Copy Range Of Cells From All Worksheets To One Worksheet?
Sep 5, 2013
Copy Ranges From all Sheets.xlsx
I need a macro that will copy a range of cells, it is always in the B2:B7 range from all the worksheets in a workbook. This is just a sample of the actual workbook, which has 100's of worksheets. The macro also needs to maintain any formatting [conditional or regular].that has been added to a particular cell. The ranges need to be pasted in a worksheet named "content" and arranged in columnar sequence, please see attached sample.
Let's say I have a workbook with 7 worksheets named, for example, "Instruction", "Begin", "Worksheet 1", "Worksheet 2", "Worksheet 3", "End", and "Data". (in that order)
What I want to do is run a macro to go to whatever worksheet that is in between "Begin" and "End" and copy, for example, cells $C$1:$D$10; then paste as formula into worksheet "Data" starting from cell C1 and then down a list (i.e., copied cells from "Worksheet 1" get pasted as formula into "Data" cells C1:D10; then copied cells from "Worksheet 2" get pasted as formula into "Data" cells C11:D20, and so on and so forth).
But if I were to add more worksheets (e.g., "Recipe" and "ToDo") positioned in between "Begin" and "End" and run the macro again, it'll either 1) re-copy all the formulas from the included worksheets back into "Data" including the formulas from the newly added/placed worksheets or 2) it'll add the formulas from the newly added/placed worksheets and paste into "Data" at the end of the list.
Can create the macro to run based on the position of worksheet, and not based on the name of worksheet, since ultimately there will probably be over 10 worksheets between "Begin" and "End".
I need a code that will copy any cells with data in range I3:I41 from sheet2 and paste it in sheet1 starting at cell B3. Then copy any cells with data in range I3:I41 from sheet3 and paste it in sheet1 starting at the next empty cell.
I have one master worksheet named "Season" and 30 other worksheets named "1,2,3,4 and so on to 30". I ideally want to copy the shapes (msoShapeOval) from the worksheets- "1-30" to worksheet- "Season". When the shapes (msoShapeOval) are copied from worksheets "1-30"
I want them to keep thier position that they were in when copied to worksheet- "Season".
The shapes (msoShapeOval) are in range "A1:AZ43" in worksheets "1-30" and would be placed in worksheet "Season" range "A1:AZ43"
I have been at this for days and i can't quite get it right. I have multiple worksheets of clients all formatted the same. I need a Macro/VBA that will take from Each sheet onto a master sheet the Name of the Client(Cell I1 from the sheet) Under the name I need the text Authorization #: then the data(C3) Under that I need the text Dates of Service Expiration: then the data (D5) Then the text 90801 Balance: then the data from (C30) Then the text 90806 Balance: then the data from (F30) Then the text 90847 Balance: then the data from (I30) Then the text 90853 Balance: then the data from (L30)
Then a couple Spaces then the same exact data from the next sheet...till all the work sheets are done.....is it possible?
Dave responded by suggesting the following:
Sub CopyFromAllSheetsButMaster() Dim wSheet As Worksheet Dim wsMaster As Worksheet
Set wsMaster = Worksheets("Master")
For Each wSheet In Worksheets If UCase(wSheet.Name) <> "MASTER" Then With wSheet .Range("I1").Copy _ Destination:=wsMaster.Cells(Rows.Count, "A").End(xlUp)(2, 1) 'More Copy Method code here End With End If Next wSheet End Sub...
I am developing a Workbook where I import data to one worksheet and then disseminate it to other worksheets. I am not sure if I am overthinking the process, but I am having difficulty writing the macro and getting it to run through the entire list of rows.
There are 4 Columns in the one worksheet, named "Update": Column A supplies the name of the worksheet that will be updated Columns B-D contain the data that will update the sheets.
The process that I am trying to write the macro for is a follows: 1. Select/copy the range, starting with B1:D1 on "Update" 2. Navigate to the appropriate worksheet to be update, determined by A1 3. Identify the first blank row, starting with A5 4. Paste the data B1:D1 to A5:C5 (or next available line) 5. Navigate back to "Update" and begin the process again with the next row B2:D2
This process should continue until there is no value in Column B on the "Update" worksheet.
I am a novice in VBA. I want to copy a range of value from Sheet1 and paste 1st value in the range to Sheet2, 2nd value in Sheet3, 3rd value in Sheet4 and so on.
