Conditional Formatting Of Cells Excel 2007 Marks Per Question

Mar 7, 2009

see spreadsheet. columns a-f contain pupils details.g4-r23 contain marks for 12 questions. row 24 contains total marks for that question. questions are out of 2,3,4 and 5 marks. I would like to format the cells to reflect % for that question. At the moment I have to format column by column to do that. When I format the whole spreadsheet 0 and 1 show in red 2 and 3 in yellow and 4 and 5 in red. I want 2 when equalling 100% to show green not yellow.

View 9 Replies


ADVERTISEMENT

Excel 2007 :: Conditional Formatting On Multiple Cells?

Apr 17, 2012

I'm using 2007 and want to add conditional formatting to multiple cells.

Say I have 3 columns and 10 rows of data (A1:10 ; B1:10 ; C1:10). I want to add an icon set to everything in columns B and C based on a comparison with the figure on their immeidate left. So B1 is compared to A1, C1 to B1 etc.

When I do it though it compares everything to A1 (formula in the Conditional Formating is =$A$1 and it won't let me remove the $'s). It looks to me like I can't do it and have to add the formatting to every cell indiviually (which is quite a lot).

View 5 Replies View Related

Excel 2007 :: Conditional Formatting For Cells That Are Activated?

Sep 26, 2013

Is it possible to set a conditional format for the following scenario:

a user clicks on or tabs over to A1 making A1 the "active cell". Once the cell is "active", a message appears in A2?

(Excel 2007)

View 5 Replies View Related

Excel 2007 :: Conditional Formatting Empty Cells Based On Full Cells?

Nov 17, 2011

Working in Excel 2007. I am using excel for a data log (basically) and want it to format all empty cells in a row yellow if there is data in column A

Basically, If i have a value in A2, I want any empty cell between B2-G2 to be filled in yellow (as an idicator to the inputter that the cell needs to be completed).

there is already conditional formatting on these cells, which i want to maintain for the non-empty cells. I also have "0" as a value, so I couldn't use the basic conditional formatting setting it =0, it highlighted cells with $0.00, which i do not want.

View 5 Replies View Related

Excel 2007 :: Conditional Formatting And Counting Coloured Cells?

Nov 1, 2011

i have a spreadsheet in excel 2007. It shows a students target grade in one column and their recent test mark in another column. Firstly i have applied conditional formatting to say whether or not the student has hit their target, below or above, using red, yellow and green colours. This all works fine.

Now i would like to add a formula that counts the number of cells that are red, yellow or green etc.....

View 7 Replies View Related

Excel 2007 :: Count Cells Colored By Conditional Formatting

Oct 30, 2012

I am applying conditional formatting on a range of cells. I have 2 conditions to color cells in different colors. Once I enter data, cells get colored corectly according to conditions. What I want is to count how many cells are colored by conditional formatting.

I tried using VBA --- Evaluate formula for each cell and count if TRUE.

I observed, for Excel 2007, as the condition is applied on the range, I expect the formula to be changed dynamically for each cell with appropriate addresses, like for A1, if am referring to cell C1, for A2 it should automatically refer to C2.

And excel takes care of this cells are colored correctly,however, when I try to check the 'FormatCondition' in VBA, I get only one formula for entire range. SO I can not use evaluate to find if the condition is satisfied or not ?

View 6 Replies View Related

Excel 2007 :: Conditional Formatting And Adding Text To Cell Based On Multiple Cells

May 31, 2013

I'm using Excel 2007. I would prefer to stay away from the scripting side of the house if possible. This is basically a 3 day forcast weather chart. The top is the actual weather data, the bottom portion is a color coded reflection of how the weather affects various things.

This product is created in excel, but will be embedded into a powerpoint. It will be updated daily. Here is what I would like. I want the color chart at the bottom to update automatically based on the data I enter above. I have a grasp that I can update the color through conditional formatting, although im not exactly sure what that will look like with all of those cells.

I also figured out that I can insert the letters in those lower cells with something similar to " =IF(C6>90, "T", "") " which would put in a 'T' for Temperature when the temperature got above a certain degree.

