Though VBA is very similar to VB6 (which is what I took a course in a few years ago) there are some things I can't figure out. One of them is ending and closing a procedure (i.e. if an "if then" statement is not met). In VB6, if I remember correctly, you would use "Me.Close". What is a similar method in VBA for taking this action?
View 2 RepliesI have a userform which opens when the workbook opens. Ideally Id like to have the userform open without the workbook coming up and have the workbook close when you close the userform. If thats not doable then is there a way to just close the workbook when the userform is closed?
View 3 Replies View RelatedIs there any way to have a macro, that is started from the immediate window, close the immediate window when it's done. My macro closes the immediate window, but as soon as it ends, the immediate window reopens and my cursor is inside it.
View 14 Replies View RelatedOk so my code below works fine except for when the user selects yes to the prompt and cancel in the save box. When that happens excel attempts to close and crashes. I want it so if the user says yes initially and then hits cancel the sub will cancel and the workbook will stay open.
View 2 Replies View RelatedI have a macro that once it's run, it quits the application. The problem is that once it activates, it closes all the excel worksheets. What I want to happen is that if it is the only excel workbook open I want the application to quit, but if there is another workbook open I want it to just close itself only and leave the other ones alone.
I have a perfectly functioning piece of code. There is still one snag, however. In the process of running the macro, three new workbooks are opened. I would like to close all three of those workbooks at the end. I am using the following procedure for each of the sheets:
To open the worksheet
Code:
Dim wb As WorkbookMsgBox "Please select the Stakeholder File"SHFile = Application.GetOpenFilename("Files (*.xls),*.xls", , "Please select the Stakeholder Workbook")If SHFile "False" Then Set wb = Workbooks.Open(Filename:=SHFile)
To close the worksheet at the end:
Code:
If Not wb is Nothing Then wb.Close SaveChanges:=False
The only problem is that I am getting bugs when closing multiple workbooks (3). I have assigned the names wb, vb and ab to the three workbooks.
I recently added some code to close a file after a few minutes of inactivity. (Here's the sub code)
Sub time_out()
If Timer - LastEventTime
The following code is not working for me in the "ThisWorkbook" section:
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)
Cancel = True
End Sub
Anytime a change is made it still asks if I want to save changes.
Also,
What code could I assign to a CommandButton that only allows a "Save As" function?
I have a macro in a workbook (WB1) that opens another workbook (WB2). After performing several other macros through user invocation with buttons, I close WB2 with the following statement:
Windows("WB2.xls").Activate
ActiveWorkbook.Close (False)
While the WB2 workbook closes okay, the WB2 project is still open in the VB editor. Does anybody know why this code isn't closing the project in the VBE?
The WB1 process can occur multiple times while Excel is open and each time a separate occurrence of the WB2 project is left open in VBE.
I have some VBA code which opens another workbook, copies data from the first sheet in there and pastes into the current sheet before closing the workbook it got the data from. Is there any way of suppressing any messages associated with closing the other workbook? i.e. do you want to save - or possibly automatically generating a no message to the prompts?
View 3 Replies View RelatedI have an error that just began occuring as I am developing a VBA application in Excel.
Whenever I close the workbook, an Error 91 occurs. The VBA editor opens and a line is highlighted within my combo box change event. It is stating that the combo box item no longer exists.
The combo box actually resides as an embedded control with a sheet.
I'm trying to close a workbook without saving it. But everytime I get the message box popupped twice.
These are the codes that I use:
VB:
Private Sub Workbook_BeforeClose _(Cancel As Boolean)
Dim YesOrNoAnswerToMessageBox As String
Dim QuestionToMessageBox As String
[Code].....
A1 cell includes; Dividend Payment : TWITTER (National Market) %39,06 (Closing Price: 5,28 Dolar), Cash Dividend I want 5,28 result in B1 cell ?
A2 cell includes; Dividend Payment : FACEBOOK %5,00 (Closing Price: 53,18 Dolar), Stock Dividend I want 53,18 result in B2 cell ?
In order to understand my question open enclosed file.
Note1: "Closing Price:" text in the cells are stable.
Note2: "Dolar" text in the cells are stable.
I have 4 employees who at the end of their shifts have to email me an excel workbook. The issue is that some of them are forgetful and after placing numerous post-it notes on their monitors one particular employees just forgets.
What i want to do if possible is that when the workbook gets closed, a pop-up window shows up on their screen reminding them to send the workbook. Even better would be if their was a button that they could click that would email the workbook as an attachment in the pop-up box.
How can I get my workbook to automatically re-protect a single worksheet in a workbook at the save-then-close point? It doesn't need to be password protected.
View 5 Replies View RelatedI have a spreadsheet with one column for each day. I've grouped the days into months and now I would like to minimize (minimize each month) Is it possible to close all, without having to select each group?
View 1 Replies View RelatedUsing the following line of code, I am able to open a vnc session:
[eq1] = Shell("C:Program FilesRealVNCVNC Viewervncviewer.exe " & " -config " & """C:Program FilesRealVNCVNC Viewerzva.vnc""", 1)
How to close this connection?. If I send alt F4 using sendkeys method, it is going to the computer to which vncviewer is connected, not to the computer running vncviewer?
I've created a macro which copies the current tab to a new workbook (Book X):
[Code]....
I then manipulate the copied data in Book X. Once this is done I move the manipulated sheet back into original file
[Code] .......
