Create Popup Of Range On Another Worksheet?
Feb 3, 2014
.How do you create a popup windows which shows cells on another worksheet that you can change the values based upon a index / match or vlookup?
I select a cell that has a vaule of 102.
then Popups a box which matches that 102 range in another worksheet and shows pulldown (yes no). (Theres about 5 cells (side by side) of yes no pulldowns.
I want the user to then select the values they want and close the popup box.
User selects the following cell with 103. and then goes thru the same process.
View 3 Replies
ADVERTISEMENT
Mar 10, 2014
How to use an Excel worksheet I have, so I decided to make a button with a macro, which when clicked a kind of message box pops up and you can read the tutorial. When you are done you just press ok and the pop up window closes.
I know about vba I just have to use msgbox, keep on adding lines with the text and that's it! But after many attempts I found out that it ain't that easy.
[Code] ......
So I made something like this:
[Code] ....
but at a point I got this error: "Too many lines continuations".
I wanna make something that looks a bit like this: p69pxC8.jpg
But way simpler, with my text, a scroll bar to roll up and down to read and an ok button at the end. I don't need special text with hyperlinks or anything at all, plain text does the job.
It just now crossed my mind, would it be viable to also add a "Print" button next to the "Ok" button in the pop up windows with the tutorial, so when the "Print" button is clicked, the tutorial is printed?
View 7 Replies
View Related
Nov 18, 2009
Is it possible to create a popup window that contains drawing objects?
I created a "form" with the objects, but I don't know how to use the form.
I want to have this image, or form, or whatever it is, to popup when the user clicks a cell. Is this possible without getting into programming?
Can it be hidden and then made visible when the cell is selected?
View 8 Replies
View Related
Aug 11, 2009
I'm reading up on and learning VBA slowly.
I'm trying to create a pop-up error within a macro.
The macro is as follows:
View 11 Replies
View Related
Jan 25, 2010
I would like to create a simple right mouse button popup menu for the text box on a userform. I just want Copy and Paste and the functionality that goes with them if possible.
View 2 Replies
View Related
Sep 21, 2012
Creating a pop up message when a cell value is over 100%.
I have in cell T21 "=sum(t7:T21) but I'd like to give a pop up message when this cell value is over 100%.
Excel 2010
windows XP
View 2 Replies
View Related
May 16, 2014
What I'm basically trying to do is make a code that looks at where the "x" values are in my range and if the month matches the current month, open a pop up that says "Service Required: Equipment Name" when the file is opened.
If it's any easier, an actual date could be written instead of an x.
An alert system for service required if you will. I have attached a file.
TestSchedule.xlsx
View 4 Replies
View Related
Nov 3, 2008
How do you create a pop-up box that opens every time a specific worksheet is activated that asks "What was the first month of activity?" The month that is entered needs to populate in Cell "A7". I also want the 11 months following the answer to the above pop up box to populate in cells A8-A18.
View 7 Replies
View Related
Feb 20, 2014
I have a macro that using a list of values in a range, checks if there is a corresponding worksheet and if not, use the Template to create one, rename the worksheet and add the value into a cell.
I now have 2 types of template and based upon on the value in the range, I want it to create a worksheet using 'Template 1' for all values < 1000 and 'Template 2' for values > 1000.
Is it possible to amend my code for this?
HTML Code:
Sub CreateTimeline()
Dim rng As Range
Set rng = Application.Range("Projects[No.]")
[Code]....
View 2 Replies
View Related
Jun 2, 2009
I have a list of references in a range (A5:A98) in a worksheet called "Architectural". What I am trying to do is create a seperate worksheet based on each cell value in the range. However, rather than blank worksheets, I would like each new worksheet to be a copy of a worksheet called "Template". If possible, I would like to have the name of each worksheet also put into cell B2 of each copy.
View 2 Replies
View Related
Dec 21, 2011
I have file contains two worksheets. 1st worksheet named "list" and the 2nd one named "Template". I have a range in WS "List" let say a1:d20 that contains names. This range is not fix, it might be more or less. I need creating new worksheet using worksheet "Template" for the new sheets in the mentioned range as follow:
"Create new worksheet for each name in this range."
List is not unique, some names are duplicated. If the name repeated, create only one. Use worksheet template for each new worksheet created.
