Excel 2010 :: Runtime Error - Copy Method Of Sheets Class Failed
Nov 15, 2013
Trying to be slick with my macro I have 2 sheets collecting data in a workbook. I am attempting to send as attachments only those 2 sheets. I am getting an error at the following space within the code. How do I get around this?
Code:
Sub Send_to_Me()
' Send_to_Me Macro
Dim objTemp As Object
Dim FileExt As String
Dim TempFileName As String
Dim FileFullPath As String
Dim FileFormat As Variant
[Code] ......
This is the line that I get with the message above. It is only 2 sheets. Excel 2010 Windows 2007
The macro I'm writing (Excel 2010) is a loop that inserts a column based on a variable location, enters in a formula in the first cell, enters another formula in cell 2, then should fill that second formula to the last row, then keep going until the loop ends. There is always a chance that there will be blank cells to the left and right so I didn't use xldown. I've tried writing in multiple ways, but I keep getting the error.
Code: Sub colfrmadd() Range("A1").CurrentRegion.Select colcnt2 = Selection.Columns.Count
I'm using Excel 2013 and I'm getting an issue in vba I can't figure out. (This is something I've done several dozen time before) But everytime I try to copy a sheet in a workbook,
1.) I have excel 2007 and when I recorded the macro yesterday it worked just fine, but today it's coming up with the box to update values. The macro is set to open up the vendor assignment sheet and do a vlookup against the clerk and then return the information to the original sheet and then copy paste special values. 2.) Today it's also doing the calculating thing in the corner using 2 processors which it has not done before. 3.) Run-time error '1004': PasteSpecial method of Range class failed.
[code]' Keyboard Shortcut: Ctrl+r ' Dim OriginalSheet As Workbook Set OriginalSheet = ActiveWorkbook Columns("B:B").Cut With Columns("A:A") .Insert Shift:=xlToRight End With
but my code is running in a loop and i can see that atleast 20 buttons were added and it fails to select when it try to add this iteration. It is completely confusing me.
I also notice that when it fails, on select method .. the button was actually added to the sheet with caption/name as "Button 65536" but then fails to select it. What makes the select to fail after adding the button? Could there be anything special with Button 65536?
Is there any better way to code the adding button and setting action and name for excel 2007?
note before entering the loop i am deleting all the shapes with myShape.Delete which name matches "btRun"
I also want to highlight that i don't have 65536 rows in my sheet. I just have 200 rows. and when this error happens it is on row 150 so firstly i wonder why it is naming the button as Button 65536. I would assume it will start with 1 and go on increments.
What makes excel to fail to select an added button in VBA?
As part of a larger Macro I have the following Code:
Range("X2").Select ActiveCell.FormulaR1C1 = "=IF(RC[-1]>0,""Yes"",""No"")" Range("X2").Select Selection.AutoFill Destination:=Range("X2", "X" & lastRow) Range("X2", "X" & lastRow).Select Selection.Copy
The code works fine when I have more than two rows of data that I am manipulating but gives me an Run Time Error - AutoFill Method of Range Class Failed at the following line:
Selection.AutoFill Destination:=Range("X2", "X" & lastRow)
When I have only one row of data I get the Run time error.
Any code that will allow me to process the data if I have one row of data as well.
Very new to VBA and having trouble with a simple macro running in 2003 that copies and pasts to another worksheet. Code as follows:
Private Sub CopyResults_Click() 'Select the filtered data and copy it Range("A23").Select Range(Selection, Selection.End(xlToRight)).Select Range(Selection, Selection.End(xlDown)).Select Selection.Copy Range("F19").Select ' Open the template and copy in the data Workbooks.Open Filename:="C:Athens Verification DataTemplatesVerification Template.xls" Workbooks("Verification Template.xls").Activate ActiveSheet.Range("A1").Select ActiveSheet.Paste ActiveSheet.Range("A1").Select Application.CutCopyMode = False End Sub
When I run CopyResults, the sheet is opened and the data copied correctly, but I get a runtime error 1004 past method of worksheet class failed, with the line 'ActiveSheet.Paste' highlighted. Don't get this when I run the same macro in 2000.
I am encountering this error when I try to run code I have written on my own machine. I am working with all unprotected sheets, and I am running Excel 2007. All of the sheet exist.
When I run this code I get a run time error 1004, copy method of range class failed, I have an autofilter on and it is showing 5 rows, the 5 cells in column A of sheet2 gets copied to sheet1 OK but I get the error?
I am getting the following error: Run-time Error '1004': Copy method of Worksheet class failed. after adding 53 worksheets to a workbook using VBA. I found several posts concerning this error in the forum. However, I did not find any responses that address the root cause or provide a solution.
A , Method of Range Object "_Global" Failed , error occurred upon running the code below at the emboldened statement.
Code: Sub copytosheet2() Dim Lastrow As Long, CopyRng As Range, DestRng As Variant, i& Worksheets("Sheet1").Activate Lastrow = Worksheets("Sheet1").[A65536].End(xlUp).Row ' For i = Lastrow To 2 Step -1
[Code] ......
The goal is to loop through columns of data on sheet1 and copy values of cells B-C to the lowest rows on sheet2 column B-C.
I have a macro that opens a specified woorkbook that changes every month. There are formulas which are pasted to range I1 of the new workbook to calculate the totals on this sheet. Everytime i run the code though, I get an error that says "Select method of range class failed" and Range("I1").Select is apparently the error.
Why I'm getting the above error when I try to copy and sort data into a workbook?
I'm using this:
Code: Sub GetData1() Dim SaveDriveDir As String, MyPath As String Dim FName As Variant SaveDriveDir = CurDir MyPath = Application.DefaultFilePath 'or use "C:Data"
[Code] .......
To import the data and then these lines to copy the unique records to a range:
Macro has been working fine for ages suddenly have received this consistently?
It's not debugging to allow me to see the route of the problem.
i've googled and seen it's normally a use of select but can't see any issue in my code or understand why it would work for months and now stop.
note: also after i click Ok on the error the macro seems to continue running and data is pulled through. ...but this message comes up every time so it's questioning the reliability of the data it's pulling.
Check Personnel Number in Data Tab with Personnel Numbers in Insert Tab. If they match copy that row from Insert Tab and paste it into the next available row in the Moves Tab.
I am using this code (below) to hide certain rows or columns depending on what number is entered. Everything is working fine and I am at the point where I would like to share this excel sheet with others but I would like to lock certain cells so that others cannot alter the formulas. As soon as I lock the cells and then enter values into the unlocked cells, I get the "run-time error '1004': Unable to set the Hidden property of the Range class".
I am using excel 2010 x64.
Code: Private Sub Worksheet_Change(ByVal Target As Range)If Not Intersect(Target, Range("B3")) Is Nothing Then If Range("B3").Value = 0 Then Columns("G:P").EntireColumn.Hidden = True Else If Range("B3").Value = 1 Then Columns("H:P").EntireColumn.Hidden = True
I'm attempting to write an OutLook 2007 macro that extracts excel spreadsheets from incoming email and saves them as a .csv file. Before saving the file I need to delete the header row. I am getting a "Error 1004 - Delete method of range class failed" error when running this code.
Here is the code: (the bolded line is where I'm getting the error)
Public Sub ConvertToCsv2() Dim xls As Excel.Application Dim oWB As Excel.Workbook Dim tmp As String Dim ws As Excel.Worksheet
i added a "Microsoft office spreadsheet 11.0 " object using additional control and used it in my form of Excel Macro. then i added some data from the combo box to the embedded excel object dispalyed. the form displays correctly and am even able to add data to cells.
but am not able to sort a column. gives me the error message "Sort method of range class failed" have tried to make sure the sheet is active using the ".Activate" with the object name. this is the only solution available on the existing forums.
I have a pretty simple macro that I recorded and attached to a button. The macro is: Sub Paste_Data()
Cells.Select Selection.ClearContents ActiveSheet.PasteSpecial Format:="Text", Link:=False, DisplayAsIcon:= _ False Range("A3").Select End Sub
The user opens the file that contains this macro, then runs a report from a website that dumps into an excel file. They copy the data from the Book1 output, then click the button to paste it into the template. If done this way, it works fine.
However, if they run the report and get Book1 THEN open the file containing the macro, they get a run-time error 'PasteSpecial method of Worksheet class failed' on the 'ActiveSheet.PasteSpecial... line
My workbook holds a month template and sheets for each month. I work on modifications in the template ,but would then like to update all the monthly worksheets. I recorded a macro to show me how to start programming the vb sub, but get a runtime failure 'error 1004 Select method of range class failed' when trying to select the column to copy,
I've got an excel spreadsheet that has a search function on it. There is a hidden tab where all the data sits, and a visible tab with a search button where you can enter a reg of a car and it brings up details from the hidden tab.
This works perfectly when I open the excel file that is on my machine. I've put the excel file on the intranet, and to open it you click a link, and when the pop up box comes up, you click 'OPEN', and the file opens up within IE. When I try and search for a reg, I get the following error!
Run-time error '1004': Method '' of object '_Global' failed
Its really confusing because this didnt used to happen before.. so I cant see why there would be an error with the code because it used to work!
Here is my code.
Sub Button1_Click() 'Sheet module code. 'Find my data in the indicated range, on this sheet! Dim strMessage$, strTitle$, strDefault$, strShtNm$ Dim lngMyCol&, lngLabelRow& Dim varRegID As Variant Dim rngMyData As Range Dim cell As Object
