VLOOKUP Gives Error With False Expression
Mar 1, 2010
I have a formula that has been working and it looks like this
=VLOOKUP(A13;'IFS export'!$A$1:$F$19000;4;FALSE)
Now I want to use the same formula in an other workbook and it gives an error
=VLOOKUP(A2;DRAWING!$A$2:$C$9168;3;FALSE)
When I type this formula I get the window that says
"This formula contains an error.
*For information about fixing common formula problems, press help.
*...........
*..........."
And if I go and try to change the first formula that has been work it gives me the same error.
View 9 Replies
ADVERTISEMENT
Dec 7, 2009
Using Excel 2007 the below code causes Run Time Error '16', Expression too complex.
It works fine in Excel 97, 2000 and 2003.
why this would now cause an error?
My search on google only refers to this error in relation to charts.
View 6 Replies
View Related
Jan 22, 2013
I am getting 'Constant Expression Required' and this line of code highlighted.
Code:
Const sFile As String = ThisWorkbook.Path & "Survey.xlsm"
View 5 Replies
View Related
Apr 1, 2014
I'm trying to use the macro below (twice but with different variables) but everytime I get the error "Compile error: Constant expression required".
[Code]....
View 3 Replies
View Related
Jan 15, 2009
I have 2 columns of data: Column A is basically postcodes, but just the 1st part and Column B is a #2. If somewhere else on the sheet I type in the postcode IE. SW19 it will show besides it in my lookup the number 2. However if I type in a postcode that is not listed in Column A, I'd like to to return the value 1. I cannot figure this out. My code is:
View 3 Replies
View Related
Sep 16, 2009
How do I re write this formula to incorporate iserror function to show "" when a value of false or N/A is found.
=IF(K8<>"",VLOOKUP(F8,'My Sheet'!$F$2:$I$489,4,FALSE))
View 9 Replies
View Related
Feb 21, 2014
If a value in cell A1 on Sheet Report is found in Range B2:B10 on Sheet Hierarchy Then return True Else False
I have the following so far:
[Code] .....
I want Match to be either True or False. Also, is there a way to know the cell the value was found in if True? How do I make this work?
View 1 Replies
View Related
Jan 17, 2012
I have the following formula,
=IF(AH10="","",IF(VLOOKUP(AH10,Sheet3!C:D,2,FALSE)="","",VLOOKUP(AH10,Sheet3!C:D,2,FALSE)))
that I would like to return a blank cell not N/A if the value that is in "AH10" is not found.
View 9 Replies
View Related
Jan 7, 2010
if Statement A: =IF(M4>$B$17,0,LOOKUP(M4,$AA$20:$AB$29)*$B$15/12) works very well
if Statement B: =IF(M4>$B$17,0,LOOKUP(M4,$AA$36:$AB$44)*$B$15/12) works well too
now I am trying to say
=IF('Input Page'!B36="yes",(IF(M4>$B$17,0,LOOKUP(M4,$AA$36:$AB$44)*$B$15/12),(IF(M4>$B$17,0,LOOKUP(M4,$AA$20:$AB$29)*$B$15/12))))
Basically, if B36 is yes, use If Statement B, otherwise IF Statement A. If I write Yes, I get a "Value" error, if I change the yes to 1, I get a FALSE error.
View 2 Replies
View Related
May 27, 2007
If I create a simple conditional statement in a cell:
=IF(A8="NX-QSNT",B8, "")
I get the expected B8 cell contents when "NX-QSNT" exists in A8, or blank when it doesn't.
If instead of qualifying this full string, I try to Search for the "-QS" string in that cell as the criteria:
=IF(SEARCH("-QS",A8),B8, "")
I get the expected B8 cell contents when "NX-QSNT" exists in A8, but I get "#VALUE!" if it does not find this "-QS" string.
I'm guessing it may be because SEARCH isn't actually returning a TRUE/FALSE response, but rather, a numeric one based on the position of "-QS". I tried using a numeric approach also, but this didn't help:
=IF(SEARCH("-QS",A8) > 0,B8, "")
View 9 Replies
View Related
Apr 21, 2014
i have a formula in a cell:
=IF(ISERROR(VLOOKUP($D11,PRMC!$O$15:$P$1048576,2,FALSE)),"",VLOOKUP($D11,PRMC!$O$15:$P$1048576,2,FALSE))&IF(ISERROR(VLOOKUP($E11,PRMC!$O$15:$P$1048576,2,FALSE)),"",VLOOKUP($E11,PRMC!$O$15:$P$1048576,2,FALSE))
The first half of the vlookup searches for data and returns a dollar amount if true The second half of the vlookup searches for another data set and returns a dollar amount if true...
Both amounts could be the same, so I cant use a formula based on numeric value
the conditional format must determine which vlookup is returning the result
in other words I'd like to conditionally format (grey fill) if the first vlookup returns data and conditionally format (blue fill) if the second vlookup returns data
Probably have to "use a formula to determine which cells to format"
View 7 Replies
View Related
Mar 10, 2009
Where in this function would I put " " to return a blank field if false is returned?
=IF(D18>=1,(VLOOKUP(C18,C7:E13,2,FALSE))-(VLOOKUP(C18,C7:E13,3,FALSE))+(VLOOKUP(C18,C7:E13,3,FALSE))*D18)
View 4 Replies
View Related
Mar 26, 2014
I'm trying to create a rec report, ideally on one page, for multiple criteria. The situation is we get a report on our trade positions (investment stuff) from an outside service we use. We also have a report internally from what we've booked. We're looking to tie out are basic things like price, original par, revised par, trade date, counter-party banks, etc. I've consolidated data from both sources on one page (DATA) where all data points are lined up (say EXTERNAL is from rows 1-500, and INTERNAL is 510-1010). Now I need to create a front page showing the result of each tie-out. The lookup value will be a combination of the fund name + trade ticket number which would almost guarantee a unique ID (fund name XYZ, ticket number 12345 = XYZ12345)
Current tabs on spreadsheet: DATA, EXTERNAL, INTERNAL. I need to add a REC page
Question: What formula can I use to check on each and return TRUE/FALSE? The goal is to have about 8 columns on the REC, each for one of the tie-outs (let's use price as an example.). I know the basic VLOOKUP to return one value, but it appears in this case I will need VLOOKUP to check two matching values based on unique ID XZY12345, compare the price, and return TRUE if they match, FALSE if they don't
Here's something I saw from one of our spreadsheets that I think does the same to confirm counter-party, though I have no idea how to read this lengthy formula.
=EXACT(VLOOKUP(IF(Q2="COMPANY",R2,Q2),FUNDS!$M$1:$N$400,2,FALSE),
INDEX(PENDING!$G$4:$G$3218,MATCH(CP!C2,PENDING!$N$4:$N$3218,0)))
View 9 Replies
View Related
Jan 14, 2009
I need to create a formula that will give me True or False if text in a cell matches any cells in a range.
For example:
Column A and B have text:
Account
Date
Name
Species
Column C has other and sometimes matching text:
Name
Deal
What formula would I use to find out if all cells in Columns A and B are represented in Column C?
View 3 Replies
View Related
Apr 23, 2014
I have a table arranged by columns into SETS of results. I am looking for a way to mark all the columns of a set as false if any one column of the set is false.
View 4 Replies
View Related
Jan 8, 2009
I am receiving a run-time error with following code. The error message is "unable to get the VLookup property of the WorksheetFunction class". I only receive the message when the lookup value is not found in the table.
I thought adding the "False" command at the end would return an "N/A" but it didn't. Is there anything I can add to avoid this error?
View 3 Replies
View Related
Mar 15, 2008
I want to count the number of cells in a row containing a value greater than a fixed number but less than a number entered in another cell.
For example, in the cells A1..K1 I want to know the number of cells which have an entry greater than 7 but less than the value I have entered in cell M3. I have used the COUNTIF in other circumstances but I cannot find out how to use it with this "greater than and less than" condition?
View 9 Replies
View Related
Nov 15, 2006
I am trying to Sum lines of info with "True or False" and "Yes and No". I would like to assign 1 to True and Yes and 0 to False and No when I total the rows. Never tried this in Excel, on Lotus and the formula does not work. I can find and replace, but I would like to be able to use a formula.
View 2 Replies
View Related
Jul 14, 2009
I'm having trouble with the Rmdir statement.
I have tried ...
View 10 Replies
View Related
Mar 26, 2009
I'm trying to make an expression to calculate some fields in Excel 2007.
Trying to check fields up to a given number and give them a high multiplier, and add the rest of the numbers with a lower multiplier.
I have multiple fields with numbers in hundreds. I want to multiply the sum of this fields (up to 500) with 4. But the expression must also start the count from the first field, and when im hitting 500 as a sum I want the rest to be added with 2 as multiplier (the reason for the prioritizing of the fields is that they also have their own values/multipliers, but I'll skip that to avoid to much confusion here).
It's probably a lousy description. I'll give an example:
Field 1__Field 2__Field 3____Sum
100____300_____500______2800
How in earths name did I get that Sum you might ask.
((100 + 300 + 100) * 4) + (400 * 2) = 2800
400 is the number left from the third field wich I only want to multiply with 2 instead of 4.
Another example:
Field 1__Field 2__Field 3____Sum
300____600_____500______2000
((300 + 200 + 0) * 4) + (900 * 2) = 3800
900 is taken from the rest value of field 2 and 3.
If there any way of doing this "sum check and multiply, and then add the rest with a different multiplier"?
View 11 Replies
View Related
Jun 21, 2014
With Excel you can do If(array, array2, false) to poplulate another array. Is there a way to replication this without looping. For instance can the IIf hold an array as its expression or is there any other way of replicating this If statement without looping?
View 4 Replies
View Related
Mar 15, 2014
I want to apply regular expression for password
a) The first letter cannot be number
b) the password should have a combo of numbers letters and one special character
c) The password should begin with a big case letter
View 1 Replies
View Related
Oct 29, 2008
Here's what I need to do. I have a list of row numbers in AA2:AA6, so for i =1 to 5
I want to insert a page break before cell (column AA and Row(#in cell AA2-5))
View 14 Replies
View Related
Jul 22, 2009
what the long expression for the range being summed below.
Reason: I need to exclude some cell values.
View 11 Replies
View Related
Jul 31, 2009
I'm trying to figure out the whole Regular Expression thing...so I figured Hotpepper's EXDATA UDF would be a good place to try and rewrite with Regular Expression...I got it to work...but not sure why as it seems opposite of what I would have expected...
eg pattern [^/d] i thought would give me everything except numerics...but it appears to be giving me numerics....
here's the code and sheet...can someone help explain what's going on? .......
View 9 Replies
View Related
May 24, 2007
I am currently using a SUMIF statement as follows: =SUMIF(W1:W1500, "Charnwood" & "*", S1:S1500). The problem i am having is the fact that SUMIF doesn't work with a reference to a closed worksheet. I tried using SUMPRODUCT but it did not work. The reason it didn't work is because I need to find in column W anything with Charnwood and anything else past it, auch as Charnwood Estates. This is what I tried: =SUMPRODUCT((W1:W1500="Charnwood")*(W1:W1500="*")*(E1:E1500="S"),S1:S1500)
which of course is a syntax error.
View 2 Replies
View Related
Jul 9, 2007
I need a nudge in the right direction here. I have found several examples on the board that have spawned some ideas but need a little more help.
I am looking to enter variables into 2 columns A and B and then run these variables through an expression.
I have already done basic cell math and want it to be cleaner by using VBA to run the calcs and then spit the answers back into the spreadsheet.
I think I have an idea as to how it need to function but do not know the exact commands to make it efficient.
View 9 Replies
View Related
Feb 22, 2009
I have been reading the different post here on the forum.
I have found a snippet of code that will open a pop-up message from a value of a cell. I would llike to do this on one of my reports. Here is the scenario.
Range (R5:S5) 0.15 them MsgBox "Note Must Be Entered For +/- 15% change"
But There are 14 different cells that I want this to work for. The value differs from day to day, and this should pop-up happen without a user having any actions other then the calculated value. But ones the note is entered in the "Notes: cell the message will not return.
Hope I explained it correctly.
The value of the cells in question are calculated in each cell with a formula example "=IF(ISERROR(Z20/H5),0,IF(ISERROR(Z20/H23),0,(Z20/H23)))"
View 9 Replies
View Related
Mar 25, 2014
In excel 2007 i need to do a formula...
I have the number of hours and de couste...in an other cell i have the expression that says that is paid or not....
I need only sum the cells that have the expression paid ...how do i can do this?...
View 1 Replies
View Related
Jan 28, 2010
I have this COUNTIFS expression buried in a larger formula:
COUNTIFS(Table[C7],Table[C7]&"",Table[C21],">=1")
and it always returns a value of zero or some positive integer.
I'm now looking for a little "function" that I can wrap around this expression that will:
A) indicate any non-zero result as 1 or TRUE
and
B) indicate any zero result as 0 or FALSE
Something like...
AREYOUNONZERO( (COUNTIFS(Table[C7],Table[C7]&"",Table[C21],">=1") )
I'm sure there's a fairly efficient way to do this... but I'm totally stumped at the moment!
View 7 Replies
View Related
