I am using the following code to copy data from multiple tabs to a summary tab - it is only supposed to copy the data in the rows if the cells in Column A have data in them, its working, but for some reason it is copying the data in columns Y and Z for four extra rows even though there is no data in column A for those rows.
View 5 RepliesI have a workbook that updates from external source and creates sheets depending on a cell range.
I have put tab 1 and tab 0 on either end of where the new sheets will be inputted, will never know how many sheets
What i need to happen is if someone fills in "complete" in A7 in my "summary" sheet then the values in row 6 in all the other sheets get hardcoded. This needs to happen from A7 down to A26, so A8 = complete then copy row 7 etc
This is what i have so far
I get compile error here ........Sheets(ArrSh(1)).Activate
Also need it to work for all the other rows.
Sub hardcode()
'
'Sheets("Summary"). Select
If Range("a7") = "complete" Then
'
Sheets(Array("1", "0")).Select
Sheets(ArrSh(1)).Activate
[Code] ......
I have a worksheet with a list of project managers and a bounc of data on them.
How can i make a new file with sheets for every project manager in the list and copy the data for each one into his own sheet ?
Every project manager has many lines (there are about 200 managers and 30 000 lines and 30 columns )
I have managed to create a sheets for project managers from a list of unique entries but that's all.
I have a workbook that contains multiple sheets, currently five sheets of which only two of them are Info Datasheets.
I would like to create a VBA code that pulls data from multiple info datasheets and compiles that data into one Main Database sheet. However, after that initial collection, I need the code to maintain the rows data. Specifically, if any row's data changes in the info Datasheets I need that row on the main Database sheet to update.
The columns in the info datasheets range from A:AH, however I only need the columns A:E to be copied. And I would like the code to add column F in the main datasheet displaying the sheet name were the data was retrieved
Each Info sheet (Metals, Polymers) are setup identical; Rows 1:3 are the headers, and Column D and/or Column E will denote a change to the row.
The Main Database sheet (Table of Context) has 2 rows for the header. So, the data will start on row 3
F-S886 (Material Properties Database)_DRAFT_5.xls
trying to copy data from multiple sheets to one single sheet. I am pretty sure this is possible. The problem I am running into is that the number of sheets at any given time is dynamic. The numbering of the sheets is from 000 to 999 (they must be a three-digit code). The other issue I am having is I only want to copy the rows in each sheet that have an "x" in column "A". Also, the row in which the first "x" occurs can differ from sheet to sheet. I have attached a copy of the spreadsheet that indicates how the spreadsheet is layed out.
View 13 Replies View RelatedI have multiple .xls sheets in a folder. C:Documents and Settingsu369875DesktopProject stuffTestin Save_ASCompleted History. And need to copy the data in all of them and paste them into a new sheet (one main sheet) in this folder...........
View 2 Replies View RelatedI recieve a daily spreadsheet with ~25,000 rows of data and is 4 columns wide. Each day I need to break the data equally up into 19 or 20 different sheets within the same workbook. This is very time consuming as I need to copy the first ~1,000 rows and paste it into the first sheet, then I need to take the next ~1,000 rows and paste it into the second sheet, and so on.
I have attached a small example with desired output. In my example, the raw data file contains 19 records. For these 19 records, I need to distribute the records evenly between 5 individual sheets. In this case, each sheet will contain 4 records or less.
I have a workbook with 10 sheets.
Each sheets has data starting row 14 and column B with row 13 being column Headers.
I want to copy data from each sheet, having column headers suppose A, F & G in to a single sheet. The position of column headers I want to copy are different in each sheets
Means macro will go to sheet1 first, he will copy data from column headers A, F & G and paste in new sheet suppose main.
then macro will go to sheet2, he will copy all the data from column headerA, F & G and paste it in main sheet after the last used row and so on.
writing a macro that could save me loads of time. In the attached file there are 2 separate sheets of data ( named "Elements Innovation" and "Dinttap") that I need copied, pasted, transposed and consolidated into one master sheet (named "Desired result"). Note that the fields that relevant cells are highlighted in yellow. In reality I'll have many (~100) of these sheets that I need the data extracted from, and the work looks like it can be automated using VBA to speed things up.
View 2 Replies View RelatedI am trying to create a macro that will copy data from one sheet to four other sheets depending on some requirments in the data. I have a main worksheet that will store the data, the name on this sheet will change daily, so you cannot use a "named" sheet in your macro. The other three names of the sheets are "Esky", "Indy", "Gfld", and "Other". When copying the data, I need to copy the entire row of data to the required sheet. The data comes in such as:
MZ03948 134 126.23
PZ34533 128 12.28
IM04985 630 198.50
Z109384 40 35.65
2130494 76 12.28
2236326 12 45.63
5123132 12 12.23
Based on the FIRST TWO characters in the first column, I need to copy the data to the specific sheet. I would assume a simple LEFT() function would work for this. Here are the requirments for each sheet:
Esky - "MZ" or "51"
Indy - "IZ" or "Z" or "21"
Gfld - "PZ" or "22"
Other - Anything else
I have been trying to make a code that copies all the data in A2:K50 in all the sheets (about 32 of them right now) and paste that information in 1 sheet (Master List). The code does work but for some sheets it only copies the first 2 or 3 records. Also, this code puts the name of the sheet the data came from but for the first 2 records in puts in the Master List its pasting the wrong Sheet name.
Sub SummurizeSheets()
Dim ws As Worksheet
Dim lastRng As Range
Application.ScreenUpdating = False
Sheets("Master List").Activate
I have multiple sheets Names(Sheet1-Sheet5).
Im trying to compile them all on the same sheet (Main Sheet). But each sheet is NOT the same. I need to choose what Columns needs to be copied (I can use one macro for each tab if needed)
For example I need Sheet1, Columns (A,C,E,G,S) copy that and then go to (Main Sheet) and paste in the next blank line (column A)
Seems like it does not know where to paste.
Here is one I have tried ....
Following is my query:
There are two workbooks , Workbook1 and Workbook2
Workbook1 has only 1 sheet (Sheet name is Final) with multiple rows Tiger,Lion,Goat etc..
Workbook2 has multiple sheets (Tiger,Lion,Goat .... so on)
Each sheet Tiger, Lion, Goat has different no of rows but same no.of coloums.
I want to copy the data from all the sheets in Workbook2 to one sheet Workbook1
ie., once i execute my macro the final output in Workbook1 should contain Tiger under that all the rows from sheet tiger(Workbook2),Goat under that all the rows from sheet Goat(Workbook2) ,Lion under that all the rows from sheet Lion(Workbook2).
Here rows should be inserted in Workbook1 and in these inserted rows we should copy data from respective sheets of Workbook2
We have a company and need to automating workflow.
The Master sheet contains incoming mail details by customer. Each employee is assigned a set number of customers to respond to. We want the information on the Master sheet to filter to a specific employee assigned sheet. On the employee assigned sheet, once filtered, they are to provide updates in column E
Date
Reference no.
Name
Employee ID
16-Feb-12
S/S/1
[Code] ........
We need a macro that can filter customers' details to the specific employee assigned sheet based on the employee ID in the master sheet. For example, all customers assigned to DW (i.e with the 'DW' employee ID) filters into a sheet called 'DW'. Please note that the Master sheet is a continuous log updated daily. This macro must not duplicate information previously filtered once the employee enters a status update in column E.
What i want to do is copy all records from whatever date i enter, onto sheet test. The full excel file has over 80 worksheets for each individual rep, the example i attached has 8 sheets..
View 9 Replies View RelatedI am trying to come up with the most efficient way to copy data to multiple sheets within the same Excel workbook. The original data exists within one column on a summary sheet (could have up to 500 individual entries). I want to copy each individual entry to a unique sheet (that already exists), but in the exact same cell location within each sheet. I would only want to copy the original data value and not any formatting. Is there an efficient way to do this?
In my example spreadsheet, the original data is on the SUMMARY sheet. Sheets A through J would be the target sheets, with cell B2 as the target location for each of those sheets. My example shows the result of a manual copy paste value process, but I am hoping to automate that.
I have a workbook with 26 sheets, labelled A to Z. Column A in all the sheets have names from rows A6:A35.
I need a macro or a code to extract all the names from each of the 26 sheets and paste it to a new sheet 'Names' under column A, such that names starting with 'B' paste under all the names 'A' and so forth till 'Z'.
I am looking for a code that would copy the data from each worksheet in a given workbook and then paste to just one worksheet within a different workbook. The Sheet names are auto generated when I run this canned report but the naming structure is always the same...the first worksheet is named Repair Details and then the next sheet is named Repair Details_1, the next sheet is named Repair Details_2 and so on for every sheet in workbook. So I would like to copy all of the data(Headers to last cell) and then paste in a worksheet(ex: Master Repair Report.xlsx and the worksheet could be titled Master Repair Details) on a different workbook, then the next sheet would copy from the one under the header to the last record and paste to the same workbook. This process would repeat for every worksheet in the Repair Details Workbook and paste to Master Repair Details worksheet in the Master Repair Report workbook.
View 4 Replies View RelatedI've got several worksheets that all have the exact same layout that a user will enter unique information in to each worksheet. Then I've got a final worksheet that I want to have a button that the user can click and when they do, it will look to each worksheet and do the exact same process for each worksheet as follows:
It first looks to see if the worksheet is visible. If it is, I want it to copy the range A5 to K5 down until it gets to the last non-blank cell in column C. The first non blank cell that will be referenced will be C7. Then I want it to paste this information into the range A5:K5 on the final sheet named Sheet8 with the same values and keep cell formatting such as width and height, font. If the worksheet is not visible, it skips the sheet.
I want it to do this for each visible worksheet, placing the next visible worksheet info under the previous visible worksheet info. My current code as shown doesn't do that. It requires that something be inSheet8 A6 before it will even paste, then it pastes the info from A5:K5 but it doesn't do just the values nor does it keep the formatting. What I mean about not doing just the values is some of the info that needs to be copied comes from a drop down they can choose from and it copies the actual drop down menu. Also, it seems to copy all of the ranges from each sheet and paste it into just A5:K5 on Sheet8 and overwrites each other instead of pasting Sheet2 just below the information from Sheet1. So the only information shown after the entire process is completed is the information from the last visible sheet.
If Worksheets("Sheet1").Visible = True Then
Sheets("Sheet1").Range(Sheets("Sheet1").Range("A5:K5"),
Sheets("Sheet1").Range("C7").End(xlDown)).Copy
Sheets("Sheet8").Range("A5").End(xlDown)
End If
[Code]...
I would like to use VBA to search a folder and copy data from tabs within the excel files there. The data will be pasted to a tab of same name in the the main file. All the files are in the same format.
So far I have only managed to list the files in the folder using code I found on your site!
i have a one file with differant sheet like Sheet name are as below:
Total sales
sale1
sale2
sale3
sale4
sale5
sale6
sale7
There are a same title & Column in all sale sheet data like: Date,Name,add1,add2,DOB,city,state,username,Comments and Status.
In Total sales sheet: There is a one "All Data Get" button. when user click on button then All sales sheet data come in total sales sheet.
Basically I have 12 sheets of data, if column H (in any of these sheets & rows) has a currency value greater than 40;
I want to copy the entire row/s to Sheet16 named "Major" - which has the exact same columns and formatting. I need this to be automatic.
What code do I need, where do I put the code?
I am looking for some code to copy the exact values in a couple sheets over to a new workbook. There are images in the sheet that need to come over and formatting of cells including merging.
View 2 Replies View RelatedI would like to create a formula on sheet 1 and be able to copy and paste it to 20 sheets in the same workbook.
View 2 Replies View RelatedI have different *.xls files containing one sheet with different data. I tried to make a macro whose job was to copy all data from different files into one file *.xls but i failed .
View 7 Replies View Relatedi am trying to do the following- can some one pleeeeeeease help me
Each tab has columns up to M.
1. Sum Column E for each tab(note column will varie in size)
2. Then copy Column C and Column E to one tab (called " upload)
there will be 60 tabs - so am tying to loop through and peform a subtotal for column E then copy "C" and "E" to another tab called "upload" note - all tabs will be copies to the one tab called "uplod once subtotal is performed.
This Macro works fine to copy data from multiple sheets into one master sheet, but it is also copying the formula. How can I change this Macro so that it is copying and pasting VALUE only?
Sub Combine()
Dim J As Integer
On Error Resume Next
' work through sheets
For J = 4 To Sheets.Count ' from sheet 3 to last sheet
Sheets(J).Activate ' make the sheet active
Range("A10").Select
Selection.CurrentRegion.Select ' select all cells in this sheets
' select all lines except title
Selection.Offset(1, 0).Resize(Selection.Rows.Count - 1).Select
' copy cells selected in the new sheet on last line
Selection.Copy Destination:=Sheets("Combined").Range("A65536").End(xlUp)(2)
Next
End Sub
Following problem:
I have a workbook containing data about some students grade on different sheets (4). The structure is almost the same on every sheet:
The first 2 row contain headers the each row contains a name and result for different test:
name - test A - test B - ...etc.
Peter - 90 - 60 -....etc.
there are 25 columns on each sheet - 4 sheets in all.
What I want is, to consolidate each students results in a separate workbook.
I have the following data in one "Project_list" tab:
Project
AAAA
BBBB
CCCC
DDDD
I want to copy this data into another tab "Transpose" in this form:
AAAA
AAAA
AAAA
AAAA
BBBB
BBBB
BBBB
BBBB
[code].....
So basically copying 4 times every row... as simple as that The constraint: I have about 1500+ projects in the project list, but this list can change so i need a statement that copy values 4 times till source tab has empty values. I would like to have in the second column the following serie for each project.
AAAA Q12014
AAAA Q22014
AAAA Q32014
AAAA Q42014
Note- i want to do this in VB not though formulas as i am doing other derivations in macro.
I have managed to pull together code that does the required task - save two sheets from a work book in to a new workbook on to a dorectory each day. However I woul;d liek to paste special the values and cannot figure our how to reference that on the below:
'saves text file in day on day folder
Dim WS As Worksheet, CheminDest As String, fNAME As String
'create directories as needed
On Error Resume Next
CheminDest = "T:DMRatesReportsChecks" & Year(Date) & ""
[Code] ..........