Color Offset Of Named Range
Dec 2, 2007
I've created a named range "Row_16" H16:M16. I've made a macro which colors the interior of this range..
Sub Fill_Row16()
Range("Row_16").Select
With Selection.Interior
.ColorIndex = 48
.Pattern = xlSolid
.PatternColorIndex = xlAutomatic
End With
End Sub
I would also like to add a secondary color (Red) to the row just below this range ie H17:M17. Is there a way to offset/ select an entire range.?
View 2 Replies
ADVERTISEMENT
Jul 23, 2014
I know how to create a dynamic named range so that no blanks appear in my data validation list but have only ever done this for a list in a column, i.e...
-----A-----
1--Apple
2--Orange
3--Pear
4--Bannana
5--
6--
A1:A6 would be named Fruit, then name manager, edit: =OFFSET($A$1,0,0,COUNT($A1:$A6),1)
The Data Validation list then shows Apple, Orange, Pear, Bannana. And if I add Peach into A5 later, that then appears in the list.
What I need though is to edit this as if the named range 'Fruit' covers cells A1:F1.
------A---------B-------C--------D-----------E-----------F
1--Apple---Orange---Pear---Bannana---
2--
View 7 Replies
View Related
Nov 12, 2011
I have data coming into my sheet from an Access file into columns b:l which automatically get covered by a named range which changes according to the size of the data coming in.
What I'd like to create is a named range which includes this original range as well as columns a and m:p. Is this possible using Offset at all?
On top of this my data from Access comes into row 2 and I'd like the named range to cover row 1 too.
View 3 Replies
View Related
Mar 7, 2014
I have a problem with an offset match function. What I want to do is look at the value in cell C3 and then match it to a location in a named range and then return the value 8 rows above. The problem is the named range contains non contiguous cells i.e. D10:AE10, D22:AE22, D34:AE34. So if the value appeared in the area D10:AE10 it would return the value in the matching column row 2. How to do this I have tried lots of combinations but they just come out #N/A.
View 3 Replies
View Related
Jul 24, 2009
I have used Offset() for creating dynamic Named Ranges in Excel 2003. I'm a little disturbed that this usage is no longer supported in Excel 2007? Has anyone else seen this breakdown? What alternatives are available.
In my brief investigation, it looks like opening the .xls in compatibility mode allows the usage to work. However, saving the workbook as a .xlsm (since I also have macros in it) causes any usage of the named range containing Offset() to return an error (both VBA and sheet functions).
View 9 Replies
View Related
Oct 15, 2009
When I make a dynamic named range, I typically do something like:
=offset($A$1,,,counta(A:A),counta(1:1))
I remember awhile ago I saw (within some of the comments on Jon Peltier's site, I believe) a way to make a dynamic named range without using offset. Does anyone know how to do it?
View 9 Replies
View Related
Jul 14, 2012
I have as the two logical operators for an IF function the following COUNTA calculation which checks how many blanks are in the range GrdMtx7 and subtracts this from the value in E5 and adds the suffix "Module(s)".
Code:
(E5-COUNTA(GrdMtx7)-1)&" Module(s)",(E5-COUNTA(GrdMtx7)&" Module(s)")))
GrdMtx7 is a non-contiguous range consisting of the following cell references on a second sheet:
Code:
='Mod Schedule'!$E$7,'Mod Schedule'!$H$7,'Mod Schedule'!$K$7,'Mod Schedule'!$N$7,'Mod Schedule'!$Q$7,'Mod Schedule'!$T$7,'Mod Schedule'!$W$7,'Mod Schedule'!$Z$7,'Mod Schedule'!$AC$7,'Mod Schedule'!$AC$7,'Mod Schedule'!$AF$7,'Mod Schedule'!$AI$7,'Mod Schedule'!$AL$7,'Mod Schedule'!$AO$7,'Mod Schedule'!$AR$7,'Mod Schedule'!$AU$7,'Mod Schedule'!$AX$7
I need for the formula of the IF function to copy down so that it refers to F5, G5, H5, I5...etc.
