When I make a dynamic named range, I typically do something like:
=offset($A$1,,,counta(A:A),counta(1:1))
I remember awhile ago I saw (within some of the comments on Jon Peltier's site, I believe) a way to make a dynamic named range without using offset. Does anyone know how to do it?
I know how to create a dynamic named range so that no blanks appear in my data validation list but have only ever done this for a list in a column, i.e...
-----A-----
1--Apple
2--Orange
3--Pear
4--Bannana
5--
6--
A1:A6 would be named Fruit, then name manager, edit: =OFFSET($A$1,0,0,COUNT($A1:$A6),1)
The Data Validation list then shows Apple, Orange, Pear, Bannana. And if I add Peach into A5 later, that then appears in the list.
What I need though is to edit this as if the named range 'Fruit' covers cells A1:F1.
------A---------B-------C--------D-----------E-----------F
1--Apple---Orange---Pear---Bannana---
2--
I use the standard OFFSET-COUNT-MATCH method to create dynamic named ranges in my Excel projects. Needless to say, this method won't work on a spreadsheet with formulas extending beyond the current range. The count function counts the cells containing formulas, even though they may contain no data. Does anyone know how to construct a formula that will IGNORE the "formula only" cells??
View 3 Replies View RelatedI have data coming into my sheet from an Access file into columns b:l which automatically get covered by a named range which changes according to the size of the data coming in.
What I'd like to create is a named range which includes this original range as well as columns a and m:p. Is this possible using Offset at all?
On top of this my data from Access comes into row 2 and I'd like the named range to cover row 1 too.
I have a problem with an offset match function. What I want to do is look at the value in cell C3 and then match it to a location in a named range and then return the value 8 rows above. The problem is the named range contains non contiguous cells i.e. D10:AE10, D22:AE22, D34:AE34. So if the value appeared in the area D10:AE10 it would return the value in the matching column row 2. How to do this I have tried lots of combinations but they just come out #N/A.
View 3 Replies View RelatedI have used Offset() for creating dynamic Named Ranges in Excel 2003. I'm a little disturbed that this usage is no longer supported in Excel 2007? Has anyone else seen this breakdown? What alternatives are available.
In my brief investigation, it looks like opening the .xls in compatibility mode allows the usage to work. However, saving the workbook as a .xlsm (since I also have macros in it) causes any usage of the named range containing Offset() to return an error (both VBA and sheet functions).
I've created a named range "Row_16" H16:M16. I've made a macro which colors the interior of this range..
Sub Fill_Row16()
Range("Row_16").Select
With Selection.Interior
.ColorIndex = 48
.Pattern = xlSolid
.PatternColorIndex = xlAutomatic
End With
End Sub
I would also like to add a secondary color (Red) to the row just below this range ie H17:M17. Is there a way to offset/ select an entire range.?
I have as the two logical operators for an IF function the following COUNTA calculation which checks how many blanks are in the range GrdMtx7 and subtracts this from the value in E5 and adds the suffix "Module(s)".
Code:
(E5-COUNTA(GrdMtx7)-1)&" Module(s)",(E5-COUNTA(GrdMtx7)&" Module(s)")))
GrdMtx7 is a non-contiguous range consisting of the following cell references on a second sheet:
Code:
='Mod Schedule'!$E$7,'Mod Schedule'!$H$7,'Mod Schedule'!$K$7,'Mod Schedule'!$N$7,'Mod Schedule'!$Q$7,'Mod Schedule'!$T$7,'Mod Schedule'!$W$7,'Mod Schedule'!$Z$7,'Mod Schedule'!$AC$7,'Mod Schedule'!$AC$7,'Mod Schedule'!$AF$7,'Mod Schedule'!$AI$7,'Mod Schedule'!$AL$7,'Mod Schedule'!$AO$7,'Mod Schedule'!$AR$7,'Mod Schedule'!$AU$7,'Mod Schedule'!$AX$7
I need for the formula of the IF function to copy down so that it refers to F5, G5, H5, I5...etc.
I also need for the non-contiguous named range GrdMtx7 to refer to the same non-contiguous range shifted down one row intact for the COUNTA function to operate on the next row down, such that COUNTA is checking for blanks in the range:
Code:
='Mod Schedule'!$E$8,'Mod Schedule'!$H$8,'Mod Schedule'!$K$8,'Mod Schedule'!$N$8,'Mod Schedule'!$Q$8,'Mod Schedule'!$T$8,'Mod Schedule'!$W$8,'Mod Schedule'!$Z$8,'Mod Schedule'!$AC$8,'Mod Schedule'!$AC$8,'Mod Schedule'!$AF$8,'Mod Schedule'!$AI$8,'Mod Schedule'!$AL$8,'Mod Schedule'!$AO$8,'Mod Schedule'!$AR$8,'Mod Schedule'!$AU$8,'Mod Schedule'!$AX$8
I can't get got to work at all using OFFSET and would rather not create dozens or hundreds of named ranges incrementing one at a time - is there a way to achieve this, preferably with a formula, but vba if absolutely necessary.
My best effort doesn't work:
Code:
(E6-COUNTA(OFFSET(GrdMtx7,1,))-1)&" Module(s)",(E6-COUNTA(OFFSET(GrdMtx7,1,)))&" Module(s)")
I have a data set that alters each week which means at the moment I have to update the ranges manually each time. I would like to use a dynamic range and think I need to use the Offset and CountIf functions. Both the start and end of the ranges are dynamic. The range is based on grouping the numbers in Column E (LocNo)
What I would like to do or think the way to achieve this is by:
First looking at Column E
Count how many cells are equal to criteria. (CountIf)
offset 5 columns left from the first cell that meets the criteria (Offset -5)
offset X rows down based on how many cells meet the criteria (Offset X)
I've include a spreadsheet spread sheet which 'should' help illustrate the problem showing the ranges I would like and how the data changes each week.
I want to use a dynamic range in order to use this formula below in column A as long as there is something entered in column H = SUMIF($N:$N,A5,$I:$I). any ideas on syntax and will this be using the offset function within excel. I know I have posted a couple times about getting this formula to replicate itself down certain columns as long as someone enters text in another. I looked into the offset reply information somone posted but it seemed a little over my head.
View 4 Replies View RelatedI have three columns of data in columns A,B,C - there are formulas in these columns that either produce a numeric value or return blank.
I have created Dynamic Named Ranges for each of them and have entered the following formula:
=OFFSET(Working!$A$1,1,0,MATCH(1E+305,Working!$A:$A,1))
My issue is that this formula is looking one row past the last numeric entry in the column (a blank) which is leaving a blank space when I graph this data.
I have a worksheet where the number of rows will change on a weekly basis and I would like to print the sheet out without having to change the print range every week.
I have tried to use the OFFSET function in the print range in print setup but once this has been entered and printed, it changes to the actual print range the OFFSET returns.
Im sorting a dynamic range as mentioned in this Sorting a Named Range. My range is called drWarningTypes and is defined as:
=OFFSET(DataSource!$A$2,0,0, COUNTA(DataSource!$A:$A)-1,1)
When there is only one cell in the range, then running the following sort function includes A1 also in the search (and also adjoining columns).....
I have a column of data that keeps getting new information in it. what i need is a named range that i can use for a chart, first point in the named range will be the first value in the column, second point will be avg. of point 1 and 2, then 3rd point will be avg. of 1,2,3 etc.
View 1 Replies View RelatedI need to create a dynamic named range called "DIVLOC," that corresponds to a sheet called Divloc_List in the workbook. Then, I need to take this range and perform a vlookup against it. I tried to create the range in the sheet itself (it wasn't dynamic), and then used that in the vlookup in the vba code, but I got error 2402 (I think). I'm not sure how to define the dynamic range in vba code, and then use the range in the vlookup.
View 9 Replies View Relatedwhat would cause the formula for a dynamic named range to keep changing on its own? I enter the following formula:
OFFSET('Raw Data'!$D$2,0,0,COUNTA('Raw Data'!D:D),1)
Which I save and somehow gets changed to the following formula:
OFFSET('Raw Data'!$D$2,0,0,COUNTA('Raw Data'!XFD:XFD),1)
This is happening to several named ranges I created. I’ve tried to correct this by editing the formula which seems to work but changes again. I’ve also deleted the named range and recreated it with the same change process taking place.
In case it matters the named ranges are being created on a table imported into Excel via MS Query.
I am trying to create a dynamic named range to select a list of text entries from a number of different columns that I am using for Data Validation. The columns have entries of variable length, none more than 30. What I am seeking to achieve is that having selected a heading in cell C3 the available list in DV dropdowns elsewhere are governed by the contents of C3.
I have created a defined name, StartPos that uses the contents of C3 to evaluate to the cell reference (e,g $H$4) of the topmost cell in the relevant column. However when I try to use it in the usual formula
=OFFSET($A$1,0,0,COUNTA($A:$A),1) formula I try
=OFFSET(StartPos,0,0,COUNTA(StartPos:[ ],1)
I get stuck at what to put in the brackets. Ideally I would like to use the COUNTA to go down to the last entry in the column. However, even when I try to give the range a height of 30 rows:
=OFFSET(StartPos,0,0,30,1) I still get an error.
My searches have not produced anything that I could apply to this situation.
I'm trying to write VBA that would:
1. Search a Workbook for Dynamic Ranges.
2. When a Dynamic Range is found the code would:
A. Determine the current coordinates for the range.
B. Change the "Refers To" value From "=OFFSET...." To "=Worksheet_Name $Column$Row:$Column$Row"
3. Save Changes.
4. Close File.
My apologies but I have very little experience in writing VBA. I understand about variables, arguments, and IF/THEN but just enough to use functions within Excel.
I want to create a charts on a pivot table, but I don't like the way Pivot charts function and the limitations they have.
