I've been trying to use the source code from one of my earlier modules pasted into a new one.
The only thing I changed was the name, and the necessary parameters.
The code doesn't run, is there some logical reason for this?
I've attached a sample workbook in which there are 3 macro-buttons.
The buttons will paste a shape in the active cell. So this means the buttons themselves could be deleted and replaced with a shape.
Since locking and then protecting the cells disables the macros, how can I amend the code to make sure the buttons' cells are protected from the copying and pasting macros? Or, how do I ensure that the macros only work in A1 - E5?
I want to copy the current region on sheet 3 and paste that into sheet2 starting with cell E4. But I don't want to actually use the copy method. I believe there is a way to do this. I was thinking the following:
[Code] ......
The idea I had was to simply state that cell E4 would be assigned the value of CurrentRegion on sheet 3. Is there a way to bypass the copy method?
If not, how to copy, then paste?
I have the following code which copies and pastes from one row to another
View 3 Replies View RelatedI've got cells which change after I use Solver to do simulations, These cells after the calculation is run I'd lke to paste into a seperate sheet and row for example (in preparating of charting them for example)..
I would like to paste it as folllows for example... .. but problem is, let's say the below list are in column A of the new sheet, than column B would be the first output of the calculation in the other sheet, column C would be the second output from the calculation in the other sheet. and so on..
I don't know the first thing on scripting, but I'd like to click on button where the calculations are made which when clicked on ,will paste to the other sheet in this sort of manner below.
Each calculation will use another column.. so the script must recognise there is other columns to the left already filled, ie. B, C, D, E F, coresponding to the results of calculations already performed.
Gross income
Expenses
Net Tax
if anyone has some vba code that can help with keeping latest duplicates when pasting to another worksheet.
Basically, I have a worksheet with YTD data and another worksheet with data for the current month. I need to paste the data from the Month to the YTD sheet. However, if the data (a reference number in column A) already exists, the row from the Month data should be pasted over the duplicate in the YTD sheet, and if it doesn't exists, it should paste it as a new row.
At the moment I'm just copying the whole lot to the YTD sheet and then try to remove duplicates, however, once it's pasted, I don't know which ones to remove.....
I have a graph, that I would like to be able to copy from one sheet and paste into another, is there away of doing this without dropping the data i.e. every time I copy and paste the graph clears, I don't want to copy the spreadsheet data as well as the graph is purely for a visual
View 3 Replies View RelatedI have attached the file. The row being copied is row "X" for both buttons. I have 2 buttons in the same worksheet to copy a row and insert the copied row below it. I have this macro running for 2 different rows in the worksheet, assigned to the respective 2 buttons. See my code below.
View 4 Replies View RelatedI have a folder with files in it. I want to copy the file names and past them into my Excel spreadsheet. This seems like it should be a simple task.
View 6 Replies View RelatedI am creating a macro for a monthly report of inventory. When I filter out items and the copy and paste them to another sheet, how do I tell the macro to paste it in the next available cell rather than say A20? Because the report has a different number of items and filter results from month to month.
View 3 Replies View RelatedI have a range of cells I want to copy which has some textboxes and check boxes in it. When I do a copy/insert cells in vba it only copies the cells and their values but not any of the boxes.
.Range(.Cells(Origin.Row + 1, Origin.Column), .Cells(Origin.Row + 12, Origin.Column + 10)).EntireRow.Copy
.Range(.Cells(Ind.Row, 3), .Cells(Ind.Row, 3)).EntireRow.Insert Shift:=xlDown
Say I copy "My name is John Doe"
In Cell B2 or D9 or whatever, I want to insert a Comment with it being "My name is John Doe"
How do I make Paste work in Comments?
I'm trying to write a macro that looks in cell A1:VGH1 for the text "Name:" within the row, then copy that cell and other following cells and paste into a new row. This macro can loop through the row until all instances of the text "Name:" and the following cells are on their own row.
What I have currently.
Name:xxx From:xxx Name:xxx To:xxx From:xxx Name:xxx: To:xxx
The result
Name:xxx From:xxxx
Name:xxx To:xxx From:xxxx
Name:xxx To:xxx
Why my code is not working. When I choose a single column it works. Once I select more than one column it doesn't work. It something to do with my "column1:column2" reference.
View 2 Replies View RelatedI have the following code (which works fine when the sheet isn't hidden)
Code:
FinalRow2 = TtlRev.Cells(Rows.Count, 1).End(xlUp).Row
TtlRev.Range("AM6:AO6").Copy
TtlRev.Range(Cells(6, 39), Cells(FinalRow2, 41)).Select
ActiveSheet.Paste
However, I need to hide the sheet, but it doesn't work because you can't use .select on a hidden sheet I believe. Any way of doing this to a hidden sheet?
I am having trouble with a project for school. The instructions are: (In Worksheet 1) Type Your Name. Now, begin recording a Macro. Copy and Paste your name from Worksheet 1 to Worksheet 2. Fill in the background and edit the font. End.
Here is an example of the coding.
ActiveCell.Range("A1:E1").Select
Selection.Copy
ActiveSheet.Paste
Application.CutCopyMode = False
With Selection.Interior
.Pattern = xlSolid
.PatternColorIndex = xlAutomatic
[Code] .....
Now, according to the instructions I should be able to run the Macro in any worksheet....but anytime I run the Macro in any other worksheet I just get a yellow block without my name there.
Do we get the option in excel to copy from different locations (just copy a part from say Sheet A, Sheet B and some other excel file) and then pasting all at once in some other file?
View 2 Replies View Relatedi have a huge table which i've filtered for a value in a column. my data has been reduced from 20000 to 100.
how can i copy and paste ONLY the values for those 100 rows? (4 columns and 100 rows)
everytime i do it, it copies all 20k rows!
In my very crude code below....I would like to speed up the coding so by extracting data from some 800 CLOSED workbooks and pasting the data from Non-contiquous cells in an active workbook on one sheet. Can't seem to ge the = Excelmacro4 closed workbooks method to work so I went with opening each workbook, extracting data and then closing each workbook...way too slow.
Question 2. As the loop progresses...I would like to concatenate the text strings copied from the Source books Ranges G4 and G5 as they are pasted into a single cell in the destination workbook. Can't figure out how to either concatenate or xlpaste special in the coding.
Question 3. IF a user has a one of the workbooks OPEN, how do I copy that data as well other than On Error Resume Next?
Dim wbOpen As Workbook
Dim wbDest As Workbook
Dim WS As Worksheet
Dim i As Long
Sub GetdaData()
Application.ScreenUpdating = False
Application.EnableEvents = False
I have multiple customers in a list that I would like to create individaul tabs for each, with customer name and store #, and at the same time utilizing my sales sheet template for all customers. Is there a way to do this without copying and pasting one by one.
View 9 Replies View RelatedI have a main worksheet with several categories in column A. I would like to set up an IF statement VBA macro, where by if cell "A2" = XYZ, then copy entire row 2 to worksheet XYZ; if cell "A3" = ABC, then copy entire row 3 to worksheet ABC, etc.
View 4 Replies View RelatedI just need a code that will copy items in a row from column A:F...
View 5 Replies View RelatedI have created a daily operating room schedule in which each time slot has a drop down box for the Doctor doing the procedure and the Group of doctors from which he/she came.
It is a yearly schedule with each day of each month duplicated on a tab for that month - the same daily schedule for each.
I have been able to duplicate each day right up until the 25th of the month in which I attempt to save the spreadsheet and am given an error stating it can not save some of the data, though the data appears to be intact (the validation drop down lists)
Upon closing and reopening the spreadsheet, all of the cells that contain validation including and after the 25th of the month are simply gone.
I have attempted to attach a copy of the file but I keep encountering an error with the database.
Zip file with xls file has been added
So, I have a document 25 pages long. It has 26 sections (1-26) and each section has up to 10 (.1 - .10) sub sections which contain 16 (a-p) sub-sub-sections. There are 6 columns of varying widths. Some cells, in a row, merge into adjacent cells.
I would like to break this document into 26 documents - one for each section - so that I may recombine and regroup them in the future incorporating a few modifications. Whenever I copy and paste to a new Workbook, I loose the formatting of column widths. Resetting these alone takes lots of time.
I have come up with is to duplicate the entire document and delete everything above and below the section I would like to save. Then repeat for next section. There's got to be a better way?
doesnt work when recording a macro because the group name changes each time I group the pictures (visios) and the picture names change depending on what is on the sheet at the time.
Is there a way to group every picture on a sheet1 (excluding macro buttons), then copy them to sheet 2?
I am having some trouble with the "mid()" function. I have it saved as a variable which pulls 6 digits from another variable. I was trying to paste from the mid variable into my excel worksheet but it keeps on telling me that there is an object required error.
The goal is to input the "mid()" output in my code into a cell in the spreadsheet.
Here is some sample
I was wondering if there was a way to create patterns when copying and pasting formulas?
For example, here is what I want to do right now:
=AVERAGE(Sheet1!I2:I650)
=AVERAGE(Sheet1!I2:I649)
=AVERAGE(Sheet1!I2:I648)
=AVERAGE(Sheet1!I2:I647)
=AVERAGE(Sheet1!I2:I646)
=AVERAGE(Sheet1!I2:I645)
=AVERAGE(Sheet1!I2:I644)
=AVERAGE(Sheet1!I2:I643)
=AVERAGE(Sheet1!I2:I642)
=AVERAGE(Sheet1!I2:I641)
=AVERAGE(Sheet1!I2:I640)
In other words, have a pattern in the formula?
Or something like this, but filling out cells horizontally.
=A1/A100
=A1/A99
=A1/A98
=A1/A97
=A1/A96
=A1/A95
etc...
Or:
=A1*A1
=A1*A2
=A1*A4
=A1*A8
=A1*A16
=A1*A32
=A1*A64
etc...
How do you crack a protected spreadsheet other than copying the tab and pasting? Someone protected a lease abstract by mistake and now we cannot make changes.
View 1 Replies View Relatedi have selected cells from workbookA (b2:b8) , i want those selected cells gets pasted in workbookB in a transpose way.
like B1 cell in workbookA pasted into A2 cell in workbookB , B3 cell pasted into D2 , B4 cell pasted into B2 and B5 cell pasted into G2......
i have code but not working
Code:
Private Sub CommandButton1_Click()
Dim STRFILENAME As String
Dim O As Workbook
Windows("Copy of Bill Schedule Form1.xlsm").Activate
Sheets("Sheet1").Activate
ActiveSheet.Range("b2:b8").Select
[Code]....
I am using the following code to copy a template to a new worksheet each month:
Code:
Sub CopyTemplateNewMonth()
Application.ScreenUpdating = False
Dim SourceRange As Range, DestRange As Range
[Code]....
Everything copies over except an Activex Control button. I also have form control buttons with macros assigned to them, and they copy & paste just fine. The code assigned to the ActiveX button also copy's & paste's just fine...but the button itself does not.