I am trying to create a Macro that will let me copy and paste the Inventory with the Corresponding SKU on a different spreadsheet, I have attached the Spreadsheet, Sheet 1 is the Missing Quantities and Sheet 2 has the updated Quantities that will need to be identified by SKU from Sheet 1 to Sheet 2.
View 1 RepliesI need to create a macro that can create a dynamic copy/paste loop. So far what I have is horribly inefficient. Each row in colmn A(minus the header) has a unique number in it. For each unique number, I need to paste it based on the number of column headers in row 1(minus column A). So, if there are 20 column headers, I need to copy cell A2 and paste it 19 times in another sheet. Then, I need to move to the next number in column A and do the same thing. Here's what I have:
[Code] .........
You can see that this is not dynamic. If I add another row to my table and rerun the macro, it will not catch it. I've attached a sample file to show you the big picture of what I'm trying to do. The data that I have is in Sheet1, and I'm trying to get it into the format in Sheet3. Rows/columns will be periodically added to the table in Sheet1, so the macro needs to be dynamic to catch that. The data in Sheet3 will always remain, and the macro will add the updated data below the old data in Sheet3.
FC_Macro_Sample.xlsm
I have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
I created the following macro by recording the macro and going through the steps manually, however I need to make some changes and can't seem to accomplish what I'm trying to do.
The Macro opens a master inventory file, creates a new line, and then links certain column cells in the inventory to corresponding places within the original form (the macro is executed from the original form once it's completed).
Problem is, the macro is written using the form "template" so whenever I save the template as the name of the unique item, it won't update the macro language as well.
What I'm trying to accomplish is when someone opens the template, the save immediately with a different file name, and once the form is completed and the macro is run, it's creating the new line in the inventory pointing to that specific file.
I thought somehow utilizing ThisWorkbook within the macro instead of explicitly using something like
"='[Control Sheets (JOHN TEST).xls]FUND SET_UP PG_1'!R2C3" would accomplish what I'm trying to do.
So I've got Sheet 1 with say
____A___B___C
1___m___i___c
2___r___o___s
3___o___f___t
I would like to create a button that can create a new sheet and paste A1 to C3 at the same location on the new sheet
and I need this to create a new sheet and do that everytime the button is pressed.....
I am currentyly using VB to extract some data sets to another tab in the same workbook. I would like to extract the same data to a new workbook that is already created upon running a macro. How do I specify the location of the new workbook and sheets so the code will extract and input correctly?
The code I am currently using is:
Sub RunModel()
Dim Events As Range
'
'
Application. ScreenUpdating = False
Set Events = Worksheets("Inputs").Range("L41:L90")
Worksheets("Results").Range("A5:FX5004").Clear
Worksheets("Results").Range("A5009:FX10010").Clear
y = -100
For x = 1 To 50
(Excel 2007)
What I'm trying to create is a way to populate a quick inventory list with my bar-code scanner.
I've already learned that in order to have excel move to the next row each time a 12-digit SKU number is scanned, I'm going to have to utilize a userform text box.
My problem:
I don't even know how to begin coding the text box to accept a 12digit number, enter it into the next available blank cell (I'd like it to populate vertically) and then ready itself to accept the next available 12digit number.
My desired end-result:
My scanner is attached to a lengthy USB-Extension, so I can roam my store and quickly scan the inventory on display. For that reason, running back to my laptop and striking "Enter" each time makes the whole solution pretty useless.
Once finished, I'm assuming I could use excels count feature to tell me the quantity of the items I have on hand.
How would I create a shortcut to automatically copy the contents of cell H1 to cell K1, in other word I would like to hit a shortcut key and have the contents of that cell pasted 3 cells to the right on the same line. I have to do this over and over again down the worksheet. I am working on taxes and want to copy values over to the expenses column as I find them.
I would also like to know if it is possible while having cell D1 highlighted I could have a shortcut created that would copy the value three cells over in H1 to cell K1. That would be the fastest, but I don't know if it is possible?
I have a file that i import into excel as fixed width. this is done with the code i have already written. Now im at the point where i need to "pretty" up the report.
In colum A there are Account numbers.
My goal is to have every row with the same act copied to a new sheet, and have the sheet named after the common value in colum A.
once its done there should be roughly 10 to 15 separate sheets.
I have a workbook that writes what I need to do. When done I need to type in another sheet the exact same text and the date I did it.
I wonder if its possible to add a checkbox and when this checkbox is pressed it will automatically copy/paste the text to the next free cell of the other sheet, so I only need to type date.
Here is the workbook: [URL] .....
Check box would be added in cell A17, A18, etc.
And the text would be copied to sheet Preventive Maintenance Records in the next available cell in column A.
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
I am trying to make a tally sheet to keep track of my inventory of inserts. I am trying to make it as user friendly as possible as my operators do not have much experience working with computers. I will attach what I have made so far. The only math functions so far are: C4=B15-C15.
Right now the operator has to look at C4 to see current total, type that number into B15, then in C15 type the number of inserts thrown out to show a new current inventory total in C4. Is there a way I can set this up so that all an operator has to do is type in only the number of inserts thrown out in C15 to give current total in C4. Is there a way to make B15 know what is in C4 without the operator having to type it in. If so is there also a way to make C15 the only cell that can be edited.
I'm trying to make a simple program to allow me to total the amount of air filters I need to purchase for a given month. I am entering the amount of filters for each property and the frequency of replacement ie. monthly, quarterly, one month out of the year, etc. I would like to enter a month, ie. 2 for february and have the program list the quanty of each filter that I need to purchase for the given month. See sample attachment.
View 3 Replies View RelatedI want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
How do I print multiple inventory labels based on our inventory levels?
For example:
Item No 1000
Descr Window
Customer Taylor
PO 9001
Quantity 10
Item No 1010
Descr Door
Customer Jones
PO 9011
Quantity 35
I want to print 10 labels with the info from Item No 1000 and 35 labels from Item No 1010????
I need a macro that will create a new blank worksheet, move it to the last spot and paste the entire contents of the sheet named "master" into the newly created sheet.
I have tried to do this with the recorder but have been unable to get it to work.
I want this macro to find in this case "406" in column A which is at the very end of the last block of 160 rows of information.
I then want it to move up 159 rows and copy 160 rows of information underneath the last block of information.
i.e.go to A5280 , then go to a5121, copy rows 5121:5280 to 5281.
It falls over on the very last line of code I can see A5281 selected but it won't paste....
I had been trying really hard to get some solution on COGS valuation & inventory valuation on FIFO basis. my daily transactions are typical sales & purchases.
Attached is the inventory in/out movement from Quick Books. in the column "Num" type bill is the entry from purchase bill whihc always has a reference as P/O####. This is how i will capture the landed cost against a PO., another type "Inv Adj" is inter warehouse transfer. Name is cusotmer, Inventory is my item number. in some cases it is like "2000", in some cases it is 10000:10121, and in some cases it is 10000:10200:10201 that is why they fall in different columns when i export them.
What I would lilke to do: 1) Run a report by month, by customer showing cost of goods sold on FIFO basis, I can capture sales amount by running another report.
I am not an excel whiz, so I will need layman's terms if possible. I may have found a solution to my problem under another thread, but I couldn't understand it. I have only briefly worked with macros, a very long time ago. Here goes...
I have an inventory list that has not been updated for sales of the inventory, only for purchases. I have sales lists, generally by month, in separate spreadsheets. I am looking for a simple, efficient way of either eliminating or at least matching up the data in the sales list to the inventory list in order to remove sold items from inventory (on paper). I am hoping the result will be a fairly accurate inventory list, and related value, so that a physical inventory count won't be necessary at this time. Obviously I could copy all of the sales info into one spreadsheet, sort by inventory number, then manually delete all sold items from the inventory listing. I am REALLY hoping there is a better option.
I tried writing a macro to copy data from one tab and paste it on another. It gave me an error message every time.
So I tried recording one doing just that, and when I went to play it, it still gave me an error.
So here is what I came up with:
I have a total of 30 sheets in my workbook. I would like to copy rows 21:1000 from sheets 5 - 27 and paste them into sheet 4 starting on row 21. The data ranges vary within sheets 5 - 27. For example, sheet 6 has data in rows 21:50, whereas sheet 10 has data in rows 21:500. I chose 21:1000 as a safe measure to ensure that all data starting on rows 21 onward gets copied.
I am having trouble thinking of how to create a macro which will copy the data from sheets 5 - 27 and paste into sheet 4 leaving no blank spaces in between pasted rows. Ultimately my goal is to use the filter boxes I have set up in the column headers of sheet 4 to quickly sort all the data pasted from sheets 5 - 27.
im trying to record a macro that allows me to copy b22-b25 so i can copy it sp its on my clipboard to use in other applications
but i have this and it doesnt allow me to paste
I need a macro that will copy row 7, then let user select desired row, then the macro will paste the copied row onto it.
View 5 Replies View Relatedi'm currently building a project with VBS2008, i'm currently stuck on 2 things.
I have the beginning of my code here(it's a button):
Private Sub Button14_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button14.Click
Shell("C:Program FilesMicrosoft OfficeOFFICE11EXCEL.EXE")
AppActivate("Adobe Reader")
'copy stuff wants to go here
'Then i want to paste into Excel
AppActivate("Microsoft Excel")
'Then run a macro
(PERSONAL.XLS!Eden)
End Sub
Adobe Reader will always be running.
I'm trying to copy all text data from Adobe and paste it into Excel. I'm having trouble trying to mimic pressing [Ctrl-A] [Ctrl-C] and then mimic the paste [CTRL-V] into excel, then running the Macro in Excel.
I have a requirment to be able to copy a data range from one sheet to another. However each time the macro is run I need to be able to change the ROW the data is pasted to via user input.
EG First time macro is run, range to be copied from sheet 1 is A1:D1 and then pasted to sheet 2 range A5:d5.
the second time the macro is run I need to tell it to paste the data from Sheet 1 A1:D1 to Sheet 2 range A6:D6.
I guess the ultimate way to achieve my need would be for excel to find the last row of data on sheet 2 and automatically paste to the next free row, but thats way beyond me.
i am trying to record a macro that copies and pastes data from a webpage into a sheet in excel and then copies and pastes different data from a different webpage into another sheet in excel.
when i replay the macro it just pastes the same data twice instead of 2 different sets.
i am obviously making a basic error - is the way i copy and paste?
I have an index page with all my employee numbers and a summary page.
All my employees work on a time payment basis.
So for every Employee there is a worksheet with a calculator that determines their working hours.
I need a macro that copies the information on every worksheet to the summary worksheet.
On the worksheets the information is in calls: A53:F53
The Macro needs to paste that information under each other. So for instance employee 255 has a worksheet with the label of 255. His information needs to be pasted in the summary in cells A2:F2.
The next employee is 503, he also has a worksheet with the label of 503. his information is in cells A53:F53 (the same for all the employees). This needs to be pasted to the summary page in Cells A3:F3 (underneath employee 255)
I have 802 worksheets and 1 Summary. All the information for all the employees is in A53:F53.
I tried to do a record macro, it worked but excel gives me an error that sad : Procedure to long.
this is the code that i used:
Sheets("002").Select
Range("A53:F53").Select
Selection.Copy
Sheets("Summery").Select
Range("A2").Select
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
Every employee has a coding like this..... so you can understand that excel thinks the procedure is to long.... ha ha ha..
I need the macro to paste only values and not the formula.
I have an excel form that I fill out when I service a vehicle. This form has a couple of cells that I would like to transfer to different workbooks by way of a macro.
The form cells that I want to transfer are labeled as follows:
InvoiceNumber or cell Q3
Date or Cell R5
TotalLabor or cell R31
TotalParts or cell G31
Tax or cell R40
I have 3 external files named:
Tax - this file has 4 columns: Date, InvoiceNumber, Tax
Parts - this file has 4 columns: Date, InvoiceNumber, TotalParts
Labor - this file has 4 columns: Date, InvoiceNumber, TotalLabor
I would like to have each external file copy the info into the next row and keep a running total at the bottom.
I would now like to adapt it to do something else. The code is as follows:
Sub addtaskstnmtce()
ActiveSheet. unprotect
Application.DisplayAlerts = False
myrow = Cells. Find(" Total Station Electrical / Cable / Mechanical / Civil Maintenance Estimate").Row - 6
mycell = Cells(myrow, 2)
mynum = Right(mycell, Len(mycell) - InStr(mycell, "#")) + 1
With Range(Cells(myrow, 2), Cells(myrow + 5, 2))
.EntireRow.Copy
.EntireRow.Insert Shift:=xlDown
End With
Application.CutCopyMode = False
Cells(myrow + 6, 2) = "Task#" & mynum
Application.DisplayAlerts = True
ActiveSheet.protect
End Sub
i have two work sheets open. with the press of a button on the screen, i need a selection of the sheet to be coppied, different data per button clicked. In the other open sheet depending on which button the user clicks on, i need that data to be pasted. I have tried it by using the record button, but when i have finished recording, the paste option does not come up in the next sheet. I know it can be done manualy, but i have lots of data all over the place.
View 4 Replies View Related