Create Unique List Of Values Across 5 Sheets
Oct 13, 2011
I am trying to create a macro that will create a unique list of the values in the same column across 5 worksheets, "Question1", "Question2", etc, and place the list in a new worksheet, "Summary".
The values are in column A in all of the worksheets, and the number of rows in each worksheet will change each day. I need the unique list to be added to the sixth worksheet, "Summary".
Also, after the list is created on the Summary worksheet, I need a count of each field by worksheet and a total. This is how I currently have the Summary set up:
Part Type|Total|Question1|Question2|Question3|Question4|Question5
Name|=SUM(C2:F2)|=COUNTIF(Question1!$A:$A,A2)|
=COUNTIF(Question2!$A:$A,A2)|=COUNTIF(Question3!$A:$A,A2)|
=COUNTIF(Question4!$A:$A,A2)|=COUNTIF(Question5!$A:$A,A2)
View 6 Replies
ADVERTISEMENT
Jun 2, 2009
I need to be able to pull information from 5 columns on 5 different pages, and pull all of the unique names out of it. From there, I need to create a list of all of these names. More often than not, this could only be three names, but I still would like this to be automatic because eventually it could be 50 or 60, and manually editing this list would get tedious. Lastly, is it possible to have a list create cells? For example: I have information on row 4, this one will start on row 6. My next group of information starts on row 14. That leaves 7 rows for information. I don't want to leave a large gap at the top of the page, so I'd like to be able to create cells if the list I'm trying to create has more information on it. Seems plausible in my mind, but I'm still new to excel.
View 14 Replies
View Related
Jul 23, 2007
In column A I have values starting at row 4, ranging up to row 1004.
in coulumn Q (starting at row 3) I'd like a list of unique entries from column A
I know this line is my problem
If Range("A" & I) Range("Q4:Q30") Then
but i'm not sure how to compare against all values in a range
Sub FilterSymbol()
Dim I As Integer
Dim X As Integer
X = Range("O2")
I = 4
Do
If Range("A" & I) Range("Q4:Q30") Then
Range("Q" & I) = Range("A" & I)
I = I + 1
Else: I = I + 1
End If
Loop Until I >= X
End Sub
View 9 Replies
View Related
Jan 30, 2009
I have a list of sales events that ran at various venues, together with how many people attended and how much revenue was brought in by sales. This data is arranged by week. One venue will never have more than one event per week, but different venues may have sales events on the same week.
My table looks like:
In reality this list could be thousands of rows long.
“Event week” is the calendar week of the event. “Weeks open” shows for each event how many weeks that venue has been open (may or may not be useful!).
What I need to do is to be able to pick a number of weeks (preferably changeable by entering into a cell) and have a list produced of each venue that has run for at least that many weeks, and the sum of people and sales in those first X weeks. My idea of output, if the user input “2” as the number of weeks would therefore look something like:
Note that
1)only venues that have run at least 2 meetings are shown in the output
2)even if venue has run over 2 meetings, only people and sales figures from the first 2 are summed up and displayed.
In this case. Later on I need to produce a frequency chart/histogram grouping the results into categories, but I know how to do this as long as I can get to the step before – but wanted to mention it in case there are shortcuts.
Have been battling with this with pivots, database functions, array formulae etc. for a long time.
Attached is the spreadsheet with sample data. The red table is the part I am stuck on. The solution has to work in Excel 2003.
View 4 Replies
View Related
Jun 12, 2014
I have two lists of values in separate columns with condition in adjacent cells, all on the same sheet
List 1 consists of numbers from 1 to 12, column to the right is either blank or Free
List 2 consists of numbers from 13 to 24, column to the right is either blank of Free
List 1 starts in A2, B2 is either blank or Free
List 2 starts in D2, E2 is either blank or Free
In column G, from G2 i want it to list all values from List 1 and List 2 where their status is Free
View 14 Replies
View Related
Jan 24, 2012
I will copy a report into sheet 1, starting in the same place(A1), on a weekly basis. The headers are: Item, Quantity & Price
Week 1's report shows the following:
Windows 5 $1.00
Doors 6 $1.50
Chairs 7 $2.00
Week 2's report shows the following:
Windows 3 $1.00 (change in quantity)
Tables 7 $5.00 (new item)
Chairs 7 $2.50 (change in price)
I need to have a rolling, unique list on Sheet 2 that will do the following:
- add new line items
- keep old line items while checking to see if the quantity or price has changed.
Therefore, after week 2's report is pasted on sheet 1, Sheet 2 should look like this:
Windows 3 $1.00
Doors 6 $1.50
Chairs 7 $2.50
Tables 7 $5.00
Here's the most important part: There will be formulas in Column D in Sheet 2 that I need to stay with each item. generating the desired result on Sheet 2!
View 9 Replies
View Related
Apr 28, 2014
I have a spreadsheet of 12 columns (A to L), with a list of student names under each down to row 31. Each column represents an after-school club that the child can attend.
However, a child can sign up to multiple clubs, so their name can appear in several places across the spreadsheet.
What I would like to do is have a 13th column which is an overall list of students who have signed up to at least 1 club, i.e. their name appears at least once in columns A to L.
How do I achieve this so that only unique entries are listed and duplicates are removed in this 13th column?
View 7 Replies
View Related
Jul 8, 2014
I have 6 worksheets in my file. In sheets 1-5, column A2:A26 list people's names. Some people's names appears on more than one sheet. Not all cells are populated with a value.
ex.
SHEET1
COLUMNA
Bill
[Code]....
My attempt was... =INDEX('Week1:Week5-!$A$2:$A$26,MATCH(0,COUNTIF($A$1:A1,"Week1:Week5"!$A$2:$A$26),0))
where the sheets were Week1-Week5 and the values on each sheet was A2:A26. But I think there's an issue with Excel being able to 3D reference for these types of functions.
View 3 Replies
View Related
May 23, 2009
I've searched the forum and believe this thread to be the closest to what im looking for, but its doesnt completely apply: matrix to list conversion. I have an attachment to support my questions (see attached). I have a matrix of words (strings) that contain repeating and non-repeating contents. The matrix also has spaces which are of no value. Essentially, the VBA needs to ' analyze' this matrix and create a consolidated frequency list (as shown in the file).
The matrices are HUGE and therefore some of the clumsy VBA i am using is turning out to be a bit inefficient. The file also contains formulas and such that I cannot use AutoFilter nor can I use Insert or Delete rows...so the VBA shouldnt use those either.
View 6 Replies
View Related
Nov 28, 2007
I have a list of data which looks like this
Column B
Name
---------
Jones, Bob
Jones, Bob
Jones, Bob
Smith, Mike
Smith, Mike
Smith, Mike
Calai, Dave
Calai, Dave
Calai, Dave
Etc...
What I want to do is take the entire list and create a distinct list that I can use in a named range then use a validation list to have a drop down within a different tab.
View 9 Replies
View Related
Jun 20, 2008
I have a list of references and I need to pull from a database. The database contains more than one row with my reference, so I try doing something like this:
Sub ()
Range("B11").Select
Do Until IsEmpty(ActiveCell())
If ActiveCell = _
"7501" Or _
"7507" Or _
"7508" Or _
"7509" Or _
"7618" Then
But it does not work, besides I need to add more references. Could some one know a better way to do this?
View 3 Replies
View Related
Feb 11, 2014
I have some raw data of employment records on one workbook and from this i need to autopopulate there information into another workbook.
I need to split the records up by the different departments they work . I.e so what i am after if possible is -
If The department name in the raw data matches column A1 for example then it auto populates down in B2 all the names of people who work in that department .
View 9 Replies
View Related
Oct 3, 2007
I have a number of text columns, side by side in a worksheet, containing names. I wish to combine these columns into one new column, removing any duplicates, to create a single list of names. Is there a simple way to do this?
View 3 Replies
View Related
Feb 12, 2009
I have a column that looks something like (it is VERY long and has over 20 different names):
abe
abe
abe
abe
ben
ben
ben
cat
cat
john
john
john
john
tex
tex
I want to create another column (automatically) that lists each of of those once:
abe
ben
cat
john
tex
Any idea of how I can do this automatically?
View 12 Replies
View Related
Aug 6, 2014
So far I created code that creates a Distinct Unique item's list for one column. It works as it should but I want to modify the code to create a Distinct Unique item's list for two columns that are related to another i.e. a person's name to their license #.
Here is the code below that works for one column only:
[Code] ......
View 9 Replies
View Related
Jun 17, 2009
I have a list of project numbers that is over 7000 rows long [example attached].
Many numbers are repeated. This list comes out of a financial reporting system.
I need to extract a list of unique numbers in numerical order. I have two solutions working, one with SUMPRODUCT formulas and one with MACRO. Here's the MACRO solution. But it takes about 20 seconds to execute. I am just looking to cut down on execution time. I am using this macro a few times on different lists in the same program. Is there a better [faster] way to do this?
View 4 Replies
View Related
Jun 16, 2009
Any way in ms excel to create unlimited unique validation list. i am working on a small data where one colums data(Validation list) changes on the selection of previous column data filed. i am using indirect function with defined name range. but ms-excel is not accepting new names now and still i have 75 datagrops left to define and validate.
is there any formula or vba code to fix this problem.
View 9 Replies
View Related
Jun 3, 2007
I have a test sheet thus :
+ABCDEFG
1Bob11234
2Sally2
3Ann3
4Emily4
5Lexi3
6Bill2
7Josh1
8Jacob2
9Mary3
10Gary4
11
In D2:D11, I want a non-duplicate list of all the "1" names, i.e., Bob and Josh. In E2:E11, a list of all the "2" names (Sally, Bill & Jacob), and so on. Sorted would be nice, but not necessary. When new names and their numbers are added to A1:B200, they need to automatically show up in D2:G:201 as appropriate. I've looked over VLOOKUP, INDEX, MATCH, etc., but all seem to simply return the first and not every match. Maybe I'm just missing it.
Is this possible without VBA? Not that I have any objection to it, but delving into and learning it is a little outside the available time I have now. If it takes VBA I'll address it when I can free up some time.
View 5 Replies
View Related
Aug 27, 2007
In Excel I recorded a macro by carrying out some operations and then copied the code into VBA code window to the click event of a button expecting the code would operate well but in vain. What is wrong with my operations? By cliking command button placed on a userform I want to copy the date of one column to another and the data thus copied into another column should contain only unique value.
View 4 Replies
View Related
Feb 27, 2008
I want to end up with a list of unique items (nothing repeated) from a variable length list starting in cell B5. That unique list is then placed in cell D3.
I am using the code below (found on Ozgrid) which almost works. But it seems to be dependent on what’s in column A (which I wish to ignore) for it to work.
How can I modify the code so that the results are based on column B only?
Dim Rng As Range
Dim fRng As Range
Dim lRow As Long
Dim Dest As Range
lRow = Range("B" & Rows.Count).End(xlUp).Row
Set Rng = Range("A5:B" & lRow)
Set Dest = [D3]
With Rng
. AutoFilter Field:=1, Criteria1:="1*"
Set fRng = .Offset(1, 1).Resize(.Rows.Count - 1, 1).SpecialCells(xlCellTypeVisible)
With fRng
.AdvancedFilter Action:=xlFilterCopy, CopyToRange:=Dest, Unique:=True
End With
End With
View 7 Replies
View Related
Mar 23, 2008
I have a table and say I would like to create a unique list from column2 and store the list in a spearate sheet. Give this unique list a name.
Use this unique list in a FOR EACH loop and apply autofilter to two tables on two different sheets.
(one table is from which the unique list was created and other in a different sheet)
View 4 Replies
View Related
Jul 27, 2013
[URL] ......
In that file, you can see there is a list of somewhat similar data across 5 columns. Some of the entries are duplicates, some are different by only one character. What I want to be able to do is generate a list of all the unique rows of data, taking into account the data from ALL 5 columns. The list can be on another sheet or simply just further down on the same sheet, that doesn't matter too much.
I could do it if it were just one column of data, but struggling trying to do it with several columns.
View 7 Replies
View Related
Feb 4, 2012
I need a Macro to create a unique, rolling data list. On Sheet 1, a report is pasted(from outside source) in cell A3(Rows 1 & 2 are headers) on a weekly basis. It is always the same amount of columns wide(138). The number of rows will always vary but will never be more than 500.
Here’s what I need for Sheet 2:
-Column A should be a copy from Column A on Sheet 1 (data is ITEMS)
-Column B should be a copy from Column BH on Sheet 1 (data is QUANTITY of items)
-Column C should be a copy from Column BI on Sheet 1 (data is PRICE of items)
Here’s the challenge (when the new report is pasted on Sheet 1):
-Sheet 1. Find new ITEMS not on Sheet 2 and paste them at the end of the report on Sheet 2 along with their QUANTITY and PRICE
-Sheet 1. Find any ITEMS already on Sheet 2, then update new QUANTITY and PRICE from Sheet 1 onto Sheet 2
-Sheet 2. Leave ITEMS alone that are now missing from the new report on Sheet 1
View 7 Replies
View Related
Jan 13, 2008
I am getting a run time error 1004 during a copy-paste of a named range. I've read other posts and the help file and know it's related to defining an object, but I'm not clear on exactly what hasn't been defined.
Private Sub Worksheet_Activate()
Dim lCell As Range
Set lCell = Worksheets("Sheet1").Range("C65536").End(xlUp).Offset(1, 0) ' find first blank cell in the column
With Worksheets("Sheet1").Range("AllDates") 'filter duplicate dates
. AdvancedFilter Action:=xlFilterCopy, CopyToRange:=Range( _
"E7"), Unique:=True
End With
Worksheets("Sheet1").Range("Dates_Filtered").Copy Destination:=Worksheets("Sheet1").Range("lCell") ' fails on this line
Range("Dates_Filtered").Clear
End Sub
View 3 Replies
View Related
Mar 17, 2012
I have a Column, say column A, setup with a lot of repeated data. Now what I want is to pick only a single value from each set of data and put them into a separate column. for example:
Col A
1
2
3
2
4
1
5
4
1s
a2
1s
a2
a2
6
What I want the excel to do is to pick from the above data only a unique value and put them into a separate col, like this:
Col C
1
2
3
4
5
1s
a2
6
View 5 Replies
View Related
May 28, 2014
The function below should return the value in a cell IF the string in the cell two cells to the left of it is "Nemo" Omitting the part highlighted in blue, my function returns a list of unique values...but when it's included, nothing is returned at all. Perhaps, there is an error in the syntax that I'm overlooking?
Function listUnique(rng As Range) As Variant
Dim row As Range
Dim elements() As String
[Code]....
View 2 Replies
View Related
Apr 23, 2008
this code "Creates a New Workbook" for each item listed in an excel table, then, copy all unique values in their respective Workbook and save it. So, the problem is this. instead of creating a "New Workbook", i want to open a previously created Workbook (template) and do the procedures listed above. Is this posible?
Sub Copy_To_Workbooks()
Dim CalcMode As Long
Dim ws1 As Worksheet
Dim ws2 As Worksheet
Dim WSNew As Worksheet
Dim rng As Range
Dim cell As Range
Dim Lrow As Long
Dim foldername As String
Dim MyPath As String
Dim FieldNum As Integer
Dim FileExtStr As String
Dim FileFormatNum As Long
Set ws1 = Sheets("Sheet1") '<<< Change
If Val(Application.Version) < 12 Then
'You use Excel 97-2003
FileExtStr = ".xls": FileFormatNum = -4143
Else
If ws1.Parent.FileFormat = 56 Then
FileExtStr = ".xls": FileFormatNum = 56
Else
FileExtStr = ".xlsx": FileFormatNum = 51
End If
End If..............
View 6 Replies
View Related
Sep 15, 2013
I have some data with recurring key values and differing values in the second column, I need to produce a unique list of key values with the second values concatenated together.(See below)
The data can be 10 rows to 5000 and I can have anything from 5 to 150 sheets (Separate data sets), a macro would go a long way to keeping me sane.
Sample data Required Output
A | B Z
1| 10 | a 10,a,b,c
2| 10 | b 11,a
3| 10 | c 12,a,b
4| 11 | a
5| 12 | a
6| 12 | b
My system is Windows 8 Excel 2010.
View 7 Replies
View Related
Aug 14, 2014
1. Using a formula, I am trying to to obtain a list of unique values (string) (caveat: see #2) from the range E2:E10000 (arbitrarily chose 10000 - the row number is variable)(see #3).
I currently have a formula that seems to work for this purpose but I don't know how to add the condition in #2 (below)
2. To include all unique string values except those starting with the letters "IC"
3. Is there a way to make this formula so that it can only seek values up to the last row, and not go to the 10000th row if not necessary? The E column has no empty cells until after the last row that contains data.
Here is the formula I currently use which serves #1 (above):
[Code] .....
Any way to improve/simplfy this formula for the purpose describbed in #1? How can I add the condition in #2? Can you see a way to include #3? The most important issue here is #2.
Example of desired results:
Column A | Column B
AA | AA
DD | CC
AA | DD
CC |
DD |
DD |
IC |
IC |
View 14 Replies
View Related
Jan 21, 2014
Excel 2010. There is a limit to the usability of the
=INDEX($A$1:$A$1000,MATCH(0,COUNTIF($A$1:$A$1000,"<"&$A$1:$A$1000),0))
method. It seems like the limitation is in the Countif function going over 1000 (or some other size limit)
I have a list of ~1500 rows, of that there are approximately 55 unique items. Doing the unique array works correctly up until item ~40, upon which it fails by returning the 1st item only (for the rest).
Trying to debug, and pulling out the Match section, it functions up until 976 (that is
MATCH(0,COUNTIF($N$1:$N40,$C$3:$C$1500),0)
returns 976) anything after returns just 1 (1st item).
It seems to be a limitation on the text string size that COUNTIF can handle.
View 7 Replies
View Related
