I'm afraid as its a multiple conditional format and thus needs coding. At the moment I'm using the following
Private Sub Worksheet_Change(ByVal Target As Range)
' Conditional Formatting for more than 3 conditions
Dim rng As Range
' Target is a range::therefore,it can be more than one cell
' For example,,someone could delete the contents of a range,
' or someone could enter an array..
Set rng = Intersect(Target, Range("E27:E34,G27:G34,I27:I34,K27:K34,M27:M34,O27:O34,Q27:Q34,S27:S34,U27:U34,W27:W34,Y27:Y34,AA27:AA34"))
If rng Is Nothing Then
This works very nicely, so that for example if I type the number 10 into cell M33, that cells fill colour becomes black (and the text turns white). Alas I would now also like to extend the fill and text colour to the cell one to the left too. To take this example I would type 10 into cell M33 and cells L33 and M33 would both be filled black and their text would be white. I'm not sure if this requires a change to the code, or if its possible to just have a formula or something which copies the fomatting of one cell into another
With the click of a toolbar button, I've got my vba inserting a new tab, renaming it, inserting headers and now working on the code to insert all the formulas needed in 12 columns to copy down as far as there is data.
The 4th column D is the hardest. Currently, I'm using manual "Conditional Formatting" to colorize the cells in Col D but need the VBA to place that "Conditional Formatting" code into the sheet so that when the sheet is created, it will hold the conditional formatting feature.
Specifically, the formulas I'm using in the Conditional format wizard are:
Formula: =$B2$D2 then turn the cell red Applies to: =$D$2:D
Copy down (in other words, the colorizing should work all the way down Column D as long as there is data in Col D.
Is it possible to format a cell based upon the format of another cell? For instance, if the cell to the left of a target cell is bold, is there a conditional formatting cell that can be used so that the target cell is bold as well?
I want to highlight an entire row based on the contents of of a particular cell. For instance, if c4 contains data, highlight the entire row 4. If c5 is blank, do not highlight the entire row 5...and on and on...
i m trying to format a cell so that it colours in red when a specific text is chosen in another cell, ive tried conditional formatting but I cannot get it to work. e.g column A has a drop down list, if GB or IEN is chosen in that cell then cell in column K will become red. (as if these two are chosen then they have to input a number into column K). Once they have inputted the number into column K i want it to go back to its original format. Or if they dont select GB or IEN then it would stay in its original format aswell.
I am working with the Conditional Formatting, which is fine for one cell. Here is what I am trying to do: IF cell in $A1 = 1 then bold $B2:$M2 and apply solid line border to top of cell ranges. I have tried conditional formatting but it only formats the cells in column A. And I can't seem to find a BOLD statement for the cell formulas.
My cell has a 'P' or an 'F' plus some additional text. I'm trying to change cell color based on the 'P' or 'F' but I can't get it to recognize the letters. Samples of what I've tried: =IF(LEFT(L23,1)=P) =IF(MID(L23,1,1)=P) etc.
I can 'FIND' the 'P' or 'F' but there may be a P or F else where in the cell so the color may come up incorrect. I'm trying to get it to just look at the first character in the cell. Can the 'IF' be used with CFs?
I need to make an entire column formatless if the cell in row 3 contains no text. I want the whole column to just appear like a normal formatless column, but if there is text in the row 3 cell, I want it to be the way I have it formatted right now.
I have a large spreadsheet which includes many rows whose number format needs to change depending on the value of a specific cell.
So for example:
If cell B20 has value "A", cells Q20:AG20 should display as 1,234 If cell B20 has value "B", cells Q20:AG20 should display as 5.6% If cell B20 has value "C", cells Q20:AG20 should display as 7.89 Etc...
As conditional formatting does not seem to include a number format option I've worked out that I need some sort of macro to change these settings for me, either automatically whenever the value of B20 changes or, more likely, when I manually choose to run the macro.
conditional format formula that is based on a text range within a cell. In my case, I would like to compare the low and high range when inputted as a number followed by the quotation marks followed by space then hyphen, space then number and ending in quotation marks. The quotation mark is being used to represent inches.
Like this in cell D14: 0.2” - 2.2”
I am using the following condition format formula which works for the strict case above.
HTML =OR(D16<LEFT($D$14,3)+0,D16>MID($D$14,8,3)+0) However, there will be times when users using this spreadsheet may leave out the spaces on either side of the hyphen, or add more than one space between the number and hyphen. Also if additional digits are added, my formula above does not include all the digits in the results. I prefer to leave the quotation marks in...........
