, G126, H126, I126 and J126 all clear. If cell F99 changes, cells G99, H99, I99 and J99 clear. And so on.
View 9 RepliesWith code I enter text by double clicking in any cell in a range.(column A,B,C are excleded)
What I need is to clear the content of the cell adjacent to the left of the one I choose to dbl click AND the one below that.
Example: I dbl click in E1 and the content of cells D1 and D2 is cleared.
Been racking brain, searching through the forum here, and my Excel 2003 Bible all day trying to figure out this problem to no avail. I would like to clear the contents of any cell in a given range if the cell immediately to the right of is formatted as bold.
View 2 Replies View Relatedhow to clear contents and change colour index of cells.
This is for a booking system. The current VB codes allows bookings to be made by entering a reference number, dates of bookings and room type and bed type. When the VB codes are executed, the cells corresponding to the details entered earlier, would fill the booking table with the reference number and change the colour fill (e.g. yellow) to indicate that the slots are booked. Please refer to attached sample.
However, I do not know how to delete the booking. I would like to assign a cell for user to enter the reference number that needs to be deleted. So when the reference number is entered into that cell, user could execute a function which will clear the contents and change the colour index to none for that particular booking with that reference number(s).
Attached is a sample of the problem.
I have a list of values, some are like values, others are not. is there a way to have the column to the right automatically merge the cells which have like information to their left. Attached is a sample file. I want to be able to have the cells in column B automatically merge based on the values in column A. I'm not sure if this can be done, but figured I would ask before I spend hours merging cells.
View 2 Replies View RelatedI am relatively new to VBA. I am creating an attendance calendar that tracks employees calling sick, late etc.. It is a point based system. What I am looking for is, a way to clear the point value that was manually entered in a specific cell (I3), if there is a Value manually entered in (CU3). Each column in my worksheet is for a specific date ie; I3 is the cell where I enter the points (1.00) for that employee by calling in sick on 3/1/2013, (Column "I" is for 3/1/2013). After 90 days, this point accumulated by the employee does not count against them, so I need that point entered in (I3) to either = 0 or the cell contents to be cleared if there is a value entered in cell (CU3) which is 91 days after, so my (A3) cell does not add that point acquired on 3/1/2013.
I need this to run in a range (I3:I450) so if any value is entered into (CU3:CU450) it has the same result and continue to for (J3:J450) so if any value is entered into (CV3:CV450) and so on..
I need to write a condition in such a way that cell IF A1= "DBR","BPR","SLR","SKR" then change cell B1 to SPECIFIC COLOUR Each condition different colour. A1 values ("DBR","BPR","SLR","SKR") is a list of selectable values. if the condition is falls then B1 should be normal (white color cell) with 0 in it.
View 1 Replies View RelatedI am trying to make the colour of cell change depending on the result in an adjacent cell and have found and adapted the following:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer
If Not Intersect(Target, Range("x4:x202")) Is Nothing Then
Select Case Target
Case 11
icolor = 43
Case 21
icolor = 43
Case 31
icolor = 27
Case 41
icolor = 27................
If a INDEX,MATCH function returns a zero, how do I get it to use the value in the adjacent cell which is a unique number?
=INDEX(Sheet2!A:C,MATCH(A2,Sheet2!A:A,0),3)
Example:
This should be simple but this is not working like I want it too. It should change the value in the cell adjacent to the cell in column B if the value of the cell in column B = "X".
Dim Well As Range
For Each Well In Range("B:B")
If Well.Value = "A2" Then Cells(Well, Well - 1).Value = "SamplePlate2"
Next Well
I have a workbook with 30 worksheets. Each sheet has 84 rows of data (start in 15 columns (A to O). I would like to create a summary sheet that only shows the most important data from each sheet.
The summary sheet would have 12 lines of headers and formatted crap at the top.
The Summary sheet header columns would be:
Site (A), Date (B) Health (C), Status (D), Critical (E), Task (F),
Dependencies (G), Owner (H), T-Date (I), Task Date (J), Mitigation Date (I)
The data in the sheets are not in that order, of course.
