Find Matched Value In A Range For Named Cell Then Copy Range Cells Below

Aug 6, 2013

I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.

The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.

View 9 Replies


ADVERTISEMENT

Copy/Paste Cell To Named Range Named In Adjacent Cell

Sep 4, 2007

I have read post re this question but have not been able to answer my problem. I get the error message 'Application defined or object defined error' when running the code below. I should indicate the range counter currently indicated about 6,200 rows that this code will work on and the individual range names in the list of 6,200 rows are spread over at least 20 worksheets.

The code appears to be running but after some time it stops on the line of code 'Range(Cells(i, 1).Value) = Cells(i, 2)'.

Sub PopulateWithImportData()
Dim counter As Integer
counter = Sheets("Imported Data").Range("Counter")

Application. ScreenUpdating = False
Application.Calculation = xlCalculationManual
Worksheets("imported data").Select
Range("a1").Select

i = 1
Do Until i = counter
Range(Cells(i, 1).Value) = Cells(i, 2)
i = i + 1
Loop

View 8 Replies View Related

Determining If Cell Is Part Of Named Range And What That Named Range Is?

Aug 16, 2014

Let's say you have a named range, Rng1, which consists of cells A1 & A2. In vba how would you report back what, if any, named range the following cells resides:

Code] .....

here are multiple named ranges so using intersect is not feasible. Essentially, through code, I will be given a range and I need to determine if that range if part of a named range.

View 5 Replies View Related

Dynamic Named Range Sort Including Cells Outside Defined Range

Apr 3, 2008

Im sorting a dynamic range as mentioned in this Sorting a Named Range. My range is called drWarningTypes and is defined as:

=OFFSET(DataSource!$A$2,0,0, COUNTA(DataSource!$A:$A)-1,1)

When there is only one cell in the range, then running the following sort function includes A1 also in the search (and also adjoining columns).....

View 9 Replies View Related

VBA To Get Average Of Range Of Cells Based On Named Range In Different Column

Apr 10, 2013

I am trying to calculate some averages. What I have is 3 columns of data in A, B, C, also the "tasks" in A are in named ranges ex: "Award Contract" is a named range - "Task_Award" and "Confirm Updates" is a named range - "Task_Updates". I've attached a sample excel sheet.

I'd like to be able to create a macro to evaluate column A, and for every row in range "Task_Award", give me the average of the corresponding cells in column C and put it in the same range of cells in column B , then, for every row in "Task_Confirm" then give me the average of the same range of cells in column C and place the result in the same range of cells in column B. This is my very first post so I hope I am doing this correctly. I have 77 of these task ranges to evaluate and it will take a long time to do it manually. I'm thinking of a loop function.

View 1 Replies View Related

Dynamic Named Range :: Does Not Copy The Formula That References A Cell From Another Line

May 29, 2007

I am having a few problems with dynamic named range in excel 2000.

When adding new data to the range, excel extends the range correctly, but only copies some of the formula correctly. It does not copy the formula that references a cell from another line.

I am trying to create a excel spreadsheet and have a formula =e10-e9, which does not copy down.

View 10 Replies View Related

Open Workbook Where Named Cell Contain Name & Path, Copy Range And Paste Values

May 19, 2009

I am successfully opening a .csv file using a variable value stored in a named range in my Main file (the variable includes the directory and path).
I copy data from the .csv file to the Main file then I need to close the .csv file without saving but I want to do that by using the

Windows("xxxx").Activate

command where "xxxx" is the namedrange in my Main file which stores the .csv filename (without the directory and path prefix).

I can use the

ActiveWindow.ActivatePrevious

command but if I have another workbook open, this one closes instead of the .csv file I opened from the macro.

I realise this is probably very basic and I've searched the forums but can't find any identical postings.

View 5 Replies View Related

Compare Column A In Two Worksheet If Matched Then Copy To Matched Sheet?

Aug 4, 2014

I need to compare column A of Original.test worksheet to column A of Supplier.test worksheet. If there is a match then copy entire row of the corresponding match from Original.test to Matched worksheet. If no match then copy that row into OnlyInOriginal worksheet.

