I have a macro that opens a specified woorkbook that changes every month. There are formulas which are pasted to range I1 of the new workbook to calculate the totals on this sheet. Everytime i run the code though, I get an error that says "Select method of range class failed" and Range("I1").Select is apparently the error.
View 7 Replies
My workbook holds a month template and sheets for each month. I work on modifications in the template ,but would then like to update all the monthly worksheets. I recorded a macro to show me how to start programming the vb sub, but get a runtime failure 'error 1004 Select method of range class failed' when trying to select the column to copy,
View 4 Replies View RelatedWhy I'm getting the above error when I try to copy and sort data into a workbook?
I'm using this:
Code:
Sub GetData1()
Dim SaveDriveDir As String, MyPath As String
Dim FName As Variant
SaveDriveDir = CurDir
MyPath = Application.DefaultFilePath 'or use "C:Data"
[Code] .......
To import the data and then these lines to copy the unique records to a range:
Code:
Sheet33.Range("C1").Select
Sheet33.Range("C1:C1000").AdvancedFilter Action:=xlFilterCopy,
CopyToRange:=Sheet33.Range("S1"), Unique:=True
But the above lines are highlighted when I get the error.
Macro has been working fine for ages suddenly have received this consistently?
It's not debugging to allow me to see the route of the problem.
i've googled and seen it's normally a use of select but can't see any issue in my code or understand why it would work for months and now stop.
note: also after i click Ok on the error the macro seems to continue running and data is pulled through. ...but this message comes up every time so it's questioning the reliability of the data it's pulling.
When I try to run following code, I get error
Run-time error '1004': Select method of Range class failed
Workbooks("Book1").Worsheets("Sheet1").Range("A1").select
however if I split the code like below it works perfectly
Workbooks("Book1").Worsheets("Sheet1").Select
Range("A1").select
I have a userform that allows the user to view, modify or delete individual records (rows) of a worksheet in a workbook. If a particular item in a record is modified, a check occurs to ensure that the values for that item remain unique. All of that works exactly the way I need. The breakdown occurs when the records are then autosorted by a the values in a particular column. After the autosort, another column of values is copied and pasted to a different worksheet within the same workbook. For this to work properly, I must have the userform open along with the worksheet containing the records. If the userform is open with any other worksheet open, I get the following VBA error message "Run-time Error '1004' : Slect method of Range class failed". I need to be able to open the userform with any worksheet active and not experience this error when the autosort, copy/paste occurs. This is the code for the user form, the module for autosort, copy/paste and checking for unue values.
This is the sub in the worksheet with the records
'This checks for unique values
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim LLoop As Integer
Dim LTestLoop As Integer
Dim Lrows As Integer
Dim LRange As String
Dim LChangedValue As String
Dim LTestValue As String
Dim smessage As String
'Test first 7 rows in spreadsheet for uniqueness
Lrows = 8
LLoop = 2
'Check first 7 rows in spreadsheet
While LLoop <= Lrows.........................
I get the following error: Run-time error '1004': Select method of Range class failed at the following code line:
Worksheets("Sheet1").Range("A6").Select
Newcomer to Excel 2007 but long time programmer for Excel 2003. I am having problems with code that I feel should work. Code fails at the Select command with a "Run-time error '1004': Select method of Range class failed:
View 3 Replies View RelatedI have this:
Private Sub CommandButton1_Click()
Worksheets("Sheet1").Activate
Range("A1").Select
Selection.End(xlDown).Select
ActiveCell.Offset(rowOffset:=1, columnOffset:=0).Activate
ActiveCell.PasteSpecial
End Sub
it errors to: SELECT METHOD OR RANGE CLASS FAILED
this is some real simple code but for some unkown reason it keeps failing on me..
Sheets("All Work").Select
Cells.Select
Selection.Copy
Sheets("Sheet3").Select
Cells.Select
ActiveSheet.Paste
Sheets("All Work").Select
The second Cells . select doesnt work for some reason when i attach it to a button on the work sheet and i get the message
"runtime error "1004"
select method of range class failed"
but when i run just the macro it all goes smooth.