So I want to create a normal charts that is dynamic and based on a pivot table.
In order to do so, I want to create dynamic named ranged for the data in the pivot table to use for the data series for the chart.
I can reference the week numbers (headers in the pivot table) for one data series and get the data by this formula:
=OFFSET(Weekly!$C$15,0,0,1,COUNTA(Weekly!$14:$14)-1)
$C$15 is the first cell that holds the data for the series.
Row 14 holds the week numbers (headers in the pviot)
However, I want to make that formula even more dynamic by having it reflect the changes done to the pivot table who's cells it references to.
So how do I do this using the GETPIVOTDATA function? (or some other function that makes it dynamic and reflect changes done to the pivot table and accounts for the row numbers with the data can change)
If I generate the GETPIVOTDATA formula and try to substistute the fixed cell reference for $c$15 with it, the OFFSET formula for the dynamic range gives an error.
And how can I grab the column headers (week number) dynamically?
I am doing an Advanced Filter, and I am using a named range in my VBA code that decides the Criteria range.
The dynamic named range is called 'Criteria' and this is the code:
VB:
=OFFSET(Sheet1!$A$2,0,0,Sheet1!$BZ$23,41)
However, when I run the VBA code, although it works perfectly, afterwards the named range has changed to:
VB:
=Sheet1!$A$2:$AO$3
I just want this to remain unchanged, as it works great. This is my VBA code:
VB:
'Filter and send data to new sheet
Sheets("Sheet2").Select
Cells.Select
[Code]....
create a dynamic named range with dates.
Example file. !
Dynamic-test-sheet.xlsx
I need an dynamic named range for column B(Project) with a date criteria.
so for example: I need a range with all records from Colomn B(Project) from year 2013.
I want to use this range to filter all unique projects by year.
I have already a filter/formula to collect a unique list of all projects.
I have a named range in a column for January data (non-contiguous cells). Every month I insert new data in the column to the right. Is there a way to have a dynamic range that grabs the same exact cells but in the new column but unselects the previous month data? Spreadsheet attached.
View 1 Replies View RelatedIn the attached workbook, I have identical sets of data in column A separated by an blank cell. I need a macro for the user form that i need to build. The code needs to find the end of each named range, (Range1,Range2 and Range3), to insert blank row at the end of each range and to copy the value of the textbox from the user form in each row so to keep the sets of data identical.
View 9 Replies View RelatedMy file has a code that refers to a dynamic named range. When I run the macro that range gets corrupted and I cannot figure it out why. before the macro the named range refers to:
=OFFSET(Manager!$A$1,0,0,MATCH("*",Manager!$A:$A,-1),3)
and right after I run the macro it turns to:
=OFFSET(Manager!#REF!,0,0,MATCH("*",Manager!$A:$A,-1),3)
I have dynamic named range that lists by columns. I can use this with data validation pull down on my worksheet and all is fine. But when I use this named range in the RowSource of a combo box in a userform, I only get the first column of data, or basically, the data in B1, but not C1, D1, ect. Here is the formula for the named range.
=OFFSET(INFO!$B$1,0,0,1,COUNTA(INFO!$1:$1)-1)
How can I retrieve the values from a dynamic named range with VBA?
Let's say we have created a dynamic list with the OFFSET function, how can I get the values of that dynamic range?
I have a sheet containing three drop down boxes which gives me a count of data in a table matching the criteria. (Between 2 dates and equals a depot name).
I am trying to create a chart to only show this data, but I don't want to do it using a pivot table as the end user has no understanding of them and just wants to fill in drop down boxes.
I am beginning to think that using a Dynamic Named Range might be the answer. I believe I am able to achieve what I want with this process but I am not entirely sure how to do it.
In the following line of code in my subroutine I name this range
which runs from A2:J2, the problem is later in the routine I delete certain unwanted columns which then shrinks this range. I always want it to be 10 colums wide. How do I make it dynamic with vba?
ActiveWorkbook.Names.Add Name:="TranslateShow", RefersTo:=Worksheets("TemplateTest").Range("$A$2:$J$2")
Can I also substitute the workbook actual name for ActiveWorkbook?
Anyone run across this.....Over the past 1-2 years...I have setup a number of complex excel workbooks, that automate a lot of reporting for my employees. Suddenly, over the past couple months, I am finding that if I try to go back and edit many of my named ranges (created a while ago) that were created dynamically: "=OFFSET(Sheet1!$A$4,0,0,COUNTA(Sheet1!$A$4:$A$65000),4)"...excel crashes. I can't figure out why.
All I have to do is simply CLICK in the "Refers to:" field of the "Define Name" window (for the dynamically named range)....and I get "Microsoft Office Excel has encountered a problem and needs to close. We are sorry for the inconvenience."
If I drill down on "What is in the report", I see this "Error signature":..
How can I DISABLE dynamic named ranges ACROSS worksheets? Is there an option or code?
View 3 Replies View Related