I have included the workbook and what the output should be. Hope it makes sense. ozgrid.xlsx

View 5 Replies View Related

Match Named Range To Range/Cell Address

Aug 25, 2006

I know that I can return the value of a defined name range, the address, and even the value of the define name, but if you are given a range address, how do you find its corresponding defined name in code?

View 4 Replies View Related

Find Value Using Named Range

Jan 17, 2012

I am looking to create some vba to find a value in a separate workbook using a named range in my main workbook.

View 8 Replies View Related

Find Range With Value X And Copy To A Cell

Feb 13, 2007

I have small problem to solve and I can't find out how: I have to find cells in a range (L4:L20) with value PM and copy range with two next cells to cell F4 (not a cell with "PM") If in range("L4:L20") cells = PM then copy range with next 2 cells to ("F4"). See attached worksheet.

View 3 Replies View Related

How To Find Dimensions Of Named Range

Apr 12, 2013

I'm a bit uncertain if my named range has turned out the way i want it to.. Is their anyway of finding the dimensions of my namned range, i.e. # of rows and columns?

View 8 Replies View Related

Find String In Named Range

Dec 23, 2011

I have a text string "Area" which relates to an entry in a named range "AreaCodes", which is stored on a non-active sheet. How can I activate the cell contaning the string other than using this, recorded, code

Code:
Sheets("Sheet3").Select
Range("A1").Select
Cells.Find(What:=Area, After:=ActiveCell, LookIn:=xlFormulas, LookAt:= _
xlWhole, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _
, SearchFormat:=False).Activate

View 9 Replies View Related

Find Beginning And End Of Named Range

Oct 31, 2008

In VBA, does anyone know how I can find the beginning and end of a named range?

eg: Range "CellsToTotal" is A1:A10, if I know only the name of the range, can I retrieve both A1 and A10 values?

What I have done is named a range on the fly as so (where vStartCellCoordinates and vEndCellCoordinates are both variables holding 2 ints):

ActiveWorkbook.Names.Add Name:="CellsToTotal", RefersTo:="=" & Cells(vStartCellCoordinates(1), vEndCellCoordinates(2)).Address
What i'd like to do is then set a third arbitrary cell to sum up the range as a formula (note the following is a wierd adapted pseudocode thing):

Cells(iRow, iCol).Value = "=sum(" & start(Range("CellsToTotal").Address(0, 0) & ":" & end(Range("CellsToTotal").Address(0, 0) & ")"
How can I make this work?

View 9 Replies View Related

Dynamic Range Used Named Cell Range

Jul 7, 2014

Line of code that will Select a Named Range in this case I have Named a CELL "DataSummary" Need to use that named range by selecting 30 columns and 54 rows.

Range("DataSummary),(??,??) doesn't work.

View 1 Replies View Related

Match And Index To Find A Value Within A Named Range

Nov 12, 2008

Is it possible to use Match to find a value within a Named range and then, based on that value, use Match and Index again to find a value two columns across?

I have a list of clients in Column A, with 10 cells between each. In Column B, I have a list of currencies (the same currencies next to each client) and in Column C the rate this client pays for this currency. I want to reference these rates from an external workbook. Is there any way to use Match to locate the client name, then use Index/Match to locate the rate for a particular currency, somehow telling Excel where to look the second time?

View 10 Replies View Related

Find If Named Range Exists In Sheet Using VBA

Nov 17, 2011

How can i find if a named range exists in a sheet using VBA?

E.g.: I have a named range called test that houses 4 numbers in four cells. Using

Code:
Dim rtest As Range
Set rtest = Worksheets("sheet1").Range("test")
.
.
.
.
rFoundCell = _
Cells.Find(What:=rtest, After:=Range("a1"), LookIn:=xlValues, LookAt:=xlWhole, SearchOrder:= _
xlByRows, SearchDirection:=xlNext, MatchCase:=False)

Won't work. Run - time error 91 occurs.

