I was wondering if there is any code using an on-click method. When clicking a button i need excel to exit the file/sheet without saving (no prompts) and then re-open the exact same file/sheet once it has closed.
In a way this is like a refresh button.
I have code in VBA that takes a source Excel file and parses it to multiple re-formatted worksheets. Each formatted worksheet is different depending on a variable in the source. There are n of each type of data (1:n Water Sources, 1:n Water Treatment, 1:n Water Storage). Each item needs a copy of a blank re-formatted worksheet appended to the end of the existing data-type worksheet. For example: Water Source #2 is appended to the bottom of Water Source #1 on the same worksheet.
Currently, I am opening the blank re-formatted workbook each time an additional variable of same type is found in the source file. Meaning, if there are 8 Water Sources, I am opening and closing the blank re-formatted workbook 7 times to copy a blank Water Source to the bottom of the Water Source worksheet and then populate the data. AND if there are 3 Water Treatment, I would open and close the blank formatted workbook 2 more times to copy a blank Water Treatment to the bottom of the Water Treatment worksheet. The same goes for Water Treatment.
Obviously, a huge waste of resources and performance. I would rather open the blank re-formatted workbook once (first time an additional worksheet is needed), use the worksheets as needed, and close it at the end.
Attached is my current, working code of the above.
How should I re-write it to check if the blank workbook is already open use it, if not open it?
Code:
Sub Add_Facility(ByVal Worksheet_Name, Copy_Range, Max_Limit)
Dim Last_Row As Integer
Dim Source_Range As Range
Dim Dest_Range As Range
Dim wkb As Workbook
Set wkb = ActiveWorkbook
[Code] ........
Excel will hang up as if it's gone into a continuous loop (Although no looping macros are active) when you open or close a user form. The task bar in Excel will flash Ready Calculate. Visual basic reports no code is running but excel either crashes or becomes very unresponsive. I have to exit and reopen excel in order to fix the problem . It also doesn't happen at any one specific point it can vary. I have various VLOOKUPs around the workbook and userforms display the correct information. I use the INDEX formula in the control source of textboxes. I also use the offset formula to make sure DTPICKER displays correctly.
I am using 'Option Explicit' at the start of all my code. I have tried a 3rd party code cleaner. No visual Basic references are MISSING
[URL]
At the moment, there is no compile error or runtime error, but if I manually attempt to open the file (that was successfully read from), I get the message that the file is already open and is locked by myself (the user) and that multiple Excel processes are still running (I checked the task manager).
How do I close this Excel file (no changes to be made since I only read from the file) and quit Excel from running ?
Here is what I have at the moment :
Dim FirstName, Surname As String
'file path and name for the Excel file
Dim FileNamePath As String = "C:UsersMRCDesktopMRC FilesVisual Basic FilesSwimManager 2014CurrentSeasonDATASquadData.xls"
[Code].....
loop and range function to apply in the below code through which I can avoid writing code for all the rows.
I am trying to open excel files located in single folder from files name (along with the path) in single worksheet (Column B and Row 1 to 500).
I have created follwing code which opens the file and then runs a macro in it.
a Sub Test()
Dim strFName As String
strFName = Sheet1.Range("B2").Value
[Code].....
I want to delete some unwanted rows on closing my excel file. the blank rows are between set of datas. so it has to check all the blank rows, delete it until the last one. example
data
blank rows
data
blank rows
data
blank rows
data
I am using MS Excel 2010.
What I want to Hide two worksheets and leave one worksheet open when I close out the file.
ws TOC will remain open when closing out the file
ws Rqmts will hide when closing out the file
ws Planning will hide when closing out the file
Hi everybody, I'm doing my first excel application program and everything is going good,
but I have one problem.
I want to click on a command button in one workbook that is supposed to lead me to a specific sheet in another workbook and to close the first workbook.
I used the following ....
I know that the shortcut to create a group is Shift + Alt + Right arrow but is there a shorcut to open and close the group?
View 1 Replies View RelatedI do not understand why my code returns a Run Time Error"9" Subscript out of range. With the following code, I opened a workbook and then wish to close that same workbook without saving. Eventually I will be pulling information from the workbook but for now I just want it to open and then close right away.
