Code To Stop Scroll

Dec 25, 2008

is there anyway to stop screen scroll?

so that you can only see the visible cells at opening of workbook?

View 14 Replies


ADVERTISEMENT

Stop The Page To Scroll

May 28, 2009

I have a spreadsheet with about 300 rows and columns up to AB. Is it possible to stop the page to scroll beyond the 300 rows and AB columns.

View 8 Replies View Related

Scroll Top Left Code

Feb 13, 2009

I need some code to scroll the worksheet top-left.

View 2 Replies View Related

Mouse Wheel Scroll In A Combobox On Userform (Lots Of Code)

Sep 16, 2007

I have seen some code around that allows scrolling in listboxes using the mousewheel. I have also seen some code here on the forums about scrolling through a combobox embedded in a workbook. I have tried adapting both of these to suit a combobox on a userform but I cannot get either to work.

Here is the code that I used for the embedded combobox; I added it to the base code for the userform

I then added the following code to a standard module as stated in the forum post;

In the first section of the code there is a msgbox that never gets shown so I don't think code is recognizing the mouse wheel at all.

The second set of code that I used was set up to work with a listbox and it works perfectly with a listbox control. The problem is I cannot adapt it to suit a combobox and if I use a breakpoint to see what is happening Excel freezes.
The following code is added to the userforms code;

Then in a standard module I added the following code;

I added this section of the code;

I think this should only work on a Combobox but a Combobox does not appear to support the TopIndex value. Is there a way this can be setup to work with a userform combobox?
Sorry about the huge amount of code.

View 9 Replies View Related

Limit Scroll Area - Code Activates Only On Mouse Or Keyboard Input

Apr 21, 2007

I have a worksheet that serves as a navigation page for the workbook and use the following code to restrict from scrolling off the viewable content. The problem is that the code doesn't kick in until either a click if the mouse or keyboard input. This initially leaves the worksheet open for scrolling until input is received.

How do I make this code activate when the wb is loaded? Code in the Thisworkbook module already makes the menu the visible sheet, and code limiting the scroll area is in the sheet module.

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
With ActiveSheet
.ScrollArea = "A1:L11"
End With
Range("A1").Activate
End Sub

I've also tried using "Range("A1").Select", but it doesn't work either. How can I get this to work correctly?

View 2 Replies View Related

Restricted Scroll Areas Won't Scroll

Nov 26, 2007

I am using the toolbox/ properties method to restrict the scroll area in the sheets of my workbook. However, for some sheets when i keep the right hand arrow pressed, the screen will not scroll to the last column. (i.e. the screen display will not move with the selected cell box)

View 2 Replies View Related

Stop Code For ThisWorkbook

Nov 5, 2009

I use a code in ThisWorkbook to always open on sheet 1 when opening up the excel spreadsheet.Is there a code that I could put in to ThisWorkbook that would do a check that the workbook was e.g. "WorkbookA". If it wasn't then the start up code would be cancelled/ignored.The reason for this is that I am copying this workbook whenthe user has entered details in to it and so I do not want this code to run in the saved workbook, that will have a different name.

Workbook A is the master copy or template

View 7 Replies View Related

Code Stop After Sheet 180

May 6, 2008

I have the below code (pieced together and donated by other users on the forum)

Application.Calculation = xlCalculationManual
'
Application.DisplayAlerts = False
Application.ScreenUpdating = False
Dim Ctr As Long 'set ctr for Invoice
Dim wsData, wsInv As Worksheet
Dim Ibk, Rbk As Workbook

Set Ibk = Workbooks("Invoice.xls") 'Invoice as Ibk
Set wsInv = Workbooks("Invoice.xls").Sheets("Invoice")
Workbooks.Open Filename:="\cmc-dc01usersdcMy DocumentsProjectsRemake GoodyearRentCharge.xls"
Set Rbk = Workbooks("RentCharge.xls")
Set wsData = Workbooks("RentCharge.xls").Sheets("Sheet1")
With wsData........

View 10 Replies View Related

Stop Code When Value Reached

Oct 15, 2006

I have written a code but i can not make it stop where i want it to stop. I would like the code stop when cells(31,4).value reaches 0. Pls refer to attached sheet for a clear example.

The code is as follows


Sub production2()
If Cells(35, 4).Value > 0 Then
Cells(31, 4).Value = Cells(35, 4).Value
For j = 5 To 16
If Cells(36, j).Value < Cells(29, 4).Value Then If Cells(31, 4).Value > Cells(29, 4).Value Then Cells(37, j).Value = Cells(29, 4).Value
If Cells(36, j).Value < Cells(29, 4).Value Then Cells(37, j).Value = Cells(29, 4).Value
Cells(31, 4).Value = Cells(31, 4).Value - Cells(37, j).Value
Next j
End If
End Sub

View 9 Replies View Related

Loop Code Does Not Stop

Feb 24, 2007

I enter 1 record using the form, the next records does not populated correctly. It looks like the code just keeps looping by ....