I run into a problem when I have multiple factors affecting a single cell. For instance on the example in day 2 of my image. Personnel are affected by Temperate AND UV Index. How would I set up that cell to pull that information from both of those cells and display it accordingly? I would prefer the letters to stay separated by the comma, but I could live without that. The default cell color will be green, with the potential to be yellow or red. I left a few examples of possible situations on day 2 and 3.

View 3 Replies View Related

Excel 2007 :: Conditional Formatting Not Available?

Sep 20, 2011

I'm trying to clear conditional formatting (icon set) that I was experimenting with, but no joy at all. The only function within the "Styles" section is Cell Styles -- conditional formatting & fornat as table choices are grayed-out.

I've tried to delete and re-enter the data, clear formats, clear all, copy and paste, format painter...nothing worked.

View 4 Replies View Related

Excel 2007 :: Subtotaling Using Conditional Formatting?

Jun 19, 2014

I have data in several columns going left to right. In column N I subtract column H from column I and then in column O I subtract column I from column J. I then use conditional formatting to indicate whether column N is greater than 45 and column O is less than 120, using different formats for each. If the cell value does not meet the condition then there is no conditional formatting used in that cell.

I want to subtotal each column to indicate the amount over or under 45 in column N and over and under 120 in column O and I would like to know if I can do it using the colors in each cell. Most rows do not meet either condition but a few rows do meet both conditions and I don't think sorting and subtotaling is not going to give me what I want.

I have about 7,000 rows in this worksheet and I am going to be removing lines and then maybe adding them back and I would like to track the balances as the data gets moved around. I can use Window Watch for that.

I am using Excel 2007, don't know how to write VBA and would really like a solution that does not use VBA.

View 1 Replies View Related

Excel 2007 :: Find Duplicates With Conditional Formatting

Feb 20, 2012

Using Excel 2007 and conditional formatting, how would I find duplicates across all fields in the table, similar to the "remove duplicates" tool that in default mode selects all the fields or offers the option to select fields of choice. I need to look at all the fields.

I've tried concatenation, but only with a limited number of fields; larger amounts slow the process to a crawl. If my table is 10,000 records with 15 fields, what process would I use to highlight the duplicates. How about something in VBA?

View 3 Replies View Related

Excel 2007 :: Capturing Milestone With Conditional Formatting?

Feb 3, 2014

I wish to create a worksheet which I want to visually show milestone progress via a traffic light system based on dates , however I need a mechanism to lock these cells as each milestone progresses capturing whether it was within a certain SLA or not.

So for instance I have a worksheet as follows:

InceptionDate
MileStone1
MileStoneSLA1
MileStone2
MilestoneSLA2
Milestone3
Milestone3

20/01/2014
2
=today()-B2

View 3 Replies View Related

Excel 2007 :: Custom Icon Sets For Conditional Formatting?

Mar 26, 2010

Any way to import and use icon sets for conditional formatting other than the ones provided in excel 2007? I would like to have some circles and shapes in colors other than just yellow, green, red, and gray.

View 5 Replies View Related

Excel 2007 :: Crashing Using Named Range In Conditional Formatting?

Feb 10, 2014

I have one simple (but large table). It has dates across the top (formatted in hh format). I would like the associated table to format according to the day and also to format differently when there is a public holiday. So I have built a table with the holidays and named the relevant cells as "Holiday_Valid".

I have the following formula in the conditional formatting;

[Code]....

Where D11 has the current day in question and Holiday_Valid is a list of public holidays. Since there is a cell for each hour of each day I am using "int()".

There is a second conditional format to format Sundays differently as below;

[Code] .....

My problem is that these both work well....but then after a few minutes the whole sheet crashes with those dreaded "Trying to recover your data" and "Excel will restart" etc.

I have removed references to named ranges and so far - so good....but this means putting the validation table in the same sheet as the main table. In the past I have been able to use named ranges (albeit not in such convoluted formulae), but now it seems that it is not working any longer.