Private Sub cb_NewDate_Change()
ListIndex = cb_NewDate.ListIndex
If ListIndex = 0 Then
Application. ScreenUpdating = False
Workbooks.Open Filename:="I:JoeNetwork Conversion FactorsNetworkConversionFactors_Ver_2_0_0.xls"
Application.Workbooks("I:JoeNetwork Conversion FactorsNetworkConversionFactors_Ver_2_0_0.xls").Close False
End Sub
I have a problem, where every time I close or open any workbook, Excel prompts me to "Enable or Disable Macros" in one particular workbook, wether I have tried to open it or not. In the said workbook, I have a macro that automatically updates a pivot table upon selecting the worksheet where the pivot table resides.
The code for it is as follows:
Sub UpdateIt()
Dim iP As Integer
Application.DisplayAlerts = False
For iP = 1 To ActiveSheet.PivotTables.Count
ActiveSheet.PivotTables(iP).RefreshTable
Next
Application.DisplayAlerts = True
End Sub
Private Sub Worksheet_Activate()
Call UpdateIt
End Sub
There is something in the code that calls UpdateIt any time a workbook is opened, closed or selected.
I'm using Excel 2007. I didn't change a single option but for some reason this problem came up. When I open an already saved Excel file it opens up in a newly created file. For example, if I open a file saved as "Monthly Sales" it will open it up and rename it as "Monthly Sales1." When I go to save it again, which would normally just save it where it currently sits, it basically acts as if I hit Save As and pops up the box asking me where I want to save it. This is extremely annoying as most of the places where these files are saved are several folders deep which makes it time consuming every time I open and alter a file. I can't find any options that looks something like this and it only happens in Excel.
View 9 Replies View RelatedI am running a script that populates about 70 or so workbooks based on information from the database. Naturally this script is quite slow but what seems to take the most time is opening and closing workbooks. Is there a way to "hide" the workbook opening/closing operation on the screen? I have tried using the
Application. ScreenUpdating = False
this sped the code up but you still see the workbooks opening on the screen.
I have a file that is on a server. When I open it on my excel it opens an old version of it and not the newest copy. If I open it on a coworkers computer, it does open the correct newer version. How do I change this?
View 4 Replies View RelatedI have an excel add-in which is a ribbon which houses a great deal of financial tools that I use on a regular basis so I don't have to hunt around excel for things I use regularly. The add-in has always loaded automatically whenever I opened excel - whether I opened excel by creating a new blank document or by double clicking a previously existing file.
Starting a few days ago though, the add-in only opens when opening excel by creating a new blank file. I can't think of anything that changed recently. Using Excel 2007.
Even when opening a file by double clicking, Excel still says the add-in is active (in excel options).
is it possible to change the settings on your computer so that when you open Excel, it opens it as a certain type of file? I like working with .xlsb because I work with large sets of data all of the time and find that they open faster and are faster to work with. Currently every time I open Excel, it opens as .xlsx.
View 1 Replies View RelatedI am trying to open an Excel file that was emailed to me in zipped file that requires macros. When it asks me if I want to enable macros it gives me an error and will not open. Is there a setting I need to change?
View 5 Replies View RelatedI am trying to open excel files in a file path which includes folders which also have excel folders i wish to open there are quite a few.
At the moment i am working with this code but it fails to open excel files which are within the folders in the specified file path. Its fine for excel workbooks in the folder specified by file path.
This is the code
Sub RunCodeOnAllXLSFiles()
Dim lCount As Long
Dim wbResults As Workbook
[Code].....
I need to combine AHK and Excel, and in this I came up with the solution to save my parameters in a file, and let the workbook autoload it when I open the workbook. To do this I need to pass a command line parameter, or working directory to the workbook, as I will be using many different work directories for this to make sense.
This is only a matter of how to execute my workbook so that the path is included (and usable) to the working directory
I have tried
..workbook-name.xlsm /p "workdir"
But it results in a "grey" version of Excel aka. Excel is open, but no workbooks are.
I have also tried
excel.exe workbook-name.xlsm /p "workdir"
But this did not work either, and is not an option as we use both 2007 and 2010 at my workplace where this is intended to be used.
I can do it very easily by using absolute paths in the Excel auto-load, but as I have explained already this is just not an option.
