i have a huge table which i've filtered for a value in a column. my data has been reduced from 20000 to 100.
how can i copy and paste ONLY the values for those 100 rows? (4 columns and 100 rows)
everytime i do it, it copies all 20k rows!
I want to copy the current region on sheet 3 and paste that into sheet2 starting with cell E4. But I don't want to actually use the copy method. I believe there is a way to do this. I was thinking the following:
[Code] ......
The idea I had was to simply state that cell E4 would be assigned the value of CurrentRegion on sheet 3. Is there a way to bypass the copy method?
If not, how to copy, then paste?
I have a workbook that users can make changes to a simple table and when they push a "Save" button the raw data in the back end is filtered and overwritten with their change. I only want them to change part of the raw data that has been filtered, starting in column G.
I have everything built and working up to selecting the filtered row column G where I want to paste. Their changed data is copied, the raw data filter's on a unique ID and then I'm stuck!
I have this code in there now however it's forgetting I want the visible entry not row 2:
FilterRange.SpecialCells(xlCellTypeVisible).Offset(1, 7).Cells.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks:=False, Transpose:=False
I have a data of a large no. of rows with 5 columns. The last 2 columns are district and state. As it is an imported data, in some rows the data has shifted a column, i.e. the name of state is being shown in district column and name of district is being shown in the column to its left. I tried filtering the data such that it shows only those rows where names of the states are coming under district columns and then selecting the whole thing, cutting it and pasting it to the rightmost column. But even the correct district entries got pasted under state column. Undo, the further damage was controlled, but the original problem remains. Now i will have to cut and paste each row or only consecutive rows.
View 2 Replies View RelatedI would like to paste values from a list into a different list - different tab - that is already filtered. When I try to do so, the values will paste into the hidden cells - being filtered -.
Find attached an easy example of my problem. The list I am talking about is around 1,000 lines.
Pasting Example.xlsx
To explain my example, I filter sheet 1 so only item I need are showing - B, D and F in this case - and I would like to paste the value of Alarm 3 from the Sheet 2 to the corresponding line in sheet 1. But it does not really work - line F is not filled - and when I un-filter values are filled into Item C and D.
How to paste data into a sheet that is filtered, so that only the filtered rows get populated?
I am using paste special values but it is populating every row in between despite them not being filtered.
When I've use the filter in excel, I can't seem to cut and paste/copy and paste the filtered data to another area. When I try to, it cuts/copys the entire data range, not the filtered one.
View 4 Replies View RelatedI often end up in a scenario where I want to be able to move text from one column into another using a formula, which involves pasting a formula down a filtered range... E.g. Column A contains both ID numbers & dates, I want to move ID numbers into Column B, so I apply a filter to all ID numbers using a formula "=A1" and paste it down the filtered range.
It becomes an issue when there is greater than 50 - 60 thousand rows - excel throws an error "selection range is too complex" and disregards the filtered range.
Only thing I can think of would be a VBA script to automate pasting a formula in blocks of 50,000 rows.
I wanna copy and paste the data -- visible cells after I filtered data. How can I do that.
View 2 Replies View RelatedI have the following code which copies and pastes from one row to another
View 3 Replies View RelatedI've got cells which change after I use Solver to do simulations, These cells after the calculation is run I'd lke to paste into a seperate sheet and row for example (in preparating of charting them for example)..
I would like to paste it as folllows for example... .. but problem is, let's say the below list are in column A of the new sheet, than column B would be the first output of the calculation in the other sheet, column C would be the second output from the calculation in the other sheet. and so on..
I don't know the first thing on scripting, but I'd like to click on button where the calculations are made which when clicked on ,will paste to the other sheet in this sort of manner below.
Each calculation will use another column.. so the script must recognise there is other columns to the left already filled, ie. B, C, D, E F, coresponding to the results of calculations already performed.
Gross income
Expenses
Net Tax
I'm struggling with a function I wrote that I intended to filter out the blanks in a column, then only copy the results that aren't blanks to another sheet. The code below copies all data which I don't want. I know I need to be more specific in what range to copy, but I've tried various things but get compile errors.
Code:
Sub createMaterialRequisitionButton()
Worksheets("Material List").Range("$A$19:$E$500").AutoFilter Field:=1, Criteria1:=""
'COPY QUANTITY TO MATERIAL REQUISITION
Worksheets("Material List").Range("A19:A500").Copy
Worksheets("Material Requisition").Range("$A$12").PasteSpecial Paste:=xlPasteValues
End Sub
I have the following snippet of code which runs a filter on a list and copies the filtered values to the first available row on another sheet.
However, i get an error when there is no data after the filter. How can i change the code so that if there is no data, it simply moves onto the next line.
Here's my code:
Code:
Sheets("Sheet4").Select
lastrow = Range("A" & Rows.Count).End(xlUp).Row
Range("F2:F" & lastrow).Formula = "=countif(d$2:D2,D2)"
ActiveSheet.Range("$A$1:$F$" & lastrow).AutoFilter Field:=6, Criteria1:=">1"
Range("A2:F" & lastrow).Select
Selection.SpecialCells(xlCellTypeVisible).Copy
Sheets("Sheet6").Select
[code]....
I have the following code, which adds a column to some data, and counts duplicated. It then filters the list, and copies it to a new sheet.
Code:
Sheets("Sheet4").Select
Range("F1").Formula = "Duplicate?"
lastrow = Range("A" & Rows.Count).End(xlUp).Row
Range("F2:F" & lastrow).Formula = "=countif(d$2:D2,D2)"
[Code] .......
This works fine except for if there is no Data.
If there is no data in "sheet 4".
How can i get it to skip the copy/paste when lastrow = 0?
I would like to change the code below so instead of copying the whole column it only copies the items visible (i.e. they have been filtered in a couple of different columns).
For Each rngData In Range("E4:CR258").Columns
rngData.AutoFilter Field:=1, Criteria1:="<>"
rngData.Copy
rngData.EntireColumn.Cells(263, 1).PasteSpecial xlPasteValues
rngData.AutoFilter
Next
I have a graph, that I would like to be able to copy from one sheet and paste into another, is there away of doing this without dropping the data i.e. every time I copy and paste the graph clears, I don't want to copy the spreadsheet data as well as the graph is purely for a visual
View 3 Replies View RelatedI have attached the file. The row being copied is row "X" for both buttons. I have 2 buttons in the same worksheet to copy a row and insert the copied row below it. I have this macro running for 2 different rows in the worksheet, assigned to the respective 2 buttons. See my code below.
View 4 Replies View RelatedI have a folder with files in it. I want to copy the file names and past them into my Excel spreadsheet. This seems like it should be a simple task.
View 6 Replies View RelatedI am creating a macro for a monthly report of inventory. When I filter out items and the copy and paste them to another sheet, how do I tell the macro to paste it in the next available cell rather than say A20? Because the report has a different number of items and filter results from month to month.
View 3 Replies View RelatedI have a range of cells I want to copy which has some textboxes and check boxes in it. When I do a copy/insert cells in vba it only copies the cells and their values but not any of the boxes.
.Range(.Cells(Origin.Row + 1, Origin.Column), .Cells(Origin.Row + 12, Origin.Column + 10)).EntireRow.Copy
.Range(.Cells(Ind.Row, 3), .Cells(Ind.Row, 3)).EntireRow.Insert Shift:=xlDown
I have a range of cells (L1:Q1) I want to copy from a worksheet called Email from one workbook and copy it into an already created and saved workbook called 'TDocuments.xls' located in the root of my C: drive.
Thing is I need to paste this range into the first blank row of TDocuments.xls, so it will need to find that first and then paste the values (without formulas) into the TDocuments.xls and save it.
Say I copy "My name is John Doe"
In Cell B2 or D9 or whatever, I want to insert a Comment with it being "My name is John Doe"
How do I make Paste work in Comments?
I'm trying to write a macro that looks in cell A1:VGH1 for the text "Name:" within the row, then copy that cell and other following cells and paste into a new row. This macro can loop through the row until all instances of the text "Name:" and the following cells are on their own row.
What I have currently.
Name:xxx From:xxx Name:xxx To:xxx From:xxx Name:xxx: To:xxx
The result
Name:xxx From:xxxx
Name:xxx To:xxx From:xxxx
Name:xxx To:xxx
Why my code is not working. When I choose a single column it works. Once I select more than one column it doesn't work. It something to do with my "column1:column2" reference.
View 2 Replies View RelatedI have the following code (which works fine when the sheet isn't hidden)
Code:
FinalRow2 = TtlRev.Cells(Rows.Count, 1).End(xlUp).Row
TtlRev.Range("AM6:AO6").Copy
TtlRev.Range(Cells(6, 39), Cells(FinalRow2, 41)).Select
ActiveSheet.Paste
However, I need to hide the sheet, but it doesn't work because you can't use .select on a hidden sheet I believe. Any way of doing this to a hidden sheet?
I am having trouble with a project for school. The instructions are: (In Worksheet 1) Type Your Name. Now, begin recording a Macro. Copy and Paste your name from Worksheet 1 to Worksheet 2. Fill in the background and edit the font. End.
Here is an example of the coding.
ActiveCell.Range("A1:E1").Select
Selection.Copy
ActiveSheet.Paste
Application.CutCopyMode = False
With Selection.Interior
.Pattern = xlSolid
.PatternColorIndex = xlAutomatic
[Code] .....
Now, according to the instructions I should be able to run the Macro in any worksheet....but anytime I run the Macro in any other worksheet I just get a yellow block without my name there.
Do we get the option in excel to copy from different locations (just copy a part from say Sheet A, Sheet B and some other excel file) and then pasting all at once in some other file?
View 2 Replies View RelatedIn my very crude code below....I would like to speed up the coding so by extracting data from some 800 CLOSED workbooks and pasting the data from Non-contiquous cells in an active workbook on one sheet. Can't seem to ge the = Excelmacro4 closed workbooks method to work so I went with opening each workbook, extracting data and then closing each workbook...way too slow.
Question 2. As the loop progresses...I would like to concatenate the text strings copied from the Source books Ranges G4 and G5 as they are pasted into a single cell in the destination workbook. Can't figure out how to either concatenate or xlpaste special in the coding.
Question 3. IF a user has a one of the workbooks OPEN, how do I copy that data as well other than On Error Resume Next?
Dim wbOpen As Workbook
Dim wbDest As Workbook
Dim WS As Worksheet
Dim i As Long
Sub GetdaData()
Application.ScreenUpdating = False
Application.EnableEvents = False
I have multiple customers in a list that I would like to create individaul tabs for each, with customer name and store #, and at the same time utilizing my sales sheet template for all customers. Is there a way to do this without copying and pasting one by one.
View 9 Replies View RelatedI have a main worksheet with several categories in column A. I would like to set up an IF statement VBA macro, where by if cell "A2" = XYZ, then copy entire row 2 to worksheet XYZ; if cell "A3" = ABC, then copy entire row 3 to worksheet ABC, etc.
View 4 Replies View Related