Summary of performance of various products against target is as follows,
Product vs Target
Color Code
Result
CH4OH
Green
1.0
[Code] ........
I need the final result automated as follows,
If 2 green of the 4 products, then final result Gree
If 2 Amber of the 4 products, then final result amber
If 2 Red of the 4 products, final result Red
Is there a way to automate this?
I have two columns. In column B is the date of "last check". I column A is the date of "next check". I would like to have cell A2 in yellow color 334 days after the date entered in cell A3 and than in red color 365 days after the date entered in cell A3. Same thing for cell B2 related to date entered in cell B3. Yellow color in cells announces that check will expire within 30 days and red color that check has been expired.
View 1 Replies View Related1 2 3 4 5 6
1
2 x x x x
3 x x
4 x x
5 x x
6 x x
Assume that is the table i have. In row 1 i need conditional formatting such that if any of the columns contain an x the first row should be color coded. In my above example every column in row 1 will be color coded expect for row 1 column 6 since there are no x's for any any row in column 6.
How can i do this in excel.Also instead of x's if i have manually entered color can we do the same ?
Here i want to color my cell based on their dates for example : 01-Jan-2014 to 10-Jan-2014.
For the respective date i want to color my bars from G10 to P10.
I'm trying to get conditional formatting to change the cell color based on a few conditions.
I want the cells in column D to turn red if;
- The number in column B has a match in column A
- And the corresponding cell in column C is not blank
- And the corresponding cell in column D is blank
In the example below, cell D4 should be red
If there's a match (Column B to Column A) and;
- If cell in column C is not blank and cell in column D is not blank, do nothing.
If there's a match (Column B to Column A) and:
- If cell in column C is blank and cell in column D is blank, do nothing.
Here's the formula I attempted but didn't get it to work.
IF(AND(C2"",D2=""),MATCH(B2,$A$2:$A$15,0),IF((AND(C2"",D"")),"",""))
I have a spreadsheet that uses VB macros to calculate sums of cells based on the font color of the numbers inside. It used to be fairly easy going through each cell and "classifying" them by color, so that my macros can go ahead and sum the numbers in each respective color's cell... but now I have a huge amount of numbers and would like to automate the process somewhat. Here's an example using the A and B columns:
flight $400
hotel $150
hotel $130
meal $20
meal $15
flight $350
I tried using conditional formatting to automatically change the color of the adjacent cells based on the presence of a keyword such as "flight" or "hotel", but this change is only cosmetic, and doesn't actually change the font color (it is still the default black, hence why my color-summing macros won't work!).
I'm including a sample macro for what I use to color-sum my cells, but what I am looking to automate the color-coding process based on looking for keywords as explained above in my example. Here is one of the working color-summing macros (for red, in this case) if you'd like to use it as a reference:
Function SumRed(SelectedCells As Range)
' Adds the values of the cells where the font colour is red(3).
Dim Cell As Object
Dim x As Double
[Code] ...........
Via conditional formatting, I am searching to change the color of a specific word in a cell (not the color of everything in the cell, but only that specific word - and the word repeats in the cell). A function such as =isnumber(search("NOK";A1)) colors all the cell values, which I do not want to do. How i can perform this task?
View 1 Replies View RelatedThis is probably elementary, but I'm struggling and would appreciate any help as I have very little excel VBA experience to draw from.
I have assembled code which changes the cell color based on a value change in Column A. Column A will contain many different groups of repeating values. This code works well and and I have been able to figure out how to limit the number of colors to only 2. The end result is each set of similar values in column A is visually grouped by one of two alternating colors.
The number rows in the data set is variable as the data set is extracted from SAP. The number of columns is fixed.
What I want to do now is set the cell color in columns B through F the same color that was assigned to the row in column A. So if cell A3 is set to colorindex = 6, then I want to set the range of cells B3 to E3 to the same color.
Here is the code I am using to set the color of the cells in Column A:
I would like to format the color of cell A1 on Sheet 1 based on true or false values from cell range A1:A10 on sheet 2. For instance:
1. If all cells on sheet 2 in range A1:A10 were false then cell A1 on sheet 1 would be red.
2. If some cells on sheet 2 in the range A1:A10 were false and some were true then cell A1 on sheet 1 would be yellow.
3. If all cells on sheet 2 in range A1:A10 were true then cell A1 on sheet 1 would be green.
I am using the following formula on a conditional formatting to color cell A1 based on cell N5 date =$N5=TODAY()-2
The problem is that I need this formula to consider only weekdays, how can apply formula weekdays to my formula?
I am trying to write a VBA code to color cells.
In Column I
I need a formula to change the color of the cell based upon the following criteria
In cell I3, if J3>7 change color to teal, if H3<$A$1 color cell red, if J3<7 color cell yellow, if J3="COMPLETE" color cell grey, otherwise do nothing.
Is there a way in conditional formatting to have a cell shaded a certain color based on the value of another cell in that same worksheet?
View 10 Replies View RelatedI would like to be able to put a value into a cell. By doing this I would like another cell next to it to turn a color. With that said, is it also possible to format a cell with several possible scenarios in one formula to be able to change the cell next to it a color?? Example is this lets say Cell B1 could have the letters, A B C D or E entered. So that the Cell A1 turns say the color Red.
View 2 Replies View RelatedI have 10 rows of 6 numbers, all between 1 & 49, in the range A1:F10. I also have the range A20:AW20, which are all currently blank cells. When I type a number between 1 and 49 inclusive into the range A20:AW20, any number that matches it in the range A1:F1 I want the cell to fill in colour.
View 1 Replies View RelatedIs it possible to use conditional formatting to to turn a cell red whenever the value in the cell is divisible by 10 ?