View 9 Replies View Related

Find First Empty Cell In Range And Copy Data

Jan 28, 2007

I am looking for a formula function or a vba code where:

- In workbook1 find the first cell that is empty between range A7 -
A10,
- In workbook2, in Range G10- G13: find the word "Day1".
- If the word "Day1" exists in cells G10 or G11 or G12 or G13, copy
the particular cell or cells where "Day1" exists to the first found
empty cell or cells in range A7-A10 in workbook1.


Lets suppose cells A8, A9, A10(workbook1) are empty cells, that means
A8 is the first empty cell.
And G10,G11,G12, G13 (workbook2) have the word "Day1"
Then,
Copy cell G10 into cell A8
Copy cell G11 into cell A9
Copy cell G12 into cell A10

View 3 Replies View Related

Find Dates Between Monthly Range And Sum Another Cells Results That Are In A Range

Oct 10, 2009

I'm trying to make a by month spreadsheet that has all twelve month ranges starting in for a3. in a3 it would have the start date and in a4 it would have the end date. I'm trying to locate all of the dates between those two dates and pull in the profit ammounts from another sheet, the results would be in row 5. I would also like to pull in the loss amounts and have them in row 6. All corresponding with the date range in rows 3 and 4.

View 9 Replies View Related

Return Row Range Of Matched Value

Aug 14, 2008

I am having trouble using vlookup and offset to arrive at a solution. I have a row a 5 formula based items. For example:

C 1 2 3 4
1 C 2 3 4
1 2 C 3 4
1 2 3 C 4
1 2 3 4 C

I have been using the match function to find the location of C, but I want to output the items in the same row as C, in the order they appear if C was removed.

View 3 Replies View Related

Copy Named Range From Another Workbook

Dec 27, 2009

In my project I have two workbooks. I am working on getting one to pull data from another depending on which employee is selected from a drop down list.

TestLOG.xls contains a worksheet for each employee, with named sections within for various training the employee has, and down each row has information on the date this was received, initial, recurrent, etc. It is only this single worksheet for each employee that any data entry occurs, which makes things a lot more organized and efficient.
TestFORMS.xls is the workbook accessed by the records department which has different worksheets depending on what data is to be presented. When an employees name is selected, I need the form to pull the specific data from another workbook, and post it on the current worksheet. This get repeated a couple times to fill the adjacent columns of data. I can't just select the whole table from the other workbook because in this current worksheet for example, only specific columns are pulled from the other workbook.

To better explain the flow...
Current workbook is TestFORMS.xls
Current sheet is Test
Closed workbook is TestLOG.xls

In TestFORMS, sheet Test, when named cell Employee is selected with a value...
Then open TestLOG in the background and open sheet of same name as Employee, and cope range ACtype.
Back in TestFORMS, sheet Test, paste the ACtype data in the range named Type.

Private Sub Worksheet_Change(ByVal Target As Range)
Dim Ename As String
Ename = Range("Employee").Value
If IsEmpty(Ename) Then Exit Sub
Workbooks("TestLOG.xls").Sheets(Ename).Range("ACtype").Select
Selection.Copy
Workbooks("TestFORMS.xls").Sheets("Test").Activate
Range("Type").PasteSpecial Paste:=xlPasteValues
End Sub


Within the same sub, I would add additional lines of code to copy and paste the other ranges needed on the current worksheet.
My current hangup is that I get an error at Range("ACtype") as that is not the proper way to call the range.
There's more work to be done with the macro yet, like having it pull the data with TestLOG closed, which I believe is done by listing the path to filename.
Then I need to maintain cell formatting on the new table when the data is posted to it.
Hopefully the final task is to get this working so that when a new employee is selected in TestFORMS, the previous employees data is cut and the new posted, as the worksheet is just printed out for each employee and put on hardfile.

View 9 Replies View Related

Copy Named Range Code

Sep 5, 2007

I am using Andy's scrolling chart, and it is working well. http://www.andypope.info/charts/Scrolling.htm. Is there a way to paste the data the chart is displaying into a new sheet? In VB I tried to copy the named range and paste it but it did not work.

