I am trying to use a pivot table to analyse some data. The base contains a "day" date..ie 01/05/08, however I want the pivot table to summarise by the month..ie May 08. I have used the "=month(cellref) command, and it returns the correct month number. However when I try and format this to "mmm" or "mmm yr" to get a month I can then cut and paste, it always retunrs the month of JAN.
I have created a time sheet in excel (see attached) that will be part of the larger workbook that will be linked with other sheets to auto fill in most fields. I am wondering if there is a way for an user to enter a Month and a Year at the top of the page and that in turn automatically fills in the days of the month by week.
So in attached sheet there are 5 boxes representing 5 weeks in a month. So if we used May 2014 as an example I would like to know if there is a way that once May 2014 is entered in up to top that. Excel fills in the dates in Week #1 with under Thursday showing 1st, under Friday showing 2nd as on for the entire month...
So as the month go by all user has to do is state the month and year and excel fills in the weekly dates for each day in month.
... in A1 a year (say 2012) ... in A2 a month, formatting as "MMM" (JAN, FEB, MAR etc.)
How to automatically get in column A (say from A3) all the dates of the month entered, formatting as "D/M/YYYY" (e.g. 1/1/2012, 2/1/2012/ 3/1/2012, etc.)?
I have a range of dates from 2003 to 2012. I formatted them to the 'Mar-01' option, but when I want to pivot on the month, Excel still reads them as the date - example 3/25/2008, 3/28/2008...and so my pivot table has multiple columns for all of the dates present in that month.
How do I truly format my dates so that excel reads them as the month only so that I can then pivot and show 12 columns (months) per year?
I am trying to calculate the number of days it takes to complete a project when the project ends in a specific month. If it is July 2007 I want the number of days for each project completed in July 2007. The number of days is not the problem it is reflecting the number when a project takes longer than one month to complete. To add to things the users sometimes have "open" or "00/00/00" in E (for never close).
I have a spreadsheet with dates a project begins in column D and dates the project ends in column E and a start and end date for each month going across rows 1 and 2. When the project starts and ends in the same month life is good and my original formal of greater than and less than the dates (courtesy of this website) is effective. I tried the following formula in F34. Each piece of the formula worked but when I combined it I either broke it or have too many nested formulas.
I created a work around by putting formulas in B and C and row 3 that would answer some of the nested if and working off the results. I was hoping someone might be able to help me make this a little more effecient.
If I have a date which is 03/09/2006. How can I create a formulae to abbreviate this. Ie to return 09/2006 (I am english so we have the DD and MM the other way round to you guys in the states).
In other words if an event happens on the third of september 2006 I want a column which classifies that event as september 2006 with NO reference to the day.
Attached spreadsheet has the resource names and their date of joinings (Column - F2), now I would like group the date of joinings into Month & Year format. I tried text formula and then converted it back to date format but its giving incorrect results. For ex - Column F2 has 9th Sep -2013, whereas my formula in H2 is showing Sep-2014. Any way to group these dates into months in a simpler way?
Once I have this grouping done, I would like to do a pivot and sort them.
I have the below find and replace code that is now working. I double checked the syntax and can't find a reason why. The errors I get are Overflow and 400.
'format column with custom date format. Public Sub formatDate() Dim charHold As Date What = m / d / yyyy repl = yyyymd Cells.Replace What:=What, Replacement:=repl, LookAt:=xlPart, _ SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _ ReplaceFormat:=False End Sub
I am trying to count dates from a list using sum product (I found the formula via google) I have plugged it into my spreadsheet but it does not seem to be calculating correctly.
I have attached the spreadsheet too : sumproduct_Error.xlsx
I have a data chart that lists dates in various types of formats, for example:
1/1/10 1/1/09 Jan Jan '10 Jan/Feb '10 Jan/Feb
I'm trying to figure out a formula that will just pull the month and year no matter what format the dates are in. Based on the above I'm looking for the following results:
1/1/10: Jan 10 1/1/09: Jan 09 Jan: Jan 09 Jan '10: Jan 10 Jan/Feb '10: Jan 10 Jan/Feb: Jan 09
This data is for the entire year so the same applies for all months.
