i have a matrix with all possible values.
i need to develop a macro, which will change the color of the cell according to the value of the cell.
for example if a specific cell in the matrix has a negative value then the macro should change the color of the cell to blue. if its value is positive then the macro should change the color of the respective cell to red.
I have made several Shapes and assigned macros to them, all is good.
What i am curious about: is it possible to highlight or change colour of the shape on press and return to normal if another is shape is pressed? Just anything to make that particular shape stand out that it has been selected then return to normal when another shape has been selected...
[Code] ....
That is the code so far that is attached to 1x shape...
I would like it to loop through all the charts on the "Graphs" sheet.
It works well but gives a "Run-time error '1004'" Application-defined or object-defined error afterward that I would like to get rid off.
VB:
Sub Colour_Chart_working()
Dim rngColors As Range
Dim rngCell As Range
[Code].....
Is it possible to search Excel by cell colour, i.e. font colour...and then change the said colour to another one?
View 3 Replies View RelatedI have a lookup that gives and RGB colour code in Cell A1; for example 186, 206, 140.
I'd then like Cells R10:V15 to fill with the RGB colour based on the result in A1.
A column of cells can be 1o different shades of green according to their value (achieved by using conditional formatting.) I want to arrange that at a certain time all the cells of a part of the row of a formatted cell are the same colour.
View 4 Replies View RelatedSo I have a macro that colors the selected cells in a certain color. Now im looking for a code that will switch that color every 7th cell, the cells will only be selected horizontally. For example:
if the selected range is 10 cells, 7 of them should be in one color and 3 of the should be in another. But if the selected range is 15 cells the first 7 should have one color and the next 7 should have another and then the last one should have the first color again, and so on..
I have an Excel 2003 program that contains macros. One of the macros hides certain command bars and disables the worksheet menu bar. On close the opposite is true. The problem is, if a user uses the disable macros when opening then the worksheet menu bar and other command bars are still available. I would like to hide all of the data sheets and display another sheet that would normally be hidden displaying a message that the macros have to be enabled for the program to work correctly if disable macros is chosen. When the enable macros are used I would like the Error page to be hidden.
View 6 Replies View RelatedI have a user that keeps a maintenance log in an Excel worksheet and sends an updated copy once a week to a board member. Two weeks ago, the board member started complaining that he was prompted to enable/disable macros on opening and became worried when my user stated that no macros were used in the book. He is now concerned that we have sent him a virus.
I know the file is clean because I've scanned it, and when I look at the file in VB, there are no modules or classes present just the Sheets 1-3 and the ThisWorkbook file. None of these objects have any code in them. My user does have some macros in PERSONAL.XLS but they are not used in the workbook in question.
No one else gets the prompt for enabling/disabling macros. Even if I set my security to prompt for any macros, I get no message. I'm convinced that there must be some setting in his Excel that is causing this individual to get this message. Is there anything else other than a macro that would cause this?
I'm creating a worksheet which tracks pupils progress in our school. down the left there is a column to put in the level they came into our school on - eg 1C or 3B etc.. to the right of the level is a colour coded row which shows Pink, Yellow and Green - if the pupil makes it into the green part of their level by the time they leave then they are on target.
Basically I have a column of cells which use a data validation list which is linked to another sheet with a list of levels. What I want to happen is when I select the level - it fills the row to the right with the correct colours.. I've attached a picture to show you what i'm trying to do.
Reason being is - we might have 6 kids on L3, and 1 on L1 so the number of rows needed for each level changes - at the moment I'm having to copy and paste - which although is easy enough, it is a bit tedious when you have a whole bunch of pupils to put on the grid.
I can't find the option in imageshack to use a thumbnail
What is the commands or script for deleting a macro automatically using
another workbook macro.
Is there a way to hide a macro from the list where you choose which to run, but not in the VBA editor? The userbox I just created calls upon 2 different macros, and has a macro to bring up the userbox. I need a way to hide the macros in Module3 from selection, but keep the macros in Module4 available to choose to run.
View 9 Replies View Relatedi want a cell to change to the colour green if 5 other cells on the page are green colour.
I want a cell to change colour to red if there are 1 or more red cells on the page.
How do I make this work?
I am trying to automatically change the colour of an oval in worksheet1 to the colour of oval3 in worksheet 2.
Currently oval3 (Worksheet 2) has the a vba code that changes its colour when you click on it.
I want a cell to be equal to another cell including the colour, conditional formatting as the colour will have no relevance to the cell value i.e. the colour will be set manually dependant on what stage of the lifecycle it is at
The original cell may have a date and be yellow and I want the target cell to be yellow with the same date, if someone then changes the original cell to be red the target cell should automatically change to Red
Is there an easy way to do this or do I need some VB script?
I have two macros. Macros 1 opens another excel file, counts the number of rows it has, inserts that number of rows into the master file and then copies the data over. Key code as follows (x3 for 3 worksheets)...
For k = 1 To numrows
Selection.EntireRow.Insert
Next k
Macros 2 'cleans' the appended data by systematically going through each row, checking if certain cells have data, and if not deletes the rows. Key code as follows (x3 for 3 worksheets)...
For l = lastrow To 12 Step -1
If WorksheetFunction.CountA(Range("B" & l & ":C" & l)) = 0 Then
Rows(l & ":" & l).Select
Selection.Delete Shift:=xlUp
edelrows = edelrows + 1
End If
Next l
Here's the weirdness. macros 1 runs fairly quick the first time out (few seconds). Macros 2 takes about 2 minutes to run (which I'm fine with). However, when I run macros 1 AFTER running Macros 2, Macros 1 goes from taking a few seconds to a few minutes.
how to use excel 4 macros. I do not even know where to put them. I have inherited some spreadsheets that have both Xcel 4 Macros and vba macros in them. (Well, I get a warning that I cannot switch them off when I disable macros on opening a workbook). I cannot even find the offending version 4 macros so that I can re-code them in VBA.
I'm trying to add colour in column E5, yellow after 34 months from the date in D5 and then red in the same E5 after 36 months. Is it possible?
Then if the date in D5 is updated, I want E5 to become white again.
I have created a Sales Data spreadsheet which is updated by 10 members of our sales team. We also have a master sheet which gets updated the moment the individual sheets are updated by the sales team.
I want to know how I can differentiate the new entries with the old ones. Is there a code I can insert in the Master File which would change the colour of the new entries, say for example, all the rows with the date field “August” should automatically be changed to yellow. Similarly all “September” entries should automatically be coloured Red.
There is one Excel file and data is filled in two sheet. I filled first sheet having a unique ID (23,25,26,27). same unique ID will be enter in second sheet. So i want that when i will enter any unique ID in second sheet then on first sheet complate row should chage in green colour for same unique ID.
First Sheet
23asin
25adout
26aeout
27afin
Second Sheet
23
26
27
i'm currently using some VBA code to insert a formula and sum certain rows. Which rows to sum is determined by the following line...
View 5 Replies View RelatedI am having a bit of trouble specifying the colours I want into my VBA code.
Please see below
I have to codes which work
View 3 Replies View RelatedBelow is a formula i am using on a spread sheet. What I would actually like to do is instead of the cell showing "OOS" if the statement is false, I would like it to show Z11 but in bold red so it stands out.
=IF(AND(Z11>=35,Z11<=45),Z11,"OOS")
Some silly twits in my organisation think they are being helpful by highlighting lines of excel and then expecting me to sort on it - how do I do this without going through every line - is there a way of returning the format value of the cell including the colour / background colour ?
Some random emoticons for you to look at while you consider...
:hungry: :warning: :wink: :roll: :lol: 8-)
how i can delete this selection by tab colour?
Thought it would be somthing like this.
If Worksheets.Tab.ColorIndex = xlColorIndexNone Then
Rows("1:11").Select
Range("D1").Activate
Selection.Delete Shift:=xlUp
condition: the cell in row K and row L can only have value 0 or 1
if cell in the column K & columb L = 1
then both cell is green colour
if cell in the column k column L
then both cell is red colour?
taking example if k1=L1 =1 then is both green colour
if k1 =1 and L1 = 0 then both are red colour
I am looking for some assistance on RGB colours.
I have a spreadsheet with cells shaded in various colours and would like to count how many cells are shaded in the various colours.
I have tried to download the Ultimate utility suggested by DominicB in the postint "Counting Colours" but I do not have access to load software onto my computer :x
Without using a macro, is this possible?
I am using
Range("E9").Select
With Selection.Interior
.ColorIndex = 36
.Pattern = xlSolid
End With
This colours the cell that colour (36) how do I say to take the colour in the cell already?
I have a problem relating to a bar chart that I just can't get around. I have Excel 2003. My problem is this. I have created an attendance record sheet for members of a club. The sheet records attendances for two separate events which occur a week apart every month. The names of the members are shown vertically in one column. Multiple parallel columns then follow in which members' attendances are recorded. At the top of the sheet, at the head of each attendance column, are two headings, one on top of the other. The first of these is the date, and the second is the attendance rate shown as a percentage. I can generate a bar chart alright from these two headings. My problem is that I want some way of showing the two different events every month as two different colours, event one in red and event two in blue, so that they will stand out. So far the chart will only let me show everything in one colour.
View 9 Replies View Related