I am getting this error when trying to generate the link report ....
Debug tells me that this makes reference to a sheet is not there , I have checked and it seems to be present
It is an urgent issue as it is preventing me to generate link reports...
I have created a spreadsheet that is 38mb and needed to size it down. I recorded the following macro to do this. This essentialy jut copies the top line of the relevant columns on each page and then copies the formulas down, calculates, and then pastes just the values of these calculations, thereby reducing the sheet to a third of its size. The macro works if I run it from the macro option on the toolbar, but when I assign it to a command button I keep getting ' select method
View 13 Replies View RelatedWhen the public routine ChangeColours is called from a Command button called ButtonX on SheetX it works fine. But a command button called ButtonY on SheetY cannot run it. When ButtonY is clicked, the error is at the line :
Sheets("SheetX").Cells(4,5).Select
Where it says that "Select Method of Range class failed"
Private Sub ButtonX_Click()
Call ChangeColours(0)
End Sub
Private Sub ButtonY_Click()
Call ChangeColours(0)
End Sub...............
I'm getting "1004 select method of range class failed" on the Range statement below. This code is preceded by a number of range selection and formula-setting statements, nothing unusual.
Worksheets("summary").Select
Range("B5").Select
I m trying to use some simple macro recording for a command button click. I keep getting the "Select method of range class failed" error from the following code.
From reading the forum it seems to be a common mistake by newbies, couldnt work it out for myself though...my command button is located on a different sheet to where the select function must work...from the code you can see that there are around 20 sheets that need to be used from the one command button...
Private Sub CommandButton1_Click()
Sheets("Treviso").Activate
Range("G21:T21").Select
Selection.ClearContents
Range("G39:T39").Select
Selection.ClearContents
Range("G61:T61").Select
Selection.ClearContents
Range("G77:T77").Select
Selection.ClearContents.....
I am trying to copy set of values in a particular row as per the condition (Value in cell (1,2) = -40). find the code below:
Sub Mohan()
Dim Row As Integer
Sheet1.Activate
[Code]....
My excel version is 2007 and i am on WIN7 64bit
I have a workbook with VBA which was working fine earlier. Lately i have been getting
"Runtime error 1004" Select method of button class failed.
I am adding buttons dynamically in a loop in a sheet and what surprise me is , i go to debug mode when error pops up and it points to below line
MySheet.Buttons.Add(ActiveCell.Left - 5, 25, 20).Select
but my code is running in a loop and i can see that atleast 20 buttons were added and it fails to select when it try to add this iteration. It is completely confusing me.
My entire below code is in a loop
Code:
maWrk.Cells(xIt1, yIt2).Select
mySheet.Buttons.Add(ActiveCell.Left - 5, 25, 20).Select
Selection.OnAction = "callMe"
[Code]....
I also notice that when it fails, on select method .. the button was actually added to the sheet with caption/name as "Button 65536" but then fails to select it. What makes the select to fail after adding the button? Could there be anything special with Button 65536?
Is there any better way to code the adding button and setting action and name for excel 2007?
note before entering the loop i am deleting all the shapes with myShape.Delete which name matches "btRun"
I also want to highlight that i don't have 65536 rows in my sheet. I just have 200 rows. and when this error happens it is on row 150 so firstly i wonder why it is naming the button as Button 65536. I would assume it will start with 1 and go on increments.
What makes excel to fail to select an added button in VBA?
I have used the macro recorder to generate the select range and clear part of the following macro.
Private Sub CommandButton2_Click()
Dim test As Worksheet
Sheets("Industry").Copy After:=Sheets(Sheets.Count)
[Code]....
I get the runtime error 1004 - Select method of range class failed.
I have used similar script in other macros without error.
Check Personnel Number in Data Tab with Personnel Numbers in Insert Tab. If they match copy that row from Insert Tab and paste it into the next available row in the Moves Tab.
Column Descriptions: Name, Age, Phone Number, Personnel Number, Notes
Worsheet Tabs: Data, Insert, Moves ....
I found the following for something that I was searching for on the web.
Selection.Columns.PasteSpecial Paste:=8
My question is two fold, 1) What does the '8' mean? 2) Is there someplace that tells me what other numbers for PasteSpecial mean?
This solved a problem that I had when trying to do a PasteSpecial for Column Width. What I had been trying was the following:
Selection.PasteSpecial Paste:=xlColumnWidths, Operation:=xlNone, _
SkipBlanks:=False, Transpose:=False
But I would get the error run time error '1004', PasteSpecial method of Range class failed.
This script is resulting in:
Run-time error '1004'
PasteSpecial method of Range class failed.
[Code] .....
It highlights
[Select Code] .....
when I hit debug.
I'm attempting to write an OutLook 2007 macro that extracts excel spreadsheets from incoming email and saves them as a .csv file. Before saving the file I need to delete the header row. I am getting a "Error 1004 - Delete method of range class failed" error when running this code.
Here is the code: (the bolded line is where I'm getting the error)
Public Sub ConvertToCsv2()
Dim xls As Excel.Application
Dim oWB As Excel.Workbook
Dim tmp As String
Dim ws As Excel.Worksheet
[code]....
My code is :
Public Const GRAPH_PutData_COL1 = "A"
Public Const GRAPH_PutData_COL2 = "B"
Range(GRAPH_PutData_COL1 & "1").Sort Key1:=Range(GRAPH_PutData_COL2 & "1"), _
Order1:=xlAscending, _
DataOption1:=xlSortTextAsNumbers
it is showing error, "sort method of range class failed error 1004"
Above error only showing when first record is empty...
As part of a larger Macro I have the following Code:
Range("X2").Select
ActiveCell.FormulaR1C1 = "=IF(RC[-1]>0,""Yes"",""No"")"
Range("X2").Select
Selection.AutoFill Destination:=Range("X2", "X" & lastRow)
Range("X2", "X" & lastRow).Select
Selection.Copy
The code works fine when I have more than two rows of data that I am manipulating but gives me an Run Time Error - AutoFill Method of Range Class Failed at the following line:
Selection.AutoFill Destination:=Range("X2", "X" & lastRow)
When I have only one row of data I get the Run time error.
Any code that will allow me to process the data if I have one row of data as well.
When I run this code I get a run time error 1004, copy method of range class failed, I have an autofilter on and it is showing 5 rows, the 5 cells in column A of sheet2 gets copied to sheet1 OK but I get the error?
What do I need to do to fix this?
i added a "Microsoft office spreadsheet 11.0 " object using additional control and used it in my form of Excel Macro. then i added some data from the combo box to the embedded excel object dispalyed. the form displays correctly and am even able to add data to cells.
but am not able to sort a column. gives me the error message "Sort method of range class failed"
have tried to make sure the sheet is active using the ".Activate" with the object name. this is the only solution available on the existing forums.
The below code was working absolutely fine yesterday but since this morning I am getting an error: "Insert method of range class failed" at the following line:
[Code].....
Here is the complete code.
[Code].....
I have googled it and didn't find any workable solution. My DataEntry sheet is unprotected.
I lost 2 days trying to discover the bug in my program, but I coudn't find the right answer.
How can I activate the AutoFilter to show me the rows selected with "YES" ?
This is the code... The compiler stops always at the command Selection.AutoFilter.
I am encountering this error when I try to run code I have written on my own machine. I am working with all unprotected sheets, and I am running Excel 2007. All of the sheet exist.
Here is my ....
This very simple macro in Personal.xlsb is driving me crazy!
I want to paste a previously selected and copied range at the current position as values. The range will seldom be the same as previously, and the position where it will be posted will be random too.
The code is: ...