=> and for my ms excel has its columns (year,month,date) in this if i input the date that is base in the database range from StartDate TO its EndDate will automatically put the month and year which base also in my database (year,MonthNum)
HERE:
A1 B1 C1 Year Month Date A2=2014 B2=January C2=01/01/2014
In attached sheet, I am trying to find total cost by month only for year 2009. Currently formula I have in Cell c24, is {=SUM(IF(MONTH(B2:B9)=1,D2:D9,0))} But this calculates for all years, not just 2009. How do I modify above formula, so for each month, it shows total cost but only for 2009?
I want to use a COUNTIF to return the sum of all the dates that fall within a given month/year. For example: E1 Contains the date July-2009
Column A has date entries such as July 3, 2009, July 18, 2009, August 4 2009. In F1 I want to return the sum of all dates that fall within the month of E1.
I want to create a monthly timesheet which contains 9 columns for (Date, Day, Project no., Activity, Time In, Time Out, Total Hours, OT Hours, Remarks)
I have used IF Function to calculate Total Hours & OT hours automatically. Time IN & Time OUT, Project No., will be entered manually on daily basis.
Weekday function is used in the Day column to return the corresponding day of the date in the Date column.
Name of the Month and Year will be manually entered in the designated cells I3 and I4 respectively.
Now the solution I am looking for is, the dates should be automatically entered in the Date column (in cells A8 to A38) based on the Month & Year entered in cells I3 & I4. Dates of the corresponding month of the year should only be filled in. (If a month is not having 29, 30 or 31st day, the corresponding cells should be left blank. i.e. nothing should be displayed in the corresponding cells). I am looking for some sort of formula to enter in the cells of Date column (A8 to A38) achieve this. I have searched the forum and could not find anything which could at least give me an idea about the kind of function or formula to be used.
Attached here is the time sheet I am trying to create.
I have two combo boxes: One for entering the Year, and one for the month. I can produce a message if the user leaves either box blank but I want a message to apear it the user selects a year AND month less than the current year (iYear) and current month (iMonth). I therefore need an AND statement between the two criteria but i dont know how to do it.
'....First Checks the Comboboxes arent blank then below Checks a future month/year secection is chosen
ElseIf YearBox.Value = iYear & iMonthbox < iMonth Then MsgBox ("You may not enter Data before the current Month") Else '...... Run main code here
I am working on a budget for myself and want it to have running dates so the first data column will have the current month. I was able to succeed with this using the EOMONTH function followed by EDATE functions in the following cells, I then have these columns filled using a nested VLOOKUP MATCH function pair.
The problem I run into is with the months that extend into the next year, in my data table I have month by month listed started on 01/01/2014 ending 12/01/2014 but as soon as the month is no longer January the last column in my budget cannot find the information needed due to it looking for 2015. so what I would like to know is if there is a way to make the data table change the year to the following year after today is beyond that month, so for example on March 1 2014 both January and February would be changed to 2015.
I have dates in my column “A”, for example (A1 cell =22-Mar-1971), (A2 cell=30-Dec-1965). Now my requirement is in B column date and month from A column and year should take current year. Output in B column (B1 cell =22-Mar-2009), (B2 cell=30-Dec-2009)
Need to create year to date sales comparing 4 years month by month. Stacked chart (Excel 2010) works OK for the first three months but adding the fourth month changes the chart to 4 series with a monthly axis. To put it another way I need a vertical axis of years and a horizontal axis of $$$ with each months sales of each year stacked on its year.
I am trying to auto generate a calendar based on two drop down menus - Month and Year.
Once the month and year is selected I want to import all work orders onto the calendar based first on the "Labor Name" found in the list of work tab, then assign each work order for that labor name to the respective date on the calendar for the month.
This is for a report and on "Summary Worksheet" I want to post "Current Payment" totals IF the invoices from "Tab 3" equal the "month" in G6. Say the report is for January - if there are invoices on Tab 3 -worksheet with a January date I want to post all invoice amounts on Summary worksheet under current payment.
Is there a way to make the attached worksheet automatically shade out all the Saturdays & Sundays in any given month everytime you change the Month/Year cell at the top of the worksheet, as example? I've tried using the weekday/Weekend formula, but can't quite get it right.