how I can disable an InputBox? I've got some code that whenever someone selects a cell in a specified range, an input box pops up (running a macro) - this can get annoying sometimes though if just browsing. Does anyone know a macro where I can "disable" this?
View 4 RepliesI've set up code where when a cell within a specified range of cells is selected, a macro will run. This works all well and good except for when a whole row, column or range containing the defined cells is selected, there is a run time error. There is no situation where I want multiple cells selected to run the macro, so I only want to run the macro when only a single cell within that range is selected.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Intersect(Target, Range("GoToRange")) Is Nothing Then
Application.Run "'Macro Test Current MY PFEP Metrics.xls'!PFEP_Filter"
End If
If Not Intersect(Target, Range("GoToRange2")) Is Nothing Then
Application.Run "'Macro Test Current MY PFEP Metrics.xls'!PFEP_Filter"
End If
End Sub
The ranges defined are non-contigious ranges.
I want to be able to reset the value in a combobox, but without the combobox executing code, when it resets. Is there any way of doing this?
I have tried the code below but the ComboBox still executes when its value is changed.
Sub Reset_combobox()
Worksheets("Sheet1").ComboBox1.Enabled = False
Worksheets("Sheet1").ComboBox1.Value = 1
Worksheets("Sheet1").ComboBox1.Enabled = True
End Sub
The workbook containing the above is attached.
I've got a worksheet_selectionchange macro on a sheet, and another macro that you can run after it. The issue is that when the second macro runs, it also runs the selectionchange macro, and wipes some of the info that the second macro should be copying.
Is there a piece of code that I can use in the second macro to block the selectionchance code from running until it's compelte?
I ran this code last week and it worked great, but today it doesn't work at all. I have even deleted it, closed Excel and and started fresh. Is there some small thing I'm missing (like hopping on my left foot while entering a code) ...
View 7 Replies View RelatedI've several check boxes on a worksheet. Some of the check boxes control the values of other through the _click event. However, when I try to change the value the event attached to the control in questions fires.
application.enableevents = False
would prevent events being fire from within the macro but this only seems to work when I step through the code.
I understand that I could set a global variable to do this and will probably go down this route anyway - but I am interested to know how/when I should be using the EnableEvent method (as I am sure this should be the way that I use it)
I have a spreadsheet with a table of values in range E5 to T158.
A macro populates the table by looking up values on other sheets in the book. If the macro finds a value in the lookup for Row 7 of any column (ie E7,F7...T7) it populates the rest of the column with that value (E7 value gets pasted to E8:E158) THEN it protects the cells it pasted (E8:E158).
If the macro does NOT find a value for row 7, it simply skips it, leaving it blank, and continues to row 8 until it reaches row 158 of each column E to T.
I want to give the user flexibility with these values. So if the user either deletes E7 or changes the value of the contents in E7, I want to unprotect the cells of rows 8 to 158 for that column.
I have created a
Private Sub Worksheet_Change(ByVal Target As Range)
in the private module for that sheet below. I thought it was working but it isn't doing anything when I change or delete the value in Cell E7 for example. Please help!
Private Sub Worksheet_Change(ByVal Target As Range)
'Do nothing if more than one cell is changed
If Target.Cells.count > 1 Then Exit Sub 'Or IsEmpty(Target)
I have a "submit" button macro which user would click after he has finished his input. This macro would update a reference number on the worksheet named "orange" and then print out this worksheet.
My purpose is "orange" is printed out with a reference number.
Below is the 1st code.....
i try with what limited knowledge i have, if you dont mind take a look at the code below, i read your article and added the appropriate line, the code works fine except the msgbox has to be ok'd twice before it exits sub any ideas why?
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim rng As Range
Dim MyCell
Set rng = Range("A2:A100")
If Not Intersect(Target, rng) Is Nothing Then
With rng
For Each MyCell In rng
If MyCell = "" Then
MyCell.Select
MsgBox "Please use this next blank cell"
Exit Sub
End If
Next
End With
End If
End Sub
The code below will put "Some text" into column B when data is pasted into column D. This only works when copying data into one cell. If I copy into multiple cells of column D then the code does not run at all.
[Code] ......
