How To Copy Range Of Cells To Worksheets
Aug 30, 2013
I am a novice in VBA. I want to copy a range of value from Sheet1 and paste 1st value in the range to Sheet2, 2nd value in Sheet3, 3rd value in Sheet4 and so on.
Ex
Sheet 1 has a value in cell
B1 : C02
B2: C03
B3: D01
B4: D03
B5: D04
and so on....
I want C02 to be pasted in Sheet 2, cell B1; C03 pasted in Sheet 3, cell B1; D01 pasted in Sheet 4, cell B1...and so on.
View 2 Replies
ADVERTISEMENT
Jul 7, 2014
Let's say I have a workbook with 7 worksheets named, for example, "Instruction", "Begin", "Worksheet 1", "Worksheet 2", "Worksheet 3", "End", and "Data". (in that order)
What I want to do is run a macro to go to whatever worksheet that is in between "Begin" and "End" and copy, for example, cells $C$1:$D$10; then paste as formula into worksheet "Data" starting from cell C1 and then down a list (i.e., copied cells from "Worksheet 1" get pasted as formula into "Data" cells C1:D10; then copied cells from "Worksheet 2" get pasted as formula into "Data" cells C11:D20, and so on and so forth).
But if I were to add more worksheets (e.g., "Recipe" and "ToDo") positioned in between "Begin" and "End" and run the macro again, it'll either 1) re-copy all the formulas from the included worksheets back into "Data" including the formulas from the newly added/placed worksheets or 2) it'll add the formulas from the newly added/placed worksheets and paste into "Data" at the end of the list.
Can create the macro to run based on the position of worksheet, and not based on the name of worksheet, since ultimately there will probably be over 10 worksheets between "Begin" and "End".
View 4 Replies
View Related
Sep 5, 2013
Copy Ranges From all Sheets.xlsx
I need a macro that will copy a range of cells, it is always in the B2:B7 range from all the worksheets in a workbook. This is just a sample of the actual workbook, which has 100's of worksheets. The macro also needs to maintain any formatting [conditional or regular].that has been added to a particular cell. The ranges need to be pasted in a worksheet named "content" and arranged in columnar sequence, please see attached sample.
View 3 Replies
View Related
Apr 2, 2014
Basically, i have a common workbook template that is used by multiple users across the business to request a cost for numerous new products.
Within the template, there is a common section at the top, where specific project information is entered. There is also a table beneath where 1 or many products can be entered, with specific information relating to that product in the same row.
All the submitted requests are uploaded via an email attachment, to a particular sharepoint directory.
What i would like to do in the master workbook is the following:-
1. Open in turn every uploaded workbook within the sharepoint directory and copy the following cells into the master workbook, each in it's own row (or next available), with the data in adjacent cells.... 1st cell to enter data is $B6.
Cells to copy from each sheet:
Common info contained within cells:
$DG$2,$N$11,$N$12,$N$19,$N$13,$AO$7,$AO$8,$AO$9,$AO$10,$AO$11,$AO$12,$AO$12,$AO$13,$AO$14,$BO$8,$BO$11,$BO$14
Product specific info: $U37, $AD37, $AH37, $DH37, $C37, $O37
Depending on the number of products requested, we need to repeat (loop?) until it finds the next blank row in the table. I have hidden a blank row in the table, so there will always be one!
All of the common information needs to be included for each product specific entry.
For each file, once the upload has been completed, i would like the file to be moved to another "archive" directory.
I have attached the template for information. The master workbook is still in development so can't share currently.
View 12 Replies
View Related
Jul 27, 2007
I have a workbook with 58 worksheets in it... each worksheets is name T01, T02....T58, I need to copy a range from different worksheets...
I don't need all the worksheets in Master.xls I only need some of the worksheets...
for example .....
View 9 Replies
View Related
Sep 13, 2007
I want to copy from a MasterSheet and paste into multiple sheets that are already there with out creating new ones.
I need the code to miss the first 5 sheets and then paste to the rest.
