I get sent a spreadsheet by one of our partners where the dates look like they are in European date format except thay are actually in American format.
example
01/09/2007 - they mean 9th January 2007 but Excel holds 39326 which is 1st Sept 2007.
I can obviously format them but when I sort the list Excel still reads 1st Sept instead of 9th Jan
There are over a thousand entries so re-typing isn't an option.
there are a multitude of issues with US date formats when you're not in the US but I've run across one that I can't figure out.
I have a source table that has approx 5000 lines on it, everything looks correct and all the dates are in the correct (Australian) format. However when I use it to make a pivot table, any dates that are before the 12/m/yyyy gets changed to the mmddyyyy format in the pivot table only, all the source dates are still correct.
I have US reporting package that e-mails a report, which I then run macros to put extract the required data, and pivot etc...
There can be anwhere between 1 and 15,000 lines of data.
The file is generated as a CSV file, with dates in the first column in the format mm/dd/yyyy. Other header information also has a "/" so it is impossible to do a text to columns.
I need to continue using UK dating format, so cannot change the Excel settings.
Can anyone provide me with VBA code to convert mm/dd/yyyy into dd-mmm-yyyy without it ignoring any dates where the dd is less than 12?
I'm currently running a macro which copies data from one sheet and pastes it to another.
One of the fields on the primary sheet is a date in the english format DD/MM/YY but when it pastes onto the second sheet it becomes a Julian date 39820 instead of 01/07/09, and when this figure is converted back to date format it becomes american format MM/DD/YY
Currently I've set the macro to PasteSpecial xlValue
How can I make it paste into English format?
I'm using excel 2003
I have a csv file which has been output by an American system that I use, the text that is output is one column is as follows:-
6/19/2007 10:24:44 AM
2/20/2007 11:01:37 AM
2/27/2007 8:18:58 AM
I would like to learn a formula which re-arranges the date to a UK format so that I can do more detailed analysis of data. If possible I would like to strip out the time part of the text in one.
Today() provides a dynamic date which always equals the current date - not very useful when dating accounting documents. Is there a function that will allow the use of Today(), at the time of the document creation, but will then freeze the date to the date of creation?
View 5 Replies View RelatedI have a long column of dates YYYYmmdd and I need to be able to convert them to mm/dd/yy so that I can see (for example) 09/18/72 instead of 19720918
View 9 Replies View RelatedI need to convert the following string into Excel dates:
Jan 1, 2009
Jan 12, 2009
Jan 21, 2009
Right clicking it and changing it to date format will not work.
I have tried extracting individual days/months/years out by using Left/MID and Right functions but as you can see, problem lies when there days with single digit or double digits.
Backstory: I am converting PDF documents to Excel files and some of the numbers are being transformed into a wonky date format which to the ***** eye looks semi correct but the underlying value in the formula bar is incorrect. Basically I need to copy and paste the value but when I paste special values it doesnt work. Below is the example
The cell value should be: 9856 When it is converted to excel the value shows 98 5 6 but in the formula bar it shows: 5/6/2098 The cell is formated as: Custom yy m d;@
If I get the value in the cell to read 98 5 6 I can use trim or something to get it down to 9856 but the issue is when I use those functions they return 72446. I guessing this is because they read the formula value not the cell value.
I need to somehow get the value in the formula bar to read 9856.
Is there a way to convert data that has dates to week by week? such was week 1 week 2 week 3 etc....
View 8 Replies View RelatedI have dates being imported (AS TEXT) to excel in various formats and want them all to appear in their cells in the same 8 digit format (MMDDYYYY) so it can be exported to another program
for example:
Single Digit Month and Day
cell A1: 3179 (convert to 03011979)
cell A2: 30179 (convert to 03011979)
cell A3: 030179 (convert to 03011979)
cell A4: 311979 (convert to 03011979)
cell A5: 3011979 (convert to 03011979)
cell A6: 03011979 (already correct)
Single Digit Month and Double Digit Day
cell A7: 52165 (convert to 05211965)
cell A8: 052165 (convert to 05211965)
cell A9: 5211965 (convert to 05211965)
cell A10: 05211965 (already correct)
Double Digit Month and Single Digit Day
cell A11: 12523 (convert to 12051923)
cell A12: 120523 (convert to 12051923)
cell A13: 1251923 (convert to 12051923)
cell A14: 12051923 (already correct)
Double Digit Month and Double Digit Day
cell A15: 112180 (convert to 11211980)
cell A16: 11211980 (already correct)
I require a worksheet function or group of function that will allow me to
convert my dates of format dd/mm/yyyy to Week 1, Week 2, Week 3, Week 4.
converting text strings to dates.
