Trying to take data from a UserForm and copy to specific cells
It's going OK with certain fields (eg, User name) but hit a snag with the date field. The cell is formatted as *15/03/2005 in format cells, but I get odd results when a date is entered.
Initially was getting an issue with leading zeroes. If I enter 1/1/2009, this value goes into the cell as 1/1/2009, not the 01/01/2009 that I expect.....
I was using
Range("C5") = DateBox
I got round the lack of leading zeroes by pasting the actual value into the cell
Range("C5") = DateBox.Value
However, now found that I'm getting the wrong date format! If I use the first method to copy data, I'm getting UK formatting (ie enter 12/2/2008 and I get 12/2/2008), but if I use the second method, I get 02/12/2008!
I have created a user form with a date field which fills a spreadsheet cell. The spreadsheet cell is formatted to dd/mm/yy but the user form will always enter as mm/dd/yy. Does anyone know how to edit the VBA form to use the dd/mm/yy format.
I've currently got an inputbox (Userform) where the user gets to enter the date. My problem is, when the dates entered (example todays date... 17/07/06) it comes out in an error because it assumes i want the US Date format. What i would like is UK format. I've done everything i can do in excel, i assume its a problem with VBA, which i'm still thick at...
Sub proInput() Sheets(" Pivot reports"). Range("D7").Value = InputBox("Please Enter Date!")
I have a Userform and 2 text boxes that require users to enter a date. I really need the users to be forced to enter the date in "mm/dd/yy" format or they cannot get passed that text box or at least an error comes up.
I've attached a picture of how my userform is set up - all of the code is working fine and does very dandy, even if I do say so myself, but as you can see when I load data into the listbox, the date on the left hand side becomes M/DD/YYYY whereas I want it as DD/MM/YYYY.
All of the columns except Due Dateconsist of text/numbers and these load fine however even if I change the format of the Due Date data within the worksheet before loading it in it still loads incorrectly. Is there any way to format the date to how I want it within the ListBox?
I have a calendar userform that enters a date into a userform textbox in the format mm/dd/yy.
I am in the UK, so default date format is dd/mm/yyyy but i need it as above - mm/dd/yy
So, when I get a MsgBox to repeat Textbox1.Value (the date from the calendar object, formatted mm/dd/yy) and repeat it in format dddd mmmm dd yyyy, it reads the value not as I want it, mm/dd/yy, but as the usual dd/mm/yyyy - so instead of reading 08/01/12 as Wednesday August 01 2012 it is giving me Sunday January 08 2012 - even though in the cells on the worksheet that are populated from the textbox, the date reads correctly, so 08/01/2012 is indeed 1st August 2012 not January 8th 2012...
So it's the MsgBOx function reading the textbox in the userform wrong, and formatting makes no difference...
Can I fix this without changing my regional settings? Is there a way to set the region in vba then unset when leaving the program? I don't want to have to change regional, and anyway, the program will be used by others who won't know / want to do that.
I have a userfrom with 2 textboxes used for entering dates. would like to either force the user to enter the date as xx/xx/xxxx or have a calendar feature where they can select a date. I checked my 'additional controls' in my toolbox but do not see a calendar option.
I having problem to determine the format value of dates that needs to be inserted in a Userform.
I have the following format in my userform for my Textbox:
[Code] ......
When I select the calendar in my userform that is set as follows:
[Code] .......
And select the first day of the month, it will always add the format as 05/01/2014 but if I select today’s date as example it will add it in the right format: 2014/05/26
I have included a sample to demonstrate the function of the calendar as I have declared it public as d in a module, therefore making the population of my userforms textbox easier to add information on dates.
Calendar.xlsm
If you add 2014/05/01 - 2014/05/26 and 2014/05/06 you will see where the system is having problem with the month and dates I guess the system confuses the two?
I have a table of data (total 142 rows). Column contains dates, in the format dd-mmm-yyyy.
I tried to filter using DATE FILTERS->EQUALS and in the custom filter window, I chose EQUALS then picked a date from the date picker icon. The date I picked was 5/4/2009 (this is May 4, 2009, formatted automaticall by excel as m/d/yyyy).
