I have a few macros that run until line x currently. I've tried to incorporate xl down into my macro but must have misplaced it. I need to paste until the last line of text in column B.
Sub vlooktest()
'
'
Range("C4").Select
ActiveCell.FormulaR1C1 = _
"=VLOOKUP(RC[-1],'Raw List'!R1C1:R26000C9,3,FALSE)"
Range("D4").Select
ActiveCell.FormulaR1C1 = _
[Code] .......
I have 4 sheets called Data, xxx, www and yyy. The sheet names xxx, www and yyy are also words that are existing in the sheet Data in Row C. Am I able to copy paste all the lines existing in the sheet Data including i.e. xxx in Row C into the sheet xxx? This should also work for the words www and yyy.
View 9 Replies View RelatedOur small family business has a mailing campaign that we track with excel. However, we're very concerned about users opening the macro-filled master spreadsheet. Instead, we'd like a macro to do everything for them.
When a letter comes back in the mail with a bad address, the user types the Street number and street name such as "1234 Main St" into $A2 of c:dropbox eturned.xlsm, presses the macro button, and it should do the following:
Opens and Searches "Sheet1", "column S", in the file c:dropboxmaster1.xlsm, and finds the LAST instance of the address typed.Selects that entire rowCopies the entire row.Pastes the contents into the row of the active cell in the destination spreadsheet, overwriting what was there before. Such as $2:$2 if the address was typed in $A2.In the master1.xlsm spreadsheet, sets the entire copied row color to "gray".closes master1.xlsm and saves changes.
The end result is that the user now has an identical row of information in their spreadsheet, and the master spreadsheet's row is colored gray indicating it has been completed.
Other notes:I'm open to more efficient steps than this if you have them.There are approx 5,000 records to search through in master1.xlsx at any given time.
I have a spreadsheet where on a weekly basis data is copied in to various tabs. I then have a "formula" tab where I have a single line of formulas which look up the various data tabs and extract the results I want to show.
Currently each week, before I import the new data into the various tabs, I copy the last row in the "formula" tab and paste to the line below it. This contains all the working formulas. I then paste values only on the line that I copied, thus "locking in" the values it calculated with that weeks data. This means that each row then contains the results with that week's data, and this will grow week by week.
What I am looking for is a formula that automates this process. So let's say that row 30 is the final row of data on my formula tab, it contains the formulas I want to use. I would need a macros that does the following:
1. Looks up last row (row 30)
2. Copies last row (row 30)
3. Pastes to next empty row (row 31)
4. Pastes values only to second last row (row 30)
I'm not too great with writing macros, I've found plenty that can find the last row, but I can't get them to work to highlight that row.
I have a workbook with many sheets in it. Within each sheet there is a cell with the Text "March 09" there are then 3 cells to the right of this cell with relevant information. Is there a Macro that can search for this text March 09, then copy this and the 3 cells to the right of it and paste special this information 1 cell below for all 4 cells.
View 2 Replies View RelatedI want to copy text from a range of individual cells and then paste all of the individual cells copied and paste this data into a single cell with all the text separated by hyphens between the texts.
Example attached
If you are a macro writer i have a project that i need to complete. you will be compensated for your time.
Let's say sheet - "delivery" - has a row1 that includes all possible delivery days. So A1 is 1.9.2013, B1 is 15.9.2013, C1 is 1.10.2013 and so on.
I want to make a macro, that will gradually go through whole row 3 in sheet "delivery" and look for "A1" date in sheet "Orders". Sheet "orders" have for example in column B the date of delivery, and in column C product of the delivery.
I want the macro to find all deliveries with "A1" date, and paste all products that will be delivered on this day under cell A1 (sheet delivery). then move on to the cell B1 (sheet delivery) - find all orders in sheet orders, that will be delivered on B1 date, and list all products with this delivery date under cell B1 (sheet delivery).
Example:
Sheet order
A
B
C
Date of delivery
Product
1.9.2013
orange
[Code] ........
Unfortunately simple Pivot table is not able to do this simple list.
I have a workbook with two spreadsheets. Sheet 1 is "working data" and sheet 2 is "Solution" As the title suggests, in sheet 1 is where all my calculations are performed, then it is pasted into sheet 2 and formatted. My issue is I need the information from "working data" to be copied and pasted into "Solution" but the information from "working data" will have a variable amount of rows (currently there are over 10,000, but their could be a few thousand more in any given month. The copied range from "working data" will always start in cell A1 and then should select all rows down until it finds a cell in column A empty, then the data should be pasted into "Solution" starting with cell A40.
View 3 Replies View RelatedI would like to copy several cell entries from one worksheet ("Entry") and paste then into a new line of another worksheet ("Contact DB") which will serve as a repository/database. Ideally, I would like to clear the values in the first "Entry" worksheet once this is done.
The thing that is throwing me off is that the data entered into my first "Entry" worksheet is not all on one row. However, I have recorded all the starting point references and destination cells (i.e. "B2" from "Entry" --> "A5" of "Contact DB") so it's ready to go into code.
Using the following code (which I tested for copying and pasting the first cell of interest) but I can't seem to get it to work:
Code:
Public Sub Macro1()
Application.CutCopyMode = False
Sheets("Entry").Range("B2").Copy
Sheets("Contact DB").Range("A5").Paste
End Sub
I'm brand new to vba so I'm struggling to understand the code and where it goes. That brings me to Q2 (and a dumb one it is). Where do I put this code? I already have one bit of code (for allowing multiple entries in a dropdown list) for the "Entry" worksheet under the "Microsoft Excel Objects" folder. Is this where this copy and paste could would go too? Or do I need to insert a "module?"
I had the following code that worked great with Excel 2003, but I receive an error with Excel 2007.
Dim Master As Workbook
Set Master = Workbooks("Master.xls")
For Each wb In Workbooks
wb.Activate
If wb.Name Like "S04*" Then _
If Not Range("A2") = Empty Then _
Range(Cells(Rows.Count, 1).End(xlUp), Range("A2")).EntireRow.Copy _
Master.ActiveSheet.Cells(Rows.Count, 1).End(xlUp).Offset(1)
Next wb
I receive error 1004 "application defined or object defined error" when it tries to paste to the "Master" sheet using the the above lines.
Is there something in the formatting that has changed with 2007? I'm guessing I have to slightly change the line in bold.
I have a workbook with ~80 sheets. One sheet is a summary sheet containing data from each of the other sheets. The formula to display the data is pretty easy, but I need a function to copy the formula but increment the worksheet reference in each cell.
For example:
the formula in one cell is ='17'!$AI$6
The next cell should be ='18'!$AI$6
and so on...
I have about 12 columns like this, so I really don't want to edit each of them individually.
How do I paste text from a column into a diagonal line of cells (i.e. A1, B2, C3, etc.)? Additionally (and this may be related), how do I get the cursor to move to a diagonal cell after an entry? (as opposed to down or to the side)
View 2 Replies View RelatedI would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
I have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
I have a spread sheet with Column A = Document number, Column B = revision.
I am trying to get a macro that, when run, increases the revision letter in column B. The problem is that we do not use a few of the letters such as I, O, P and Q.
I thought it would be best to have a table of the used revision letters (Say in Z1 to Z40)
Look at the text in column B of the row currently selected and find it in the Z1:Z40 table
Move one cell down the Z1:Z40 table and copy that text back into column B on the row initially selected.
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
I want this macro to find in this case "406" in column A which is at the very end of the last block of 160 rows of information.
I then want it to move up 159 rows and copy 160 rows of information underneath the last block of information.
i.e.go to A5280 , then go to a5121, copy rows 5121:5280 to 5281.
It falls over on the very last line of code I can see A5281 selected but it won't paste....
On sheet1 have multiple groups of cells with drop down lists all with the default word "None" selected. After the user has gone through and changed some of these menus to other values in the lists, i am looking to copy the text only in the cells that have been changed to certain locations on sheet2. See attached spreadsheet for a better idea. If any additional info is needed.
View 5 Replies View RelatedIf a cell contains the formula =b1 and the result shows as zero;
Is there any way of getting the text "=b1" in a cell next to it instead of zero?
We have a template sheet we use which has a sheet formatted as 'text' - it msu remain this way for another purpose.
We wish to copy information from other sheets/places and paste into the template sheet - but have it as text (with green triangle on it)
I have tried copy and pasting (the sheet is already formatted as text.
I have tried copy and paste special as values but to no avail.
(I have attached a small example which shows the template, data to past and end result of what I require - the redtab sheets are attempts to paste!
I know there is a really simple solution but I cannot for the life of me see it!!!!!!
Please help! Auto Merged Post;I kept searching and have found a way to do it on 1 column...
(Data/Text to columns....text)
- but how do you do it over a sheet that contains say 120 columns (i.e.: en masse)..???
I copied and pasted text (last names) from Website A into File A. Then did the same from Website B into File B. I wrote index match formulas to compare columns between files. I've done this literally hundreds of times, and it's always worked. This time, however, I get ZERO matches - even though there are lots of them. Troubleshooting was straight-forward: it has to be website B. (Strange thing is, I HAVE used text from website B before in similar applications with no problems.) Something in the way they present the data is preventing matches. (Everything works when I manually type over text from Website B.) It's not an upper case/lower case problem. I tried copy-pasting values only - to no avail.
View 4 Replies View RelatedI have a drop down list. When I choose something from the list, it creates a description (text) in the next cell. I need to be able to copy/paste the text from the cell, but it will only let me choose the formula instead.
View 4 Replies View RelatedFinding any specified Text like "Cube" down a specified Column in this case "D" when Text has been found
Copy the 24 cells directly below and Then Paste to G1.
Example: A1, I go to school (001). I would like to copy only (001) and past to B1. like that and process to the last row of A1. or I would prefer manual last row.
View 9 Replies View RelatedI have a cell that contains various data but in the cell there will be a string of characters that will begin with either ON or TN followed by numbers. What I would like to do is have the sheet look at that cell and if there's a TN12345 (or any combination of numbers) or an ON123456 (same idea as the TN) I would like the sheet to pull just the ON or TN number out and paste it in a specific cell. The ON would have it's own cell to be placed in as would the TN.
Here's an example. C5 contains various data, a mix of text and numbers but it will have either an ON or a TN or both. I would like the sheet to automatically pull the TN number out and place it in A5 and the ON in B5. I would like this process to repeat all the way through the sheet to the max amount of rows since I have no way of knowing how many rows I'll need. Can this be done with a simple IF formula or does it have to be done in VBA or is it not possible at all.
I have a workbook that writes what I need to do. When done I need to type in another sheet the exact same text and the date I did it.
I wonder if its possible to add a checkbox and when this checkbox is pressed it will automatically copy/paste the text to the next free cell of the other sheet, so I only need to type date.
Here is the workbook: [URL] .....
Check box would be added in cell A17, A18, etc.
And the text would be copied to sheet Preventive Maintenance Records in the next available cell in column A.
Essentially, I have 2 Sheets:
"SheetWSS" = data to be copied
"SheetWSD" = destination of copied data.
Below is a sample of the data in "SheetWSS"
----------A------------------------B-------------------------C
1------Trade ID -------Description---------System no.
2--------579----------------Loan ---------------------- 7
3--------580----------------Deposit---------------------22
4--------702----------------Deposit--------------------- 11
5--------703----------------Loan ----------------------- 58
6--------732 ---------------Loan------------------------66
7--------733----------------Deposit-------------------- 99
etc...(no more than 10000)
Now, an explanation of the data:
1) I work for a small bank (CORP) that takes deposits and gives loan.
2) CORP books these trades using only system no. 7 and 11; other system nos. belong to customers.
3) When a single trade is booked, the 2 sides of the transaction is recorded (by Trade IDs) . E.g rows 2 and 3 relates to one trade. So if CORP loans money with system no.7 to CUSTB, who uses system no.22, it shows for CORP a loan and for CUSTB, a deposit.
4) Everyday, the data in "SheetWSS" is updated with a different number of rows from previous, but the number of columns remain the same.
So, here's what i'ld like the macro to do:
1) Go into Column C, find system no.7 and 11.
2) For each 7 and 11 found, Copy the next row . So if for e.g, system no.11 was found in C4, i want the ENTIRE ROW 5 to be copied.
3) Paste the entire next row in "SheetWSD" until we have a list of all opposing sides of the same transactions initiated by CORP.
I have the following script to copy values from one sheet to another, is there a text version of this script, to copy text rather than values without having to copy and paste.
Code:
Sheets("WS2").Range("A1:a65000").Value = Sheets("WS1").Range("a1:A65000").Value
When VBA copies from a .csv spreadsheet to an excel spreadsheet, the days/months in the date become reversed. So 12/5/2009 becomes 5/12/2009.
View 3 Replies View RelatedI thought I may of been able to get away with just using a simple macro which I could duplicate to copy all the cells in a column between 2 and 251 and
pasting them to another column on another sheet and it only referencing the available text within the first column, but it would appear to be referencing the
blank cells as well, which is creating errors for another function using this column.
So ideally I would like a macro to copy just the text data from a column within the range (F2:F251) on worksheet "Expansion".
All the cells have formulas in them which create a unique text string from other cells on the same sheet.
Not all the cells within the column will be populated with text strings at the same time, but the rows of text will always start at "F2"
and fill down without blank cells between the list of text strings.
The list of text strings will then be copied over to a different worksheet "AG-1" and pasted into column "A" starting at cell "A2".
This function is then repeated 14 more times for (G2:G251) through to (T2:T251) each pasted to different
worksheets "AG-2" through to "AG-15" respectively, in column "A" starting at "A2".
The first column to be found in the process with a blank cell in the starting row of that column, would deem the process complete. Otherwise continue the
process through to column "T".