Looped Error Check Not Working: Error 1004 Is Generated When A Match Cannot Be Found In The Spreadsheet
Jul 2, 2006
the if stattement works perfectly and does exactly what i want except when it comes to the else part. if there is no error the statements are run perfectly but if there is an error (in this case the error is generated when a match cannot be found in the spreadsheet) the else statement doesnt kick in and post the msgbox.
the code just crashes. and returns an error 1004 on the line i have highlighted in yellow
res = WorksheetFunction.Match(invvar, Columns(1), 0)
If Not IsError(res) Then
Me.txtClientID.Value = ws13. Cells(res, 7)
Me.txtNumber.Value = ws13.Cells(res, 7)
Me.txtDate.Value = ws13.Cells(res, 8)
'save client id as a variable
'Print to invoice------------------------------------------------------------------.....................
View 6 Replies
ADVERTISEMENT
Oct 4, 2009
Private Sub Worksheet_Activate()
Sheets("Search Inv").Protect UserInterFaceOnly:=True
ActiveSheet.Range("A17:F37,C39:C42,F39:F42").Select
Selection.SpecialCells(xlCellTypeConstants, 23).Select
Selection.ClearContents
End Sub
Above is meant to clear the contents of cells that contain formulas while keeping the formulas.
The sheet is protected ... no password
What is wrong ... when I activate the sheet I get: Run Time error 1004 / no cells found
(All cells that are meant to be cleared are selected ... they just don't clear)
View 9 Replies
View Related
Sep 25, 2008
This macro starts out looking for the first non blank cell by looking down about a hundred cells and then going back up till it finds the first non blank cell. When it finds the first non-blank cell it goes up 1 row and adds 1 to the number for the next row. It works fine the first time then, after the file is saved it will stop the macro with the following message; Run-time error ‘1004’ No cells were found. If I format the cells in question, the macro works again until I save the file, then it happens again.
Excel 2003 11.8220.8221 SP3
I think there is a hotfix for this but I can't get it to install. Is there a way around this?
This is the portion of the code that gets the error:
Range("A11:A100").Select
Selection.SpecialCells(xlCellTypeBlanks).Select
ActiveCell.FormulaR1C1 = "=+R[-1]C+1"
View 9 Replies
View Related
Dec 9, 2009
The script below scans through a specified folder on a network and scans every xls file inside that folder for a value. When it finds the spreadsheet which contains that value (a policy number) it outputs some of the data from the matching file and also provides a link to the sheet in question.
It worked perfectly until I saved, exited and re-opened the file and now I am getting a 1004 run-time error every time I try and execute the script.
I cant for the life of me work out a cause.
More baffling, the wording of the error says that the file 'R:DirCancellations.xls' could not be found.
At no point is a file called 'Cancellations.xls' specified. Why has the script decided to search for a file called 'Cancellations'?
Sub Search()
ActiveSheet.unprotect
ActiveWorkbook.unprotect
Dim wb As Workbook
Dim TheFile As String
Dim MyPath As String
Dim DirLoc As String
Dim PolNum As String
ActiveSheet.Range("C13:G25").ClearContents................
View 9 Replies
View Related
Feb 9, 2009
I ran my macro on a spreadsheet and it was fine.
But when I ran it from another spreadsheet I received the below error.
i.e. I placed the macro in book1.xls & from there open book2.xls.
ERROR:
HTML Run-time error '1004':
Application-defined or object-defined error
The error pops up when the macro reach the line "Rows ("3:3").select".
View 5 Replies
View Related
Mar 9, 2009
we've been using this spreadsheet as a timesheet since May of 2002. Recently in the past couple of days when we try to update an employee's time and date of work done by clicking on an update button on the first Worksheet, an error (Runtime Error '1004' Method 'Range' of object '_Global' failed) pops up.
Clicking the 'Debug' button opens a window up with this information:
View 14 Replies
View Related
Mar 4, 2008
I am trying to used match function in the code but I am getting the following error:
Run time error '1004'
Unable to get the match property of the worksheet-function class
Here is the
View 9 Replies
View Related
Jan 11, 2006
If lookup doesn't find a match in the first column, can I get it to return an
"ERR" or "0", something that would let me know there was no match? Right now
it returns the value in the second column of the closest value.