I also need for the non-contiguous named range GrdMtx7 to refer to the same non-contiguous range shifted down one row intact for the COUNTA function to operate on the next row down, such that COUNTA is checking for blanks in the range:
Code:
='Mod Schedule'!$E$8,'Mod Schedule'!$H$8,'Mod Schedule'!$K$8,'Mod Schedule'!$N$8,'Mod Schedule'!$Q$8,'Mod Schedule'!$T$8,'Mod Schedule'!$W$8,'Mod Schedule'!$Z$8,'Mod Schedule'!$AC$8,'Mod Schedule'!$AC$8,'Mod Schedule'!$AF$8,'Mod Schedule'!$AI$8,'Mod Schedule'!$AL$8,'Mod Schedule'!$AO$8,'Mod Schedule'!$AR$8,'Mod Schedule'!$AU$8,'Mod Schedule'!$AX$8
I can't get got to work at all using OFFSET and would rather not create dozens or hundreds of named ranges incrementing one at a time - is there a way to achieve this, preferably with a formula, but vba if absolutely necessary.
My best effort doesn't work:
Code:
(E6-COUNTA(OFFSET(GrdMtx7,1,))-1)&" Module(s)",(E6-COUNTA(OFFSET(GrdMtx7,1,)))&" Module(s)")
View 2 Replies
View Related
Jul 31, 2012
I keep losing my named ranges when attempting to reopen a particular file I am working on. I get the "excel found unreadable content....." error message and then when it corrects, the range names are all gone. is it efficient to create the named ranges at open? Otherwise how should it be done so that my workbook will definitely have these names each time its used?
View 3 Replies
View Related
Oct 19, 2007
I am a novice excel and VBA user, but have been working the past few days on a project to create a data entry form (using Excel 2003 on WinXP). I have the userform created and the textboxes working fine for inputting data into the spreadsheet. I also have comboboxes set up, and if I directly input data into them, they also input that data. So far, so good.
(problem)
Here is my issue: I want the comboboxes to use dynamic / variable ranges, so I have been trying to set up the ranges by defining them as names. I've come across a bunch of examples, but none of them seem to work (all produce an error that the formula is not correct or instead seem to reset the name to just the first cell when I input it).
My sheet is called Dropdown Lists, and there is a column here for each combobox. Each row in a column has the options I'd like used for that combobox. So I am basically trying to name a range as the entries in just one column.
This is what I have been working with most recently in the Name - > Define dialog box that according to everything I read -SHOULD- be working:
=OFFSET('Dropdown Lists'!$A$3,0,0,COUNTA('Dropdown Lists'!$A:$A),1)
This produces an error, that when you hit OK highlights "$A$3" - and if I remove the $ symbols, it skips then to the "$A:$A" until I remove THOSE $ symbols, and then excel will accept it, but when I go to the name, it only highlights one cell. I thought maybe that was OK, but when I tried putting the name into my rowsource, nothing happened - so apparently not.
Questions:
(main question)
- Why will this not input correctly when everything I read suggests this format? Am I not handling the space in the worksheet name correctly (with ' ')? Sometimes excel will automatically add in " " between = and OFFSET and the closing at the end, but this also has not helped. One source I read even recommended taking off the = at the start (also did not help). Am I missing something here?
(follow-up questions)
- Why are you supposed to use "$" before the cell references anyway? I've looked for an answer but haven't found one yet... is that for when you make cell references to cells on an external worksheet?
- What is the "Add" button for on the Name -> Define dialog box? I'm confused to if I am supposed to use this to add the name to the list of defined names, or just hit OK?
- At the bottom of the Name -> Define dialog box is the "Refers To:" field with the formula. On the right of that you can hit a button to go to what seems like another (smaller) formula input box. Why would I ever use that when I could just type it in on the previous box? There is no label for it so I am guessing here - but does it actually do something else (like you need to go to that smaller dialog to input new formulas and the previous box is only for -viewing- formulas, or?)?
View 9 Replies
View Related
Aug 16, 2014
Let's say you have a named range, Rng1, which consists of cells A1 & A2. In vba how would you report back what, if any, named range the following cells resides:
Code] .....
here are multiple named ranges so using intersect is not feasible. Essentially, through code, I will be given a range and I need to determine if that range if part of a named range.
View 5 Replies
View Related
Dec 25, 2008
I use the standard OFFSET-COUNT-MATCH method to create dynamic named ranges in my Excel projects. Needless to say, this method won't work on a spreadsheet with formulas extending beyond the current range. The count function counts the cells containing formulas, even though they may contain no data. Does anyone know how to construct a formula that will IGNORE the "formula only" cells??
View 3 Replies
View Related
Jun 2, 2006
I need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
View 2 Replies
View Related
Jul 9, 2014
I am trying to color a cell with a macro. I am using
ActiveCell.Offset(a,b).Value= a number then a want to change the color of the cell to yellow. When I tried to code this, my Active cell's color is changed, but not the offset cell.
How do I change the color in an "offset cell".
View 5 Replies
View Related
Jul 19, 2013
I'm trying to make my named ranges remember the values of the last active cells used within another named range. The purpose of this is to make my charts dynamically change dependant on two criteria selected. My spreadsheet currently updates itself as and when I change the active cell within a single named range, dynamically changing the chart data by using Lookup based on the active cells value. However I want to get away from having several charts showing, I would like to have a single chart which dynamically changes based on a second selection. So the first selection is for a department (Facility) which changes the chart data relevant to that department, the second selection is to dynamically change the chart shown for the pre selected department.
Picture2.jpg
Using the following code when updating just one criteria with several charts
VB:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Application.Intersect(ActiveCell, [MeasureType]) Is Nothing Then
[valMeasurePicked] = ActiveCell.Value [code].....
which works fine but I'm not sure how to add a second selection criteria because my code uses Activecell. I thought that the VBA needed to set the last used value of a range as a variable and therefore allow the second criteria to be selected but am not sure how to put it into practice.
View 2 Replies
View Related
Dec 8, 2006
I am aware of the ColorIndex, but more specifically I need to change the fill color of a cell that is 9 columns to the right of the active cell. I can't find out how to make this work. to clarify:
ActiveCell + 9 columns.Interior.ColorIndex = Yellow
There has got to be an easy way to do this.
View 3 Replies
View Related
Oct 25, 2009
if I can use a named criteria as well as a named range. In essence what I am looking to do is count certain cells that meet the criteria in a certain named named range,
View 9 Replies
View Related
Mar 14, 2013
Merge two columns into one list in excel
I would like to combine List1 and List2 into a 3rd named range called List3. I was wondering if this were possible without using any additional cells/columns (i.e. I don't want to use Column C like in the example shown in the link above).
Here's the formula from the example:
Code:
=IFERROR(INDEX(List1,ROWS(C1:$C$1)),IFERROR(INDEX(List2,ROWS(C1:$C$1)-ROWS(List1)),""))
I've played around with it, but could not come with any that worked.
View 3 Replies
View Related
Feb 15, 2010
I'm trying to make a simple chart with VBA based on a row with values that will color the offset cell interior red and also give it a value of 1. (look a the example sheet.)
View 4 Replies
View Related
Nov 1, 2009
This is probably elementary, but I'm struggling and would appreciate any help as I have very little excel VBA experience to draw from.
I have assembled code which changes the cell color based on a value change in Column A. Column A will contain many different groups of repeating values. This code works well and and I have been able to figure out how to limit the number of colors to only 2. The end result is each set of similar values in column A is visually grouped by one of two alternating colors.
The number rows in the data set is variable as the data set is extracted from SAP. The number of columns is fixed.
What I want to do now is set the cell color in columns B through F the same color that was assigned to the row in column A. So if cell A3 is set to colorindex = 6, then I want to set the range of cells B3 to E3 to the same color.
Here is the code I am using to set the color of the cells in Column A:
View 7 Replies
View Related
Sep 4, 2007
I have read post re this question but have not been able to answer my problem. I get the error message 'Application defined or object defined error' when running the code below. I should indicate the range counter currently indicated about 6,200 rows that this code will work on and the individual range names in the list of 6,200 rows are spread over at least 20 worksheets.
The code appears to be running but after some time it stops on the line of code 'Range(Cells(i, 1).Value) = Cells(i, 2)'.
Sub PopulateWithImportData()
Dim counter As Integer
counter = Sheets("Imported Data").Range("Counter")
Application. ScreenUpdating = False
Application.Calculation = xlCalculationManual
Worksheets("imported data").Select
Range("a1").Select
i = 1
Do Until i = counter
Range(Cells(i, 1).Value) = Cells(i, 2)
i = i + 1
Loop
View 8 Replies
View Related
Aug 6, 2013
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
View 9 Replies
View Related
Apr 3, 2008
Im sorting a dynamic range as mentioned in this Sorting a Named Range. My range is called drWarningTypes and is defined as:
=OFFSET(DataSource!$A$2,0,0, COUNTA(DataSource!$A:$A)-1,1)
When there is only one cell in the range, then running the following sort function includes A1 also in the search (and also adjoining columns).....
View 9 Replies
View Related
Apr 10, 2013
I am trying to calculate some averages. What I have is 3 columns of data in A, B, C, also the "tasks" in A are in named ranges ex: "Award Contract" is a named range - "Task_Award" and "Confirm Updates" is a named range - "Task_Updates". I've attached a sample excel sheet.
I'd like to be able to create a macro to evaluate column A, and for every row in range "Task_Award", give me the average of the corresponding cells in column C and put it in the same range of cells in column B , then, for every row in "Task_Confirm" then give me the average of the same range of cells in column C and place the result in the same range of cells in column B. This is my very first post so I hope I am doing this correctly. I have 77 of these task ranges to evaluate and it will take a long time to do it manually. I'm thinking of a loop function.
View 1 Replies
View Related
Jul 15, 2014
I have a column of data that keeps getting new information in it. what i need is a named range that i can use for a chart, first point in the named range will be the first value in the column, second point will be avg. of point 1 and 2, then 3rd point will be avg. of 1,2,3 etc.
View 1 Replies
View Related
Aug 10, 2008
I have a named range that expands and contracts based upon the amount of data that is in some column. Call it AllData_UsedRange.
I have another named range that actually refers to a range. Call it AllData.
Column A
Row2 56
Row3 44
Row4 65
AllData is a named range that refers to the range A2:A65536
AllData_UsedRange refers to A2:A4 by way of this formula.
=OFFSET(AllData,0,0,COUNTA(AllData))
How to I obtain an address of AllData_UsedRange in VBA code?
These do not work...
ThisWorkbook.Names("AllData_UsedRange").RefersToRange.Address
Evaluate(ThisWorkbook.Names("AllData_UsedRange"))
View 9 Replies
View Related
Sep 8, 2006
I am trying to create a graph for a range of data that updates monthly (adding an extra month each time). I wanted the graph source data to update automatically each time the data is refreshed so used an OFFSET formula to identify a named range. I then point the graph to the named range as the source data.
When I enter the range as the source data the graph picks it up. However, when I re-enter the source data option on the graph it has converted the named range into a cell written range (ie. replaces "=QUALITY" with "='Front page'!$B$7:$J$10" - which therefore will not update when the range increases.
View 4 Replies
View Related
May 16, 2009
I am having trouble with one line of this code that I can't figure out how to write correctly. I have set the range, but I need to offset by 10 rows up. My code fails at set rng.
View 6 Replies
View Related
Sep 29, 2009
I have an offset range ("TheCell") that does not seem be working how I would expect.
I don't know if its because the sheet I am working on was originaly German but I would be surprised if that was the case.
I Use sheet change to set the peramiters of the range and to test the value
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim rowcell
Dim colcell
Dim typeit
colcell = ActiveCell.Column
rowcell = ActiveCell.Row
ActiveWorkbook.Names.Add Name:="iname", RefersToR1C1:="=" & "Tabelle2!R1C" & colcell
ActiveWorkbook.Names.Add Name:="Jname", RefersToR1C1:="=" & "Tabelle2!R" & rowcell & "C2"
typeit = Range("TheCell").Value
MsgBox typeit
End Sub
=OFFSET(Tabelle1!$B$4,MATCH(Jname,Tabelle1!$B$5:$B$57,0),MATCH(iname,Tabelle1!$B$4:$EX$4,0)-1)
but for some reason I am getting a runtime error 1004 worksheet failed.
I have used this technique before and its been fine so what mistake have I made :o)
View 9 Replies
View Related
Aug 24, 2006
I want to apply some logic to a range. However I want to offset the bottom of the range by 1 row.
Example: I have a range (B8:I19) already defined in my vba code. But I want to shade range (B8:I20).
MyRange = Range("B8:B19")
MyRange.Offset(1, 0).Interior.ColorIndex=3
This code also offsets the top of the range (row 9), which I don't want.
How can I only offest the bottom of the range?
View 5 Replies
View Related
Aug 25, 2006
I know that I can return the value of a defined name range, the address, and even the value of the define name, but if you are given a range address, how do you find its corresponding defined name in code?
View 4 Replies
View Related
