I have a column of dollar amounts (variances) and next to each is the shift they belong to.
I am looking to get a break down of the variances for each shift.
Attached is an example of what it looks like.
I have a column of dollar amounts (variances) and next to each is the shift they belong to.
I am looking to get a break down of the variances for each shift.
Attached is an example of what it looks like.
I need to add data from b2:b12,d2:d12,f2:12,h2:h12 and to show the totals in L2:L7
View 5 Replies View RelatedI’m trying to make my life a bit easier, by adding a few macros and formulas to the spreadsheet (Everything was done completely manually before I got here!!!).
What I would like to do is take two columns, which contain a start and end time for work shifts, and colour them GREEN once I have entered a name in the Worker column (Along side the two with the time), and also to fill a cell with a Yes or a No. I’m aware of auto conditioning, and I’ve tried to have a play to get this to work, but I just can’t work it out.
I have posted a link to an image which shows what I want. I hope I've explained it well enough!
http://img530.imageshack.us/img530/6239/excelspfk0.jpg
I have some text in a cell, which is longer than the width that I am going to make that cell. When I don't wrap the text, it cuts it off at the end of the cell.
Since each column represents a day in a calendar, it would be incorrect to merge the two cells, but I don't want the text hidden, since I need to print the final product.
It is non-numeric text, and i've pasted --> values to remove formula issues.
Attached is a sample of a excel file I am using for tracking overtime.
On the sheet labeled tracking I want to gather data of the other sheets based on a date range.
All sheets other than the tracking sheet will be labeled in the date format mm-dd-yy.
On the tracking sheet in cells B2 & B3 will be the date range that I want to gather the data from.
There is 3 columns of data that I want to gather, "Balancing" "Approved" "Unknown".
I would like to return just a sum of these from the dated sheets M3:O42 based on the employee name A3:A42
A2:A5 contains different dollar amounts, a6 is the sum of those amounts
In column B (B2:B5), i place a "p" beside the amount in column A once it has been paid.
I want to:
a. conditionally format the amounts in column a to turn green once I put the 'p' in the adjacent column
b. conditionally format the sum in A6 to exclude amounts that have been paid, and only display the total amount of the unpaid lines.
Here's what I'm working with:
??
5
3
4
1
Total 13
5
6
7
2
Total 20
Is there any way I can sum only the cells in the right column where the left column contains "Total"?
Been racking brain, searching through the forum here, and my Excel 2003 Bible all day trying to figure out this problem to no avail. I would like to clear the contents of any cell in a given range if the cell immediately to the right of is formatted as bold.
View 2 Replies View RelatedI have been reading through trying to find a similar post but the nearest i could find was one dealing with numbers rather than text. This is how the workbook looks.
Column A contains a list of numbers based on vehicle types. Column B contains a list of vehicle names.
A B
1 Car,
1 Taxi,
2 Bus,
2 Lorry,
3 Skateboard,
3 Bike,
1 Motorcycle,
What I am looking for is the best way to combine the text from column B depending on the value of column a. the finished results would then end up as: "Car,Taxi,Motorcycle,", or "Bus,Lorry," etc. This is just a simple list.. The one I am working with has around 2500 entries. I have been trying to do this using the CONCATENATE function and IF statement but it's just not working..... My head is ready to explode
What I want to achieve: those cells have number 1 ( in column E) , adjacent cell values ( In Column D) are copied to G12 in the following format:: Mark,Lark ( i.e. cell value , cell value, etc)
is it possible ( with a command button) Sample attached
I have a spreadsheet with data populated down column B. This size will vary from day to day so is there a macro I can run that will populate Column C with a formula based on their being data in the adjacent cell.
View 2 Replies View RelatedI have two columns one of which has filenames and the other having values. I need to creating a macro that takes each value from a cell outputs it into a text file and then saves it with the filename of the cell next to the value. I'll need it to go down the columns and create separate text files for each.
View 7 Replies View RelatedI have a spreadsheet with 'due date' for returns in column L and 'received date' for returns, in the adjacent column M.
I would like to get the due date to turn red when it is overdue, ie. the date in the cell has arrived and no return was submitted. By trawlling the forum, I managed to accomplish this with the following in conditional formatting:
Cell value is less than or equal to =TODAY()
All's great.....but - I would like the date to turn back to black if I enter a date in the adjacent received column, column M.
In other words, I want to flag a problem if the due date has passed, but once I receive the return and enter the date I receive it, i would like the due date entry to revert back to the original formatting ie. black. So only the outstanding returns are highlighted.
I have a selection of data that lists sellout information for 45 different Cable networks. What I'm hoping to accomplish is to have (on a separate sheet) a function that will automatically pull out the top 10 networks based highest sellout percentages and list them in order from highest to lowest. I don't even know where to begin or if it is even possible to set up as an automatic function.
View 3 Replies View RelatedI want to search for a word in column A and when I find it I want to copy it to column B.
Column A is a description that can be 6 or 7 words long. Column B is a single word.