View 9 Replies View RelatedHow do I make my cell shade a certain color? For example, green if >90%, yellow if >70% and red if
View 6 Replies View Related Cell B157 is changed by checkbox 1= TRUE, 0 = FALSE
Cell H1 and Cell H2 are percentages changed by the user.
Range(AI8:AQ8,AI12:AQ12,AI16:AQ16,AI20:AQ20, etc) each cell in the range contains a formula, and is protected from the user.
I need the contents of each cell in the range to change font color (independent of each other) when the formula of any of the cells within the range changes - to the following
If B157 = 1
Cells < H1 (a percentage changed by user), would turn Red
Cells > H1 but < H2 (a percentage changed by user) would turn Yellow
Cells > H2 would be Green
If B157 = 0
Cells < H1 (a percentage changed by user), would turn Green
Cells > H1 but < H2 (a percentage changed by user) would turn Yellow
Cells > H2 would be Red
I need it to fire whenever the value of one of the cells in the range changes.
I have tried If statements, Select Case, and a combination of both but just can't get it!
I know how to set a conditional for a cell to change a color when i apply a specific value, but how about if i want to set E2 cell to change to green when i place a 'X' on F2?
Pretty much I want 2 columns that say Yes and the Other No. When i place a X on Yes that other cell turns green, if i place a X on No that other cell turns red.
I would like to know the formula to highlight the color of text in particular cell if the value of the particular cell ( value is text ) is so and so.
For Ex: If the J6 is "Vacation" then the J1 text should be in red color.
I have been trying to make a macro to automatically calculate the quantity I need to increase or decrease our purchase orders.
example.jpg
As the On Hand quantity decreases I have set conditional formatting to determine how much we should order according to a percentage of the Stocking Level and turns the desired cell yellow. For each row the macro would need to identify which cell in columns L through O is yellow from conditional formatting, use that value and subtract the On Order quantity, then put the result in the Adjust PO Qty (+/-) column so I know how much to decrease the order if negative or increase if positive.
I am using excel 2003. I need to conditional formatting for the following:
Based on the column A, if it is USD, the next column show $ and the cell in blue
If it is JPY, the next column show Yuan sign and the cell in green
If it is Euro, the next column show Euro Sign and the cell in yellow.
How to make that happen?
I want every even row that has a value in it to have a different fill color (same color for all). how to do it? I am using 2007.
View 5 Replies View RelatedThis is my problem:
A list with numbers in column A, these numbers can be used over multiple rows, sometimes 3, 5 or more/less.
Every time this number changes, the color for the entire row should flip between yellow and no color.
Sequence of the number in column A is not always odd / even. I tried various suggestions regarding this topic but I do not get it straight.
I have got a userform with lots of controls,
One of the action's on a large group of the controls is the same but except for one number
here is an example
If TextBox107.ForeColor = 255 Then ActiveCell. Offset(0, 53).Font.ColorIndex = 3
If TextBox108.ForeColor = 255 Then ActiveCell.Offset(0, 54).Font.ColorIndex = 3
If TextBox109.ForeColor = 255 Then ActiveCell.Offset(0, 55).Font.ColorIndex = 3
This makes a cell that correlates to the textbox red if the text in the textbox is red.
Now, I loads of these textboxes that all need to run the same code with just the Offset value one digit higher than the last and I was hoping I could create a loop to avoid a huge block of code but I can't work out how to make a constant that will +1 with each loop.
Also, can I assume that a loop will start with the control with the lowest number i.e. Textbox1 and then work its way through the rest of them in order?
I'm trying to discover the best way to accomplish formatting a cell by filling it a certain color based on 2 of 3 criteria of other cells.
Column A has the title of the field. Cells B1:D1 have one of 3 values: Nothing/blank, Complete, or x. If all of the x's are gone within the range of B1:D1, I'd like to automatically format cell A1 to fill in Blue (or any color).
A1__________________B1_________________C1_____________D1
Generic Name______Complete_______________x_____________
If the 'x' in C1 is changed to the value of 'Complete', I'd like A1/Generic Name to be filled in with a color.
My cell has a 'P' or an 'F' plus some additional text. I'm trying to change cell color based on the 'P' or 'F' but I can't get it to recognize the letters.
Samples of what I've tried:
=IF(LEFT(L23,1)=P)
=IF(MID(L23,1,1)=P)
etc.
I can 'FIND' the 'P' or 'F' but there may be a P or F else where in the cell so the color may come up incorrect. I'm trying to get it to just look at the first character in the cell. Can the 'IF' be used with CFs?
Is it possible to write VBA code that will prevent a user from changing a cell's contents, depending on the cell's font color?
More specifically, I have a column of text in range B15:B64. Some of the cells will have a black font, others will be blue. Is it possible to lock the black font cells only, leaving the blue cells unlocked for users to change?
I have two columns. The first one (A) contains cells that have different Fill colors. The second column (B) contains text adjacent to the colored cells. I am trying to change the color of the text in the second column (B) to the corresponding color in the adjacent cell in the first column (A). I don't think conditional formating works well in this situation. I believe the solution would be some sort of macro.
View 3 Replies View RelatedI have various row cells in column (F) filled with the color Green. And corresponding text in Column G. How can I change the text of that particular row to white.
i.e.: if any cell in column F is Green, change the text color of that row in Column G to white?
I am looking for a very simple script that will achieve the following:
On the clicking of a button, Select and shade in a cell yellow, delete the yellow shading of the previous cell. The shading & selection should move up a column of cells, 1 at a time, in the following order:
From B10 to B9, then B9 to B8, B8 to B7 etc until the selection and shading is at B2. Once it is at B2 subsequent clicks will simply keep it at B2 (the top). Thus after 8 clicks the shading & selection should travel from B10 to B2, with only 1 cell being shaded yellow and selected at any one time.