The dates I have imported into a spreadsheet are of the format:
11.05.08
I use code to convert it to this format
11/5/08
But with some of the dates, I get
11/5/2008 whereas with others, I get
11/5/08
However, if I recorded a macro the date format appears as
11/5/2008 for all the dates.
But the code is excatly the same, if I
see below:
My
For Each celld In Range([e1], [a1].End(xlToRight))
If celld.Value Like "*DATE" Then
celld.EntireColumn.Select
On Error Resume Next
Also, how do you convert strings to dates using VBA?
I thought DATEVALUE performed this function but keep getting errors when i try using it.
I'm a moderate user of excel with some experience but need help creating a specific if statment.
I have a column "A" that shows dates formated like this: 060115 (January 15, 2006). Because excel does not recognize this as a valid numerical date I need column B to show what year the date falls under. To complicate it I need it to reflect a seasonal year from April 1 YYYY, to March 31, YYYY.
So here's an example. Say I have a date in column "A" of 050612 (June 12 2005). I need column "B" to look at that date and determine if it's >040105 and <033106 and return a result of "2005". I then need the formula to calculate an answer for up to 5 years worth of returns.
how to set up this type of =IF statement?
I am working on combining several Excel spreadsheets and a report from a different program into one master Excel report. I have a macro built so the report can be compiled efficiently every quarter. However, I have one obstacle to overcome before I reach report programming bliss: The other program's report does not use a date format that Excel can interpret as a date. Excel interprets it as a value.
Specifically, the other program outputs September 3, 2009 as 9032009. It is crucial that the report be arranged in chronological order (time is a separate field). Does anybody know if there is a way to mass convert a bunch of values that look like 9032009 into 9-03-2009?
I have hit an issue when tranfering a string date from VBA to excel, excel thinks the string is US format and swaps around the days and months even though the system and excel are setup for UK date format:
Simple example of the problem:
Sub test()
Dim testy As String
testy = Now
'testy will equal 04/10/2007 17:20
Range("A1").Value = testy
'A1 will equal 10/04/2007 17:20
End Sub
Now I know in this example that if I used DateValue(testy) it would work, but our situation is a bit more complex as we are running this is a loop testy is not always a date.
I need to convert numeric data to proper dates. Example: a cell currently reads 100875 but I need it to display 10/08/1975.
I've already found a VBA script that properly formats new data as you enter it (keying 1298 results in 1/2/1998), and I'm familiar with using =DATE(left,mid,right) to coerce Excel into spitting out a date in a certain format.
The difficulty I'm having is that I need to make existing data display correctly, without adding another column to accommodate reinterpretation of said existing data through a formula. Essentially I'm looking to avoid having to re-key several thousand date entries.
i'd like a formula to change a date to month and year
Column E
11 May 201123 November 201108 July 201103 September 201111 March 201224 December 2011
I've used =Text(e1,"MMM") to pull the month through but would like to include the year too.
I'm having a little problem working with some CSV files that are sent to us by an outside party. There is a field for an invoice number. This number should be a string since it sometimes has alpha characters and sometimes has dashes. But the field is not delimited to indicate this, so when opening these files in Excel, Excel will sometimes convert the numbers to dates. Once they are converted to dates, there is no going back.
The way we have gotten around this is to change the csv extension to txt, then open as a txt file and convert that particular column to a text column. This causes a lot of additional work as the file ultimately needs to be converted back to a CSV.
Ideally, the people creating the CSV files should create them so the invoices column is properly delimited. But that doesn't seem to be possible right now.
Is there a way to create a macro that would make the modification while opening the CSV file, before Excel has a chance to modify those fields?
I have looked at some threads related to this issue but don't quite fit what I am on about. I access some data online that appears in a grid format which I copy and paste to Excel. I don't have access to the source data/database. I select and set some query variables and run the query and the result appears in the grid. I copy and paste to Excel that is it. When paste to Excel 2010 I have the choice between "Keep source formatting" and "Match destination formatting". OK, I always choose the 2nd option i.e. "Match destination formatting". That is it. It appears to be a simpler format. Where does the problem come in? Can you help me stop Excel from involuntarily converting numerics to dates when not asked?