That
1. puts the name of the sheet I am copying from in column A
2. the deadline date in Column B (that date is always in C10 of each worksheet)
3. and copies Cells from Column A,B,G,H,I,O in any row in which the value in A is not "good" into columns C through H. I would like to paste those rows into the summary sheet. I have code that loops through the sheets and rows in each sheet to find the rows to copy. I can copy cell values directly from the active sheet to the summary sheet, but because I am copying a cell at a time, it takes 7 minutes. Yes I am impatient :)
Here is the code snippet where the copying is done:
Dim sh As Worksheet 'current worksheet
Dim DestSh As Worksheet 'worksheet in which to paste summary
Dim Last As Long
Dim CopyRow As Long 'row to copy
Dim LastCopyRow As Long
[Code] ........
ExitTheSub:
Application.Goto Sheets("KMARollup").Cells(1)
End Sub
I think there must be a way to use ranges to build an array of cell values and paste only once but I am lost here.
If I have 2 columns A and B, I would want cells in A emptied if cells in column B is empty. Otherwise, ignore.
View 3 Replies View RelatedHere's what I'm working with:
??
5
3
4
1
Total 13
5
6
7
2
Total 20
Is there any way I can sum only the cells in the right column where the left column contains "Total"?
I want to create a macro that will run through a column and assign a name to each cell in that column that reflects the contents of another cell within each row.
for example, cell A1 = "Gerry", A2 = "Rob", A3 = "Ryan"
I would then like the Name of B1 to be "Gerry", B2 to be "Rob", etc (but to retain original contents).
Is this possible using VBA?
What I want to achieve: those cells have number 1 ( in column E) , adjacent cell values ( In Column D) are copied to G12 in the following format:: Mark,Lark ( i.e. cell value , cell value, etc)
is it possible ( with a command button) Sample attached
Here’s what I want to do in VBA
1. Put a value in cell H1 (text and numbers)
2. Find a matching value in column A (starting in row 2), error message if the is not a match.
3. Copy the adjacent cell column B (rows vary) to the clip board. It would copy until it found the first blank row.
I have attached a scaled down version of the spreadsheet, the one I use has 100's of codes. I know some VBA but not much. I searched the forum but could not find anything.
I am making a workbook where the G column is drop-down menus that are populate a drop down on the H column. Whenever someone changes the selection of the G column I was to erase what is in the corresponding H column. I have this code that works, but I need to do this for 100 lines. Is there any way to put this into a loop instead of writing 100 if statements?
View 6 Replies View RelatedI am quite a novice with excel and I am trying to get a cell to show blank when I select a drop down list value in another cell.
Cell D2 contains a validated list containing two items (Air, Vacuum).
If I select Vacuum I wish to change another cells (D4) contents to blank, D4 is also a validated list containing three items (Yes, No, BLANK) the blank is actually a blank space and not the text blank.
I can get the cell to operate correctly but if I select Air in Cell D2 and then Yes in cell D4, but then change my mind and reset to Vacuum in cell D2 i need the cell D4 to clear its contents automatically.
The worksheet (Payments) contains a list that allows the user to input accounting transactions. Almost every input cell contains a formula or data validation enabling selection from a dropdown.
The worksheet feeds the data to 3 separate spreadsheets (Debits / Credits / VAT) and the formulas for that are contained within dynamic ranges in the other 3 sheets. A command button macro then feeds that data from the 3 sheets to the Master sheet. This all works perfectly.
After the macro is run and the data is copied to the Master sheet, I would like all of the data in the 4 other sheets to be cleared without losing the formulas and data validation, ie so that the sheets are empty and clear for the next batch of inputs.
I have been reading through trying to find a similar post but the nearest i could find was one dealing with numbers rather than text. This is how the workbook looks.
Column A contains a list of numbers based on vehicle types. Column B contains a list of vehicle names.
A B
1 Car,
1 Taxi,
2 Bus,
2 Lorry,
3 Skateboard,
3 Bike,
1 Motorcycle,
What I am looking for is the best way to combine the text from column B depending on the value of column a. the finished results would then end up as: "Car,Taxi,Motorcycle,", or "Bus,Lorry," etc. This is just a simple list.. The one I am working with has around 2500 entries. I have been trying to do this using the CONCATENATE function and IF statement but it's just not working..... My head is ready to explode
I have a list of 20,000 addresses and because of the way the sheet gets populated by different departments, the COUNTRY CODE and POSTAL CODE columns get their data reversed.
Instead of 48193 US, it gets put in as US 48193.
Since i have some many, and they are not in order at all (I could probably sort by COUNTRY CODE and get 95% of the in order (except for those pesky Canadian codes), is there a macro way out of this?
Even if I select two adjacent cells and run the macro and have the contents switch. Or if there is a way to do the 95% all at once.
I have created a worksheet with many calculations based on user input into several unlocked cells. I would like to create a cell that when selected, would clear the contents of this group of unlocked cells.
View 10 Replies View RelatedI am currently using this Code to search column1 for a Key Word that is entered into textbox "Kunde" on my userform.
[Code] .....
What i would really like to be Abel to do is :
Search for the cell in column1 with =Kunde.Value
Clearcontents of this cell and the 2 adjacent to the right.
i.e. Word is found in A7
Cells A7:C7 contents are cleared and fill Color returned to default colorindex 0
I have two rows of numbers, say D1 to F1 and D2 to F2. Row D2 to F2 will always have lower values.
The range below it is D3 to F100. I want the range to clear the contents of the cells in the range where:
a) the cell is > the x1 cell above it
OR b) the cell is < the x2 cell above it
If it is = or between the two cells, the value stays.
Example:
If D1 thru F1 is 4, 5, 7 and D2 thru F2 is 2, 4, 3, then:
D3 is 5, it is cleared
E3 is 4, it stays
F3 is 5, it stays
D4 is 2, it stays
E4 is 1, it is cleared
F4 is 9, it is cleared
Etc
Basically, the cell in the range looks up its own column, compares itself to x1 and x2 in that column. If it's greater than or less than, then it clears the contents, if not, the value in the cell stays.
I'm trying to create macro that will clear the contents of the cells in the 4 columns to the left of a cell that = 0 %, as well as the cell that = 0%. For example, if cell F13 = 0 % then the contents of B13:F13 would need to be cleared. The range in which data is being pasted into is B13:F27.
View 4 Replies View RelatedA project I am working on calls for me to implement a macro that will clear the contents of a cell (but not affect the validation list it contains) based on the selection of another cell or cells. So on the simplified attached example, I need to achieve the following;
On the fist row of options, if cell "C3" is selected, then the contents in cell "D3" are cleared. If cell "B3" is selected then the contents in cells "C3" AND "D3" are both cleared. Similar is needed for the second row of options;
If Cell "C6" is selected, then the contents in cell "D6" are cleared. If cell "B6" is selected then the contents in cells "C6" AND "D6" are both cleared. Finally, if cell "A3" is selected, then ALL of the above cells' (B3-D3 & B6-D6) contents must be cleared.
I have two columns. The first one (A) contains cells that have different Fill colors. The second column (B) contains text adjacent to the colored cells. I am trying to change the color of the text in the second column (B) to the corresponding color in the adjacent cell in the first column (A). I don't think conditional formating works well in this situation. I believe the solution would be some sort of macro.
View 3 Replies View RelatedI have a column of dollar amounts (variances) and next to each is the shift they belong to.
I am looking to get a break down of the variances for each shift.
Attached is an example of what it looks like.
I have a column of dollar amounts (variances) and next to each is the shift they belong to.
I am looking to get a break down of the variances for each shift.
Attached is an example of what it looks like.
I'm trying every conceivable angle I can think of in vba and coming up empty. What I have is a spreadsheet similar to this:
Column A Column B
1. 1234567
2. 2345678
3. 3456789
4. 4567890 A0001
5.
6. 9876543
7. 9876543
8. 9876543
9. 1234578
10. 3456789 A0002
What I would like to do is to fill in B1:B3 with A0001 and B6:B9 with A0002. The number of rows in each set of data will vary, but the identifier (A000X) will always be located in the row in column B adjacent to the last entry for that set of data in column A and there will always be empty cells between data sets. The number of data sets will also vary.