When I open the recovered sheet, all the conditional formatting has been removed and the message from the repairs is that there was some invalid conditional formatting.

Extensive web searches did show some issues with conditional formatting using names ranges....especially with frozen panes....which I need use with a sheet this big.

View 4 Replies View Related

Excel 2007 :: Conditional Formatting - Assign Each Prg Its Own Color On Total Tab

May 25, 2012

I am trying to create conditional formatting in Excel 2007 that is beyond my abilities.

I have 6 rows. The first row is a sum of all the others. Example here:

prg 1 prg 2 prg 3 prg 4 prg 5
Total
4 1 2
10 10

I would like to assign each prg its own color on the total tab, and if it spans multi programs a separate color all together.

View 1 Replies View Related

Excel 2007 :: Conditional Formatting Based On Two Previous Values

Feb 19, 2013

I'm creating an excel document that tracks the amount of time someone has (in months) in the program. Certain residents are able to 'fast track' if they meet conditions, and I am trying to create this spreadsheet so that anyone who looks at it can tell who qualifies (and when).

The issue I'm having is with conditional formatting, because I don't know how to do it with mutliple conditions.

Column C is their previous time (months) in the program
Column D is their current time (months) in the program
Column E is their total time in the program (Sum C+D)

Coumn E is what I would like to format, based on the following rules set out in the program manual:

If previous time is 9 months or more, a resident is eligible to fast track after 6 months current time (format green).
If previous time is less than 6 months, a resident is eligible to fast track after 9 months current time (format green).

I understand that their is an odd gap - but these are the rules currently set out by the program manual, which is what I have to follow.

I'm using Excel 2007 - if that changes anything.

View 3 Replies View Related

Excel 2007 :: Conditional Formatting To Compare Two Pivot Tables

May 27, 2013

it's possible to set up conditional formatting to compare values between two identically-formatted (i.e. same row and column) pivot tables?

I have two pivots from two different sources and I want to be able to visually identify discrepancies between the two. Both have dates as the row labels (same date range) and categories as column labels (some categories may not necessarily be present on both pivots but the format of the labels - i.e., the names of the categories - is consistent where there is overlap)

I've tried doing this with 'traditional' CF but whenever I manipulate the pivots (i.e. by selecting / deselecting an item in a report filter), the movement of the columns trashes the formatting and I have to set it all up again.

Figured, given the structure of the tables is essentially the same, there might be a smarter way of doing it (by referencing the pivot fields in some way)

View 1 Replies View Related

Excel 2007 :: Row-wise Conditional Formatting On Color Scale

Jan 14, 2014

I need to color format several matrices of about 1000 rows each in order to find a pattern. Each row needs to be formatted on a color-scale so that the maximum value in each row has the darkest color and the minimum value has the lightest, while others are lighter according to their weight. It can be done on a single row, but it does not work for multiple rows at once. I have tried format copying and range options but it takes the maximum and minimum for the whole range rather than individual rows.

I'm wondering if it is possible to do it for multiple rows while the criteria of maximum and minimum applies to individual rows.

View 2 Replies View Related

Conditional Formatting To Format Cells On Several Rows Below According To The Day In 2007

Sep 8, 2009

I´m having aproblem with Excel 2007 about Conditional Formatting. I have a row of Dates for example 02-01-2009 03-01-2009 04-01-2009 , etc in different columns.

Then what I want to do is use Conditional Formatting to Format cells on several rows below according to the day (if its weekend paint red, if not, dont do anything). I'm using the "Use a formula to determine which cells to format" and the condition is (supposing the cells with dates are A1 to C1)
=WEEKDAY(A1:C1) > 5 .

So with those 3 dates provided lets suppose Januar2nd is not a weekday, so the outputIwant is: Red White White, (Next Row) Red White White, etc for several rows.

Now what I think is not right is it only works for the row in which I have the cursor so its like: (Lets imagine I selected 3 rows on which I want to see that output) Red White White (The row in which the cursor is works fine), but the next row goes Red Red Red and the third the same.

View 5 Replies View Related

Excel 2007 :: Applying Conditional Formatting To A Dynamic Named Range?