The data itself can (at least the part that I'm interested in can) come in 2 different ways. 1) WPS or 2) W%P%S. In case you're interested these represent racing statistics where 1) WPS = Number of Wins, Places, Starts given as whole integer format and 2) W%P%S = Percentage of Wins, Percentage of Places and S is still the integer number of starts. Now, when I run the query and copy these statistics over to Excel, particularly in the form of the 1st type of data i.e. WPS they are in the form e.g. "2-6-12" which means 2 wins, 6 places from 12 starts. The stats literally come across in the form "W-P-S" where I fear the delimiter "-" is causing the date conversion consequences that I have outlined at the start. ALSO, as you could have imagined, I have tried importing the data in terms of the 2nd type of data namely "W%-P%-S", which, on the surface of things begins to solve the problem in terms of the initial paste of the data into Excel. That is true, and yes I have found that this has delimited the data correctly mainly. Although there are still occasional problems. When I import the data this way, I still want the data in the % form as well as the integer form. So I do a great deal of data massaging with what I have and yet in re-converting some of the data back to integer form I can still encounter the "convert to date" problem.
http://www.excelforum.com/excel-gene...cognition.html
and im copying and pasting data from a website ( football scores )
and when i get what should be 1-1 it returns 01-jan and this i dont want
i have tried formatting all cells to text beforehand but that makes no difference and i cant put an apostrophe before each one as that would take ages
wondered if anyone could work out some syntax to use as a macro button?
claymation had a go but it doesnt work.
I have a list of dates and want to convert them to something like Monday 21st October instead of 21/10/13.
I am sure this is easy but cannot see how to do it. I am on Excel 13.
I have an excel document saved in a SharePoint document library. I then have another excel document where I created a connection back to the document being saved on SP (went to data connections->add->browse for more->enter the SP URL & found the document) and then opened that connection up as its own worksheet (existing connections->chose my connection). In the original worksheet (saved on SP), there are about 20 columns that are formatted as numbers. However, when I open the connection up in the new document, half of these columns are still number formatted, but the rest are being displayed as text EVEN THOUGH they are technically formatted as numbers (I right click->format cells & they are formatted as numbers). I can click into a cell and press enter and it will "come up to speed" and enter into number formatting, but as soon as I refresh my connection back to the original document, they go back to their text formatting despite the fact that the connection they are drawing from has them saved as numbers! Very frustrating. Its not a SP issue because I recreated the scenario by saving the original document to my computer and it did the same thing. I even went through one column in the original document and made sure there were no spaces saved to trigger the column to go to text- nothing.
View 2 Replies View RelatedI have column A set up to display dates in the following format: 03/04/2009. While the "look" is fine for the values in the column, I cannot get it to stay in that format when it is moved to a text file. It simply converts the display back to 39876.
I would like a macro that 1) looks at all values in column A and 2) converts each cell in the column to text format but leaves the contents so they are dates 03/04/2009 (mm,dd,yyyy).
I have excel 2007 and how to do a text split. For example, in A1 I have : Name American Company AP Code PI Due $0.00
Is there anyway to do a text split in B1 to just have:
American Company
Got a random problem with the IsDate function and was wondering if anybody could help?
Below is the code I am using to check a user input of a date, and if it is a recognised date put it in to a standard format (dd/mm/yyyy). The problem is that VBA is checking for an American ...
I have column with thousand of line with european currency sign at the end. The excel wont add em cuz these sign are not $ sign. How can I eliminate the sign at the end so that I able to add up?
View 9 Replies View Relatedare there any easy way to reformat a fractional number: I need, for example, to make 5,23 look 5.23. Is there any function in Excel? I guess not, but have no clue where to start my VBA code.
View 6 Replies View RelatedAn in-house server spits out a whole lot of dates which I put into Excel and then use the dates for analysis (VBA code). The problem is that Excel is getting confused about the date formats. Sometimes the dates are formatted as dd/mm/yyyy and then the next line can randomly be mm/dd/yyyy. This totally messes up all changes of having data integrity.
View 5 Replies View RelatedI have a userform which is used to update a spreadsheet.
There are 7 textboxes which add dates to the spreadsheet. These dates are then used in formulas.
Every time a record is saved the date format changes.
Ths means that if the date is entered dd/mm/yyyy it writes mm/dd/yyyy and this is fine. When this record is next retrieved it will show mm/dd/yyyy and any new date will be dd/mm/yyyy.
Wen saved to the spreadsheet both formats change meaning the dates in the spreadsheet appear in diffrent formats messing up all formulas.
How can I stop the date format changing each time the record is saved?