Ex Sheet 1 has a value in cell B1 : C02 B2: C03 B3: D01 B4: D03 B5: D04 and so on....
I want C02 to be pasted in Sheet 2, cell B1; C03 pasted in Sheet 3, cell B1; D01 pasted in Sheet 4, cell B1...and so on.
I have data in some of the cells within range A26:A39
These cells are populated via an IF function on another worksheet. Even though the cells appear blank (as in the value returned is ""), there is a formula in these cells. I think it's called formula blank?
I am looking for a way to copy the data from the cells within the range which are not blank (ie: not = "") and paste this data elsewhere on the sheet in a list with no blank spaces in between.
I anticipate that there will be 4 non blank cells within this range.
Ideally I would have data from the nonblank cells copied and pasted to cells A40 A41 A42 A43
look for a certain value in worksheet A and copy that row of data to Worksheet B.
However, it seems to be only copying the row in worksheet A and pasting it. Is there something that a noob VBA scripter has missed out?
PHP Private Sub GetInfo_Click() Dim r As Long, LastRow As Long, Status As Integer Dim Message As String, Title As String, Default As String, MyValue As String Application.ScreenUpdating = False
MyValue = Range("A4").Value Workbooks("invoice.xls").Worksheets("A").Activate LastRow = Range("C65536").End(xlUp).Row For r = LastRow To 1 Step -1 If Cells(r, 1).Value = MyValue Then Rows(r).EntireRow.Copy Workbooks("invoice.xls").Worksheets("B").Activate Rows("8").Select Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False Status = 1 Workbooks("invoice.xls").Worksheets("A").Activate Rows(r).EntireRow.Delete
Exit For End If Next r Application.ScreenUpdating = True
Basically, i have a common workbook template that is used by multiple users across the business to request a cost for numerous new products.
Within the template, there is a common section at the top, where specific project information is entered. There is also a table beneath where 1 or many products can be entered, with specific information relating to that product in the same row.
All the submitted requests are uploaded via an email attachment, to a particular sharepoint directory.
What i would like to do in the master workbook is the following:-
1. Open in turn every uploaded workbook within the sharepoint directory and copy the following cells into the master workbook, each in it's own row (or next available), with the data in adjacent cells.... 1st cell to enter data is $B6.
Cells to copy from each sheet:
Common info contained within cells: $DG$2,$N$11,$N$12,$N$19,$N$13,$AO$7,$AO$8,$AO$9,$AO$10,$AO$11,$AO$12,$AO$12,$AO$13,$AO$14,$BO$8,$BO$11,$BO$14
Product specific info: $U37, $AD37, $AH37, $DH37, $C37, $O37
Depending on the number of products requested, we need to repeat (loop?) until it finds the next blank row in the table. I have hidden a blank row in the table, so there will always be one!
All of the common information needs to be included for each product specific entry.
For each file, once the upload has been completed, i would like the file to be moved to another "archive" directory.
I have attached the template for information. The master workbook is still in development so can't share currently.
I had originally posted this question on another thread since the problem i've been trying to solve is quite similar to the discussion on that thread.
I have a workbook with only one worksheet. This worksheet contains data in only the first column. However this data can be either tab or space delimited. The first few rows are junk data which i am not concerned with. I have a header and footer row and the useful cells are in between these.
What I am trying to solve is this:
1) Add a new worksheet, rename it to "COPY" and place it after the original sheet. This I have been able to achieve using the code below.
Dim PageSheet, CopySheet As Worksheet
Set PageSheet = ActiveSheet PageSheet.Activate Sheets.Add Set CopySheet = ActiveSheet CopySheet.Name = "COPY" CopySheet.Select CopySheet.Move After:=PageSheet ...............
Copy and paste each cell below when M is true or greater then 0 to a new worksheet called Price Summary. If cell is false or 0, do not copy. I would like the text in N to paste to the first available row in A and copy M as well to the corresponding B. I only need the values of these cells to copy and not the formulas. Been trying to get this to work for a while with no luck.
Excel 2007MN17$018$01920$021$022$023$024$025$026$027$028$029$030$031$032$033$034$0250# Vessel Pricing TESTWorksheet FormulasCellFormulaM17=IF(L17=TRUE,INDEX(_250lb12inlegs,B2),"$0")N17=IF(L17,"12 in.