The problem i'm having is I'd like to close the newly created Workbook X file once the macro has run but Workbook X is usually called Book2, Book4, Book7, Book32 etc.
Workbook X will always be the previous file if i use the ALT TAB shortcut.
Is it possible to pop up a message when closing the workbook?
if so, could the message only popup if a certain cell is negative?
For example, This is what i would like to happen.
When workbook close is activated:
If cell A1=(-20), then pop-up "Please check your work and correct".
else, close workbook
How do I SAVE and CLOSE Workbook and it's instance of Excel.
I have other instances of excel open that I do not want closed.
I thought that I had this before, but I can't find it if I did. I do keep a list of all the requests where I ask for help and it's not in this list.
In my spreadsheet, a series of macros calls an external program/application three times.
Each time the program finishes, it (and not Excel, as I formerly thought) opens a resource (*.res) file in Notepad, which of course goes into the taskbar. Since I need to run the spreadsheet seven or eight times in a row, the taskbar can get cluttered quickly.
The program opens three different instances of the same filename: iroutine.res.
Is there a way to get Excel to close these Notepad files (if it's simpler to do, it can kill all instances of Notepad) when it finishes running its routines?
Hi everybody, I'm doing my first excel application program and everything is going good,
but I have one problem.
I want to click on a command button in one workbook that is supposed to lead me to a specific sheet in another workbook and to close the first workbook.
I used the following ....
When user close the file, I want to make sure certain sheets can zoom to 80%. How can this be done using VBA?
View 1 Replies View RelatedI have code that opens a .pdf file and copies the content to an excel spreadsheet.
However, in order to loop through multiple pdf's, I need to be able to close the Adobe Reader application before I open each new pdf file.
With excel being the active application, any suitable code to activate and close Adobe Reader?
I wrote this macro where, from a userform, I click a button and it will fillout another form with certain data from the original WB to a different WB.
All is working fine and exactly the way I want it except, it won't close and save the other sheet. It will go back to the userform, as I want it to, but it will leave the other file in the background open.
This is the code:
Code:
Private Sub CommandButton6_Click()
'Allocation file fill out
Dim alloc As String
Dim allwb As Workbook
Dim ABA As Workbook
Dim Prompt As String
'Dim fd As FileDialog
Set ABA = ThisWorkbook
[code]....
At the moment, there is no compile error or runtime error, but if I manually attempt to open the file (that was successfully read from), I get the message that the file is already open and is locked by myself (the user) and that multiple Excel processes are still running (I checked the task manager).
How do I close this Excel file (no changes to be made since I only read from the file) and quit Excel from running ?
Here is what I have at the moment :
Dim FirstName, Surname As String
'file path and name for the Excel file
Dim FileNamePath As String = "C:UsersMRCDesktopMRC FilesVisual Basic FilesSwimManager 2014CurrentSeasonDATASquadData.xls"
[Code].....
Something seems to have happened to my Excel. When I make changes and close the workbook or application, the pop-up box asking "Do you want to save the changes you made to [Book1]?" no longer shows up.
So far I've tried running a macro with Application.DisplayAlerts = True, but that only seems to work while the macro is running.
Well I seem to be having an issue in a form i created. What happens is that when the user clicks a button it saves a worksheet of workbook as its own file, problem is that it will actually open the new worksheet as a workbook when I really just want it to save without opening a new instance. Here is the code
Dim IntWirefilename As String
Worksheets("Intwires").Select
Worksheets("Intwires").Copy
IntWirefilename = "International Wires Database"
Worksheets("Intwires").SaveAs FileName:="File Path" & IntWirefilename & (".xls")
Workbooks("File PathInternational Wires Database.xls").Close
I think the problem lies in the last line or it could be from the select and copy part.
I do not want it to open a new file after it saves it. Also can anyone help create a part that will bypass the overwrite existing file thing so that this file will just continuously save as the same file name rather than prompting the user constantly to Overwrite the file.
I have my VBA Code set up to open a specific file and copy paste that information into this open spreadsheet in a particular sheet.
The only problem I have is that I don't know how to close the document once its opened.
I know that I can manually close it, but I want my macro to take care of it for me.
If anybody has suggestions, they would be greatly appreciated.
Here is my code so far to help out.
Sheets("Ann Ret Data").Select
Range("A1").Select
Workbooks.Open Filename:="P:InvINVpubAndrew EdgarMarket Value Projectperformance_data.xlsx"
Columns("A:G").Select
Selection.Copy
Windows("Qtr-End Market Value Project2.xlsm").Activate
Range("A1").Select
ActiveSheet.Paste
Also the file I want to close is the Performance_Data.xlsx file.
1. I am opening several Excel Workbooks and copy ( consolidate) this one into one worksheet in a separate workbook.
2. I want to close those workbooks automatically that I opened once it was copied and pasted to the Target worksheet.
3. The workbook that should remain opened should be the target workbook.
4. The codes below allowed me to open multiple workbooks at the same time and copy them to target workbook but I do not know how to close them automatically.
Sub OpenFilesOnNetworkDrive()
Dim i As Integer
Dim Filt
Dim FiltIndex
Dim Title
Title = "Select files: Hold Ctrl to select multiple files."
Filt = "Excel Files (*.xls),*.xls," & "Text Files (*.txt),*.txt," & "All Files (*.*),*.*"
FiltIndex = 1