Jul 10, 2012

I have an Excel 2007 Workbook which is refreshed by a Web Query. I have dynamic named range defined as "Manager" which I've confirmed is correctly identified. This range includes only one column and is formatted as text.

When I try to reference this range in my conditional formatting "refers to" formula, all cells are recognized as blank even though the range clearly contains many cells that are not. For example, there are 90 records containing the initials "PD". If I use the formula =Manager="PD" in my conditional formatting, nothing changes. If I change it to =Manager="" then ALL records are formatted, including those that are not blank.

Stranger still, if I enter the formula =COUNTIF(Manager,"PD") into and empty cell in my worksheet those 90 records are counted correctly. Which leads me to believe it isn't about the data. Conversely, =COUNTIF(Manager,"") returns the correct count of only cells that are, in fact, blank.

I've tried using the OFFSET formula defining my range in place of the name itself for my conditional format formula to no avail.

View 2 Replies View Related

Excel 2007 :: How To Stop Conditional Formatting From Copying To Adjacent Cell

Jun 6, 2012

Excel 2007.

I have conditional formatting set up so that the cell becomes highlighted if it contains a specific text.

Example of wanted conditional formatting:

Conditional formatting rules manager
Rule

Format

Applies to

Stop if true

[Code] ......

For some reason this formatting is inherited by another adjacent cell as we continue to input information.

For example:

Column M is formatted so if 'AP' is placed in any cell in that column the cell fills pink. As more information is inputted into the sheet, the conditional formatting copies to Column N. It does not happen with every entry and I have not been able to isolate the specific steps to recreate the copying. Multiple people use the same sheet and fill it out and needed.

After working with the sheet changes are made to the "applies to" column without people meaning to.

For example:

Conditional formatting rules manager
Rule

Format

Applies to

[Code] .......

I would like to make this formatting so that is only applies to the Column M and not "travel" to other cells of the sheet.

View 2 Replies View Related

Excel 2007 :: Pull Data Into A Cell From Another Worksheet That Has Conditional Formatting?

Jul 20, 2012

I have a Workbook (Test 1) with several columns A-S. I'd like to be able to continue to add data into Test 1, and have some of the data pulled into a new Workbook (Test 2). Basically pulling data from Test 1, cols. D, L, J, E, I, C, K, Q and S - into the new workbook Test 2.

Some of the columns in Test 1 have conditional formatting and data validations, but I need the data in these columns to be replicated into Test 2 - without having to copy/paste between the 2 workbooks.

I figured how to do this in Excel 2010, but my office is still using 2007 and I can't seem to get it to work....

View 1 Replies View Related

Excel 2007 :: Conditional Formatting Dates Based On Number Of Days That Have Passed?

Nov 22, 2011

I am trying to figure-out how to set up conditional formatting of dates in a column (e.g. Date Submitted) and have these dates, and/or cell, change color as time progresses. I have Excel 2007.

For instance I have an application submitted on 11/20/2011 in a cell. I would like to have the date change color (Yellow) after 30 days have passed.

Then do the same except change to Red after 60 days have passed the date.

I searched the forums and did not find this particular problem. I of course may have missed it too...

My guess was to try "$A$1

View 4 Replies View Related

Excel 2007 :: Conditional Formatting Of Numbers Will Not Stay Cleared On Reopening File

Apr 27, 2013

Excel 2007 Conditional Formatting. I am trying to apply conditional formatting to a wide range of cells. I only want the rule to adjust the color and shading, under the FONT tab in the section below. Specifically, I do NOT want to adjust the number format (I have the user select the scaling and use VB to populate the number formatting). I accomplish this by removing the number formatting by going into the conditional formatting rule, clicking on format, and then on the first tab (Number) -- on the bottom right there is button to Clear.

This resolves the issue perfectly, and I can operate the report exactly as I would expect.

Unfortunately, when closing the report (after a save), and then re-opening, the conditional formatting number format is no longer cleared. Worse yet, because it no longer is cleared, the scaling VB doesn't work, unless I go back into conditional formatting rules, and go to the number tab, and click clear.

Screen shot of after re-opening, no changes:

Report looks terrible (not real data):

View 2 Replies View Related

Excel 2007 :: Copying Conditional Format To Multiple Cells

Nov 5, 2013

I'm a 2007 user. I am trying to conditional format a range of F1:J10, where F1 will be conditionally formatted relationally to A1. G1 is relational to B1. H2 relational to C2, etc., all the way down to J10 relational to E10. My conditional format formula in cell F1 is >A1*2 (will format F1 as orange). I want to be able to copy the conditional formatting over so the formula in J10 for example would be: >E10*2 (will format it orange).

I omit the "$" in the conditional format formula in an attempt to prevent it from being absolute. But every time I copy the conditional formatting over to the other cells, the formula within those cells remains identical to the formula in the original cell.

View 6 Replies View Related

Excel 2010 :: Conditional Formatting With Two Conditions In Different Cells?

May 28, 2013

I have two conditions for a cell. One is that it counts the time elapsed in cell M4, (=now()-J4). The other is whether or not we are still waiting for a response (in cell L4, Y or N). What I would like to do is make it so that when we are still waiting for a response the M4 cell is highlighted yellow if more than 3 days and red if more than 6 days, but if cell L4 is changed to "N", then the formatting goes away. II use Excel 2010.

View 1 Replies View Related

Excel 2010 :: Copying Conditional Formatting To Merged Cells

May 2, 2012

I have a workbook containing two worksheets of staff training records.

The first work sheet contains a list of names and the dates they completed various training courses. I have used some simple date based formulas and conditional formatting to colour-code their name depending on whether their earliest retraining due date has passed, is coming up in the next few weeks, or is a long way off. The data is set out alphabetically, one person per row of data.

The second sheet contains the same list of names, but each person's data is split across two consecutive rows. The cells in column A which contain the staff names are merged in pairs so that the name heads both rows of data.

I want the colour coding of the merged name cells in sheet 2 to automatically copy the colour coding applied to the single name cell in sheet 1, but don't know how.

I'm using excel 2010.

View 3 Replies View Related

Excel 2010 :: Conditional Formatting Ignoring Cells With No Data?

Sep 27, 2013

I'm using Excel 2010.

I have created a spreadsheet with 3 month inspection schedules on using the formula below.

=DATE(YEAR(C50),MONTH(C50)+3,DAY(C50))

I then copy this in to a cell where I want the date to appear... and then in to another cell where I want a further 3 month date to appear. Obviously changing the cell reference.

I would like the formula to ignore the very first cell "C50" if there is no date inputted in this cell.

View 2 Replies View Related

Protect Conditional Formatting For Accessible Cells In Protected Excel File?

May 13, 2014

Is there a way to protect the conditional formatting of accessible cells in a protected sheet.

Detail: I have a protected excel sheet. However some of the cells are made accessible so others (my secretary) can fill them up. The accessible cells have conditional formatting which become nonfunctional during pasting from other sources if "special paste" is not used.

View 2 Replies View Related

Excel Live Calendar Conditional Formatting With Multiple Cells In Column

Jul 15, 2013

I have designed a live calendar and am trying to highlight selected dates from a column in the calendar. I am able to select single cell in the column and highlight the date in the calendar, But am unable to select multiple dates in the column and highlight multiple dates in the calendar using conditional formatting.

Eg: calender dates are from B5:H9 and multiple dates are in column J10:J13

J column
--------
J10 7/10/2013
J11 7/20/2013
j14 7/29/2013

View 4 Replies View Related

Excel 2010 :: Counting Cells With Interior Colors Set Via Conditional Formatting

Jan 3, 2014

How to sort out a way to count cells whose fill colors have been set via conditional formatting.

I'm sure that I was once able to use Chip Pearson's CountOfCF function back in the days of Excel 2003, as it worked around the 3 condition limit and used .ColorIndex which assumed that you'd only ever be formatting using the .ColorIndex values of 1 to 56, but I can't seem to be able to get it to work in 2010.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved