Select Method Of Range Class Failed "Select Method Of Range Class Failed"
May 22, 2009
I m trying to use some simple macro recording for a command button click. I keep getting the "Select method of range class failed" error from the following code.
From reading the forum it seems to be a common mistake by newbies, couldnt work it out for myself though...my command button is located on a different sheet to where the select function must work...from the code you can see that there are around 20 sheets that need to be used from the one command button...
Private Sub CommandButton1_Click()
Sheets("Treviso").Activate
Range("G21:T21").Select
Selection.ClearContents
Range("G39:T39").Select
Selection.ClearContents
Range("G61:T61").Select
Selection.ClearContents
Range("G77:T77").Select
Selection.ClearContents.....
View 3 Replies
ADVERTISEMENT
Oct 28, 2008
My workbook holds a month template and sheets for each month. I work on modifications in the template ,but would then like to update all the monthly worksheets. I recorded a macro to show me how to start programming the vb sub, but get a runtime failure 'error 1004 Select method of range class failed' when trying to select the column to copy,
View 4 Replies
View Related
Oct 31, 2007
I have created a spreadsheet that is 38mb and needed to size it down. I recorded the following macro to do this. This essentialy jut copies the top line of the relevant columns on each page and then copies the formulas down, calculates, and then pastes just the values of these calculations, thereby reducing the sheet to a third of its size. The macro works if I run it from the macro option on the toolbar, but when I assign it to a command button I keep getting ' select method
View 13 Replies
View Related
Oct 7, 2003
When the public routine ChangeColours is called from a Command button called ButtonX on SheetX it works fine. But a command button called ButtonY on SheetY cannot run it. When ButtonY is clicked, the error is at the line :
Sheets("SheetX").Cells(4,5).Select
Where it says that "Select Method of Range class failed"
Private Sub ButtonX_Click()
Call ChangeColours(0)
End Sub
Private Sub ButtonY_Click()
Call ChangeColours(0)
End Sub...............
View 9 Replies
View Related
Mar 10, 2007
I'm getting "1004 select method of range class failed" on the Range statement below. This code is preceded by a number of range selection and formula-setting statements, nothing unusual.
Worksheets("summary").Select
Range("B5").Select
View 13 Replies
View Related
Oct 22, 2008
I have a macro that opens a specified woorkbook that changes every month. There are formulas which are pasted to range I1 of the new workbook to calculate the totals on this sheet. Everytime i run the code though, I get an error that says "Select method of range class failed" and Range("I1").Select is apparently the error.
View 7 Replies
View Related
Jan 27, 2013
Why I'm getting the above error when I try to copy and sort data into a workbook?
I'm using this:
Code:
Sub GetData1()
Dim SaveDriveDir As String, MyPath As String
Dim FName As Variant
SaveDriveDir = CurDir
MyPath = Application.DefaultFilePath 'or use "C:Data"
[Code] .......
To import the data and then these lines to copy the unique records to a range:
Code:
Sheet33.Range("C1").Select
Sheet33.Range("C1:C1000").AdvancedFilter Action:=xlFilterCopy,
CopyToRange:=Sheet33.Range("S1"), Unique:=True
But the above lines are highlighted when I get the error.
View 1 Replies
View Related
Sep 6, 2013
I am trying to copy set of values in a particular row as per the condition (Value in cell (1,2) = -40). find the code below:
Sub Mohan()
Dim Row As Integer
Sheet1.Activate
[Code]....
View 6 Replies
View Related
Jul 23, 2014
Macro has been working fine for ages suddenly have received this consistently?
It's not debugging to allow me to see the route of the problem.
i've googled and seen it's normally a use of select but can't see any issue in my code or understand why it would work for months and now stop.
note: also after i click Ok on the error the macro seems to continue running and data is pulled through. ...but this message comes up every time so it's questioning the reliability of the data it's pulling.
