I've been trying to create a formula that will take data with a specific status and put those in a list on a summary worksheet.
On my data worksheet I have two columns a category/ name column and a risk/status column, on my summary page I want to generate a list solely made up of names that have a specific status.
I've attached a sample.
I want to essentially create a meal plan and then have my shopping list generated from the ingredients columns/areas into a separate sheet for printing. I need shopping list generation. I have attached a sample of what I am currently working with but still needs a lot of tweaking. I am not the most advanced excel user as you can see but I continually try to improve upon all of my work.
Test_Meal_Plan.xlsx
I have a data validation list where more than one value should show the same list. Instead of make multiple range, I want to make it so if any of the values are in a cell the data validation list will show the list that goes with those values.
View 4 Replies View RelatedI have a few people all entering in data into excel, since they cannot be all in one sheet they each have their own copy. I would like to be able to extract all data where column P reads "Red" from each users spreadsheet and then delete the corresponding lines from their spreadsheet (end of day activity)
The Sheets will be named
FDEntryU1AM.xlsm
FDEntryU2AM.xlsm
FDEntryU3AM.xlsm
FDEntryU4AM.xlsm
[Code] .......
I will then need to do the same in another workbook for all items Labeled Blue, but that of course will be same code with just an item replaced.
The idea is after they close up the person overseeing the data can import all at once and leave the users with fresh empty workbooks.
I am trying to compare multiple column in a worksheet to find
common component in all the columns and what is unique to a particular
column only. And list the results/finding in adj column. What i am
trying to accomplish is something as below.
BEFORE
Sheet1 Sheet2 Sheet3
Column2 Column2 Column2
02-1234-12 07-1234-12 02-1234-12
04-1234-12 03-1234-12 02-1234-12
05-1234-12 02-1234-12 06-1234-34
AFTER
Common to all Unique to sheet1 Unique to Sheet2
02-1234-12 05-1234-12 07-1234-12
I have a need to combine multiple columns into a long list of results in 2 final columns. Here is my example...
Current layout with varying number of data points per row...
ColumnA | ColumnB | ColumnC | ColumnD | etc...
example1 | Test1 | Test2 | Test3 | Test4
example2 | Option1 | Option2
example3 | Number1 | Number2 | Number3 | Number4 | Number5
Desired Result
ColumnA | ColumnB
example1 | Test1
example1 | Test2
example1 | Test3
example1 | Test4
example2 | Option1
example2 | Option2
example3 | Number1
example3 | Number2
and so on and on and on until all rows have been filled in down the file...
Is this possible?
how to list values from multiple columns in a dropdown list based on lookup value of 1st column as below.
This is how the table looks like.
Product MOLD1 MOLD2 MOLD3
4" AB1 AB2 AB3
6" ZA2 zd4 -
This is how the dropdown list should look like for Product 4"
ab1
ab2
ab3
I have a worksheet which is used by multiple users at the same time, at the end of the day I can have upto 10 files. The layout of all the files is the same, same number of columns and rows, the only difference would be the file name eg:Test1.xls, Test2.xls etc. information in test1.xls will not be any other file. At the end of the day, these files are emailed and saved in a particular folder.
What I need is get information from all the files saved in a particular folder and keep columns which have data. Additionally, if there is no data for any columns after combining the columns to display an alert. The final file should have information with only data in individual columns and arranged in the order such as Center 1, center 2, Center 3
Eg:test1
Column A Column B Column C.....upto 30 columns
Center 1 Center 2 center 3....upto 30 centers
1 4
2
3 5
test2.xls
Column A Column B Column C.....upto 30 columns
Center 1 Center 2 Center 3.....upto 30 centers
5
The final file will look like this
Finaltest.xls
Column A Column B Column C.....upto 30 columns
1 4 4
2 5
3 5
If I'm using this function to find the specific text "EXPIRED" in the specified cells, how can I add additional cell ranges on the same sheet to this function?
D17:D34 as well as F17:F34
=IF(ISERROR(MATCH("EXPIRED",Homepage!D17:D34,FALSE)),?"OK","ALERTS")
I have information on 7 seperate sheets in a workbook and need to bring the information from each individual sheet and compile on one sheet. I know this is simple and I'm making it a lot more complicated then it needs to be...
View 10 Replies View RelatedI need to compile a list of all worksheets except Data, Attempted Calls, Completed Calls, Completed MOU, Incomplete Calls, Percent Complete, Busy Calls, and Percent Busy.
I need to put this list in B4
Then I need cells in C, D, etc to reference the value in B as the target worksheet.
All worksheets are formatted exactly the same, except the ones above.
Let me know if you need the data file or not?
I'm creating a spreadsheet to keep track of my costs of production in an online game. Within the game there are a range of spawned resources that appear for only a short time before being unobtainable these resources have specific types that is shared between multiple spawns of the resource but each resource spawn has a unique name.
My first worksheet lists all the resources and their various qualities and the later worksheets are meant to allow me to choose from a list resources matching the requirements of the item I'm looking to craft. The example i have shown in the second picture requires Tatooinian Fiberplast and Lokian Wild Wheat to craft so in the Chosen Resource column I would like to have a drop down list allowing me to select the named resource type i would like to use - for Tatooinian Fiberplast the only thing on the list should be Omnitwixi and for the Wild Wheat it should show Fizi and Krad
[URL]....
[URL]....
I am aware there are people with more pressing problems than computer games and as such
I have a workbook that has worksheeets for every day of the month. The data in the worksheet consists of columns (employee #, name, clock in/out times, and break penalty).
What I am trying to do is create another worksheet that searches all the other worksheets for a "yes" in the "break penalty" column and then create a list of all the employees that received a break penalty for the entire month. I would like this to be able to auto populate throughout the month as data is entered and not have to use a filter every time I want to compile this list.
I am starting up a project where I will be managing a certain amount of resources, for this example colored pencils (to simplify the scenario). I have just received lists from the other members of my team requesting particular colored pencils for their portions of the projects, but I do not have enough to fill all the requisitions at the same time. I have created a simplified workbook with two spreadsheets: the first of which has the list of the colored pencils I have and quantities, the second has a compilation of all the requested colors by my teammates.
My Question: Is there either a function or a known macro that would allow me to take the data in the second sheet to create a list of who is waiting for which pencils in the first sheet? And could this waitlist be organized by the order of how many pencils each person had requested with people with fewest requests first?
I am trying to achieve the following. In D2: AQ2 there a values indicating the subject identifier for that column, eg in D2 it is SEN and E2 is Art. Each row represents a pupil name into which grades are inputted. I want to compile a list of column identifiers that corresponds to a D grade (it could be D, D- or D+) eg
A2 Name ----D2 SEN --- E2 Art --- F2 Business Studies
A3 Bob ------D3 D+ ----- E3 A -----F3 C
A4 Tim ------D4 C -----E4 D------F4 D
A5 Pete------D5 D------E5 D+ -----F5 D-
Expected output for Bob is SEN. Expected output for Tim is Art, Business Studies. Expected output for Pete is SEN, Art, Business Studies.
I've enclosed a small sample of the actual worksheet. Expected results for row 3 start in cell CP3.
Basically I have a big table containing several columns for the different quarters. (Each quarter has several columns which are not all next to each other)
I would like to use 4 checkboxes which the user can select the show or hide the columns for that quarter. E.g. if Q1 and Q3 are checked only those are visible)
(if quarter 1 clicked than all columns are visible if unclicked hidden).
The code I have written workes well for the first checkbox (Q1), but for the other quarters (Q2, Q3 and Q4) the columns get hidden when checked (which should be the other way round) and don't get unhidden when unchecked.
Sub CheckboxQone()
If Range("$A$1").Value = True Then
Call showQ1
Else: Range("$A$1").Value = False
Call hideQ1
[Code] ...........
I have attached a sheet that has part of a data list, sheet called (Full Data) what i am trying to do is seperate the data into event locations into individual sheets.
The data ref will be column F which is the different event locations.
I thought the best way to try and do this was to create an if/ match formula using the sheet tab names as the if match, with the event locations in column F.
I have added two sheet tabs so you can see that i require the data for (Ain) to be put into the Ain sheet.
The data list in Full Data sheet will be continuously updated so i will need the range to be around 10,000 entries.
I have data in sheet 1 like below
Custid loc city
123 us newyork
124 uk wales
876 in mumbai
Sheet 2
custid newcustomerid
123 756
124 394
Outputsheet:
Custid loc city
756 us newyork
394 uk wales
876 in mumbai
So it will check sheet1 custid with sheet2 custid. If both matches it will replace custid with newcustid.if cust id not exists it will load sheet1 recprds as usual.
I'm trying to count the number of unique values from a list of over 8,000 records -- and it's very likely that nearly all of the records are unique. At the moment, I am keeping track of an array where I store every unique value I find, expanding the array and adding values as I go, and at the end return the size of the array to tell me how many unique values there are in the range. My method works, but it is very slow, even when I turn on manual calculation.
Here is what I have so far:
Function CountUniqueCases(inputRange As String)
Dim i, j As Integer
Dim cCaseID As Range
Set cCaseID = Worksheets("Results").Range(inputRange)
Dim uniqueCases() As String
Redim uniqueCases(1)
uniqueCases(1) = cCaseID.Cells(1).Value
Is there a faster way to do this? I was hoping there was an array search function built in to VBA, but apparently not. My first attempt at running this function returns about 7904 out of ~8000 as being unique.
I have a macro that converts all my PDF Purchase Orders to a text file and inserts the data/text horizontally into another document. However because the PDF's or the text within the PDF can be fomatted differently (that is on different lines etc) it therefore imports the information and it looks mis-aligned.I have attached a simple spreadsheet showing some sample text as it is imported and then below this how it should look like, all in line.
The range where the highlighted text in red is, is variable (but say nothing more than a variant of 10 columns). The text can also be Uppercase or Lowercase.So, I was wondering if there is macro code to find the "text" on various rows/columns and align it all in another column?
I am trying to make a single drop-down list which contains values from two columns.
I should give you the example immediately:
NAME | SURNAME (these are two columns)
Jon | Alfa
Karl | Beta
Lilly | Wolf
And the drop-down list should look like this:
DROP-DOWN
Jon Alfa
Karl Beta
Lilly Wolf
I have already tried to solve my problem with data validation but with no success.
I am trying to figure this out. I have a userform with one listbox with 7 columns that displays a range. It is working except i cannot get the column headings to work.
View 4 Replies View RelatedI would like to get a unique list of letters from multiple columns.
I tried to use this formula below but it does not work with multiple columns....
I have the following in a Validation/Data the following tries to reference and array f2:j11
=if(d5="",teammember,index(teammember,match(f2,teammember,0)))
The array 'teammember' refers to cells f2:j11. Formula returns an error message that it can only refer to a single row or column. Is there a formula
I have a long list of 2 columns containing data as follows:
country1 date1-1
country1 date1-2
country1 date1-3
country2 date2-1
country2 date2-2
country3 date3-1
country4 date4-1
country4 date4-2
country4 date4-3
which I would need to move to get one column per country with the top cell the country name and below each name all the related dates, e.g.
country1 country2 country3 country4
date1-1 date2-1 date3-1 date4-1 etc.
date2-1 date2-2
date3-1
I have searched and found almost similar questions and tried to apply it to this case, but not being versed in VBA it was a failure on my part
I need to consolidate these two lists of data into one list.
First set is just a basic list of individuals with their data.
Second set is multiple entries for those same individuals. Each entry shows a subscription to a programme. The final single sheet should have one row per individual which shows all of the programmes they are subscribed to.
See attached, example sheet.
The real list is 3000 IDs, so need some kind of formula to do this.
I am trying to create a drop down list that when selected will display data in the 10 rows below and 4 columns, so a total of 40 cells. I would like the data to be based on the selection in the drop down list.
The data looks like this,
RequirementsQtyResourcesQty
Level 1 Sentinel10Level 1 Sentinel105
Level 2 Sentinel10Level 2 Sentinel167
Level 3 Sentinel10Level 3 Sentinel156
Level 1 Banga20Level 1 Banga401
Level 2 Banga20Level 2 Banga307
Level 4 Banga20Level 4 Banga0
i have 27 different combinations of the above list with up to 10 different rows. I have a label for each one, but i cannot get the rows below my drop down list to display the proper values base don the selection in the drop down list.
I want to sort the list like this:
1) If there is a zero (null) value in all 3 months, these records should be at the bottom sorted by record name (I did not show this field in my file).
2) If there is a non-zero (non-null) value in any of the 3 months, the records will be sorted with each other by total change.
Is there a way to do this without me doing sorts multiple times and manually moving rows of data around (which is what I have done to arrive at the list I have attached)? I am not experienced with VBA or Macros, and would prefer a detailed explanation if a solution is using either method.
I'm trying to set up a billing form for my work. I'm trying to include drop down list for each sections (personnel, equipment, and supplies), then all sum together as a bill. I'm not sure if this is doable in excel.
View 9 Replies View RelatedI'm looking for a way to convert an old church address list that is formatted in a single column. There are no blank rows, but the amount of rows for each entry can vary. For instance, there could be as little as 3 rows of data (church name, address, city/state/zip) or more if email addresses and websites are provided.
The data is currently in the format below (notice how one entry has a website while the other does not).
First Church
102 Main Street
Dallas, TX 12345
email@whatever.com
Second Church
500 Second Street
Austin, TX 12376
email2@whatever.com
http://www.boguswebsite.com
So I'm looking for the data to be formatted like the following:
First Church 102 Main Street Dallas, TX 12345 email@whatever.com
Second Church 500 Second Street Austin, TX 12376 email2@whatever.com http://www.boguswebsite.com
I was able to find the following code from a Google search, but it can't dynamically adjust the range.
Sub x()
Dim rng As Range
Set rng = Range("A1").Resize(5)
Do Until IsEmpty(rng.Cells(1, 1))
rng.Copy
Cells(Rows.Count, "B").End(xlUp).Offset(1).PasteSpecial Transpose:=True
Set rng = rng.Offset(5)
Loop
End Sub
I think what I need to make this code work is a way to dynamically adjust the range so that it can determine when to move to the next row of data. Static ranges break the process due to the amount of data being provided not being uniform. What I was thinking is that I could use the word "church" as a start point and end point in a loop so the script knows when to jump to the next row and begin copying the proper number of columns. I'm just not sure how to accomplish this in vba.