I have found this code but not sure how to change it to meet my needs
Sub test()
Dim ws As Worksheet
Dim i As Integer
Set ws = ThisWorkbook.Worksheets("sheet1")
Application.Calculation = xlCalculationManual
Application. ScreenUpdating = False
For i = 1 To 31
Debug.Print i
ws.Copy Sheet1
Next i
End Sub
View 9 Replies
View Related
Jan 31, 2010
I am working with a workbook that i have created. The workbook has around thirty worksheets all with the starting nave of "DIV". I have a code that will loop throught the wrok book and copy the used range and insert them into a master. However what i need is a code that will loop through the wroksheets and only copy the used range only in columns A:P and starting in row 10 (i have headers from row 1-10). I have columns beyond "P" that has working information for that worksheet and do not want to copy it over to the master.
View 12 Replies
View Related
Sep 26, 2007
I am using following code to copy a range from one worksheet to multiple worksheet.
I used both the option to paste the copied content i.e. ActiveSheet.Paste and Selection.PasteSpecial Paste. However in both cases getting error message 'Paste Method Of WorkSheet Class Failed'.
find any error here
Sub CopyList()
Application.CutCopyMode = True
Counter = Sheets.Count
For i = 3 To Counter
Sheets("Summary").Select
View 4 Replies
View Related
Apr 14, 2013
I would like to copy several cells in a Summary sheet. I have 20 worksheets, corresponding to the information of 20 companies, with exactly the same format. They have obviously different data/figures.
I want to summarize some key figures into the summary sheet. I have already created the links manually and pasted all of them in a row for the first company. Now I would like to copy the same references from the other companies. Even if the cells are blocked with the dollar, excel will not go across the different worksheets to copy the same cells.
How can I do it? Certainly there is an easier way than to do 19* 70= 1330 clicks manually.
View 8 Replies
View Related
Nov 1, 2006
I have been given an assignment to copy the contents the contents from different sheets to one single sheet with following constraints. example: copy contents from say N sheets (same cell) to A sheet named XYZ to say A1,B1,C1..N respectively.
Sheet1(A9) to XYZ(B1)
Sheet2(A9) to XYZ(C1)
Sheet3(A9) to XYZ(D1)
Sheet4(A9) to XYZ(E1)
Sheet5(A9) to XYZ(F1)
Sheet1(A11) to XYZ(B2)
Sheet2(A11) to XYZ(C2)
Sheet3(A11) to XYZ(D2)
Sheet4(A11) to XYZ(E2)
Sheet5(A11) to XYZ(F2)
Sub X()
Dim lCnt As Long
' Upper bound and lower bound for no. of sheets
For lcount2 = 1 To 3
lcnt = lcnt +1
Sheets(lcount2).Activate
If Sheets(lcount2).Range("A9") = "Distinction" Then
Select Case (lCnt)
Case 1:.................
View 2 Replies
View Related
Mar 31, 2009
I have a workbook with several worksheets in the same format. I would like to have a function to output the sheets that have rows in which collumn A = X AND collumn B = Y.
I've been working on this one for a couple days now and I'm not making much progress.
View 9 Replies
View Related
Apr 25, 2014
I need a code that will copy any cells with data in range I3:I41 from sheet2 and paste it in sheet1 starting at cell B3. Then copy any cells with data in range I3:I41 from sheet3 and paste it in sheet1 starting at the next empty cell.
View 9 Replies
View Related
Mar 12, 2009
I have searched for my answer but because I am new to all this I am stuggling to manipulate some of the other code that is close to what I am after..
I am trying to find a quick way of summarising data from multiple detail sheets onto a summary sheet (all within the same workbook) with the number of worksheets varying (ie: I may add or delete worksheets).
I basically want a concise summary of the other detailed sheets.
My Workbook is setup as follows:
Multiple sheets detailing each individual trade (with a summary at the bottom with the basic info I need on the summary sheet).
A summary sheet totalling the profit/ loss from all trades, costs of all trades etc (I am ok with this).
A summary sheet summarising all trades - ie each of the summaries contained on the individual trade sheets consolidated onto one sheet for quick reference:
Trade #TradePositionProfit LossHold Time
1JBHLong300030
2JBHLong250020
3JBHLong200010
1WOWShort050012
1HVNLong800015
1CLXShort500045
2CLXShort250030
3CLXShort150010
What I am struggling to get onto the summary sheet is all the individual summaries on the detail sheets. The reason for this is that each trade can have up to 3 positions: the Initial trade, Pyramid 1 & Pyramid 2. (This range is in the same location of each sheet but could be 1, 2 or 3 lines) and the number of trades I enter during the month can vary (ie the worksheet number can vary).
I don’t want to have to manually update a range, of a consolidation for example, each time I add a new trade (new worksheet) & want to view a summary.
I thought it would be easier to summaries each trade at the bottom of each trade sheet so I can pick the information up from the same spot already in the format I want it in for the summary page.
Does anyone have any suggestions on how I can get the summary to search each sheet, no matter if there is 1 trade or 50 trades & pull the summary information which is located in the same spot onto the one sheet for a quick view?
View 9 Replies
View Related
Aug 12, 2009
I have an excel workbook containing 123 worksheets. Sheet1 I have titled "Summary" and I wish to copy data from the remaining sheets (2-123) into it. Each sheet is formatted in the same way, and I wish to take the data in cells E66:G130 from each worksheet and paste it into the Summary sheet (so, Sheet2's 3 columns would be pasted in cell A1, Sheet3's in D1, and so on).
I gave a couple of codes a go (this one is from a thread "Copy Data From Multiple Worksheets & Append To Single Worksheet", I tried to alter accordingly):
Sub SummurizeSheets()
Dim ws As Worksheet
Application. Screenupdating = False
Sheets("Summary").Activate
For Each ws In Worksheets
If ws. Name <> "Summary" Then
ws.Range("E66:G130").Copy
ActiveSheet.Paste Range("A65536").End(xlUp).Offset(1, 0)
End If
Next ws
End Sub
However, I don't understand what "ActiveSheet.Paste Range("A65536").End(xlUp).Offset(1, 0)" refers to - I am told there is an error with this line ("compile error expected =").
I also tried the Consolidate function, but had problems as well.
View 4 Replies
View Related
May 21, 2008
I want to take values from several worksheets within one workbook and put them into a list ie.. a workbook with 200 worksheets each one a different invoice. Each invoice has an invoice number, po number, supplier, and total. I want to create a worksheet that will list the above information from each worksheet.
View 5 Replies
View Related
Dec 18, 2006
I have been at this for days and i can't quite get it right.
I have multiple worksheets of clients all formatted the same.
I need a Macro/VBA that will take from Each sheet onto a master sheet the Name of the Client(Cell I1 from the sheet)
Under the name I need the text Authorization #: then the data(C3)
Under that I need the text Dates of Service Expiration: then the data (D5)
Then the text 90801 Balance: then the data from (C30)
Then the text 90806 Balance: then the data from (F30)
Then the text 90847 Balance: then the data from (I30)
Then the text 90853 Balance: then the data from (L30)
Then a couple Spaces then the same exact data from the next sheet...till all the work sheets are done.....
View 7 Replies
View Related
Sep 14, 2008
I have one master worksheet named "Season" and 30 other worksheets named "1,2,3,4 and so on to 30". I ideally want to copy the shapes (msoShapeOval) from the worksheets- "1-30" to worksheet- "Season". When the shapes (msoShapeOval) are copied from worksheets "1-30"
I want them to keep thier position that they were in when copied to worksheet- "Season".
The shapes (msoShapeOval) are in range "A1:AZ43" in worksheets "1-30" and would be placed in worksheet "Season" range "A1:AZ43"
View 9 Replies
View Related
Jan 3, 2014
Setup: I have 2 worksheets with between 8 and 9,000 rows on each
Column A in both worksheets Sheet1 and Sheet2 have an email address in them.
Not all addresses in sheet1 will be on sheet2 and visa versa
Column J on Sheet 2 contains a date
What I need: Column M on Sheet1 is empty
I need a formula to place into Column M on Sheet1 that will
Look at Sheet1:A
Locate the corresponding value on Sheet2:A
Pull the date from Sheet2:J same row into Sheet1:M
View 2 Replies
View Related
Dec 18, 2006
I have been at this for days and i can't quite get it right.