I have an excel workbook that I have created to use in the creation of purchase orders. I have a spot for the vendor in cell D10 and my items are in the range of B17 to N17.
What I would like to have is a macro that I can assign to a button that does the following.
I have a worksheet called "Purchase Order" that has all the information in it.
When you click on a button named "Process", it will take everything entered into B17 - N28 and copy it to a worksheet named "PO# History" starting in cell B2 and moving down. Each time I click on "Process" I need the information in the range above to get entered into the next empty line on the "PO# History" worksheet.
This way I can maintain a list of items purchased and then play with them in a pivot table/graph and such.
Also, What I need it to do also is when process is clicked, the macro needs to pull the vendor name from cell D10 and put it in column A on "PO# History" for each row it adds from B17-N28.
"copy cell range based on conditions" and it didnt really get an answer. There was one that copied the info the next blank cell on that line, but im not smart enough yet to figure out how to copy it over. ( getting there though with lots of staring at code).
2 sheets. I have already created auto modules to fill in data and code,and sorted the columns so they are in line.
Sheet 1. Info : has 9 columns. So if column = 9 and the value = new. Then i want to copy the range on the columns (A:G) and then paste it on the other sheet ( Card info) as long as Column A is empty ( as in next available blank cell) ( something like a DO while worksheet("Card info").column(A) <> ""
I went through your board and found the code below posted My Mr. Tom Urtis. I tired it and it worked fine except that it needs another workbook. Can it be changed to work in the same workbook to copy to a sheet named as Main from all other worksheets that I can chose?
Sub ImportDistricts() 'Instructional Message Box MsgBox "Click OK to access the Open dialog." & vbCrLf & _ "Navigate to the folder path that contains" & vbCrLf & _ "the District workbooks you want to import." & vbCrLf & vbCrLf & _ "When you get inside that folder path," & vbCrLf & _ "use your mouse to select one workbook," & vbCrLf & _ "or use the Ctrl button with your mouse" & vbCrLf & _ "to select as many District workbooks" & vbCrLf & _ "as you want from that same folder path." & vbCrLf & vbCrLf & _ ....................
I need a macro to copy data from "sheet1" "sheet2" "sheet3" / column E and F to the worksheet "final". The number of rows in "sheet1", "sheet2", "sheet3" etc. is variable.
I have Folder with almost 21 or 22 Excel files depending on the working days in a month,
All I am trying to do is to run a Macro so that Column C and D from Sheet Name "Resource Count" from all Workbooks of Different Names from all the files from that folder to be copied and pasted to a new Workbook one after the other in new workbook.
To clarify, Each workbook in that folder will have a sheet named "Resource Count" and I want to copy Column C and Column D from all the workbooks from the folder and paste one after other in a new work book.
I think I could get this to work but the INDEX command is not returning an index of the row like it is documented. It is returning the value in the cell. In order to get this to work, I need to return the index of the row. I need to know what row the match found the item on because the value I need to copy is going to be in column J of that same row.
I have two worksheets within 1 excel document.1 worksheet is a hand filled and excel programmed worksheet (Name is website-upload)1 worksheet is a hand filled and excel programmed worksheet (Name is website-upload)
1 worksheet is a hand filled and excel programmed worksheet (Name is website-upload)
The other worksheet is a table from a database connection worksheet. (Name is ODBC_Products)
Each worksheet has a Sku column in it.
website-upload: Column AODBC_Products: Column B
Each worksheet has a QTY column in it.
website-upload: Column KODBC_Products: Column J
Goal: I would like to search the Sku column ODBC_Products and find a match for a sku that is listed in the website-upload sku column and then when I find that match, display the qty from the ODBC_Products worksheet to the website-upload worksheet.
Notes: I add columns and delete columns all of the time on this worksheet so I would rather do this in excel vs. a macro. I figure this can be done with something like:
Code: Sub Select_All_Sheets_And_Export() Dim wsWorksheet As Worksheet, wbNew As Workbook
Worksheets.Select Cells.Select Selection.Copy
[Code] ........
I have come up with the above code to select all sheets in my workbook and convert to values and then split and save each worksheet as its worksheet name in the same directory.