View 4 Replies
View Related
Aug 22, 2012
When I try to run following code, I get error
Run-time error '1004': Select method of Range class failed
Workbooks("Book1").Worsheets("Sheet1").Range("A1").select
however if I split the code like below it works perfectly
Workbooks("Book1").Worsheets("Sheet1").Select
Range("A1").select
View 3 Replies
View Related
Oct 11, 2012
I have used the macro recorder to generate the select range and clear part of the following macro.
Private Sub CommandButton2_Click()
Dim test As Worksheet
Sheets("Industry").Copy After:=Sheets(Sheets.Count)
[Code]....
I get the runtime error 1004 - Select method of range class failed.
I have used similar script in other macros without error.
View 2 Replies
View Related
Jul 28, 2006
I have a userform that allows the user to view, modify or delete individual records (rows) of a worksheet in a workbook. If a particular item in a record is modified, a check occurs to ensure that the values for that item remain unique. All of that works exactly the way I need. The breakdown occurs when the records are then autosorted by a the values in a particular column. After the autosort, another column of values is copied and pasted to a different worksheet within the same workbook. For this to work properly, I must have the userform open along with the worksheet containing the records. If the userform is open with any other worksheet open, I get the following VBA error message "Run-time Error '1004' : Slect method of Range class failed". I need to be able to open the userform with any worksheet active and not experience this error when the autosort, copy/paste occurs. This is the code for the user form, the module for autosort, copy/paste and checking for unue values.
This is the sub in the worksheet with the records
'This checks for unique values
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim LLoop As Integer
Dim LTestLoop As Integer
Dim Lrows As Integer
Dim LRange As String
Dim LChangedValue As String
Dim LTestValue As String
Dim smessage As String
'Test first 7 rows in spreadsheet for uniqueness
Lrows = 8
LLoop = 2
'Check first 7 rows in spreadsheet
While LLoop <= Lrows.........................
View 3 Replies
View Related
Apr 7, 2007
I get the following error: Run-time error '1004': Select method of Range class failed at the following code line:
Worksheets("Sheet1").Range("A6").Select
View 4 Replies
View Related
Jul 23, 2008
I have this:
Private Sub CommandButton1_Click()
Worksheets("Sheet1").Activate
Range("A1").Select
Selection.End(xlDown).Select
ActiveCell.Offset(rowOffset:=1, columnOffset:=0).Activate
ActiveCell.PasteSpecial
End Sub
it errors to: SELECT METHOD OR RANGE CLASS FAILED
View 9 Replies
View Related
Aug 19, 2009
Newcomer to Excel 2007 but long time programmer for Excel 2003. I am having problems with code that I feel should work. Code fails at the Select command with a "Run-time error '1004': Select method of Range class failed:
View 3 Replies
View Related
Sep 1, 2006
this is some real simple code but for some unkown reason it keeps failing on me..
Sheets("All Work").Select
Cells.Select
Selection.Copy
Sheets("Sheet3").Select
Cells.Select
ActiveSheet.Paste
Sheets("All Work").Select
The second Cells . select doesnt work for some reason when i attach it to a button on the work sheet and i get the message
"runtime error "1004"
select method of range class failed"
but when i run just the macro it all goes smooth.
View 6 Replies
View Related
Nov 17, 2008
I have all sheets selected:
Dim ws As Worksheet
For Each ws In Sheets
If ws.Visible Then ws.Select (False)
Next
' The thing is that i now want to ungroup or select the first worksheet
Sheets(1).Select ?
And then run the same sub on all the worksheets by this:
Dim wSheet As Worksheet
For Each wSheet In Worksheets
Next wSheet
Debug error is:
Select method of worksheet class failed: Sheets(1).Select ?
View 9 Replies
View Related
Sep 17, 2012
I am getting this error when trying to generate the link report ....
Debug tells me that this makes reference to a sheet is not there , I have checked and it seems to be present
It is an urgent issue as it is preventing me to generate link reports...
View 9 Replies
View Related
Sep 26, 2013
My excel version is 2007 and i am on WIN7 64bit
I have a workbook with VBA which was working fine earlier. Lately i have been getting
"Runtime error 1004" Select method of button class failed.
I am adding buttons dynamically in a loop in a sheet and what surprise me is , i go to debug mode when error pops up and it points to below line
MySheet.Buttons.Add(ActiveCell.Left - 5, 25, 20).Select
but my code is running in a loop and i can see that atleast 20 buttons were added and it fails to select when it try to add this iteration. It is completely confusing me.
My entire below code is in a loop
Code:
maWrk.Cells(xIt1, yIt2).Select
mySheet.Buttons.Add(ActiveCell.Left - 5, 25, 20).Select
Selection.OnAction = "callMe"
[Code]....
I also notice that when it fails, on select method .. the button was actually added to the sheet with caption/name as "Button 65536" but then fails to select it. What makes the select to fail after adding the button? Could there be anything special with Button 65536?
Is there any better way to code the adding button and setting action and name for excel 2007?
note before entering the loop i am deleting all the shapes with myShape.Delete which name matches "btRun"
I also want to highlight that i don't have 65536 rows in my sheet. I just have 200 rows. and when this error happens it is on row 150 so firstly i wonder why it is naming the button as Button 65536. I would assume it will start with 1 and go on increments.
What makes excel to fail to select an added button in VBA?
View 6 Replies
View Related
Aug 29, 2002
i just figured out that when you change sheets too often in VBA and get an "Activate Method Of Range Class Failed" or a "Select Method Of Range Class Failed" etc, simply retype the sheets command before it
for example :
Sheets("Work1").Select
Range("A1:D50").Select
OR
Sheets(Work1").Range("A1:D50").Select
this code in VBA, if used too often or the mentioned sheet is not the currently selected sheet in a Sub, will cause errors, and to correct this, simply type
Sheets("Work1").Select
Sheets("Work1").Range("A1:D50").Select
this makes sure that the sheet is selected before running any other range/sheet type commands.
View 2 Replies
View Related
Dec 29, 2011
I try to copy some cells from one workbook to another but keep getting the error message "paste method o range class failed."
I tried different ways to paste, such as
range("D157").PasteSpecial Paste:=xlPasteValues
or
range("D157","D330).PasteSpecial Paste:=xlPasteValues
and got the same result.
-----------------------------------------------------------
If Dir(sourcePath & Format(voucherDate - 1, "dd/mm/yyyy") & ".xlsm") "" Then
Workbooks.Open Filename:=sourcePath & Format(voucherDate-1, "dd/mm/yyyy") & ".xlsm"
Range("H157", "H330").Copy
ActiveWorkbook.Close
Cells(157, 4).PasteSpecial Paste:=xlPasteValues
View 7 Replies
View Related
Mar 7, 2014
So below is the VBA ....
Sub quicker_Option()
Dim toDel(), i As Long
Dim RNG As Range, Cell As Long
Set RNG = Range("d2:d2500")
For Cell = 1 To RNG.Cells.Count
If Application.CountIf(RNG, RNG(Cell)) > 1 Then
[Code] .......
This is the line to debug it says
Range(toDel(i)).EntireRow.Copy ("Sheet2")
View 2 Replies
View Related
Apr 2, 2014
Code is attempting to autofilter any rows where text does not contain "0200" as indicated below, and delete all those rows. When reaching the line of code below the macro bombs and I get a "AutoFilter method of Range class failed" error message. Why that line is not being recognized.
Const strTOFIND As String = "0200"
Dim lngLastRow As Long
Dim rngToCheck As Range
'Application.ScreenUpdating = False
With Sheets("Platform")
[Code] ........
View 2 Replies
View Related
Jan 20, 2009
Set rngData = wksData.UsedRange
With rngData
' clear existing filter
.AutoFilter
' filter on Owner col F
.AutoFilter field:=6, Criteria1:=varOwner
' check for count > 1 since heading row should always be visible
If .Columns(1).SpecialCells(xlCellTypeVisible).count > 1 Then
.SpecialCells(xlCellTypeVisible).Copy rngOutput
End If
'clear filter
.AutoFilter
End With
Set rngOutput = wksSell.Range("A1")
It fails on the line highlighted in red, and from searches on this forum and google I think I need to specify more exactly which sheet it is. something like wksdata.SpecialCells.... but this doesn't work.
View 9 Replies
View Related
Oct 3, 2007
I have written some code to move data from one sheet to another. Since the from sheet has formulas, I use the PasteSpecial command. I have used code like this for years, and all the sudden, this starts breaking. And, here is the fun part, I run the code and it works sometimes. I never know when it will fail. It is so random. This is killing me. I have tried to create objRange object and assign them and it works sometime and fails others. Also, I tried adding the line Worksheets("Daily Dashboard"). Range ("C72").Select before the first PasteSpecial as to select the cell first before pasting. Then I get the "Select method of range class failed".
Lastly, I tried copying the code from behind a worksheet into a new module. The code is triggered by a button on the first worksheet. Still fails.
Private Sub cmdGetData_Click()
[Result1].Value = ""
Application.ScreenUpdating = False
Application.Calculation = xlCalculationManual
Worksheets("Calculation Sheet").Range("A39:A62").Copy
Worksheets("Daily Dashboard").Range("C72").PasteSpecial xlPasteValues
Worksheets("Calculation Sheet").Range("C39:C62").Copy
Worksheets("Daily Dashboard").Range("E72").PasteSpecial xlPasteValues
[Result1].Value = "Complete"
Application.Calculation = xlCalculationAutomatic
Sheets("Control Panel").Select
Application.ScreenUpdating = True
End Sub
View 7 Replies
View Related
Apr 12, 2007
Check Personnel Number in Data Tab with Personnel Numbers in Insert Tab. If they match copy that row from Insert Tab and paste it into the next available row in the Moves Tab.
Column Descriptions: Name, Age, Phone Number, Personnel Number, Notes
Worsheet Tabs: Data, Insert, Moves ....
View 9 Replies
View Related
May 5, 2008
I found the following for something that I was searching for on the web.
Selection.Columns.PasteSpecial Paste:=8
My question is two fold, 1) What does the '8' mean? 2) Is there someplace that tells me what other numbers for PasteSpecial mean?
This solved a problem that I had when trying to do a PasteSpecial for Column Width. What I had been trying was the following:
Selection.PasteSpecial Paste:=xlColumnWidths, Operation:=xlNone, _
SkipBlanks:=False, Transpose:=False
But I would get the error run time error '1004', PasteSpecial method of Range class failed.
View 9 Replies
View Related
Jul 8, 2006
I encounter error 1004 and copy method of range class failed in this VB routine:
fltPreviousValue = Range(varPreviousCell).Value
fltCurrentValue = Range(varCurrentCell).Value
fltNextValue = Range(varNextCell).Value
Range(varCurrentCell).Activate
If fltCurrentValue = RangeMax(ActiveCell.Offset(-2, 0), ActiveCell.Offset(2, 0)) And _
Range(varPreviousCell).Value < Range(varCurrentCell).Value And _
Range(varCurrentCell).Value >= Range(varNextCell).Value Then
Range(varCurrentCell).Select
Selection.Copy (ActiveCell.Offset(0, 6))
I am using Excel 2000 and the error occured at the last command, the bolded one.
View 9 Replies
View Related
Jan 29, 2014
This script is resulting in:
Run-time error '1004'
PasteSpecial method of Range class failed.
[Code] .....
It highlights
[Select Code] .....
when I hit debug.
View 2 Replies
View Related
Feb 9, 2012
I'm attempting to write an OutLook 2007 macro that extracts excel spreadsheets from incoming email and saves them as a .csv file. Before saving the file I need to delete the header row. I am getting a "Error 1004 - Delete method of range class failed" error when running this code.
Here is the code: (the bolded line is where I'm getting the error)
Public Sub ConvertToCsv2()
Dim xls As Excel.Application
Dim oWB As Excel.Workbook
Dim tmp As String
Dim ws As Excel.Worksheet
[code]....
View 7 Replies
View Related
