I have a userform with 17 checkboxes that their captions should correspond with column A range ("A2:A18) on a worksheet.
Is there a way in userform_initialize, or activate, to create the captions from that range?
I could type the code 17 times like;
Code:
me.checkbox1.caption = wb.worksheets("area").range("a2").value
I was curious to know if it could be looped? Textboxes on the same userform.
I'm trying to create a dynamic msgbox that will display what data has been updated based on checkbox selections in the userform. I've named my checkboxes as Carey, Keith, and Juliet.
Ideally if only Carey's data has been updated, I'd like the msgbox to say
' Data has been Updated for:
- Carey '
If Carey and Keith's data has been updated, I'd like the msgbox to say
'Data has been Updated for:
- Carey
- Keith '
etc.
MsgBox ("Data has been Updated for:" & vbnewline & _
If CAREY.Value =true then "- Carey" End if & vbnewline & _
If KEITH.Value =true then "- KEITH" End if & vbnewline & _
If JULIET.Value =true then "- Juliet" End if & ")
I have userform which shows days in month & populated Listbox for cell values. I want checkboxes to be ticked and Textbox to count when conditions are met, for each day. Range is, example (for 1st day) from E3:E318. My code so far is :
[Code] .....
So, When "MIN1" reaches value of 2, checkbox is ticked - If more than 2 then Msgbox ; When "MIN5", I want to be counted in Texbox ;
I am quite new on this forum.
I would like a dynamic range to be multiplied with 2. The Range is always start in cell H14 to P?
I have multi checkbox in column F,
So here is an eksampel: If checkbox in F4 is true then Range H4:P4, should by multiplied with 2 else if the chekbox is FALSE, then only multiply with 1.
I want to entry data in the Range H14:P? by this code
Private Sub Worksheet_Change(ByVal Target As Range)
'Do nothing if more than one cell is changed or content deleted
If Target.Cells.Count > 1 Or IsEmpty(Target) Then Exit Sub
I want to do is use a userform to automatically create a graph from the data that is shown in the worksheet. The data in the work sheet will grow and shrink all the time. Am i right in thinking I am meant to create a dynamic range? I know how to do it but am not too sure what I am meant to be naming. And secondly I am not too sure how I set up the button to produce the graph.
View 4 Replies View RelatedI have data in range J2:J365 , H368:H401 & J403:J827. i want to check wether this range have negative values or not if yes load all negative values in the listbox1 by clicking checkbox.
View 3 Replies View RelatedI have a macro that using a list of values in a range, checks if there is a corresponding worksheet and if not, use the Template to create one, rename the worksheet and add the value into a cell.
I now have 2 types of template and based upon on the value in the range, I want it to create a worksheet using 'Template 1' for all values < 1000 and 'Template 2' for values > 1000.
Is it possible to amend my code for this?
HTML Code:Â
Sub CreateTimeline()
Dim rng As Range
Set rng = Application.Range("Projects[No.]")
[Code]....
.How do you create a popup windows which shows cells on another worksheet that you can change the values based upon a index / match or vlookup?
I select a cell that has a vaule of 102.
then Popups a box which matches that 102 range in another worksheet and shows pulldown (yes no). (Theres about 5 cells (side by side) of yes no pulldowns.
I want the user to then select the values they want and close the popup box.
User selects the following cell with 103. and then goes thru the same process.
I have a worksheet called "ComplaintData".
In this worksheet I have data in following range : "N1:V2".
N1 to V1 is headings and N2 to V2 is data transfered from listbox on userform.
I am trying to print this range via command button on my userform.
I am wondering anyone can help me with the code for selecting and printing this range when user clicks on the "Print" command button on my userform?
how I can format this print out to look different than the tabular format? I mean if possible I would like to print this in portrait, fit to one page and possibly not look like a table. (If it has to look like a table then I will have to go with landscape as the table wont fit portrait without getting too small and un-readable)
I have a list of references in a range (A5:A98) in a worksheet called "Architectural". What I am trying to do is create a seperate worksheet based on each cell value in the range. However, rather than blank worksheets, I would like each new worksheet to be a copy of a worksheet called "Template". If possible, I would like to have the name of each worksheet also put into cell B2 of each copy.
View 2 Replies View RelatedI have file contains two worksheets. 1st worksheet named "list" and the 2nd one named "Template". I have a range in WS "List" let say a1:d20 that contains names. This range is not fix, it might be more or less. I need creating new worksheet using worksheet "Template" for the new sheets in the mentioned range as follow:
"Create new worksheet for each name in this range."
List is not unique, some names are duplicated. If the name repeated, create only one. Use worksheet template for each new worksheet created.
I am trying to write a simple macro to create a chart over the used range in a worksheet. The first part of the macro correctly selects the used range which in this case is A1 to F19 when I single step through the macro. A listing of the macro is shown below:
Code:
Sub AddChartObject()
'
Sheets("Sheet1").Activate
Range("A1").Select
Range(Selection, Selection.End(xlDown)).Select
Range(Selection, Selection.End(xlToRight)).Select
[Code]...
When I place the formula given in MyArea as an argument for the source data, I receive a syntax error, so obviously it is the wrong argument. Numerous attempts to correct it also failed. As a sanity check, I placed the used range in an argument for the source data and was able to create the expected chart. fix the syntax error in the macro
Can it be made in VBA as follows:
I have made a userform with the initialize routine. On this there are checkboxes which I would like to be selected for a YES.
When the YES (checkbox) is being selected I than would like to see in the active userform an already made and "hidden" textbox to enter a value for confirmation of a quantity to order.
I have been loking for some sort of Private Sub Userform Change() routine, but can not find this type of routines
I have a macro which will copy a row of data from one sheet and paste it onto another sheet. I need some code to insert a checkbox on the left of every new row of data, (presumably something located in column A.)
View 3 Replies View RelatedI am trying to do is develop a electronic visitors log in excel that has three statements visitors must read and accept before they can enter. I have a userform with date/time, name etc, then the three buttons that open another user form with the statements for them to read and 2 command buttons (Accept and Decline), Accept takes them back to the log-in userform and Decline closes all forms.
The problem I am having is I can’t get the checkbox on the log-in form next to each statement to go true when the accept button is clicked for said statement. I would like to disable the checkbox on the visitorsignin form so the only way it goes true is from the statement form.
I hope I explained myself well enough for someone to understand what I’m trying to do, the code is not finished yet either, still waiting for signature pad to come in so I can paly with it and figure out how to incorporate it into the file.
I have a 20 number of CheckBoxes in a userform. But only the first checkbox has a special function if it is selected alone. So I want to set a condition if only it is selected. How may I express this?
Something like:
Code:
If only the Me.Checkbox1.Value = True Then
'Do this
Else
'Do that
End If
On my excel 2007 UserForm I have a CheckBox with 18 possible or multiple selections of reports (word.docm)
what I would like to do is, when selected they would be sent to printer.
Here's what code I have so far, something is missing, I'm not sure
Private Sub CommandButton2_Click()
For x = 1 To 18
If Controls("checkbox" & x) Then
Select Case x
Case x = 1
worddoc = ActiveWorkbook.Path & "Inspection ReportsCover Page.docx"
Case x = 2
worddoc = ActiveWorkbook.Path & "Inspection ReportsClient Information.docx"
Case x = 3.....................
i am having is i have created a userform that automatically opens when i open the workbook, I have placed checkboxes on the userform and i need them to remain checked even after the workbook is saved and closed, but whenever i reopen the workbook the checkbox are unchecked again
View 2 Replies View RelatedI would like to know if there's a way to create a checkbox list in a cell that influences other cells:
For example, I would have column A as "Materials Accepted", and each cell would have a dropdown list with the options "Wood", "Drywall", and "Metal", in checkbox format. Then to the right of that, I would have each of the Materials as actual columns so that column B is "Wood", column C is "Drywall", and column D is "Metal".
The way I would want it to work from there is that whatever options I select from the dropdown, it would then put a TRUE flag in that column. So if I select "Wood" and "Metal" on the dropdown checkbox list, columns B and D would both read TRUE on that particular row.
Here is a screenshot of a mockup I did in paint - [URL]
Basically on each row, I would select a number of Materials, and the following columns for those Materials would populate TRUE for the ones that I selected on that row. This was just an example, but I would scale this up to around 30 Materials for hundreds of rows/entries.
I currently have a macro which will copy a row of data from one sheet and paste it into the first blank row on another sheet "Invoices".
Now I want to write some code that will insert a checkbox to the left of each new row of data, (presumably in column A). I'm getting confused because I have never worked with checkboxes before and when I search the net for info. I'm getting some hits on Userforms (which I don't want), others on ActiveX controls and still others on form controls (what I think I need).
Here is some more info on what I'll be doing with them:
I am writing a second macro to see which boxes are checked. For any checked boxes I want the respective data to be sent to a mail merge and then the entire row, data and checkbox, to be deleted.
This adds a minor complication because if I delete a row, then all rows and checkboxes below it will need to move up. Is this something that will happen naturally or do I need to create some special code to handle that.
The final complication is that the data is data is going to sorted sometime between the creation of the checkbox and its later deletion. I'm wondering whether its necessary to keep a checkbox associated with a particular row, or if I can just tell the checkbox to figure out which row it exists at.
So, to sum up. I need to:
First - Learn how to create a checkbox
Second - Scan through all existing checkboxes and see which ones are checked
Third - Delete rows and sort the data while maintaining one checkbox for each row of data.
I want activation of userform to hide worksheet, but as soon as the Userform is closed, the worksheet should show.
I have attached file to aid.
I have a userform with lots of checkboxes and I would like to be able to create either a GIF file of the userform using VBA (if it's easy), or export to a .txt file all the checkbox labels and their respective values (i.e. TRUE or FALSE) which I think might be more easier to code.
View 9 Replies View RelatedThe code listed below checks to see if any checkboxes are checked via a form and if they are then populate a string variable with text to build out a range to be used for a Defined Name Range in excel. The code works but I was wondering if the same functionality could be written better.
Private Sub cmbRun_Click()
Dim SelectedRange As String
If CheckBoxML.Value = True Then
SelectedRange = "Revenue!$M:$M"
Goto jump1
Else
If CheckBoxML.Value = False Then
Goto jump1
jump1:
If CheckBoxSL.Value = True Then
SelectedRange = SelectedRange & ",Revenue!$N:$N"
Goto jump2
Else...............................
OK I feel really stupid on this. I must be overlooking something very obvious.
If you look at the attached userform there are some checkboxes where the "check" has a bold appearance, and others where the check is not bold.
If you examine the properties of the checkboxes in VBE, they appear to be identical.
Could anyone please help me frame a vb code for the below explanation?
I have a sheet where in some terms are provided. Users have to open this sheet and check its description. After going through all the terms, they have to select the required terms using a checkbox given beside these terms. After checking the reqd. boxes, they would click on 'Submit' at the end of the sheet.
Once Submit is clicked, a new excel workbook should open up with the selected terms as various column headers.
I would like to know if there's a way to create a checkbox list in a cell that influences other cells:
For example, I would have column A as "Materials Accepted", and each cell would have a dropdown list with the options "Wood", "Drywall", and "Metal", in checkbox format. Then to the right of that, I would have each of the Materials as actual columns so that column B is "Wood", column C is "Drywall", and column D is "Metal".
The way I would want it to work from there is that whatever options I select from the dropdown, it would then put a TRUE flag in that column. So if I select "Wood" and "Metal" on the dropdown checkbox list, columns B and D would both read TRUE on that particular row.
Just wondering if something like this is possible, as I wanted to apply this concept to a much larger scale (About 29 columns for 29 Materials, scrolling left and right is really time consuming). So far I've only seen guides on how to create a SINGLE checkbox on a row, and none with multiple checkboxes that would function in this manner.
I currently have a user form and am trying to make a counter to that will increment if the check box is not selected, but will not increment if the check box is selected.
I am assuming I could use an if then statement for this, under the command_click OK. but I cant get it to work.
I'm trying to get a checkbox in a user form to prepopulate depending on what's in cell H5.
Here is the line of code that I need rewriting (in bold):
Sub Userform_Initialize()
LabelPolicyNumber.Caption = ActiveSheet.Range("B5").Text
LabelSponsorName.Caption = ActiveSheet.Range("D5").Text
If Application.WorksheetFunction.IsNA(ActiveSheet.Range("H5")) = True Or ActiveSheet.Range("H5") = "" Then CheckBoxHalifax.Value = False Else CheckBoxHalifax.Value = True
End Sub
H5 contains a vlookup formula, so depending on other variables it can either have a value ("Halifax"), an error (#NA) or be blank. I've
It seems Excel will only evaluate the first statement and ignore the Or statement, meaning when H5 is blank Halifax is checked off when I load the user form.
I'm working in Excel 2007 on Windows XP.
I have a userform that creates labels and checkboxes for those lables on the initialize event based on an if statement. I would keep getting an error on a line where I try and use the name of one of those created checkboxes of "variable not defined" as if it hasn't been created, but it was.. Here is the code for the creation:
'Option Explicit
Private Sub UserForm_Initialize()
'dynamically add the tickers and funds based on if there is any data inputs for them.
'declaring variables
Dim lbl As MSForms.Label
Dim i As Integer
Dim x As Integer
Dim newcheckbox As MSForms.CheckBox
'selects the summary page
Sheet1.Select
For i = 7 To 65
If Cells(i, 3) "" Then..................
I am having a little bit of difficulty find ways to effectively incorporate a checkbox panel into a form interface. What I am trying to do is all the user to select using checkboxes which of 31 separate columns will automatically be deleted or not deleted. The method I have been using is to create 31 checkboxes, and then use the value of the checkbox (true/false) to determine a value in an array, which then can be used to delete the column by a separate sub.
However, I am interested in being able to have the checkboxes start checked or start unchecked by values contained in a different array. My problem is that I am unable to reference the checkbox itself until the form containing the checkbox is opened, but at that point I don't know of a way to cause the desired checkboxes to automatically be selected without placing a command button that must be pressed to fill them in. Essentially I want to be able to open a userform that has checkboxes preselected.
