Date Due
Date Ressolved
5/16/2013
5/17/2013
5/16/2013
5/9/2013
5/9/2013
How do I make this change, If the date resolved column has not data entry, but todays date is past the due date cloumn data entry change cell red and insert text to read "past date due"
How would you write a formula where the sum depends on what dates you enter in A1 and B1?
Date cells C1 to C365
A1 start date
B1 end date
Example:
A1 = 1/1/14
B1 = 1/31/14
So cells C1 to C31 will be added.
"=sum(c1:offset(c1,(b1-a1),0))
This formula works, except if you enter a different starting dates, it just counts from c1.
I have a column of over 20,000 rows, showing employee hire dates. For the purposes of a specific calculation, I want to replace all the hire dates that are prior to 1/1/2011 with 1/1/2011. Is there a simple way to do this all at once with a Replace statement in my code without having to look at each record individually?
I know how to replace one specific date with another all at once, but I don't know to do it when I'm looking for more than one specific date.
I would like to change the color of a cell to either green, yellow, or red based on a few conditions. One of the conditions would be based on whether a check box was checked or not.
View 2 Replies View RelatedBasically, I have a Userform and am trying to have a user enter 1 datapoint into a Textbox. Based upon that datapoint (it's 9 digits), I am trying to see if I can therefore reference a linked Access Table to fill in other textboxes with information tied to that record (so if they enter a unqiue ID, I want to automatically return Name of Person, Location, etc.) . I liken it to a vlookup in regular Excel but am just not sure how to go about it in VBA.
View 2 Replies View RelatedI currently copy/paste sports data from the web into MS Excel. One of the columns pasted contains "Won-Loss", which appears as '1-0' on the web. However, once the data is pasted, Excel identifies this field as a date and changes the value of '1-0' to 'Jan-'00. I would like to insert a new column and convert the field back to text (i.e. Jan-00 to 1-0). I have attempted several formulas, however no luck as of yet.
View 9 Replies View RelatedHere's a simplified example:
ColA
ColB
ColC
Row1
A
Y
A
Row2
B
N
D
[Code] .........
I'm looking to return the values in column A adjacent to the cells in Column B equal to "Y". The kicker has been returning only the cells where the condition is true. Column C displays the desired behavior.
The closest I've been able to get is with a simple IF statement but I'm pretty sure the answer is a far cry away from there and likely requires an array formula. I'd prefer not to use VLOOKUP or OFFSET but will if the alternative is very complex.
I have a spreadsheet I'm trying to make which will have various cells change color based upon the date entered compared to today's date. Here are the details of it, and what I've tried to do so far:
Various safety tickets that employees acquire have a 3 year expiry date on them. What I want to do is be able to enter in the issue date, and then have the conditional formatting color the cell that contains the date based on the following criteria:
Green = More than 6 months remaining
Yellow = Between 6 months and 30 days remaining
Red = 30 days until expiry
Black = Expired (I wanted to eventually add this one, but Excel 2003 was only allowing me to add 3 conditional formatting conditions, so I just went with the 3 colors. I'm getting Excel 2007 later today, so I might be able to add more with that)
Now here is what I have so far:
3 years = 1095 days, 2.5 years = 913 days, 2 years and 11 months = 1065 days
N3 = 913
N4 = 1065
Conditional Formatting on cell C21
Condition 1 - color Green
=$C21+$N$3>=TODAY()
Condition 2 - color Red
=$C21+$N$4<TODAY()
Condition 3 - color Yellow
=AND($C21+$N$3<TODAY(),$C21+$N$4>TODAY())
I am trying to use conditional formatting to color a cell based on a date. I have a date in cell "a1" as my base date (no formatting needed). I have dates in cells "a5:a10".
I need those dates (a5:a10) to change color based on the time from "a1".
Less than 1 year = no formatting.
Between 1 year and two years = yellow.
Over two years = red.
I have tried different settings / formulas in the conditional formatting option, but I can't make it work. Do I need to use visual basic to do this?