Example:
Col A
Engine Kit, V-8, 306, forged.
I need to copy the word Kit to column B.
What I have In Column B, I have the datesIn Column I, I have engineers name What I need I want a macro to generate Serial Nos. (1,2,3....... n) in column A If an only if the date in column B is today's date and the engineer's name matches with the PC's username
The following is my code
[Code] ....
Above code runs without errors but does nothing.
I am trying to merge text, in four adjacent cells in the same row (say cells A1,A2,A3 and A4), into a single cell (say cell A5).
I would like a comma or full stop and then a space between each item merged (cell A5).
The text to be merged may appear in any one of the four cells (cells A1 to A4). Those cells without text are blank.
Only where all 4 cells are blank, will I need cell 'A5' to indicate this.
The formula needs to be relative as I will need to copy the formula down the spreadsheet so that it applies to additional rows.
I have a series of employee variances and dates for the variances in two columns.
I have another section on the same sheet where I want to track the amount of variances & occurances for certain months.
attached is an example of what I am looking to do.
I have 2 tabs in a 2013 workbook. Inventory Receipts and lookups. One of the Data verification lookups I have is a drop down list in each cell in Column B (eg: Cat, Dog, Mouse) In the lookups tab I have another cell range containing the sounds (eg: Meow, Bark, Squeak).
What I am trying to acheive is, if B2 contains Cat, then return Meow in B3, if B2 contains Dog then return bark in b3 and if B2 contains Mouse return squeak in B3. Ideally I would like the formula to return the text from my lookup sheet (eg: 'Lookups'!C2,'Lookups'!C3,'Lookups'!C4). So depending on which option they choose from my animal drop down list .. the correct noise would automatically fill in.
ok lets say you have thousands of rows of raw data and you are running vlookups to pull specific data from the raw data to update your spreadsheet. Your raw data consist of some new ideas so when you vlook up, you get an error. In my case i get about 50 errors all spaced out amoung the thousands of rows or raw data. I would like to create a formula that would go and find the error and output a code/value that already exist in the raw data and output that in Cell D1 for example. The it will go and find the second error and output that into cell D2 and then the third error and output that into D3 and so on.....
The idea is that when its done a list of all the errors will have been created so then i can use other formulas to simple add the new info to the workbook. Instead of search through thousands of rows for the errow.
I am trying to append data in let's say column A:A with the variable text in J:J. The data in column A:A will look like this /dir/dir/dir/<from this point is where I need the data appended>.
View 4 Replies View RelatedIn the attached WB I managed to write some code (behind Sheet1) to change the Source table, itself, into the requested layout. My question is - could this be done by ONLY Worksheets functions - preferable without any helper column - if possible. note that all 4 columns data should be transported to the target table. The upper left cell of the target/new layout table can be put in cell G1 or in cell A15.
View 4 Replies View RelatedHere's an interesting one:
A1 contains a text string which is both bold and unbold (
B1 is blank
I need a macro which scans the cells with text and copies the BOLD portions of the text string into the adjacent cell.
Example:
A1
The sky is blue
Macro is run
B1
sky blue
how to Chk the text string in particular cell, compare it with a super set column and get the full from of the text string from another corresponsing column and the output will be corresponsing full form of the chked text string?
View 6 Replies View RelatedI would like to highlight the rows in my spreadsheet where columns G and H both contain the text "Yes". I've tried conditional formatting and VBA but can't seem to get either to work for what I need.
View 3 Replies View Relatedhow to cut a string from text and copy it to another cell: Example of a TEXT:..........................
This is Text in one cell - I need to cut the BOLD part. It always ( if appears ) is after statement <b>Kod Producenta</b>: and before <br/> It's not always in the same place. but always between statment above. "<b>Kod Producenta</b>: STRING_THAT_NEED_TO_BE_COPIED_TO_DIFFERENT_CELL <br/>" how can i do it with VBA macro? with cpp would be so much easier but still i need to do this in VBA...
I have multiple sheets cataloging multiple vehicles' mileages in multiple areas (one sheet per month). I want to reorganize this data by Vehicle ID rather than month.
Here is an example spreadsheet to help explain
I have attempted this by writing this formula ...
Picture1.jpg
How do I create a CF if a cell is blank (in my case represent no sales) i want to have it yellow (ex. C2)
But if it has two consecutive blank cell i want to CF with Red. (Ex. F3)
But i also need to exclude blank cells when we we have no previos sales of that item (Ex.B3).
Based on a trigger point (being a month), and the number of times the expenditure is spread over (factor), can I formulaize the repetition of the figures?
Sheet1 *CDEFGHIJKLMN5***Trigger Points**Desired result via formulae
**6CostFactor*JunJulAugSept*JunJulAugSept7
£ * * * *10,000 2**1**** £ * * * *5,000 £ * * * *5,000 *8 £ * * * * *6,000 3*1**** £ * * * *2,000
£ * * * *2,000 £ * * * *2,000 *9 £ * * * * *8,000 1***1**** £ * * * *8,000 *