Pls see below codes, the codes can record down changes made "from" and "to" and put on the "Log" sheet, however it is unable to capture the original values when I first open the file and make the changes.
Also, how can I put the value of "Now" in column B?
Code:
Dim PreviousValue
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Value PreviousValue Then
[Code].....
Is there a way to tell (using VBA in the workbook open event) whether a user has opened a particular file by double clicking on the file icon or by using the Open Command in Excel ?
View 9 Replies View Relatedmy wonderous spreadsheets have had a number of errors on them. One of them seems that the "autosave" VBA that we have been using seems to be hidden in memory. By this I mean that if I am working on this book and close it, on occassion the workbook tries to open itself again (it prompts for the password). Therefore I think something gets stuck "in memory" but I am not sure why it would act in this way?
The code is as follows:-
Public g_blnDate As Boolean
Public vartimer As Variant
Const TimeOut = 60 'in minutes
Sub Salva()
ActiveWorkbook.Save
Call Tempo
End Sub
Excel 2010, Win 7. I have attached a .xlsm file to an email. The contained macros run perfectly, and one of them is "public" so it shows up in "Developer - Macros", and "Customize Quick Access Toolbar" lists.
If the recipient clicks and drags the attachment to a folder, or copy/pastes the attachment, it works fine. (Macros are enabled, etc.)
However, if the recipient right clicks on the email attachment, and selects "SAVE AS" from the item list, the file saves, has the right name and extension, looks ok (the icon has the exclamation point, etc), and it is the correct size, but it simply will not load. You can double click, do a file open, etc. but it will not load. It's a hidden workbook, but if you "open it" and Alt-F11 to show the VBA editor, it isn't there!
It's not stopping the project - we simply tell them to click/drag, etc. but I totally do NOT understand why that happens.
I've just inherited a load of Excel files I need to continue using, but my predecessor has done something that disables the middle-click scroll ability.
I can still scroll up and down by turning the wheel, but I want to be able to click it and scroll in all directions at speed - I didn't realise how much I used this until I couldn't. Can't see anything in the VBA sheet properties, and they are all .xlsx files. Nothing leaps out of the settings either. If I create a new file or a file of mine within the same session, they work fine.
I've been playing about with this for ages, I have row 'U' which I manually link to local JPG files. Basically it has the word "HERE" and linked to a JPG that opens when you click it.
I'm really looking to just RIGHT CLICK a cell in column U, it opens a file browser, when I select the file it places HERE in the cell and links it to the file I've selected.
I was wondering if possible i could use an on_click method to open the find facility in excel. I know it may be easier to use the Edit, Find or Ctrl+F way.
But i have people using excel with no past experience what so ever, and i would like to make it as easy as possible....i.e a click of a button that says "Search".
Simple question: How can I disable the Research Task Pane from launching when I Alt-click in Excel 2003?
Further Explanation:
I have an Excel Add-in (commercial, not my own) that will retrieve data from an outside server when the user presses Alt-Double Click. Work's great. I've now upgraded to Excel 2003, so anytime I Alt-Double Click, Excel opens up the "Research Task Pane" (Pain?). To make matters worse, I'm behind a corporate firewall, so I get an authentication challange in order to connect to the internet when this opens. Don't want it, don't need it, want to get rid of it. Any solution is fine - Option setting, VBA, Registry setting
I have a need to open a file from my companies intranet. My current method was to open said file via the method that the recorder gave me. However, I would like ot be able to open a said file without having to start open another workbook.
This is the path:
[url]
So the command is this:
Workbooks.Open [url]
Links are not actual links
So what I need to know. Is how can I open this file without opening a workbook. I haven't been able to use the VB "Open Statement" to open a file and I don't believe that I've been successfull using the Filesystem object either.
So I have two dates:
Opening Date: 29/07/2014 13:27
Closing Date: 29/07/2014 14:42
These are formatted in DD/MM/YYYY and HH/MM
I need to subtract the dates and find the time taken from the opening and closing time.
I have two forms...clicking a specific button on the first form should display the second form which works fine.
VB:
Private Sub Image_Employees_Click()
Form_Main.Hide
Form_Employees.Show
[Code].....
When I do this twice, however, the second form seems to freeze/hang and I have to close Excel and then re-open it. I feel like I'm overlooking something obvious...