1. Where there is data in column B 2. Goto first row of data 2. If column J = "Closed" 3. then select Cells from column B to J in that row and colour these cells in red 4. If column J= "Open" 5. the select Celss from column B to J in that row and colour these cells in grey 4. Repeat for next row until you get to cell in column B where there is no data.
Recieve run time error 1004: Method 'RAnge of object_GLobal failed
=============================================================== Sub Colourclosed() Sheets("Risks").Select Dim LastRow As Long Dim i As Long LastRow = Range("B" & Rows.Count).End(xlUp).Row For i = 8 To LastRow If Range("J" & i).Value = "Closed" Then Range("B", "J" & i).Select Selection.Interior.ColorIndex = 3
Note: I've managed to do it for one cell ie for Column B by replacing "If Range("J" & i).Value = "Closed" Then Range("B", "J" & i).Select with "If Range("J" & i).Value = "Closed" Then Range("B" & i).Select" This works but only colours in cell in column B, how do i do this so it colours range of cells
I have five fields that have a conditional format applied to them: (see attached). Columns J, K, L, N and O. These conditionals highlight if a minimum number is entered. Ex. Minimum pushups for a 30 y/o male is 27, if a 26 is entered it highlights red. The total score (where I need this to perform) is calculated in column Q. It will format red if the total score is below 75 but what I can't figure out is how to make it format if any of the previous minimums have not been met.
Ex. In cell L4, his crunches were 25 (a automatic failure -- red formatting). Now the total score is above 75 so it calculates as passing (green), but I need it to highlight red regardless because of the minimum not met in cell L4.
I want to be able to change the font color of the numbers in a column based on even or odd. I selected the columns and formated them to all be blue... thats the color I want for even, but now I can't figure out how to set a condition that checks for odd numbers and changes them to red. I now have a count of even/odd for all records, and even/odd for the last 30, this provided some very interesting results.
i have a spreadsheet which is used to keep the training records for the company it counts no of staff and their skill levels for different parts of the job, when a person moves to a different branch the skill required changes and they have a set period of time to aquire the new skill.
when the time is up the colour of the old skill is changed to a red font by a conditional format based on the date.this is then counted by a calculation so the team know how many people are to be targeted for extra training.
the problem i have is the calculation will not count conditionally formated cells, so whenever i update the sheet i have to go to each cell with red text and change the font colour manually to red, this sounds really silly and is impossible to explain to anyone who does not understand conditional formatting. i e the people who will end up using the database
what im looking for is a way to count conditionally formatted cells based on the condition being met i.e. they are showing as red font.
I have a row of cells pertaining to jobs B3 across to I3.
In B3, C3, D3, E3 the value entered is text. In F3, G3, H3, I3 the value entered is time.
What I am trying to do is to change the Background colour to Red on cells F3, G3, H3, I3 if either H3 or I3 or are empty at the end of the current day but only if there is some text in any or all of the cells B3 - E3
So for example if H3 or I3 have no time put in them by 23:59 today, when the workbook is opened tomorrow the cells background colour will turn red.
Not sure if this if poossible or not? hopefully I have explained it well enough but if not pease let me know.
I have the following code. I am trying to conditional format a row based on the value of the A column of the row.I have a total of 3 rows. I have to use VBA because in time I may have 4 rows of data. The problem is I after the first do while loop the code stops and the code doesn't proceed to format row 2.
Im having some issues with some code Im working on. My goal is to delete the rows that do not have conditions met. Conditional formatting is used in 6 columns of my spreadsheet and the cell fill is to turn red when below .50 . This code is shown below. What I need to do now is look at the 6 columns where the conditions are applied, and delete any rows where the column cells are not red. To further clarify, if in row 1 column X:X does not meet criteria, but column AL:AL does, the row would not be deleted. However if none of the columns meet the criteria, the entire row is deleted.
I have a spreadsheet with due dates in column X. I want to create conditional formatting so that cells turn red when the due date is less than or equal to 30 days away, but turn gray when the due date has passed.
I've accomplished the first step by using the following: =AND($X6
I have a monthly calender, with each month on its own sheet. I have a sheet named Holidays, which list the holidays. I have been able to use conditional format and highlight the dates in the months the holidays fall on, but I would like to highlight a range of cells below the date on monthly sheet. I have attached a sample of what I have and would like to achieve. I am not much good at using VBA, but would not be against using it either.
I have a spreadsheet that requires me to manually hunt down records that match based on several different criteria. this is very time consuming and inefficient. i would like to find a way to highlight certain records that match based on several different fields. i have posted an example spreadsheet that also has a more detailed description of what i am trying to do; which is located in the second sheet.