View 2 Replies
View Related
Mar 20, 2012
I am trying to write a simple macro to create a chart over the used range in a worksheet. The first part of the macro correctly selects the used range which in this case is A1 to F19 when I single step through the macro. A listing of the macro is shown below:
Code:
Sub AddChartObject()
'
Sheets("Sheet1").Activate
Range("A1").Select
Range(Selection, Selection.End(xlDown)).Select
Range(Selection, Selection.End(xlToRight)).Select
[Code]...
When I place the formula given in MyArea as an argument for the source data, I receive a syntax error, so obviously it is the wrong argument. Numerous attempts to correct it also failed. As a sanity check, I placed the used range in an argument for the source data and was able to create the expected chart. fix the syntax error in the macro
View 4 Replies
View Related
Jan 19, 2010
I have a macro below that gives me a popup box that lets me type in the new sheet i want to access. etc(sheet1.xls) It give me 2 boxes one i must type the old sheet i currently access etc(sheet0.xls) and the next is the new sheet i will now be accesssing.
Is there a way to change this so i only get one box that will let me type in the new sheet i want to access?
View 11 Replies
View Related
Feb 6, 2013
I have a userform with 17 checkboxes that their captions should correspond with column A range ("A2:A18) on a worksheet.
Is there a way in userform_initialize, or activate, to create the captions from that range?
I could type the code 17 times like;
Code:
me.checkbox1.caption = wb.worksheets("area").range("a2").value
I was curious to know if it could be looped? Textboxes on the same userform.
View 6 Replies
View Related
Nov 23, 2012
I'm using the code below to form part of staff resource spreadsheet, but I'm having a little difficulty with a piece of the script.
Code:
Option Explicit
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rInt As Range, res As Variant
Dim cell As Range
Sheets("Input").Protect "password", UserInterFaceOnly:=True, AllowFiltering:=True
[Code] ....
The piece of the script which I'm having difficulty with is this:
Code:
For Each cell In Range("B7:B400")
If cell.Value = "No" Then
MsgBox "If " & cell.Offset(0, 1).Value & " has left R&D, please remember to delete any future resource forecasts"
End If
Next
When the cell value has changed to 'No' the pop up message appears, but for some strange reason the message is shown 5 times, despite their being only one record.The other problem I have is if I add another record and change the value to 'No' in column B, the message is shown twice, once for the previous record and the second for the new.
View 5 Replies
View Related
Jan 31, 2010
I am coding a right-click popup and need some help specifying the range to show in the popup. The code is listed below.
How I can I adjust this code to show the range O400:O440 only? Right now it shows the entire column from O400 down.
Private Sub Worksheet_BeforeRightClick(ByVal _
Target As Range, Cancel As Boolean)
Dim objBar As CommandBar
Dim objButton As CommandBarButton
Dim introw As Integer
introw = 400
Cancel = True
On Error Resume Next
Application.CommandBars("avail").Delete
On Error GoTo 0
Set objBar = Application.CommandBars.Add("avail", msoBarPopup)
Do Until IsEmpty(Cells(introw, 15))
Set objButton = objBar.Controls.Add
With objButton
.Caption = Cells(introw, 15).Value
End With
introw = introw + 1
Loop
objBar.ShowPopup
End Sub
View 9 Replies
View Related
May 1, 2007
writing the correct command to auto popup a calendar when a user doubleclicks in any cell in a range of cells. I have the code for individual cells but would like to apply to a very large range of cells and do not know what the correct command is.
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
Select Case Target.Address
Case "$C$160", "$C$161", "$C$162", "$C$163"
Cancel = True
Call OpenCalendar
End Select
End Sub
View 6 Replies
View Related
Jul 10, 2013
I have an excel file with many worksheets. I want to get a pop up message providing definitions of different subjects when they are entered from a drop down list in a specific range within a column to improve the users understanding of the subjects.
Worksheet 1
Range (where I want the pop up message to be valid): J85:J385
Subjects from drop down list in specified range: "x,y,z"
Pop up message: "Definitions of x,y,z"
Do I have to make a new module, or write the macro in the selected worksheet? What should be the settings of the macro (general, worksheet, declarations etc.)
View 7 Replies
View Related
Feb 7, 2014
I need to reference the projected and actual expenses from the total on worksheet 'expenses' So i did so, however, if I change the drop down on the expenses worksheet to only display housing data, then the projected and actual expenses on my budget worksheet changes as well to the new data portrayed on the expenses worksheet.
I need to reference the cell, without it changing when I change the category display, but I need the cell to change accordingly if I enter new data in the overall tablet on the expenses worksheet.
Or do I need to create a seperate worksheet that has the data in and reference my cells on my budget worksheet to that new worksheet?
View 1 Replies
View Related
Sep 2, 2013
The new worksheet is created to the left of the existing source worksheet.
View 2 Replies
View Related
Feb 11, 2009
I have code in a worksheet that creates a new worksheet when clicking a button:
View 3 Replies
View Related
Dec 5, 2012
I am trying to write some code that will check a range of names within a worksheet and if there is a sheet with a name from the range excel should ignore it and move on to the next range. If no such worksheet exists it should create it. When the code encounters a blank range, it should stop the code.
I have tried several different variations, and either I can't make the "check if exist" statement to work, or I am having problems with it not working for more than one loop. After reading previous posts on this forum, I have tried with err.clear, next ws in worksheet and all types of codes but I can not make it work.
When I am running the code, it will stop on second loop at [If (Worksheets(rangename).Name "") Then] and give me a runtime error 9 - subscript out of range.
This is the code:
Sub CreateSections()
Dim i As Integer
Dim rangename As String
Dim Newsheet As String
Dim Nextrow As String
Application.ScreenUpdating = False
Sheets("Example").visible = True
[Code] .........
View 2 Replies
View Related
Apr 24, 2006
how do I copy the last worksheet (e.g. sheet3) using the name keyed in the textbox1 as a sheet name? I got the following code but it creates 4 worksheets instead of just one with the new name.
Worksheets("invsetting").Activate
ActiveWorkbook.Sheets.Copy after:=Worksheets(Worksheets.Count)
Worksheets(Worksheets.Count).Name = Ucase(Textbox1.value)
If I got 10 names in column "C", can I use the following code to create the worksheets with names in column "c"?
For k= 1 To 10
ActiveWorkbook.Sheets.Copy after:=Worksheets(Worksheets.Count)
Worksheets(Worksheets.Count).Name = Ucase(range("c" & k).value)
Next
View 2 Replies
View Related
Jul 21, 2013
I have a range that I named. Let's say that range is called "RangeX". Let's say RangeX is defined by B2:E10
I have a series of formulas that give me the row and column numbers of the starting and ending cell of a subset range I want to create within RangeX. Let's say the starting cell is defined by (1,1) and the ending cell is defined by (3,4) within RangeX. Translated, the starting cell would be B2 and the ending cell would be E4.
How do I create a subset range using the starting cell (1,1) and (3,4) in VBA? I would like to use the row/column reference as RangeX itself could move around.
View 1 Replies
View Related
Oct 26, 2012
When inputing data into a cell on the main tab I want it to automatically create a worksheet, copy the contents of "Master Tab" onto the new worksheet, and name the new worksheet/tab the same as the value in the same cell on the main tab. The below link initially seems to work except that it only copies the active worksheet instead of another unactive worksheet of my choosing like "Master Tab".
[URL]
View 3 Replies
View Related
Jan 30, 2014
im currently working on contact details for each of our client. Attached here is the sample worksheet im currently working on. As the title suggest is it possible if i click the company name i will be directed to its contact details on the other sheet?we need a worksheet that functions like this: if we click the company name, it will direct the user to its contact details or will display ONLY its contact details.
View 14 Replies
View Related
Jul 26, 2008
creating a button (using VBA code) in a excel worksheet that can initiate a range of output data in a col (say (C1:C100)) by activating the therein formula of each cell (same as what F2 does) and then entering the cell.
Actually I have to do manually each time for each output cell after opening the worksheet that I don't want.
View 9 Replies
View Related
Dec 8, 2008
I have seen an Excel spreadsheet someone made that has a kind of interface built into it. There are areas where you can type in variables and buttons to clink on that do calculations - and a box that shows the result.
View 3 Replies
View Related
Sep 17, 2009
I have a userform which collects fuel data from a pump and populates 2 worksheets (pump1) and (pump2). What I am tyring to accomplish is the following:
When fuelling is finished for the day, the operator selects the (Shutdown) button. When this happens I need the userform to perform the following.
1. For each worksheet (pump1) and (pump2) create new worksheets named (pump1_date) and (pump2_date).
2. Populate these new worksheets with the entire data from the original worksheets.
3. Clear out all but the last row of data from the original sheets. The last row contains the meter readings for the fuel pumps and needs to stay as an opening ballance for the next day. This last row to become the top row of the original sheet.
View 7 Replies
View Related
Feb 26, 2008
I need to create new worksheet with all the rows which has qty (column A) value of 1 and above by clicking on a submit button....
View 9 Replies
View Related