Private Sub Worksheet_Change(ByVal Target As Range)
With Target.Cells(1, 1)
If Not Intersect(.Cells, Range("b3:b6")) Is Nothing Then
Range("b7") = "Not Found"
For i = 3 To 6: txt = txt & Cells(i, "b").Value & "_": Next
For Each r In Range("m3", Cells(3, Columns.Count).End(xlToLeft))
For i = 0 To 3: txt2 = txt2 & r.Offset(i).Value & "_": Next
If txt = txt2 Then
Range("b7").Value = r.Offset(4).Value
Exit For
End If
txt2 = ""
Next
ElseIf Not Intersect(.Cells, Range("b16:b19")) Is Nothing Then
Range("b20") = "Not Found".....................
I'm working with this code right now. The problem is the macro will only work if i type the numbers manually. if the values are retrieved from a combobox, the code above down not work as it cannot read the values.
When I paste data in Sheet2 in the attached CF Example2 file (Just by Selecting A1:L18 Cutting it and Pasting in the same place), the action of the VBA code in the Thisworkbook is correct but I am getting the 1004 Error Message from the VBA debugger saying "Run-time Error '1004': Application-defined or object-defined error
View 2 Replies View RelatedI have used the code for formatting: http://www.ozgrid.com/VBA/excel-cond...ting-limit.htm. This works fine when typing in the numbers manualy but if I have a formula (eg:A1=b1+c1) and a1 = 15 nothing happens. Is there an update button or a better way to do this?
View 2 Replies View RelatedI'd like to know if there is a change event that only occurs when a target cell is changed by the user, but does not occur when i'ts changed by a macro. nfortunately, the Worksheet_Change event occurs in both cases.
View 2 Replies View Relatedwhy this code does not work when the worksheet is changed between range "B1:F5"?
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("B1:F5")) Is Nothing Then
With Range("B1:F5")
Cells(Target.Row, 7) = Cells(Target.Row, 6).Value + Cells(Target.Row, 5).Value
End With
End If
End Sub
I seem to be lost in some macro-coding... I have this folder with pictures, and I want to display them as comments, by a macro. So far I have control. But then, if there is a picture that is missing, or if there is a cell that is empty in the selection, everything seems to stop.
the macro I use is very simple, but when everything is in place, its working:
Sub pics()
For i = 3 To 50
PicName = "C:UsersEspenPicturesHus" & Cells(i, 1) & ".jpg"
With Cells(i, 1).AddComment
.Shape.Fill.UserPicture PicName
.Shape.Height = 300
.Shape.Width = 400
End With
Next i
End Sub
Is it possible to make the macro run even if there are wholes, or if some pics are not store in the folder yet?
Is it possible to make the area "unlimited", as you see its now limited from 3 To 50.
And is it possible to make this run automatically, kind of checking the folder on its own to see if there is new pics?
If nothing is typed in and the OK button is pressed, it changes the entire sheet to values. I'd like the macro to stop if nothing is selected.
Dim sCol As String
sCol = InputBox("Select Column")
Set UserRange = Range(sCol & "9:" & sCol & "35")
UserRange.Value = UserRange.Value
Amongst the several sheets contained in my workbook, there is one called 'Inspection Report'. Users fill in whatever data is required in the other sheets, and once they get to this one, they are supposed to enter a number from 1 to 3 into Cell X1 (which is currently selected) before they select anything else. Unfortunately, I am currently unable to stop them from doing what they should not be doing.
So, I would like to have a notification of some sort pop up into their face if they click or move the selection anywhere else while Cell X1 is still empty. Something like a validation would be nice.
I'm using the following code in a worksheet:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
col = ActiveCell.Column
Range("output") = ActiveCell.Offset(0, -(col - 4)).Value
End Sub
In case it's not obvious, the macro places the value in the active row and 4th column of the worksheet into the range "output".
The problem is, the worksheet is large and somewhat slow to recalculate. This macro forces a recalc on any selection change, but i only need it to run when the row selection changes, not the column.
I'm sure there's a straightforward way to reprogram this.
Attached is book in which, when a choice is selected from Drop Down list in ColumnF the macro has to do the need.
When the macro was written it was working well. But when I tried to change it as a Worksheet_SelectionChange event nothing is happenning even though a choice is selected from drop down list.
I have a spreadsheet that holds the NHL schedule for the season. (See thumbnail)
In the picture I've highlighted the formula I use to determine how many games each team has over the next 7, 14, 21 and 28 days. What I've been doing is deleting the column for each day after that day has passed. (So tomorrow, I'll delete column K, and all the other days will move up one. Sunday will become column K)
My problem is that the formula =7-COUNTIF($K3:$Q3,"—") in cell G3 will read =7-COUNTIF($K3:$P3,"—") after I have deleted Saturday, and thus will only count 6 days worth. (The 14, 21 and 28 columns will only count 13, 20 and 27 as well.) Is there any way I can write this formula so that it stays as K3:Q3? Right now each day I modify the 4 formulas for the 1st team and then copy/paste then over the other 30, but this is rather tedious.
is there anyway to stop screen scroll?
so that you can only see the visible cells at opening of workbook?