I want to create a chart than logs the progress of a project at work. Column 1 will have a series of target dates for certain tasks and column 2 will be filled in with the completed dates. I want automatically colour a cell (RC) based on the date given in the cell to the left (RC[-1]) giving a traffic light style warning of an upcoming target date and colour coding the cells when a task is completed on time (or not!). I can work out what the conditions are by creating 2 sets of 3 conditions (1 set if cell (RC) is empty and 1 set if cell (RC) has a date or "N/A" in it).
My conditions are:
1. Turn the cell background colour red (action overdue) if:
Formula Is:=IF(AND(RC[-1]"",RC="",RC[-1]
2. Turn the cell background colour orange (action required) if:
Formula Is: =IF(AND(RC[-1]"",RC="",RC[-1]
I need a macro I can run that will insert a row whenever Column A changes (from PPN A to PPN B to PPN C, etc.) and that will insert string values into the Cells as follows:
In all cases, the insert cell values into column A (PPN) will be the value from the previous cell and column B (CPN) will be 'LABOR'
Here's image of before and desired after:
Before:
PPNCPN
4AQ02SLAG
4AQ02SAND
4AQ02CHIPS
4AQ02PORTLAND
4AQ02ADMIX
4AQ02AUTUMN BLEND
4AQ02OVERHEAD
4AQ03SLAG
4AQ03SAND
4AQ03CHIPS
4AQ03PORTLAND
4AQ03ADMIX
4AQ03BETHEL BLEND
4AQ03OVERHEAD
After:
PPN CPN
4AQ02SLAG
4AQ02SAND
4AQ02CHIPS
4AQ02PORTLAND
4AQ02ADMIX
4AQ02AUTUMN BLEND
4AQ02OVERHEAD
4AQ02LABOR -insert row and populate cells here
4AQ03SLAG
4AQ03SAND
4AQ03CHIPS
4AQ03PORTLAND
4AQ03ADMIX
4AQ03BETHEL BLEND
4AQ03OVERHEAD
4AQ03LABOR -insert row and populate cells here
II want to sum the values under 'amount' column only if the corresponding value under 'Balance' column is "Paid"
NameAmount Start Date End Date No.of DaysInteresetBalance
Sat1 250 1-Aug-07 20-Aug-07 19 - "paid"
Sat2 550 4-Aug-07 20-Aug-07 16 -
Sat3 250 10-Aug-07 20-Aug-07 10 - "paid"
Sat4 450 6-Aug-07 20-Aug-07 14 -
Total PAIDAMOUNT(B1:B4)
For the above, the sum value should be 500. I have written the following function to calculate the same. On uncommenting the line 'paid = CStr(paidvar)' the value is displayed as '#VALUE!'. On uncommenting all commented lines, the value is displayed as 'Paid'.
Function PAIDAMOUNT(amountRange As Range) As Variant
Dim count As Long
Dim paidvar As Variant
Dim paid As String
Application.Volatile True
PAIDAMOUNT = 0
For count = 1 To amountRange.Cells.count
paidvar = amountRange.Offset(count - 1, 7 - amountRange.Column).Value
'paid = CStr(paidvar).................
I have a spreadsheet that tracks publication dates and review dates. I would like the publication date to change color based upon its relationship with todays date. If the publication date is equal to or older than two years from today turn red, if it is equal to or older than a year and a half from today turn yellow. This seems like a pretty simple formula but I have tried several times and I can't seem to get it to work.
View 3 Replies View RelatedI have a simple due date spread sheet for tasks that need completing at work. I am able to make the 'Due date' cell turn red when it is equal to or less than todays date, using conditional formatting. No problem.
I also have a 'Date closed' cell which is populated with a date when the task is complete.
What I am struggling to do however is change the red 'Due Date' cell to Grey once the 'Date Closed' cell is populated with a date. In fact I would like the whole row to be greyed out once the 'Date Closed' cell is populated.
I also have an 'Open / Closed' cell, which tells me if a task is open or closed, being chosen from a drop down I installed. Could this be used as an alternative to the 'Date Closed' cell. ie If someone selects 'Closed' in cell A4 the whole A row goes grey.
Each item (row) in my sheet contains a logged date in column A, and a priority Level in Column G - which is via a data validation drop down (1 to 3).
What I would like to do is create a conditional format based on what the priority level is, and whether it has expired its allowed resolution time based on the logged date.
For example a Level 1 priority requires a 1 day fix, a level 2 requires a 5 day fix and a level 3 requires a 10 day fix.
If the priority level is a 1 and the logged date is over 1 day old i need the whole row to change colour. If the priority level is a 2 and the logged date is over 5 days old I need it to change colour, and if the Priority level is a 3 and the logged date is over 10 days old I need it to change colour. The colour can be the same each time, but I just need to know how to get it to trigger.
I think I have used an IF(AND( formula in the past, but cannot remember how to do it.
I'm trying to sum across multiple worksheets based on a simple condition. I have a time sheet with a worksheet for each week (52 worksheets). I've gone back and added a column to code the type of work done, types 1 - 17. I want to sum the hours of each type across all worksheets. This is what I have that doesn't work:
View 10 Replies View RelatedI have a simple problem I am trying to find a set a values on a column and what to replace once found with the first 5 most left characters. Example:
in column A I can have text and numbers; the numbers that I want to find are in the following format xy:zw / xy:zw on each case the values can be from 0 to 9 so this is tons of posible combinations, I been trying to use **:** ? **:** but I don't get none. This is what I am doing
Set target = Sheets("Sheet1"). Range("A1:A9000")
For Each cell In target
If cell.Value = "**:** ? **:**" Then cell.Value = "00.00"
Next cell
A example would be 02:47 / 03:15 the next row could have 03:15 / 04:09
and so on however I could have text in some rows. In reality I would like to find and replace the cell.value with the Left 5 characters if the cell contains ANY value maching that format. Text in that column will never have that format combination
I am trying to use conditional formatting to calculate when the date in the top column gets within 60 days from expiring to turn yellow, 30 days from expiring to turn orange and when it expires to turn red. The dates that are listed from row 5 down are when the classes were taken. the expiration date will be based on row 3. Some are annual,3 years and 5 years, etc. I am using Excel 2010....
View 10 Replies View RelatedI just cannot think through this conditional formatting statement.
The conditions:
-- If the current (todays) date is 8 working days after the created date, then highlight in orange
-- If the current (todays) date is 10 working days after the created date, then highlight in red
On other words...
-- The dates that will get highlighted in red are overdue for processing
-- The dates that become orange are approaching the overdue time
-- Any dates that are less than 8 working days are NOT highlighted at all
I have a sheet where i need to highlight cells C3:C140 based on approaching dates. The cells C3:C140 contain dates generated from another file and would be random approaching dates.
The conditions are
1) Approaching Weekends (Sat and Sun) = always turn red
2) 3 days after today = orange
3) 2 days after today = dark orange
4) Other days = light orange
I have a listbox that lists some items from a spreadsheet, but what I cannot figure out is how to have the font color of the items be RED if the value if negative, and default BLACK when positive...
how to alter the code to accommodate this?
VB:
With UserForm1.ListBox4
.ColumnCount = 5
.ColumnWidths = "2 cm;3 cm;3 cm; 3 cm; 3 cm" [code].....
Formula which will count unique values in column A based on condition in Column B which "y" .....
Show ranges as A:A instead of A1:A100 as I dont know the size of the table, it can be thousands rows .....
I am working on creating a simple Excel Database of an Engineering Tool Room Inventory for work. However I can not seem to get one particular 'NESTED IF Function' to do what I want it to do. (In advance warning, I may be going down the wrong route and might have used the wrong Formula in Excel but from my understanding the 'IF' function seemed the most plausible.
Issue: All I would like to do is for a NESTED IF Function to be able to say this:
1. When a user inputs data into one column, for example 'Column A', with the following data: 4" Square
2. Then the neighbouring column, for example 'Column B', would have a NESTED IF Function.
3. Which would output a logical response, "A, B, C, D, E, F etc...", depending on what is written in Column A.
If 'Column A' - 4" Square, Then 'Column B' - A
If 'Column A' - 5" Square, Then 'Column B' - B
& So on...
But the NESTED IF Function should only put a logical response if there is certain values within the cell, for example:
User types a value into 'Column A' which contain - 4 & S, Then 'Column B' - A
User types a value into 'Column B' which contain - 5 & S, Then 'Column B' - B
& So on...
Currently to do the above function, I have utilised the following Excel NESTED IF Function:
[Code] .....
& The following happens:
1. User inputs data into 'Column A'
2. The NESTED IF Function then provides an automatic response.
3. However it relies on the data being inputted without the ' " (Quotation Symbol)'
4. & With me defining the exact phrase that should be typed into the cell, for example, "4" Square"
Other: I have attached an example worksheet of the NESTED IF Function in practice, with two tables. One showing what is happening with the code above and one table showing what I would like to happen but with no function.
Example - IF Function.xlsx
I have been struggling with this formula for ages and have finally given up. What I would like to do is to do a lookup on the concatenated values of Province, Department and Initiative No, which has mutiple values in the status of milestone column, and then give the answer based on a condition.
The condition for this example should be, that if the returned status / or statuses of the initiative is all 1, then the value should be 1, if it's all 2, then the value should be 2, and so on.....but if the values returned from the status of the initiative is a combination of 1,2 or 3, then it should give me the answer 2. If 4 is part of the comination of values returned, then the value should be 4.
Zero - 0 should be excluded from the formula as it is part of planned values and not actual.
I'm having trouble with the two formulas working in conjuction with each other.
Condition 1:
=(MOD(ROW(),2)=0)*(COUNTA(3:3))
Condition 2:
=TODAY()>=A1
"Condition 1" seems to override "Condition 2"? Ever see that?
I am trying to figure-out how to set up conditional formatting of dates in a column (e.g. Date Submitted) and have these dates, and/or cell, change color as time progresses. I have Excel 2007.
For instance I have an application submitted on 11/20/2011 in a cell. I would like to have the date change color (Yellow) after 30 days have passed.
Then do the same except change to Red after 60 days have passed the date.
I searched the forums and did not find this particular problem. I of course may have missed it too...
My guess was to try "$A$1
I want to sum values in column "C" based on if they fall between and equal to two dates, dates in "A" and a varible in "B"
Column "A" a2-a32 dates of each day in Jan 09 31 days.
Column "B" b2-b32 letters either X Y Z randomly through range some cells may have a letter.
Column "C" Dollar value
in cell D1 Startdate in cell D2 Enddate
Formula located in D3 is the sum of all values falling between the date ranges and by one of the letters X. D4 Y. D5 Z.
I'm try to lookup a range of dates in a table, and sum up the data values that is equal or less then the specified dates.
Please view the attached spreadsheet for example.
I might be using something completely wrong here, but can anyone tell me if this code is possible or am I being very naive.
H4 and I4 are cells in which I want to enter dates, and then I want these dates to be used in a custom filter on another page.
Below is what my limited understanding of VB came up with.
Sub Date_Range()
Dim First As Date
Dim Last As Date
First = Range("H4").Value
Last = Range("I4").Value
Sheets("Graph Data").Select
Selection.AutoFilter Field:=1, Criteria1:=">=First", Operator:=xlAnd _
, Criteria2:="
I want to do conditional formatting based on two cell values.
i want to do conditional format the column 'R' based on clolumns 'J' and 'R'.
column 'J' is a text column named PRIORITY which can hold the values P1,P2,P3 an P4.
Column 'R' is nothing but difference of two columns 'M' and 'H'(both are time stamps).Column'R' is in below format.
=TEXT(M4-H4,"h:mm:ss").
column M and H are in below format:
eg: 9/11/13 9:41 AM
Now i want to format the column'R' like
if column J ="P2" and column 'R' > "00:10:00"(10 mins) =it should become red.
if column J="P3" and column 'R'>"00:30:00"(30 mins) = it should become red.