I have a table and say I would like to create a unique list from column2 and store the list in a spearate sheet. Give this unique list a name.
Use this unique list in a FOR EACH loop and apply autofilter to two tables on two different sheets.
(one table is from which the unique list was created and other in a different sheet)
ive got 1 sheet,with 2 printable pages in it. 1 being the summery page and 1 being the inventory page.
what i would like to be able to do is.
on the summery bit ive got a code in A22 and a number in G22
to save me time i need to create a list in the inventory bit starting at A62
im hoping it will look somthing like this
A62 = what ever the code is ( JR269 ) in A22
A63 = same code and so on until i have 26 in a list, 26 being G22
I've searched the forum and believe this thread to be the closest to what im looking for, but its doesnt completely apply: matrix to list conversion. I have an attachment to support my questions (see attached). I have a matrix of words (strings) that contain repeating and non-repeating contents. The matrix also has spaces which are of no value. Essentially, the VBA needs to ' analyze' this matrix and create a consolidated frequency list (as shown in the file).
The matrices are HUGE and therefore some of the clumsy VBA i am using is turning out to be a bit inefficient. The file also contains formulas and such that I cannot use AutoFilter nor can I use Insert or Delete rows...so the VBA shouldnt use those either.
I have a list of data which looks like this
Column B
Name
---------
Jones, Bob
Jones, Bob
Jones, Bob
Smith, Mike
Smith, Mike
Smith, Mike
Calai, Dave
Calai, Dave
Calai, Dave
Etc...
What I want to do is take the entire list and create a distinct list that I can use in a named range then use a validation list to have a drop down within a different tab.
I have a list of references and I need to pull from a database. The database contains more than one row with my reference, so I try doing something like this:
Sub ()
Range("B11").Select
Do Until IsEmpty(ActiveCell())
If ActiveCell = _
"7501" Or _
"7507" Or _
"7508" Or _
"7509" Or _
"7618" Then
But it does not work, besides I need to add more references. Could some one know a better way to do this?
I have some raw data of employment records on one workbook and from this i need to autopopulate there information into another workbook.
I need to split the records up by the different departments they work . I.e so what i am after if possible is -
If The department name in the raw data matches column A1 for example then it auto populates down in B2 all the names of people who work in that department .
In column A I have values starting at row 4, ranging up to row 1004.
in coulumn Q (starting at row 3) I'd like a list of unique entries from column A
I know this line is my problem
If Range("A" & I) Range("Q4:Q30") Then
but i'm not sure how to compare against all values in a range
Sub FilterSymbol()
Dim I As Integer
Dim X As Integer
X = Range("O2")
I = 4
Do
If Range("A" & I) Range("Q4:Q30") Then
Range("Q" & I) = Range("A" & I)
I = I + 1
Else: I = I + 1
End If
Loop Until I >= X
End Sub
I have a number of text columns, side by side in a worksheet, containing names. I wish to combine these columns into one new column, removing any duplicates, to create a single list of names. Is there a simple way to do this?
View 3 Replies View RelatedI have a column that looks something like (it is VERY long and has over 20 different names):
abe
abe
abe
abe
ben
ben
ben
cat
cat
john
john
john
john
tex
tex
I want to create another column (automatically) that lists each of of those once:
abe
ben
cat
john
tex
Any idea of how I can do this automatically?
So far I created code that creates a Distinct Unique item's list for one column. It works as it should but I want to modify the code to create a Distinct Unique item's list for two columns that are related to another i.e. a person's name to their license #.
Here is the code below that works for one column only:
[Code] ......
I have a list of project numbers that is over 7000 rows long [example attached].
Many numbers are repeated. This list comes out of a financial reporting system.
I need to extract a list of unique numbers in numerical order. I have two solutions working, one with SUMPRODUCT formulas and one with MACRO. Here's the MACRO solution. But it takes about 20 seconds to execute. I am just looking to cut down on execution time. I am using this macro a few times on different lists in the same program. Is there a better [faster] way to do this?
I am trying to create a macro that will create a unique list of the values in the same column across 5 worksheets, "Question1", "Question2", etc, and place the list in a new worksheet, "Summary".
The values are in column A in all of the worksheets, and the number of rows in each worksheet will change each day. I need the unique list to be added to the sixth worksheet, "Summary".
Also, after the list is created on the Summary worksheet, I need a count of each field by worksheet and a total. This is how I currently have the Summary set up:
Part Type|Total|Question1|Question2|Question3|Question4|Question5
Name|=SUM(C2:F2)|=COUNTIF(Question1!$A:$A,A2)|
=COUNTIF(Question2!$A:$A,A2)|=COUNTIF(Question3!$A:$A,A2)|
=COUNTIF(Question4!$A:$A,A2)|=COUNTIF(Question5!$A:$A,A2)
Any way in ms excel to create unlimited unique validation list. i am working on a small data where one colums data(Validation list) changes on the selection of previous column data filed. i am using indirect function with defined name range. but ms-excel is not accepting new names now and still i have 75 datagrops left to define and validate.
is there any formula or vba code to fix this problem.
I have a list of sales events that ran at various venues, together with how many people attended and how much revenue was brought in by sales. This data is arranged by week. One venue will never have more than one event per week, but different venues may have sales events on the same week.
My table looks like:
In reality this list could be thousands of rows long.
“Event week” is the calendar week of the event. “Weeks open” shows for each event how many weeks that venue has been open (may or may not be useful!).
What I need to do is to be able to pick a number of weeks (preferably changeable by entering into a cell) and have a list produced of each venue that has run for at least that many weeks, and the sum of people and sales in those first X weeks. My idea of output, if the user input “2” as the number of weeks would therefore look something like:
Note that
1)only venues that have run at least 2 meetings are shown in the output
2)even if venue has run over 2 meetings, only people and sales figures from the first 2 are summed up and displayed.
In this case. Later on I need to produce a frequency chart/histogram grouping the results into categories, but I know how to do this as long as I can get to the step before – but wanted to mention it in case there are shortcuts.
Have been battling with this with pivots, database functions, array formulae etc. for a long time.
Attached is the spreadsheet with sample data. The red table is the part I am stuck on. The solution has to work in Excel 2003.
I have a test sheet thus :
+ABCDEFG
1Bob11234
2Sally2
3Ann3
4Emily4
5Lexi3
6Bill2
7Josh1
8Jacob2
9Mary3
10Gary4
11
In D2:D11, I want a non-duplicate list of all the "1" names, i.e., Bob and Josh. In E2:E11, a list of all the "2" names (Sally, Bill & Jacob), and so on. Sorted would be nice, but not necessary. When new names and their numbers are added to A1:B200, they need to automatically show up in D2:G:201 as appropriate. I've looked over VLOOKUP, INDEX, MATCH, etc., but all seem to simply return the first and not every match. Maybe I'm just missing it.
Is this possible without VBA? Not that I have any objection to it, but delving into and learning it is a little outside the available time I have now. If it takes VBA I'll address it when I can free up some time.
In Excel I recorded a macro by carrying out some operations and then copied the code into VBA code window to the click event of a button expecting the code would operate well but in vain. What is wrong with my operations? By cliking command button placed on a userform I want to copy the date of one column to another and the data thus copied into another column should contain only unique value.
View 4 Replies View RelatedI want to end up with a list of unique items (nothing repeated) from a variable length list starting in cell B5. That unique list is then placed in cell D3.
I am using the code below (found on Ozgrid) which almost works. But it seems to be dependent on what’s in column A (which I wish to ignore) for it to work.
How can I modify the code so that the results are based on column B only?
Dim Rng As Range
Dim fRng As Range
Dim lRow As Long
Dim Dest As Range
lRow = Range("B" & Rows.Count).End(xlUp).Row
Set Rng = Range("A5:B" & lRow)
Set Dest = [D3]
With Rng
. AutoFilter Field:=1, Criteria1:="1*"
Set fRng = .Offset(1, 1).Resize(.Rows.Count - 1, 1).SpecialCells(xlCellTypeVisible)
With fRng
.AdvancedFilter Action:=xlFilterCopy, CopyToRange:=Dest, Unique:=True
End With
End With
I have two lists of values in separate columns with condition in adjacent cells, all on the same sheet
List 1 consists of numbers from 1 to 12, column to the right is either blank or Free
List 2 consists of numbers from 13 to 24, column to the right is either blank of Free
List 1 starts in A2, B2 is either blank or Free
List 2 starts in D2, E2 is either blank or Free
In column G, from G2 i want it to list all values from List 1 and List 2 where their status is Free
I need to be able to pull information from 5 columns on 5 different pages, and pull all of the unique names out of it. From there, I need to create a list of all of these names. More often than not, this could only be three names, but I still would like this to be automatic because eventually it could be 50 or 60, and manually editing this list would get tedious. Lastly, is it possible to have a list create cells? For example: I have information on row 4, this one will start on row 6. My next group of information starts on row 14. That leaves 7 rows for information. I don't want to leave a large gap at the top of the page, so I'd like to be able to create cells if the list I'm trying to create has more information on it. Seems plausible in my mind, but I'm still new to excel.
View 14 Replies View Related[URL] ......
In that file, you can see there is a list of somewhat similar data across 5 columns. Some of the entries are duplicates, some are different by only one character. What I want to be able to do is generate a list of all the unique rows of data, taking into account the data from ALL 5 columns. The list can be on another sheet or simply just further down on the same sheet, that doesn't matter too much.
I could do it if it were just one column of data, but struggling trying to do it with several columns.
I will copy a report into sheet 1, starting in the same place(A1), on a weekly basis. The headers are: Item, Quantity & Price
Week 1's report shows the following:
Windows 5 $1.00
Doors 6 $1.50
Chairs 7 $2.00
Week 2's report shows the following:
Windows 3 $1.00 (change in quantity)
Tables 7 $5.00 (new item)
Chairs 7 $2.50 (change in price)
I need to have a rolling, unique list on Sheet 2 that will do the following:
- add new line items
- keep old line items while checking to see if the quantity or price has changed.
Therefore, after week 2's report is pasted on sheet 1, Sheet 2 should look like this:
Windows 3 $1.00
Doors 6 $1.50
Chairs 7 $2.50
Tables 7 $5.00
Here's the most important part: There will be formulas in Column D in Sheet 2 that I need to stay with each item. generating the desired result on Sheet 2!
I need a Macro to create a unique, rolling data list. On Sheet 1, a report is pasted(from outside source) in cell A3(Rows 1 & 2 are headers) on a weekly basis. It is always the same amount of columns wide(138). The number of rows will always vary but will never be more than 500.
Here’s what I need for Sheet 2:
-Column A should be a copy from Column A on Sheet 1 (data is ITEMS)
-Column B should be a copy from Column BH on Sheet 1 (data is QUANTITY of items)
-Column C should be a copy from Column BI on Sheet 1 (data is PRICE of items)
Here’s the challenge (when the new report is pasted on Sheet 1):
-Sheet 1. Find new ITEMS not on Sheet 2 and paste them at the end of the report on Sheet 2 along with their QUANTITY and PRICE
-Sheet 1. Find any ITEMS already on Sheet 2, then update new QUANTITY and PRICE from Sheet 1 onto Sheet 2
-Sheet 2. Leave ITEMS alone that are now missing from the new report on Sheet 1
I have a spreadsheet of 12 columns (A to L), with a list of student names under each down to row 31. Each column represents an after-school club that the child can attend.
However, a child can sign up to multiple clubs, so their name can appear in several places across the spreadsheet.
What I would like to do is have a 13th column which is an overall list of students who have signed up to at least 1 club, i.e. their name appears at least once in columns A to L.
How do I achieve this so that only unique entries are listed and duplicates are removed in this 13th column?
I am getting a run time error 1004 during a copy-paste of a named range. I've read other posts and the help file and know it's related to defining an object, but I'm not clear on exactly what hasn't been defined.
Private Sub Worksheet_Activate()
Dim lCell As Range
Set lCell = Worksheets("Sheet1").Range("C65536").End(xlUp).Offset(1, 0) ' find first blank cell in the column
With Worksheets("Sheet1").Range("AllDates") 'filter duplicate dates
. AdvancedFilter Action:=xlFilterCopy, CopyToRange:=Range( _
"E7"), Unique:=True
End With
Worksheets("Sheet1").Range("Dates_Filtered").Copy Destination:=Worksheets("Sheet1").Range("lCell") ' fails on this line
Range("Dates_Filtered").Clear
End Sub
Excel 2010. There is a limit to the usability of the
=INDEX($A$1:$A$1000,MATCH(0,COUNTIF($A$1:$A$1000,"<"&$A$1:$A$1000),0))
method. It seems like the limitation is in the Countif function going over 1000 (or some other size limit)
I have a list of ~1500 rows, of that there are approximately 55 unique items. Doing the unique array works correctly up until item ~40, upon which it fails by returning the 1st item only (for the rest).
Trying to debug, and pulling out the Match section, it functions up until 976 (that is
MATCH(0,COUNTIF($N$1:$N40,$C$3:$C$1500),0)
returns 976) anything after returns just 1 (1st item).
It seems to be a limitation on the text string size that COUNTIF can handle.
I have a database output file where one of the columns contains managers names, often more than once. I want to apply an autofilter on manager name and then copy the result to another sheet or sheets. My criteria for the autofilter is a variable pointing to a list of names that at present I maintain by hand; a for-each-next loop then cycles through the names.
What I would like to do, before running the autofilter code, is to create the list of names via code. This would then automatically pickup names that are missing.
The code I have so far is below:
Public Sub find_managers()
Dim managers1 As Range
Dim names1 As Range
Dim n1 As Variant
Dim n2 As Variant
In my mind it should check the names in the unique list against the imported list and add any missing names.
When I use the advanced filter like this:
Dim oRange As Range
Set oRange = ActiveSheet.Range("A:A")
oRange.AdvancedFilter xlFilterCopy, , Worksheets("Sheet2").Range("B1"), True
Under certain conditions, I get one duplicated value on "Sheet2". As near as I can tell so far it is only when the first cell in my "oRange" variable has a duplicate(s) of itself elsewhere in the list. The said value then appears twice in the list (only twice out of 19 instances in my particular test).
Also, I noticed that it is automatically naming the first cell in my destination range "Extract". If I change "B1" (above) to something else and run it again it throws an error because of the duplicated name "Extract".
What am I missing? What is the purpose of the automatic naming?
It looks like I need more to guarantee that my filtered list is always 100% unique.
I have a list of purchase order line items. Each Purchase order could have multiple line items, so the list could have many occurances of the same purchase order number. I have designed a pivot table which summaries line items by ordering area (one of the fields in the list).
This works fine but what I would also like to check is the number of purchase orders by area. How can I acheive this? I would prefer not to use any helper columns but will adapt my application if this is needed.
I have a Excel sheet and I have put Autofilter for a particular category I choose I need to count number of items in another column(autofilter) , for eg... there are two columns Category , Items When i choose a particular Category I need to count number of Items in the autofilter for that particular category?
View 9 Replies View RelatedI'm trying to use Advanced Filter to generate all the unique values within a list, only at times I want to Autofilter the data, then use the advanced filter to determine all the values of the slimmed list. For some reason, this works fine on column A, only returning the values that begin with a 1 when the column is filtered for all values beginning with 1. However, when I run the advanced filter on column 2 with column 1 filtered to all beginning with 1, all values all returned regardless of whether column 1 criteria is met. Either way, after the advanced filter, the autofilter has been removed.
View 7 Replies View Related