View 13 Replies
View Related
Apr 26, 2006
I have some code that, although works fine in Excel 2003, does not in Excel 1997. I receive this error when I try running it:
COMPILE ERROR:
NAMED ARGUMENT NOT FOUND
Sub HPVAL()
Dim r As Range, myStr As String
myStr = "HP"
Set r = Cells. Find(What:=myStr, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False)
If Not r Is Nothing Then
r = r.Value
While Not r Is Nothing
Set r = Cells.FindNext(r)
If Not r Is Nothing Then
r = r.Value
End If
Wend
End If
End Sub
It looks like Excel is getting hung up on the "SearchFormat:=" portion of the code.
View 2 Replies
View Related
Oct 20, 2006
I have a very simple spreadsheet that generates a "backing page" for items to be physically pasted to (essentially nothing more than printing a header). I have the following code under "This Workbook" to avoid being prompted to save changes when closing, as this spreadsheet is just a template and changes should not be saved...
Private Sub Workbook_BeforeClose(Cancel As Boolean)
ActiveWorkbook.Close False
End Sub
The code does as is intended, but, if any other spreadsheets are open at the same time, I get an error message pop-up saying "EXCEL has encountered an error - an error log has been generated"... Excel then shuts down. So, first question; where should I look for the error log?
View 2 Replies
View Related
Dec 14, 2008
Below is the code in which the macro is showing error
Run time error '1004'
Application-defined (or) Object defined error
View 8 Replies
View Related
Aug 19, 2009
Before I go into details I am working in one workbook with several worksheets(Tabs) in the workbook. I have three Buttons on one tab. the button I am having trouble with is the third. I want to insert a column in a separate tab that contains approximately 87,000 rows of data. I then want to do a row count and select the empty cells in the inserted column and put a formula in there. I have tried a loop VBA code and it works, but it takes about 30 minutes to run all the way through. The underlined portion is what is higlighted with error 1004: Application-defined ro object-defined error. I am not sure how to fix this. This is what I have now:
View 13 Replies
View Related
May 29, 2014
Error Check Marco.xlsm
see attached example. I am trying to write an error detection routine that iterates through worksheets that have numeric values for names (ignore text names or alphanumeric). Macro checks range on each numeric worksheet E3:E33 and is supposed to report back on the SummarySheet if any value other than 1 or 0 is found in range E3:E33 on any numeric-name worksheet. Code as follows:
[Code] ....
Problem is that it just reports EVERY worksheet as having an error when clearly most don't (none do I think in the attached example).
Try changing some of ranges E3:E33 to values other than 1 or 0, it still reports all sheets. Why the macro does not evaluate the range E3:E33 properly and just reports every worksheet as having an error?
View 8 Replies
View Related
Sep 12, 2012
So the issue I am having is that I have a worksheet with two long rows of value. If the user enters the incorrect value, the program gives a error case of 1004. If and when this error occurs I want the program to send a MessageBox to the user then end the program. The problem that I am running into is that whenever I write On Error Goto... It Goes to the label whenever any runtime error occurs. My belief is that there has to be a way to only check for a runtime error on a single line of code rather than the entire sub.
View 3 Replies
View Related
Apr 20, 2009
I am attaching my workbook. On sheet1 it has data and on sheet2 I have buttons to run macro. The macro brings in the data I want but after editing it does not put it back. The message it gives is "match not found for row".
View 4 Replies
View Related
Mar 5, 2013
I have a relatively complex report that I work with and a worksheet is no longer required. I have deleted the worksheet and reference to it hwoever when running the macro to pull all the data, it gets to the summary of all the data and i get the Run Time Error 1004 Application-defined or object-defined error pop up. ON reviewing it, it is on this line ActiveCell.Offset(0, 0).Range("a1:a" & Range_Height).Select of the below code...
VB:
Sub GetRangeName()
Sheets("TOTAL").Select
[Code].....
use code tags around code. Posting code without them makes your code hard to read and difficult to be copied for testing. Highlight your code and click the # at the top of your post window.
View 1 Replies
View Related
Apr 26, 2009
I have a simple function below to put in different forumlas in different cells to get stock quotes. When I run this I get runtime error 1004 application-defined or object-defined error. The first formula goes through but vba chokes on the next formula: ActiveCell.Offset(I - 1, 4).Formula = username
View 10 Replies
View Related
Aug 12, 2009
Run-time error '1004' Application-defined or object-defined error. I am trying to use this
View 2 Replies
View Related
Oct 4, 2009
I was trying to use the below code
View 4 Replies
View Related
Dec 4, 2009
I keep getting a Run Time Error 1004 (Application Defined or Object Defined Error) when my sub reaches this line:
ActiveCell.Formula = "=SUM(D222,D224,D226,D227,D229,...)"
In the actual line of code the "..." above is another 20-30 or so cells in column "D". Probably no more than 150-170 characters in the line.
If I remove half of the cell range names it works, but I need all of the cell ranges for the equation.
View 9 Replies
View Related
Jul 24, 2007
I am trying to copy the info from one workbook to another workbook.
I keep getting the above referenced error...
Private Sub CommandButton1_Click()
Dim filepath As String
filepath = Range("A100")
MsgBox ("File Appended")
Workbooks.Open (filepath)
Windows("CorrespondenceMaster.xls").Activate
Sheets("Sheet2").Select
Range("DesNo", "LocationPath").Select
Selection.Copy
Windows(filepath).Activate
Range("A2").Select
ActiveSheet.Paste
End Sub
View 3 Replies
View Related
Jan 12, 2010
I haven't figured out who hates who more, me hating VBA or VBA hating me.. we just do not get along very well.
Anyways, I am having difficult understanding why I am getting the following error:
Error 1004: application defined or object-defined error.
I am using code that I just copied over from a worksheet where it was working fine. This is part of it.
View 6 Replies
View Related
Dec 1, 2003
I have a userform setup to enter data into a worksheet
Whee the user hits the button to add the data, I get the error 1004
Application defined or Object defined error
It is on the line Set LastRow
Private Sub CommandButton1_Click()
Dim LastRow As Object
Set LastRow = Sheet1.Range("a65536").End(x1Up)
....end sub
Now I am sure this has always worked in the past, so Is it me or am I really missing a plank or two?
View 9 Replies
View Related
Dec 23, 2009
when I run the macro, I receive an error: "Run-Time Error '1004': Application-Defined or Object-Defined Error" See attached macro. If I click "Debug", the line "With r.Resize(,1)....... becomes highlighted in yellow.
View 9 Replies
View Related
Sep 18, 2009
In one worksheet i have created the following code, which adds date to
specific column when data is entered in colum A.
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
If Target.Column = 1 Then
Target.Offset(0, 10).Value = Now()
End If
End Sub
The problem is that when trying to delete a whole row, error message pops-up.
Run-time error '1004' Application-defined or object -defined error. When click "End" actually everthing is ok, the row has been deleted, but was just wondering what is causing that error.
View 2 Replies
View Related
Jan 6, 2010
This error is telling me "application defined or object defined error" and i am unsure how to fix it. Basically i have a ton of files within a folder that i am trying to do some reformatting to. I would like to save the new files to a new folder and keep the originals where they are.
View 5 Replies
View Related
Jan 17, 2008
I'm using VB 6.5 and Excel 2007. I've got a workbook that has code that creates another workbook (by copying sheets out of the current workbook) and drops a button on that workbook and creates a macro for that button. Everything works except one thing which gives me
Runtime Error 1004: Unable to update the Caption Property of the Button Class.
If I run the code manually (rather than calling the subroutine from from within another subroutine) it runs without error but if I call it from within the subroutine that copies sheets from the original workbook to a new workbook I get the error. Any idea why this might be? What I might be doing wrong? The code for this subroutine is as follows:
Sub CreateButton()
Dim btnMyButton As Button
Set btnMyButton = ActiveSheet.Buttons.Add(460, 75, 140, 30)
btnMyButton.Caption = "Delete and Update Charts and Lists"
End Sub
View 9 Replies
View Related
Apr 9, 2014
I have a sheet that will force user to enable macro before revealing the sheets and enabling them to key in data. But because I need to protect the workbook from user deleting sheets and also having some locked cells. I got the run-time error 1004 unable to set visual property of worksheet class
View 1 Replies
View Related
Jan 12, 2007
Is there a limit on the amout of pictures you can use with the statement me.pictures.visible? Reason being, I am trying to import 119 pictures into a spreadsheet. When the information is selected form a drop down list, it pulls up the 1 of the 119 pictures. I was able to get 54 pictures input. Everything was going great until the 55th. When it stared giving me an error...
______________________________________________
Runtime Error '1004':
Unable to set the Visible property of the Pictures class
______________________________________________
When I select Debug, it takes me to the line with Me.Pictures.Visible = False
Everything seems to work fine until I enter the 55th picture. If it is that, is there a viable work around?
View 9 Replies
View Related
May 5, 2014
the problem I'm having is that when trying to copy the value of cell A2 and paste it in cell A4 with (INSERT with the second button of the sheet). this give me the error RUN TIME ERROR '1004 '.
View 7 Replies
View Related