I have multiple worksheets of clients all formatted the same.
I need a Macro/VBA that will take from Each sheet onto a master sheet the Name of the Client(Cell I1 from the sheet)
Under the name I need the text Authorization #: then the data(C3)
Under that I need the text Dates of Service Expiration: then the data (D5)
Then the text 90801 Balance: then the data from (C30)
Then the text 90806 Balance: then the data from (F30)
Then the text 90847 Balance: then the data from (I30)
Then the text 90853 Balance: then the data from (L30)
Then a couple Spaces then the same exact data from the next sheet...till all the work sheets are done.....is it possible?
Dave responded by suggesting the following:
Sub CopyFromAllSheetsButMaster()
Dim wSheet As Worksheet
Dim wsMaster As Worksheet
Set wsMaster = Worksheets("Master")
For Each wSheet In Worksheets
If UCase(wSheet.Name) <> "MASTER" Then
With wSheet
.Range("I1").Copy _
Destination:=wsMaster.Cells(Rows.Count, "A").End(xlUp)(2, 1)
'More Copy Method code here
End With
End If
Next wSheet
End Sub...
View 3 Replies
View Related
Aug 11, 2007
I am developing a Workbook where I import data to one worksheet and then disseminate it to other worksheets. I am not sure if I am overthinking the process, but I am having difficulty writing the macro and getting it to run through the entire list of rows.
There are 4 Columns in the one worksheet, named "Update":
Column A supplies the name of the worksheet that will be updated
Columns B-D contain the data that will update the sheets.
The process that I am trying to write the macro for is a follows:
1. Select/copy the range, starting with B1:D1 on "Update"
2. Navigate to the appropriate worksheet to be update, determined by A1
3. Identify the first blank row, starting with A5
4. Paste the data B1:D1 to A5:C5 (or next available line)
5. Navigate back to "Update" and begin the process again with the next row B2:D2
This process should continue until there is no value in Column B on the "Update" worksheet.
View 7 Replies
View Related
Mar 9, 2012
Been a while since I've worked with macros within excel and I can't seem to get what I remember being a basic macro to work whatsoever. I have 2 worksheets containing a massive amount of data and need to pull some cells from one into the other when values in 2 columns match.
To better explain, sheet1 has ID numbers in column G spanning for roughly 1700 rows. Sheet 2 has corresponding ID numbers in column EO. The data I need to copy over is in columns EP and EQ on sheet 2.
So I'm trying to build a macro to compare the values in Sheet1_Column_G to those on Sheet2_Column_EO and when a match is found, copy the value in EO and the adjacent entries in columns EP & EQ over into columns X, Y, and Z on sheet 1.
Couldn't get a VB function together to save my life so I tried working with MATCH & INDEX and didn't get very far either. I've included my current function below.
=IF(ISNUMBER(MATCH(G1606,Data!$EO$527:$EO$601,0)),INDEX(Data!$EO$527:$EQ$601,MATCH(G1606,Data!$EO$527:$EO$601,0)),"Not Found")
View 7 Replies
View Related
Aug 22, 2008
In Worksheet 1, Cell B63 I would like to create a drop down menu, with two options for the user to select - 0.05 and 0.01. I would like each selection to then control the formula in the cells C63:L63, for example;
Where 0.05 selected it computes for cell C63:
=IF( COUNTA(C4:C54)=0,"",IF('WORKSHEET4'!N55>'WORKSHEET4'!L55,"YES","NO")
then cell D63
=IF(COUNTA(C4:C54)=0,"",IF('WORKSHEET4'!AC55>'WORKSHEET4'!AA55,"YES","NO")
and so on
Then if 0.01 selected it would compute for Cell C63
=IF(COUNTA(C4:C54)=0,"",IF('WORKSHEET4'!N55>'WORKSHEET4'!K55,"YES","NO")
then cell D63
=IF(COUNTA(C4:C54)=0,"",IF('WORKSHEET4'!AC55>'WORKSHEET4'!Z55,"YES","NO")
View 6 Replies
View Related
Oct 23, 2013
I have a workbook that contains worksheets. They are listed as follows:
Sheet 1ABCDEFG
In cells A1 - A49 I have text. What I would like to do is to have a macro that I can run that will basically copy and save new workbooks with sheets A - G copied over and have the new workbook saved with the file name that I have denoted in cells A1 - A49 on Sheet 1. Also, the macro would ask me where I want to save the new Workbooks.