I use a code in ThisWorkbook to always open on sheet 1 when opening up the excel spreadsheet.Is there a code that I could put in to ThisWorkbook that would do a check that the workbook was e.g. "WorkbookA". If it wasn't then the start up code would be cancelled/ignored.The reason for this is that I am copying this workbook whenthe user has entered details in to it and so I do not want this code to run in the saved workbook, that will have a different name.
Workbook A is the master copy or template
I have the below code (pieced together and donated by other users on the forum)
Application.Calculation = xlCalculationManual
'
Application.DisplayAlerts = False
Application.ScreenUpdating = False
Dim Ctr As Long 'set ctr for Invoice
Dim wsData, wsInv As Worksheet
Dim Ibk, Rbk As Workbook
Set Ibk = Workbooks("Invoice.xls") 'Invoice as Ibk
Set wsInv = Workbooks("Invoice.xls").Sheets("Invoice")
Workbooks.Open Filename:="\cmc-dc01usersdcMy DocumentsProjectsRemake GoodyearRentCharge.xls"
Set Rbk = Workbooks("RentCharge.xls")
Set wsData = Workbooks("RentCharge.xls").Sheets("Sheet1")
With wsData........
I have written a code but i can not make it stop where i want it to stop. I would like the code stop when cells(31,4).value reaches 0. Pls refer to attached sheet for a clear example.
The code is as follows
Sub production2()
If Cells(35, 4).Value > 0 Then
Cells(31, 4).Value = Cells(35, 4).Value
For j = 5 To 16
If Cells(36, j).Value < Cells(29, 4).Value Then If Cells(31, 4).Value > Cells(29, 4).Value Then Cells(37, j).Value = Cells(29, 4).Value
If Cells(36, j).Value < Cells(29, 4).Value Then Cells(37, j).Value = Cells(29, 4).Value
Cells(31, 4).Value = Cells(31, 4).Value - Cells(37, j).Value
Next j
End If
End Sub
I enter 1 record using the form, the next records does not populated correctly. It looks like the code just keeps looping by ....
Trying to get my code to loop for one minute. Have tried this code (after searching through a few threads):
Sub LoopUsingTime()
x = 1
EndTime = Now + TimeValue("00:01:00")
For lCount = Now() To EndTime
Sheet1. Cells(x, 1) = "the time is now " & Now()
Sleep 5000
x = x + 1
Next lCount
MsgBox ("loop finished")
End Sub
Attached is an example of the program. The purpose of this program is to allow someone with very little knowledge about the information to enter data. The first tab labeled "Instructions" is will have two macros assigned to the buttons at the bottom of the page. The first macro labeled "Move Data" will move data will clear data in the shaded cell on the "Entry Form" sheet and fill those cells in with '----. The second macro labeled "Generate and Save" will save a master copy of the program, save a historical copy of the program by date, and print/save a pdf copy of the "Reports" sheet.
Each one of the historical (the last 8 sheets of the program) sheet receives data from the "Entry Form" and then moves the data by date into the table for archiving purposes.
If you look at the code for the "Entry Form". I have a couple of subs. The first being Worksheet_change. the first section of this code is to force certain cells to be uppercase. This part of the code is working fine. The second part of the code is the Dim MyValues. This part is working fine also, but...
My issue is... When I run the move data macro from the "Instructions" sheet the Dim MyValues reads these as changes to the cells and wants to push the data to the historical sheets.
What I would like is an IF Statement above the Dim MyValues part of this code that stops the Dim MyValue part of the code running if those values are blank, 0, or have '---- entered into them.
Test.xlsm
The code that I'm using is supposedly not allow spreadsheet to be opened after a certain date, or does not allow a user to press any of the command buttons and comes up with a message saying the spreadsheet is closed for new entries.But is not working for me.
I placed the Code in the ThisWorkbook module.
[Code].....
I have the following code to add dash mark to TextBox1 value depending on some condtions (mentioned in the code), the code works perfectly, but when we use Backspace Key to clear some charactors it is conflicting with the code running when changing Textbox1 value.
View 11 Replies View Related