View 2 Replies View Related

Find Row Of Large Value In Array And Return Values In Different Named Range

Feb 28, 2012

I have four named ranges (Segment, Keyword, Impressions and Dropdown) and I would like to create a formula-based ranking of keywords by impressions and clicks. Using the following array formula, I am able to return the correct values for impressions or clicks:

{=LARGE(IF(Segment=DropDown,Impressions),$H7)} where $H7 is the number ranking 1, 2, 3 etc.

My question is what array formula could be used to find which row in the array returned that number and then pulls the data from the same row in the other named ranges?

Essentially find row of {=LARGE(IF(Segment=DropDown,Impressions),$H7)} but return Keyword and Clicks on that row.

Other Notes: I cannot use pivot tables and some values might be the same which would make Vlookups not accurate for duplicate values.

Link to an example document to clarify this. [URL] .......

View 9 Replies View Related

Excel 2010 :: Find A Cell Within Range Then Copy That Cell To Another Location

Sep 26, 2013

(I am using Excel version 14.0.7106 and MS Office Professional 2010.)

I have a macro in which I have named a range of numbers in a spreadsheet, used the "find" function to find a particular number in that range, and now would like to copy some information into a cell in the same row as the found number. However, when I try to move over to the cell that I'm copying to, it only goes to the 1st row in the range that I have defined.

Here's the portion of code I think you need to see. Everything works...it finds a match...but then I don't know what to do from there to get the information to the correct row:

'Grab the 1st project number
Range("C8").Select
Do Until ActiveCell.Value = ""
If ActiveCell.Value "" Then
prjnum = ActiveCell.Value
Selection.Offset(0, 8).Select

[Code] ..............

View 7 Replies View Related

Find Empty Cell In Range Then Copy Info In Cell Above It?

Dec 15, 2011

I've got a range of data in Column D approx 50,000 rows long and I need to go down this range and when theres a blank cell copy the info from the cell above. I've got some code which loops through this but I need to make sure I put "EOF and the bottom of the info to stop the loop. Is there a slicker way of writing this code?

Code:
Sub TestBlankCell()
Range("D5").Select
Do

[Code].....

View 6 Replies View Related

Simple Copy Of Named Range To Another Sheet?

Feb 11, 2013

I have a named range on one sheet, and I want to show this as a reference on other sheets. I thought this would be simple, but maybe it's just not the way named ranges are used.

Attached is a sample spreadsheet. First tab shows the table defined; in practice it would be much larger. Second tab shows how I want it to appear. I see that I can do this by copying each cell reference. But what would be nice is to simply say "Put the named range block of cells right here."

View 3 Replies View Related

Named Range: Create Copy From Another Workbook

May 28, 2008

I have a named range within a sheet. It was pulled across when i performed a move/copy - create copy from another workbook. The name contains characters that cannot be displayed or recognised and so they are displayed as square
symbols. This causes me an issue as i cannot delete the name. Even if i paste the list names, i cannot copy/paste the name as the characters are not recognised. I also tried using a macro to delete all names, which did delete all names, with the exception of this one.
The VB code used was :

Sub Del_Names()

Dim myname As Name

For Each myname In ActiveWorkbook.Names

myname.Delete

Next myname

End Sub

View 9 Replies View Related

Copy Named Range To Row Beneath Last Entry In Another

Feb 15, 2009

I have a number of named ranges on seperate sheets. As I add more entries to each sheet, the named range is naturally increasing so I dont have a fixed cell refence
Effectively what I would like to know is - is there coding that would allow me to copy one named range - and paste the values to the the row beneath the last entry in a second named range. Filtering these I can do - it is just the copying that has me stumped

View 3 Replies View Related

Copy Named Range Definitions From One Worksheet To Another

Mar 23, 2007

How can I copy the Named Range definitions from one worksheet to another in the same workbook? In case it matters, the Named Ranges refer to cells in a third worksheet in the same workbook.

View 6 Replies View Related

Find All Ranges In Worksheet And Copy Actual Cell Range To A List?

Mar 14, 2013

I have 10 worksheets. I would like to create a macro to find all the "2" values on worksheet 1, and have the actual range that the cell is, compiled into a list -example: I would like the list to be similar to this= (A1,B15 ,C8)

I even tried to record it but it doesnt show me the actual range that the data is found in.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved