Copy / Paste Every Sheet Single (P Column) And Paste To Notepad

Sep 6, 2012

copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.

View 1 Replies


ADVERTISEMENT

Copy And Paste From Notepad VBA

Dec 3, 2009

I have two macros. The first one gets a file name and worksheet name. Then it calls the second macro which opens up notepad (with the specified file name) and pastes the information in excel. The problem that occurs is when I call the second macro more then once in a row from the first macro. It runs great the first time but then problems occur as it tries to run the macro again. (Some times it just closes my excel file with prompting me to save). Calling any of the files works on an individual basis (I've tried for all three). I've erased some of the code due to privacy issues but path location is identical for all three files. Here is the code.

View 6 Replies View Related

Excel Macro To Copy Data From Array And Paste To Separate Sheet Paste Special Transpose

Jan 29, 2014

I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.

The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?

View 1 Replies View Related

Simple Copy Sheet Paste In Other Book But Paste Values?

Jun 20, 2013

Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.

VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")

[Code].....

View 9 Replies View Related

Copy And Paste Column From One Sheet To Another VBA?

Sep 29, 2012

I have the following codes, they almost work. I run the first code, and it copies and pastes the data, however, when I run the second code, it deletes the information that was previously pasted on column A.

Code:
Sub copy_Client_ID_Tickets_to_Top5_Ticks()
Dim rng As Range, WS As Worksheet
Application.ScreenUpdating = False

[Code].....

View 3 Replies View Related

Copy And Paste From One Sheet To Another Based On Column A Using A Macro Copy Button

Jan 22, 2007

I want to copy and paste from one sheet to another based on column a using a macro copy button.

E.g. if column a value = apple then copy that row into the apple sheet.

View 9 Replies View Related

Copy/paste Row To Another Sheet Based On Value In Column

Mar 16, 2009

I've two sheets: "present" and "removed". I would like to have a whole row copied and deleted and existing rows moved up in "present" when I type the word "yes" in column E. The deleted rows are to be pasted into "removed", with two extra pieces of data - date removed and name of person removing it - to be asked in pop up boxes and inserted into col F and G respectively in "removed".

View 4 Replies View Related

Copy / Paste Column A B C And D Into End Of Sheet With Headings

May 12, 2014

I need to copy Paste Column A,B,C and D column into the end of the sheet with their headings.

View 8 Replies View Related

Copy Row From One Sheet And Paste To Another If A Key Word Is Found In 1 Column?

Apr 15, 2014

I have 10 worksheets in my workbook. The two that I'm concerned with in this post are "Main" and "Completed".
If Column AA in "Main" contains the word "Complete" (which is from a drop down list) I want to copy the entire row from "Main" and paste in the "Complete" sheet without over-writting previous pasted rows.

Back in sheet "Main" I want the data in that row to be cleared with the exception of Column A as it contains a formula for sorting blanks. If I delete that row it will mess up my links on other sheets.

View 14 Replies View Related

Macro To Copy Duplicate In Column And Paste In Another Sheet With Its Corresponding Row

Mar 12, 2014

I am searching for a macro that will find duplicate value in row A2 (id) then copy its corresponding column to a new sheet.. please refer to my attachment, and see the result i want on sheet2 and sheet3

Sample.xlsx‎

View 3 Replies View Related

Find Text In Column, Copy Next Row And Paste In New Sheet

Oct 9, 2009

Essentially, I have 2 Sheets:
"SheetWSS" = data to be copied
"SheetWSD" = destination of copied data.

Below is a sample of the data in "SheetWSS"
----------A------------------------B-------------------------C
1------Trade ID -------Description---------System no.
2--------579----------------Loan ---------------------- 7
3--------580----------------Deposit---------------------22
4--------702----------------Deposit--------------------- 11
5--------703----------------Loan ----------------------- 58
6--------732 ---------------Loan------------------------66
7--------733----------------Deposit-------------------- 99
etc...(no more than 10000)

Now, an explanation of the data:

1) I work for a small bank (CORP) that takes deposits and gives loan.

2) CORP books these trades using only system no. 7 and 11; other system nos. belong to customers.

3) When a single trade is booked, the 2 sides of the transaction is recorded (by Trade IDs) . E.g rows 2 and 3 relates to one trade. So if CORP loans money with system no.7 to CUSTB, who uses system no.22, it shows for CORP a loan and for CUSTB, a deposit.

4) Everyday, the data in "SheetWSS" is updated with a different number of rows from previous, but the number of columns remain the same.

So, here's what i'ld like the macro to do:
1) Go into Column C, find system no.7 and 11.
2) For each 7 and 11 found, Copy the next row . So if for e.g, system no.11 was found in C4, i want the ENTIRE ROW 5 to be copied.
3) Paste the entire next row in "SheetWSD" until we have a list of all opposing sides of the same transactions initiated by CORP.

View 3 Replies View Related

Copy Paste Rows To Another Sheet Based On Column Criteria

Jan 17, 2007

I have a file that has two sheets, I have some formulas in the first sheet named "Data",What i would like to have is, If column G in the sheet Data is "Closed", then i want that particular row to be cut from the sheet " Data" and pated in to the Sheet "Done".

View 5 Replies View Related

How To Copy Few Column From One Sheet And Paste It To Other Sheet

Feb 13, 2012

I have a requirement to copy a few column(like a,d,e,f) from sheet1 and paste it to sheet2 column.
where column a of sheet1 will be copy to column d of sheet2.if anything data is already there then overwrite that column.

View 2 Replies View Related

Macro To Copy And Paste Data Column Wise From One Sheet To Another After Row Count

Mar 24, 2014

in creating a Macro which copy and paste the data from "Sample2.xlsx" file to "Sample.xlsx" file after row count in each column. Macro should not overwrite any previous data present in workbook.

Note: Sample2 workbook is containing a Variable Columns. Macro should match the headings of the Column in both workbooks and then copy and paste the data after row count.

View 4 Replies View Related

Excel 2003 :: Find Last Value In Column And Copy Paste Cells To Another Sheet?

Dec 19, 2011

I need to find the last instance of "IO" in column E and copy cells in columns B to E for the row below to another tab called "OP" cell O9.

I need the VBA code for Excel 2003.

View 1 Replies View Related

Macro VBA For Copy Paste Columns Of Data From Three Tabs Into One Column On Separate Sheet

Nov 18, 2013

I have a workbook with four tabs or four sheets.

Tabs 1, 2 and 3 have a column of data (Column A) on each sheet. They all start from the same cell. Each cell of data are just numbers. The column (an array) of data will not have blanks between.

But, they are not the same number of data. They vary.

Meaning, Tab 1 may have 15 numbers (A1 to A15), Tab 2 may have 20 numbers (A1 to A20) and Tab 3 could have 5 numbers (A1 to A5). Each iteration of the workbook may have different number of data in the A column on these tabs.

Now on Tab 4, I want combine the data from all three tabs into one column (in column A).

So, Tab 4 has a column A with data from Tab 1 copy and pasted to (A1 to A15) as values, then (A16 to A35) have Tab 2 data copy pasted as values and (A36 to A40) have Tab 3 data copy pasted as values.

Basically, the macro on Tab 4 has to count the number of rows on each Tab that are populated with data values and figure out to copy all the data on Column A from each three tabs and paste the data value into the Tab 4 in one column of data (in values).

View 6 Replies View Related

Copy Single Cell Paste Range VBA

Jan 12, 2009

The following does paste the formula into the dynamic range, however, it doesn't move on to the next step in the code. It seems to get stuck on the last line. I let it run for 5 minutes and it still did not move to the next set of commands ...

View 9 Replies View Related

Copy/Paste With Single Line Using VBA (2007)

Sep 21, 2009

I had the following code that worked great with Excel 2003, but I receive an error with Excel 2007.

Dim Master As Workbook
Set Master = Workbooks("Master.xls")

For Each wb In Workbooks
wb.Activate
If wb.Name Like "S04*" Then _
If Not Range("A2") = Empty Then _
Range(Cells(Rows.Count, 1).End(xlUp), Range("A2")).EntireRow.Copy _
Master.ActiveSheet.Cells(Rows.Count, 1).End(xlUp).Offset(1)
Next wb

I receive error 1004 "application defined or object defined error" when it tries to paste to the "Master" sheet using the the above lines.

Is there something in the formatting that has changed with 2007? I'm guessing I have to slightly change the line in bold.

View 9 Replies View Related

Insert Single Blank Row Between Multi-sheet Paste Process

Dec 5, 2008

I have mananged to find and tweak the following code in order to serve my copy / paste to master sheet requirements.

At the bottom of the code I have added a delete rows based on column contents routine although I'm not sure if it is actually the right one to use.

I have included it in the same module in order to tidy up the whole process and have it all operate under one click.

As stated on the sheet in this exmple, The paste could consist of any number of sheets although the range is always the same on each sheet. (only amounting to around 20 rows that we are dealing with so no reams of data with odd empty rows that would take an age to find otherwise).

The data can look like it does on Sheet 2 here and also could look like it does on sheet 3. (this data is coming from a sales rep's order sheet)

From the routine in module 1, I just don't know where an "add an empty row" or delete all empty rows bar 1" code would need to be inserted in order to keep the process going until all sheets are copied.

I'm aware that with the delete code at the bottom, the whole copy process is completing before the delete process then does it's bit so think I'm on the right track in thinking that the delete all empty rows but leave one" requirements needs to be further up the code but I just don't how to get the result I need or where that code should break into the routine.


The only other way I can think to acheive the result is to allow the range to increase by 1 row on the form but somehow make sure that the last row in the range contains a character in column B to "trick/force" the delete routine to leave that row in. That would be do-able but the trouble is, how do you get a value into a cell that the delete proces would treat as data but not be visible so keeping my spacer line tidy? I've tried just putting a space in the last row of the range in column B but the row still gets deleted.

View 7 Replies View Related

Cut And Paste Single Column Data In Different Column According To Year

Dec 5, 2012

I have a file which is divided into 2011, 2012, 2013 and 2014 years in column A. I want these data in different column according to year. For example, Column E(2011), Column F(2012), Column G(2013) and Column H(2014).

Attaching sample a file with sample data to be converted.

It is also to be in consideration that data in column B and C should not be repeated and all year data should come in front of it.

I want this by coding or formula only. I dont want to use pivot table for this.

Expecting Result.jpg

View 7 Replies View Related

Copy, Paste, Change Font Size, Copy, Paste, Print VBA

Mar 29, 2009

I'm using 2003.

1. Copy cells B5 to V-First blank row in Strength Tests worksheet
2. Paste cells into Racks worksheet in cell C5
3. Change font size to 6
4. Sort by Column T descending then by Column C ascending
5. Copy one row (A5-W5 (1Rx23C)) from Racks worksheet
6. Paste row into M1 worksheet in cell D4
7. Print M1
8. Drop down one row on the Racks worksheet
9. Repeat steps 5-8 until there's a blank row.

View 9 Replies View Related

Paste Text Inside A Box On Sheet 1 That Automatically Paste Into A Cell In Sheet 2?

Mar 3, 2014

Can I paste text inside a box on sheet 1 that automatically paste into a cell in sheet 2? I'm trying to make sheet one look more like a web page. I want to be able to create text boxes on sheet one that will automatically copy the text into a certain cell in sheet 2. Seems like I seen something a long time ago where you go to sheet2 and in the cell you want the text to show up, you type in something like =sheet1 box1 .

View 1 Replies View Related

Copy / Paste Certain Cells Then Paste 3 Sheets Into New Workbook - VBA 1044 Error?

Feb 3, 2012

This macro works fine on my machine but not with other users:

This should copy/paste certain cells then paste 3 sheets into a new work book.

ON other computers it seems to paste in a picture? works OK for me?

Sub ValidationTests()
'
' ValidationTests Macro
' Macro recorded 21/12/2011 by '
'
Sheets("Score Sheet").Select
Range("A8:M18").Select
Range("H18").Activate
Selection.Copy

[Code] ..........

View 1 Replies View Related

Create Macro That Can Copy / Paste Or Cut / Paste Rows Into Different Spreadsheet

Oct 1, 2012

I have one workbook that needs two macros.

On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".

This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.

I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.

If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.

.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.

View 2 Replies View Related

Copy And Paste Without Disturbing Existing Data In Paste Area

Nov 25, 2012

HTML Code:

Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6

Range Pear
A B C D E
4 1 3 5
5 1 1 1
6 2
7 2 2
8 5 7

Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6

View 2 Replies View Related

Prevent Copy / Paste Cells With Comments Or Allow Paste But Do Not Paste Comments

Feb 4, 2014

How would you prevent the copy/paste of cells that have comments?

Also, how would you allow cells with comments to be copied and pasted without pasting the comments?

I also have an aside question about the forum advanced search. When searching for multiple search words, how would you type the search to include all words, for example, "prevent" & "paste" & "comments".

View 7 Replies View Related

Copy/paste Worksheet Into A New Sheet Generated By New Data In Master Sheet?

May 26, 2013

I am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.

View 2 Replies View Related

Copy And Paste To A Different Sheet

Dec 10, 2008

Copy and paste to a different sheet. This is what i have

View 2 Replies View Related

Copy - Paste From One Sheet To Another

Apr 23, 2009

I have this piece of code that copies a block of cells from sheet B to sheet A.

View 14 Replies View Related

Copy Paste At End Of Sheet

Sep 1, 2009

I have 2 sheets, I want to paste the data from sheet2 to the bottom of sheet1... However the number of rows change each day on sheet1, so the cell that the paste happens too changes each day. Also I will need to do this to a few different sheets, so if you could make this universal and put in the comments in the formula.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved