Copy Paste Range To Protected Sheet
Sep 5, 20071.to copy the A2 Cell of Sheet1 to A3 cell of Sheet 2 by VBA?
Also,
2. How can I copy A2:A10 from sheet1 to A1:A9 of sheet 2 by VBA?
1.to copy the A2 Cell of Sheet1 to A3 cell of Sheet 2 by VBA?
Also,
2. How can I copy A2:A10 from sheet1 to A1:A9 of sheet 2 by VBA?
Enabling users to copy and paste values in a protected sheet.
The sheet is protected because some of the columns are autopopulated based on formulas and I do not want someone to spoil the file.
Users are complaining that in many cases half of the information which they enter in one row have to be repeated in the nect 10 rows.
[Code] .....
is already in place to allow users to select and copy. How to enable them to paste in the same protected sheet?
how to unprotect the sheets in order to be able copying datas to to certain cells.
The unprotection works but only when I start the macro the second time. I do not understand why.
After I did the updates I want to reprotect the sheets but that seems not to work in my case.
ActiveSheet.Unprotect Password:="my_password_here"
'unprotect the sheet
ActiveSheet.Protect DrawingObjects:=True, _
Contents:=True, Scenarios:=True, Password:="my_password_here"
' Reprotect the Sheet
I have spent ages creating a work diary and have protected the sheets using VBA however on finishing the sheet one important thing that needs to happen is the ability to copy and paste information from the boxes to another worksheet. i.e MONDAY - SUNDAY
View 1 Replies View RelatedI need to copy and paste a range from one workbook to another workbook automatically.
Basically, I have 180 files in a folder. The details are:
1) 90 master files
2) from these a range named "COPYTOE" has to be copied and pasted into another 90 report files.
3) I have list of files & its passwords in a separate file named FNAME.XLS. In this, Sheet1, A1:C the details consist like this: ....
Need a code using application.inputbox to get a range, then use that range to copy and paste the range's link and format to a different sheet? The specifics don't matter, I just can't figure out the syntax. Here is what I have currently:
View 2 Replies View RelatedI have a sheet named "Fittings Summary" with an export button. I need some code that will copy range A1:G38 of the fitting summary sheet then open a dialogue box asking for the following "Please Enter Tag No" once a tag number is entered I would like a new sheet to be created in the same workbook named with the tag no entered previously then the copied cells pasted into it. I would like to keep the formatting of the cells but not the formulas within.
View 10 Replies View RelatedI would appreciate if someone can help me figure out a macro that will copy range (A3:T112) from "Step 1" sheet to next available row in "Step 2" sheet.
View 8 Replies View RelatedI have been struggling for a while to copy data from one worksheet to another and reset the target range.
The copy bit is cool, the range resetting bit is not. I have tried various methods, but none seem to work.
For example, the below code generates an error: "Compile error: Argument not optional"
I have stuck the particular command button script below to let you see what I am trying to do:
Private Sub cmbFilter_Click()
Dim sCriteria As String
On Error Resume Next
I want to allow user copy(Ctrl + C) and paste(Ctrl + V) a row. because some columns are locked and the sheet is protected. so, when user doing so, a warning dialog is show and can't do the paste.
so, I want to make it available in code. what I want to do is add some codes in this function:
VB:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Application.CutCopyMode = True Then 'there are someing in clipboard
Sheet1.Unprotect 'unprotect sheet, so can paste
End If
and in Worksheet_Change function, I protect the sheet again.
But I find that when I do Sheet1.Unprotect , the clipboard is empty! I just want to allow user can copy and paste a row, the locked cell's value can be ignored.
I want to allow user copy(Ctrl + C) and paste(Ctrl + V) a row. because some columns are locked and the sheet is protected. so, when user doing so, a warning dialog is show and can't do the paste. so, I want to make it available in code.
what I want to do is add some codes in this function:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Application.CutCopyMode = True Then 'there are someing in clipboard
Sheet1.Unprotect 'unprotect sheet, so can paste
End If
and in Worksheet_Change function, I protect the sheet again. But I find that when I do Sheet1.Unprotect , the clipboard is empty!!! I just want to allow user can copy and paste a row, the locked cell's value can be ignored.
I've been trying to paste formula throughout a range of cells in the same column. Trouble is, I protect some sub- total cells and don't want the formula to paste over those sub-total formulas.
If I protect the sheet and paste the formula throughout the column including the protected cells, I would get an error message.
How can I paste the new formulas without getting into trouble of the protected cells?
Essentially I need to copy the first 8 cells in a row in one sheet (for example: A3:I3) when the word "Actuals" is entered into A3 from a drop down list. Then the copied data needs to be pasted to a another existing worksheet in the same workbook in the next available row. The data includes mostly values, but there is a formula in column H that creates a hyperlink out of the content in column G, friendly name in column I.
I am not stuck on the idea of having "Actuals" entered in column A as the trigger or change event and there will be times when a new copy/paste of the same data will need to be done more than once at a later date.
For further information, column B contains a serial number/productID number.
I am looking for VBA code that will unprotect the Workbook, prompt the user for the number of rows to be added, find the last row in the Worksheet, insert the requested number and reprotect the Worksheet. I would like the location where the rows are inserted to NOT be dependent on the "active" cell.
View 6 Replies View RelatedI was handed a workbook that is password protected. The worksheets are not password protected. Because the workbook is protected, I cannot add or delete worksheets.
I figured that I could get around this by copying the worksheets to another workbook, but I can't even do that. Naturally, no one remembers what the password is.
Have wrote the following code to enable 7 sheets to be unprotected, the pivot tables and charts housed within them to be refreshed then the sheets to be protected. However, once the macro has finished I need to be able to still use the filters on the pivots to flick through data. I also need the data table to be protected with the exception of a cell range that can be edited (preferably password protected.
Sub Refresh()
'
' Refresh Macro
' Refresh Pivot Tables/Charts
[Code].....
I have this code that works fine until I password the sheet and the range (b9:d65536) is protected. When I protect the sheet and make a change I get a debug error. What would I need to add/change to handle protected cells on a protected sheet?
VB: AutoLinked keywords will cause extra spaces before keywords. Extra spacing is NOT transferred when copy/pasting, but IS if the keyword uses "quotes" ....
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies View RelatedI want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
I am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.
View 2 Replies View RelatedI'm trying to create a command button on my sheet that when clicked will find all rows in column u that read Engineering Evaluation and then copy certain cells from that row to another sheet. The kicker is that this button will be used over and over again as more entries are entered into the log. I only want each row counted once.
Right now I get a run time error for the "For Each Cell In Application.Intersect(Range("u:u"), target)" line.
Everything seemed to be working until i tried to copy and paste something on my spreadsheet (sheet titled Input Sheet). When I paste anything onto this sheet I see the Paste happen and then Excel just hangs (no errors?). I just left it for over 5 minutes and nothing happened (still hanging). I had to close it down using X
I have LOTS of different codes and different sheets in my spreadsheet. I was wondering if anyone knows how I can go about Pinpointing the problem. Chances are no one will be cutting and pasting but I would like to know why this is happening but have no idea how to go about investigating?
I would like a macro that will go to a fixed sheet, copy the format, go back to the previous sheet and paste the format. My problems arise going back to the previously activated sheet rather than just a fixed sheet.
View 2 Replies View RelatedHow to create macros. I need to copy a certain group of cells from one sheet to another, and then do it for x number of times. I'm just using the record function and now i'm lost. Here is the code i currently have:
Sheets("Mapping QTR2").Select
Range("B137:D230").Select
Selection.Copy
Sheets("ExpDB_Q1").Select
[Code] ....
Also, column C is blank. i would like to get the values from another list in the same workbook, say "branch list". I would like to populate Column C with one specific branch for each "batch", if that makes any sense...
i want to copy a row from one sheet and paste it in another sheet based on a condition.
View 5 Replies View RelatedI have set up a workbook with sheets named for each month.
I have 70+ separate excel files (one for each month) that each have a single sheet I want to copy into the new workbook's corresponding month sheet.
Each file is named different but the name of the sheet in those files that I need will all be the same.
Is there a way I could sit in the sheet I want it pasted to, run a macro that I can point to the correct file/workbook -- preferably without opening -- and then have it copy the contents of the sheet I want (again, will always have the same sheet name).
I want the sheet copied with formatting and all, an exact copy.
This link seemed useful - if i could control which sheet it copies more easily since for me the source data always has a different file name. [URL] ........
I thought I lost that original message so I rewrote everything - differently - then I saw the restore button so I'm leaving both phrasings.
I would like to know if there is a Macro that could ask me which workbook to copy from, select the sheet in that workbook called CAP (sheet will always have the same name but I need to copy the sheet from 70 different files/workbooks) copy the whole sheet with formatting and all, and then paste it in my active sheet on the new workbook I am in.
I want to take data about a particular partner we have (CAP) out of the monthly summaries for the last ~72 months (which each have their own file/workbook) and put them all in one workbook just for this partner, on each sheet by month still.
I am only interested in automating everything I have to do for 1 month, but in a way that would easily let me do it again for the next month, and the next and the next, 70 times.
But a Macro would still be easier than opening each file, going to the sheet I want, copying everything, going back to my new workbook, pasting everything, closing the extra workbook, then doing that ALL again 70 times.
Have you ever copy a row with formula in locked cells & insert it in a protected worksheet?
View 1 Replies View RelatedTrying to assign code to comm. button on User form to copy lets say:
(sheet1, rangeB2:B21) to (sheet2, first blank row rangeB2:B21) and paste it as text value one more question: what to be aware in case of sheets format (merged cells, hidden rows...)