View 3 Replies View Related

Stop Code After Certain Time

Jun 14, 2008

Trying to get my code to loop for one minute. Have tried this code (after searching through a few threads):

Sub LoopUsingTime()
x = 1
EndTime = Now + TimeValue("00:01:00")
For lCount = Now() To EndTime
Sheet1. Cells(x, 1) = "the time is now " & Now()
Sleep 5000
x = x + 1
Next lCount
MsgBox ("loop finished")
End Sub

View 2 Replies View Related

If Statement To Stop Dim Code From Running

Apr 29, 2014

Attached is an example of the program. The purpose of this program is to allow someone with very little knowledge about the information to enter data. The first tab labeled "Instructions" is will have two macros assigned to the buttons at the bottom of the page. The first macro labeled "Move Data" will move data will clear data in the shaded cell on the "Entry Form" sheet and fill those cells in with '----. The second macro labeled "Generate and Save" will save a master copy of the program, save a historical copy of the program by date, and print/save a pdf copy of the "Reports" sheet.

Each one of the historical (the last 8 sheets of the program) sheet receives data from the "Entry Form" and then moves the data by date into the table for archiving purposes.

If you look at the code for the "Entry Form". I have a couple of subs. The first being Worksheet_change. the first section of this code is to force certain cells to be uppercase. This part of the code is working fine. The second part of the code is the Dim MyValues. This part is working fine also, but...

My issue is... When I run the move data macro from the "Instructions" sheet the Dim MyValues reads these as changes to the cells and wants to push the data to the historical sheets.

What I would like is an IF Statement above the Dim MyValues part of this code that stops the Dim MyValue part of the code running if those values are blank, 0, or have '---- entered into them.

Test.xlsm

View 3 Replies View Related

VBA Code Won't Stop Users Using Spreadsheet After Certain Date?

Jul 28, 2014

The code that I'm using is supposedly not allow spreadsheet to be opened after a certain date, or does not allow a user to press any of the command buttons and comes up with a message saying the spreadsheet is closed for new entries.But is not working for me.

I placed the Code in the ThisWorkbook module.

[Code].....

View 8 Replies View Related

How To Stop Running The Code When Pressing Backspace

Jun 22, 2009

I have the following code to add dash mark to TextBox1 value depending on some condtions (mentioned in the code), the code works perfectly, but when we use Backspace Key to clear some charactors it is conflicting with the code running when changing Textbox1 value.

View 11 Replies View Related

Code To Stop Macro And Move On If No Value Found

Jul 2, 2013

I have created a few macros and once I was happy that they worked independently I joined them to run as one macro in several steps. I have just discovered a bug ...

The macro filters on a column and copies and pastes that range into another sheet.

HOwever, sometimes (as I have just discovered) when it filters, there will be no data against the value it is looking for.

I need to say, if no value, move to next step.

I.e. here's my code. It's looking for ASIA and it will copy and paste all rows with Asia to another page. It then does the same for EMEA. Thing is, in my example just now, there was no EMEA data and some times there may be no ASIA data so I need to build in some rules that if it does not find either of these it continues to finish macro or pops up and says 'NO ASIA found, CLick to continue' or something?

Selection.AutoFilter
ActiveSheet.Range("$A$12:AA" & lngLast).AutoFilter Field:=27, Criteria1:="ASIA"
Range("A13:Z" & lngLast).Select
Selection.SpecialCells(xlCellTypeVisible).Select
Selection.Copy
Sheets("ASIA DETAIL ").Select
Range("A19").Select

[code]...

View 1 Replies View Related

Code That Gets Stuck In The Loop And Will Not Stop Unless I Press The Esc Key

May 26, 2007

I have the following code that gets stuck in the Loop and will not stop unless I press the Esc key:

Sub WIP()
Dim ws1 As Worksheet, ws2 As Worksheet
Dim lastrow As Long
Dim newRow As Long
Set ws1 = Sheets("PAYCALC")
Set ws2 = Sheets("WIP")

Application.ScreenUpdating = False
With ws2
.Range("A2:C" & .Range("A2:C2").End(xlDown).Row).Clear
End With

x = 10
lastrow = ws1.Range("C5").End(xlUp)
Do
newRow = ws2.Cells(65536, 1).End(xlUp).Offset(1, 0).Row
ws2.Cells(newRow, 1) = ws1.Cells(x, 2).Offset(-2, 0).Value
ws2.Cells(newRow, 2) = ws1.Cells(x, 2).Value
ws2.Cells(newRow, 3) = ws1.Cells(x, 2).Offset(3, 0).Value
x = x + 21
Loop Until x >= lastrow

There's a twist to this. I have the same identiclecode in a different module. The only difference is ws2 is different and there are 7 newRow's. Other then that the two are the same.

That one works just fine without getting stuck. It will go through 200+ sets of records and stop when it reaches the last one.

The one above will not stop even though I just put in three records on ws1 for testing.

View 9 Replies View Related

Range- Code Stop When It Finds The First Match

Aug 22, 2008

Sub do_it()
Dim x As Range
Set x = Columns(4).F ind("*test*", lookat:=xlWhole)
If x Is Nothing Then GoTo 999
r = x.Row
Cells(r, 1) = Cells(r, 1) & " (W)"
999
End Sub

I need the above code to continue down column 4 and add the " (W)" to the entire column.
The code stop when it finds the first match.

View 9 Replies View Related

Stop Code Firing On Selection Change

Nov 22, 2006

how I can disable an InputBox? I've got some code that whenever someone selects a cell in a specified range, an input box pops up (running a macro) - this can get annoying sometimes though if just browsing. Does anyone know a macro where I can "disable" this?

View 4 Replies View Related

Stop Screensaver Activating While Code Running

Jul 10, 2007

I have a file that shows a rolling screen and updates information every 30 mins. I want to be able to stop the screensaver from activating while this file is open.

I have found this code on the forum that does this, how do I call this function from another module? ...

View 4 Replies View Related

Control Scroll Bars: Remove The Scroll Bars From Just One Worksheet But When Unticked

Jan 13, 2007

In the menu via TOOLS-->OPTIONS-->VIEW I am trying to remove the scroll bars from just one worksheet but when unticked, this option affects all of the worksheets in my workbook. Is there a way to just nail this selection down to one sheet via properties?

View 2 Replies View Related

Adapt VBA Code To Stop And Alert If Any Cells Are Blank?

Aug 1, 2014

I have a VBA code that when activated it copies 6 cells from sheet1 to the next available row in sheet2 - A2:F:2.

alerting and stopping the routine if any one of the cells in sheet1 are empty so the user has to input into all cells before the routine will execute.

does it need a check cells for content if error highlight empty cell.

View 7 Replies View Related

VBA Code To Stop Macro If Specific Text Is Found

Feb 24, 2012

I have a simple macro that copies data from worksheet to another. I only want this macro to be run once per day by the user. One of the cells that gets copied is the value found in the formula "=today()". My thought is that the macro could look for the existance of the current date in the pasted data (meaning the macro has already been run once today), and if the date = today, then a message pops up warning the user that the macro has already been run once today, and ask if they're sure they want to continue.

Any easy way to accomplish what I'm attempting to do? The current date gets pasted into a worksheet name "PriorDay" in cell C5.

View 2 Replies View Related

Code To Stop A User Adding Or Deleting Sheets

Aug 31, 2007

I need to stop users from adding and deleting sheets in a workbook

My idea was obviously to disable the command bars to add or delete sheets in open event and then put back in before close.

But then i thought...whats stopping them from right clicking the sheet tab and inserting a sheet, can i remove that menu to...?

I also wasnt sure if there were short cut keys to add or delete sheets.?

Some of my users use excel alot so i want to account for an tips they know that i might not.

View 9 Replies View Related

Code To Stop A Worksheet Selection Change Macro Running

Aug 17, 2009

I've got a worksheet_selectionchange macro on a sheet, and another macro that you can run after it. The issue is that when the second macro runs, it also runs the selectionchange macro, and wipes some of the info that the second macro should be copying.

Is there a piece of code that I can use in the second macro to block the selectionchance code from running until it's compelte?

View 6 Replies View Related

Form Or ActiveX Button To Stop / Start Code Temporarily?

May 12, 2014

I would like to know the easiest way to temporarily keep a worksheet code from running while I am editing, then turn it back on when I am done. I was thinking a button with these commands(?)>

Application.ScreenUpdating = False

Application.EnableEvents = True

but I don't know which button to use, or if I would need a button for each.

View 2 Replies View Related

Stop Macro: Button To Hit Or Better Just Some Keys To Hit To Stop It Without Using The Ctrl+alt+del Which Closes Everything

Dec 13, 2006

my excel sheet runs through a lot of calculations, opens Flowmaster, a simulations program, passes on data, receivs data and so on. Is there any way to have a user input to stop the whole simulation. During the first tries I had a lot of break point in my debugger. But now I want to have a button to hit or better just some keys to hit to stop it without using the ctrl+alt+del which closes everything.

View 4 Replies View Related

Scroll Box Dirrectly

Nov 19, 2009

I am trying to make a scroll box so I can enter data into the scroll box dirrectly. Such a simple thing.

View 11 Replies View Related

Can't Scroll Down On Excel

May 13, 2013

I'm trying to scroll down my work sheet but it's not letting me. Every time I move the scroll bar down the page it just keeps showing me the same part of the sheet eg cells 1-30 when I want to see all the way down to the bottom. I have some 20,000 lines I need to scroll through but I can't see all of them. To add to this, I keep having lines hide between other lines so theres a big gap like going from line 120 to line 4000 and I have to manually unhide them every time to see them.

View 2 Replies View Related

List Box Scroll Bar

Nov 14, 2008

Does anybody know how to force the scroll bar on a listbox to be at the bottom rather than the top when filled with data?

View 6 Replies View Related

Can't Scroll Back To Top

Dec 26, 2008

I have a spreadsheet with some scripting that automatically emails the report to whoever is on the sheet. I'm not sure what kind of scripting it is. I think my boss found it somewhere.

Whenever I scroll either down or up, the first 3 rows disappear and I'm not able to scroll back up. The scrollbar shows that I'm not at the top, but it won't let me go back up. The first 3 rows contain the button to send the email. If I close out without saving and open it again, its fine, until I scroll up or down.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved