My VB code creates a number of sheets when processing and all works well until I have to create more then 65 sheets and then it stops running with an error 1004. The VB code creates each new work sheet via vb "copy" command.
I assume there is nothing magical about this 65 number - its just the point where excel runs out of memory, maybe?
I found a reference to this problem and a suggestion that I have the code periodically save the work sheet but this seems like a kludge?
The sheet is actually being added to the workbook, seemingly before the error. I resume the code, and a new sheet is placed in the workbook and it errors again. The Debugger stops and highlights on the code above.The sheet count number was 10895 at the error, just as an indicator of how many times the simulation has performed successfully. I am hoping this is something I can fix without having to start over...
I'm trying to set up a macro that will capture all the unique values in a column, and then create a new sheet for each value. What I've got so far technically works, but it's also adding an extraneous sheet (with a generic sheet name, not the specified name I'm giving the sheets) and also giving me "Run-time error '1004': Application-defined or object-defined error" when it runs.
I created several macros objects to do simple hide columns, filter on, filter off, etc. type functions, using the Tools / Record Macro feature. Then discovered they won't work in a protected worksheet. Is there a way around this situation, other than turning protection off? Here's an example of the code for one of them, although I get the error or every attempt to perform a macro once the sheet is protected:
When I run this code I get a run time error 1004, copy method of range class failed, I have an autofilter on and it is showing 5 rows, the 5 cells in column A of sheet2 gets copied to sheet1 OK but I get the error?
I am getting the following error: Run-time Error '1004': Copy method of Worksheet class failed. after adding 53 worksheets to a workbook using VBA. I found several posts concerning this error in the forum. However, I did not find any responses that address the root cause or provide a solution.
I'm using Excel 2013 and I'm getting an issue in vba I can't figure out. (This is something I've done several dozen time before) But everytime I try to copy a sheet in a workbook,
Basically my code is bombing at the red highlighted code. Error: "Run-time error '1004': Copy method of Worksheet class failed"
Sheet "Blank Form" is a hidden sheet. Can I alter the red section of code to work while being a hidden sheet? I tried a few variations but nothing seems to work..
the if stattement works perfectly and does exactly what i want except when it comes to the else part. if there is no error the statements are run perfectly but if there is an error (in this case the error is generated when a match cannot be found in the spreadsheet) the else statement doesnt kick in and post the msgbox. the code just crashes. and returns an error 1004 on the line i have highlighted in yellow
res = WorksheetFunction.Match(invvar, Columns(1), 0) If Not IsError(res) Then
Before I go into details I am working in one workbook with several worksheets(Tabs) in the workbook. I have three Buttons on one tab. the button I am having trouble with is the third. I want to insert a column in a separate tab that contains approximately 87,000 rows of data. I then want to do a row count and select the empty cells in the inserted column and put a formula in there. I have tried a loop VBA code and it works, but it takes about 30 minutes to run all the way through. The underlined portion is what is higlighted with error 1004: Application-defined ro object-defined error. I am not sure how to fix this. This is what I have now:
A , Method of Range Object "_Global" Failed , error occurred upon running the code below at the emboldened statement.
Code: Sub copytosheet2() Dim Lastrow As Long, CopyRng As Range, DestRng As Variant, i& Worksheets("Sheet1").Activate Lastrow = Worksheets("Sheet1").[A65536].End(xlUp).Row ' For i = Lastrow To 2 Step -1
[Code] ......
The goal is to loop through columns of data on sheet1 and copy values of cells B-C to the lowest rows on sheet2 column B-C.
Trying to be slick with my macro I have 2 sheets collecting data in a workbook. I am attempting to send as attachments only those 2 sheets. I am getting an error at the following space within the code. How do I get around this?
Code: Sub Send_to_Me()
' Send_to_Me Macro Dim objTemp As Object Dim FileExt As String Dim TempFileName As String Dim FileFullPath As String Dim FileFormat As Variant
[Code] ......
This is the line that I get with the message above. It is only 2 sheets. Excel 2010 Windows 2007
I'm using VB 6.5 and Excel 2007. I've got a workbook that has code that creates another workbook (by copying sheets out of the current workbook) and drops a button on that workbook and creates a macro for that button. Everything works except one thing which gives me
Runtime Error 1004: Unable to update the Caption Property of the Button Class.
If I run the code manually (rather than calling the subroutine from from within another subroutine) it runs without error but if I call it from within the subroutine that copies sheets from the original workbook to a new workbook I get the error. Any idea why this might be? What I might be doing wrong? The code for this subroutine is as follows:
Sub CreateButton() Dim btnMyButton As Button Set btnMyButton = ActiveSheet.Buttons.Add(460, 75, 140, 30) btnMyButton.Caption = "Delete and Update Charts and Lists" End Sub
I have a relatively complex report that I work with and a worksheet is no longer required. I have deleted the worksheet and reference to it hwoever when running the macro to pull all the data, it gets to the summary of all the data and i get the Run Time Error 1004 Application-defined or object-defined error pop up. ON reviewing it, it is on this line ActiveCell.Offset(0, 0).Range("a1:a" & Range_Height).Select of the below code...
VB: Sub GetRangeName() Sheets("TOTAL").Select
[Code].....
use code tags around code. Posting code without them makes your code hard to read and difficult to be copied for testing. Highlight your code and click the # at the top of your post window.
I have a simple function below to put in different forumlas in different cells to get stock quotes. When I run this I get runtime error 1004 application-defined or object-defined error. The first formula goes through but vba chokes on the next formula: ActiveCell.Offset(I - 1, 4).Formula = username
I am trying to copy the info from one workbook to another workbook.
I keep getting the above referenced error...
Private Sub CommandButton1_Click() Dim filepath As String filepath = Range("A100") MsgBox ("File Appended") Workbooks.Open (filepath) Windows("CorrespondenceMaster.xls").Activate Sheets("Sheet2").Select Range("DesNo", "LocationPath").Select Selection.Copy Windows(filepath).Activate Range("A2").Select ActiveSheet.Paste End Sub
I have a sheet that will force user to enable macro before revealing the sheets and enabling them to key in data. But because I need to protect the workbook from user deleting sheets and also having some locked cells. I got the run-time error 1004 unable to set visual property of worksheet class
Is there a limit on the amout of pictures you can use with the statement me.pictures.visible? Reason being, I am trying to import 119 pictures into a spreadsheet. When the information is selected form a drop down list, it pulls up the 1 of the 119 pictures. I was able to get 54 pictures input. Everything was going great until the 55th. When it stared giving me an error... ______________________________________________ Runtime Error '1004':
Unable to set the Visible property of the Pictures class ______________________________________________
When I select Debug, it takes me to the line with Me.Pictures.Visible = False
Everything seems to work fine until I enter the 55th picture. If it is that, is there a viable work around?
the problem I'm having is that when trying to copy the value of cell A2 and paste it in cell A4 with (INSERT with the second button of the sheet). this give me the error RUN TIME ERROR '1004 '.
Getting a error message when opening a workbook "Runtime error 1004" I dont know much about excel and the user explained it to me as best she could . Here is where the script bugs:
I'm trying to create a macro that will take a worksheet from an Excel workbook, and save it as a text file, with the name determined from user input, and the location being the desktop of the currnet user's computer.
First I use a function, (provided by RoyUK), to get the name of the current desktop, then I try to use that name, along with my user input, so save the file. Obviously, it's not working, or I wouldn't be here. I get a "Run-time error '1004': The file could nto be accessed". I think it's just a syntax issue with the file name, because debug takes me to the "SaveAs" portion of the macro.
Im almost finished my first code where the basic idea was to make activecell.name=activecell.value in the first column for the first 3 sheets. After messing with it i figured i couldnt have spaces in the cell name...then i learned i couldnt have random '()-'/ either. So i have the code formatted to do that and then its supposed to call to rename everything as well. but after the 1 sheets column is renamed the 2nd sheet gets error 1004 when range("A3").select is hit. What gives?
This is what ill be using the code on
[URL]
Here is the code
Code: Sub RemoveChars() ' Works through first 3 sheets ' Sheets(1).Select