For example, if this were Sheet 1, Column A then the cells below would be the saved name of the new workbooks and the new workbooks would have Sheets A - G in themRed
Blue
Purple
Black
White
Yellow
Orange
Green
Gray
Brown
One more piece of information, the file that is being copied and saved is large (~80MB). If there is a macro that would allow me to simply "save as' the workbook and the Saved Workbooks would be named using the data in Sheet 1, that would work as well in case copying, pasting, then saving may take more time
View 1 Replies
View Related
Aug 6, 2013
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
View 9 Replies
View Related
Jan 15, 2013
In Excel 2007, Windows 7 Home Premium, I am trying to summarise multiple worksheets into one sheet, creating a list in one column in this summary sheet that includes the cell contents from the same cell from each sheet. For example, my first sheet is called KCD183 and I want to list the value from KCD183 Cell A2 in my Summary Cell A2, then show KCD184 Cell A2 in Summary Cell A3 (i.e. the next row down). So my Summary sheet will list all cell A2s from all my sheets, 1 after the other down column A and will continue to add these for any new sheets I add.
I realise that I could just export the spreadsheet to Access and report on it from there, but I don't have the software!
View 4 Replies
View Related
Jan 19, 2012
I have data in some of the cells within range A26:A39
These cells are populated via an IF function on another worksheet. Even though the cells appear blank (as in the value returned is ""), there is a formula in these cells. I think it's called formula blank?
I am looking for a way to copy the data from the cells within the range which are not blank (ie: not = "") and paste this data elsewhere on the sheet in a list with no blank spaces in between.
I anticipate that there will be 4 non blank cells within this range.
Ideally I would have data from the nonblank cells copied and pasted to cells
A40
A41
A42
A43
View 5 Replies
View Related
Apr 11, 2008
Tried to write a Macro to Range Cells in a sheet, setting the range values from a another cell. I have encounted a Run-Time error as select method of Range class failed. Below is the Macro.
Sub Macro1()
Dim r1 As Range, r2 As Range, myMultiAreaRange As Range
Worksheets("Pre").Activate
Set r1 = Range("J4")
Set r2 = Range("K4")
Set myMultiAreaRange = Union(r1, r2)
myMultiAreaRange.Select
Worksheets("Data").Select
Range(r1, r2).Select
Selection.Copy
Sheets("1").Select
Range("B5").Select
ActiveSheet.Paste
End Sub
Have the Ranges been set incorrectly
View 5 Replies
View Related
Feb 18, 2014
I have data from (row 1, column 1) to (row 53, column 5) on 283 consecutive worksheets in a singular excel file that I would like to be presented on a singular worksheet starting from the data on worksheet 1 and descending to the data on worksheet 283.
I am looking for a copy and paste loop solution that will copy the data from each page and sequentially paste the results on a singular output page in descending order (worksheet 1 data, worksheet 2 data... etc) so that I can sort the data.
View 1 Replies
View Related
Jan 8, 2008
I wonder - is there a way to copy the green range over the filtered cells in col. C !? (I want to Copy range D20:D23 on to cells: C5, C9, C13, C17). I tried to select "Visible Cells Only" as the target for Pasting onto (using [F5] etc...) but no success. I prefer a solution that does not involve VBA. *** see attached picture.
View 2 Replies
View Related
Mar 19, 2008
1. I have two workbooks (eg. workbook1 and workbook2)
2. I compare the cell values in workbook1.sheet1.cell range (d6:d20) and workbook1.sheet2.cell range (d6:d20).
3. If the values in the range of cells are same, I want to take the value in workbook1.sheet2.cell range (d6:d20) and copy to workbook2.sheet1.cell range (d6:d20).
View 6 Replies
View Related