When I clicked OK, nothing showed up despite the fact that there are 6 occurences of May 4, 2009 (formatted as dd-mmm-yyyy in the data table)
So my questions are:
1. Is this due to the formatting?
2. Is there a way to change the date format supplied by the date picker?
One of the reports I run provides me information on lengths of time. Such a field displays as |0:09:16| indicating 9 minutes and 16 seconds. However, when the report generates the excel spreadsheet it saves these cells in date/time format ([h]:mm:ss). If I were to convert this field to the number format (so I can manipulate and graph it) it displays as such |0.00643460648148148| Ideally I would be able to have the data in the field stored as |556| (556 seconds, or 9 minutes 16 seconds). I have thousands of fields that I need to manipulate where the data is stored in this format and I can not figure out how to fix it.
I have an Excel 2010 spreadsheet where the default number format keeps switching to the date format. I keep switching it back and it'll stay as a number format for a time, but then it'll switch back. This is also the case for any new worksheets in that one spreadsheet.
This only happens with this one file - everything else behaves according to my regional settings or to how the file had been previously formatted.
I have two columns where there are dates (e.g. 11/05/2009) in a date format; I would like to change the format to `general`; but without losing the original values, i.e. I still want to see 11/05/2009, but just in `general`format. Is it possible to create a macro that will do that? I want these values to stay in the same place, i.e. if it is in cell K10, I still want to have it there - just in other format.
I have a some dates in a format which are not being converted into the normal date format. So i made this formula to convert it into the normal date format:
Formula is working fine except on this type of date "9/9/2013"..i also tried an OR formula with mid but didnt get the desired result.These are the type of dates:
I have an excel sheet full of dates in text format and want to convert them into regular format. For instance, one of the dates listed is in text as "60801". I'd like it to show in regular date format of mm/dd/yyyy, so that 60801 becomes 8/1/2006.
I have a problem where i am just trying to do a simple copy of dates from one spreadsheet to another
18/03/2008 00:00 however when the its copied to the other spreassheet is changes to the US date formate 3/18/2008 0:00 I need to keep the format as date as the date needs to be the current day. How do i get this to remain UK
I have a long list of dates that are fomatted as 3-12-13 that I want to format under custom date as d-mmm-yy : 12-Mar-13. I tried to do this but it does not change. I tried to change it to a number and that didn't work either.
In D2 I have: =B2 In D3 I have manually input: (space)3-08
As you can see the CONCATENATE puts the "39569" date in A2 But the second line puts the text date as I prefer. What I would like to do is put in a formula or macro in D2 and down that will change the "Mar-08" to "3-08" so it CONCATENATEs correctly to column A. Simply: I'm trying to avoid manually inputing the text version "3-08" (or whatever M-Y) into D2 down a hundred or so rows!
I have a column in excel which gets populated in the format "2/1/1980" when copied from a different source. I want a macro to run on this column and convert this in the below format. Required format: '02-01-80 (note the ' symbol before 02 which will keep it as text)
I need this macro to run on two columns and replace them with the required format. I can do a find and replace either in the sheet or through hard coding the VBA, but as the date format keeps growing, I would need to do this via code and hence requesting the same.
I have txtboxes in which I write date in format dd/mm/yyyy but if I want to put date in cell correctly from this textbox in need to declare event on exit -change format to mm/dd/yyyy and then it puts date in desired format which is dd/mm/yyyy and my regional settings are English(uk)
Is there a way to put any date format in textbox and in cell there will always be format dd/mm/yyyy or at least if date is entered in format dd/mm/yyyy that also in cell the same format is putted
I have a workbook that I'm using to tracking staffing patterns within a mental health agency. When the workbook opens the user is asked to pick a date range and an office location. I've placed code into the userform that pre-fills the "start date" with today's date and the "end date" 7 days from today's date. I would like the user to be able to enter a unique date range should they wish but I have yet to figure out the coding to accomplish my goal.
I have userform with date pickers and have text boxes overlaid on these, when I select todays date from the date picker it does not display the current date in the text box (I have 8 date pickers on the userform). If I select another date then reselect the current date it works. It has occasionally worked but why.
Below is the code for populating the text box from the Date Picker.
Private Sub DTPicker1_Change() TextBox1.Value = DTPicker1.Value End Sub
The initialize userform code uses the following to format and set the textbox
I have a spread sheet with a date colume that reads: 2012-06-27-19 I need to have this read like 06/27/2012 but nothing I do is working I have tried to go to the formatting process and backing the hr:mm out and that doesn't work. I really don't want to go line by line to manually correct this issue.. HENCE ... over 2000 lines
Second question: If I have a column that reads 02/15/2012 and another column that reads 3/27/2012 how to a format a 3rd column to make it read total number of days between 1st date and 2nd date?