I data on a master document and have data sent in from various independent offices which I would like to reconcile. Each region along with the master is posted onto a separate worksheet in my spreadsheet but I would like to copy specific information in worksheet order and paste row by row onto single worksheet in order to run a comparison. The data needed is in the same order but the number of rows reported on each work sheet will differ day by day. If worksheet 1 displays 50 rows in the consolidated sheet I would like worksheet 2 start in row 51, if however worksheet 1 finished in 24, I would like worksheet 2 to start in 25. Now I also want each worksheet to start reporting once the previous worksheet is complete and when there is no data in a specific worksheet, I would like the process to be able to continue.. so sheet 1 reports, then sheet 2 but sheet 3 has no data so it jumps to sheet 4 to begin.
For example consider various cities, New York, London, Frankfurt & Tokyo, each has sales of various products from a catalogue range but the products sold differ each week based on regional trends. The master document which is independent also reports sales but this is manual so I would like to pick up any inaccuracies through reconciliation.
Outside of VBA and Macros, is it possible to get excel to report data sheet by sheet onto one in a continuous order?
I have file contains two worksheets. 1st worksheet named "list" and the 2nd one named "Template". I have a range in WS "List" let say a1:d20 that contains names. This range is not fix, it might be more or less. I need creating new worksheet using worksheet "Template" for the new sheets in the mentioned range as follow:
"Create new worksheet for each name in this range."
List is not unique, some names are duplicated. If the name repeated, create only one. Use worksheet template for each new worksheet created.
[URL] to append summary data within several workbooks. But suddenly, it works for some workbooks, but for some others, it just captures the data for the very last WS.
I worked on a workbook which has multiple worksheets( mine has 6). The data doesn't start from A1. I want to copy the data from each worksheet into a sheet called summary. I want to create the macro that would only copy the heading row once.
I want to run macro for copying specific cell values from worksheets according to their headers in one final worksheet of the same workbook. worksheets can go upto 30-31 ws as per the dates in the month. This would really save time and energy of copy paste.
i need a macro which copy and paste from multiple worksheets (except for 3 worksheets which is named after Jan, Feb and Mar) into one worksheets (named as OVERALL). The data to copy will cover from cell A1:D1 and below where there is data available.
Basically, i have a workbook that contains 2 worksheets with stock data for two stock holding sites, we're consolidating our stores and need to confirm what stock is held at both sites. I need to compare column C on both sheets to find if an item exists on both sheets, and if so copy the entire row from Sheet 2 onto the next free row on a new sheet. Col C on each sheet contains the stock number, however, on Sheet 1 the stock number is abbreviated ot the final 7 letters, with Sheet 2 showing the FULL stock code.
I need whatever is in "Sheet 1:Col C" (for example '1234567') to be compared to whatever is in "Sheet 2:Col C", and if a match is made (for example 9999-00-1234567) then the row containing the match be copied to the next free row on Sheet 3.
I am searching for a formula or simple macro to select text data from column named "SM NAME" to corresponding worksheet. I need this to populate as many worksheets as there are SM Names. ( there are usually 10 SMs)
For Example in the Master Data there are Several SM names listed. I need to extract the "ID" and "Agent" columns in the Master and populate into the workshhet with the Approriate name tab. The Master list changes regularly.
I have several exel workbooks (.xls files) and each workbook contains multiple worksheets. The number of worksheets and their names are variable. Each worksheet is formated in the same way. Now I want to copy an specific cell range on each worksheet and copy it into a single worksheet.
For example let assume that we have a a workbook called temperature.xls. This file contains 4 worksheets named: 40-1, 40-3, 40-5#, and 40-22. I want to copy a specific cell range (F46:O47) from all the worksheets in the workbook temperature.xls and paste only the values on a summary worksheet. This summary worksheet can be in the same workbook or in different one. I just wanted to add that I want to repeat this process 15 more times to summarize all my data containing workbooks. On average each workbook contains 35 worksheets so it is a tedious manual process.
I want to copy from a MasterSheet and paste into multiple sheets that are already there with out creating new ones.
I need the code to miss the first 5 sheets and then paste to the rest.
I have found this code but not sure how to change it to meet my needs
Sub test() Dim ws As Worksheet Dim i As Integer Set ws = ThisWorkbook.Worksheets("sheet1") Application.Calculation = xlCalculationManual Application. ScreenUpdating = False For i = 1 To 31 Debug.Print i ws.Copy Sheet1 Next i
