I have a Userform and 2 text boxes that require users to enter a date. I really need the users to be forced to enter the date in "mm/dd/yy" format or they cannot get passed that text box or at least an error comes up.
I have a userform that one textbox takes it's value from a cell in sheet3.(k2). The format of this cell is currency. How the textbox takes the same format as the cell?
In the same userform i have a series(prcase1,prcase2..) of textboxes that i want to have currency format as the user type numbers on these.
In the process of entering data the textBoxes get different .BackColor settings.
When the reset command button is hit the boxes stay the same colors, so I could reset them with a single command rather than 30+ lines of formatting code.
I have created a user form with a date field which fills a spreadsheet cell. The spreadsheet cell is formatted to dd/mm/yy but the user form will always enter as mm/dd/yy. Does anyone know how to edit the VBA form to use the dd/mm/yy format.
Trying to take data from a UserForm and copy to specific cells
It's going OK with certain fields (eg, User name) but hit a snag with the date field. The cell is formatted as *15/03/2005 in format cells, but I get odd results when a date is entered.
Initially was getting an issue with leading zeroes. If I enter 1/1/2009, this value goes into the cell as 1/1/2009, not the 01/01/2009 that I expect.....
I was using
Range("C5") = DateBox
I got round the lack of leading zeroes by pasting the actual value into the cell
Range("C5") = DateBox.Value
However, now found that I'm getting the wrong date format! If I use the first method to copy data, I'm getting UK formatting (ie enter 12/2/2008 and I get 12/2/2008), but if I use the second method, I get 02/12/2008!
I've currently got an inputbox (Userform) where the user gets to enter the date. My problem is, when the dates entered (example todays date... 17/07/06) it comes out in an error because it assumes i want the US Date format. What i would like is UK format. I've done everything i can do in excel, i assume its a problem with VBA, which i'm still thick at...
Sub proInput() Sheets(" Pivot reports"). Range("D7").Value = InputBox("Please Enter Date!")
I've attached a picture of how my userform is set up - all of the code is working fine and does very dandy, even if I do say so myself, but as you can see when I load data into the listbox, the date on the left hand side becomes M/DD/YYYY whereas I want it as DD/MM/YYYY.
All of the columns except Due Dateconsist of text/numbers and these load fine however even if I change the format of the Due Date data within the worksheet before loading it in it still loads incorrectly. Is there any way to format the date to how I want it within the ListBox?
I have a calendar userform that enters a date into a userform textbox in the format mm/dd/yy.
I am in the UK, so default date format is dd/mm/yyyy but i need it as above - mm/dd/yy
So, when I get a MsgBox to repeat Textbox1.Value (the date from the calendar object, formatted mm/dd/yy) and repeat it in format dddd mmmm dd yyyy, it reads the value not as I want it, mm/dd/yy, but as the usual dd/mm/yyyy - so instead of reading 08/01/12 as Wednesday August 01 2012 it is giving me Sunday January 08 2012 - even though in the cells on the worksheet that are populated from the textbox, the date reads correctly, so 08/01/2012 is indeed 1st August 2012 not January 8th 2012...
So it's the MsgBOx function reading the textbox in the userform wrong, and formatting makes no difference...
Can I fix this without changing my regional settings? Is there a way to set the region in vba then unset when leaving the program? I don't want to have to change regional, and anyway, the program will be used by others who won't know / want to do that.
I have a userfrom with 2 textboxes used for entering dates. would like to either force the user to enter the date as xx/xx/xxxx or have a calendar feature where they can select a date. I checked my 'additional controls' in my toolbox but do not see a calendar option.
I having problem to determine the format value of dates that needs to be inserted in a Userform.
I have the following format in my userform for my Textbox:
[Code] ......
When I select the calendar in my userform that is set as follows:
[Code] .......
And select the first day of the month, it will always add the format as 05/01/2014 but if I select today’s date as example it will add it in the right format: 2014/05/26
I have included a sample to demonstrate the function of the calendar as I have declared it public as d in a module, therefore making the population of my userforms textbox easier to add information on dates.
Calendar.xlsm
If you add 2014/05/01 - 2014/05/26 and 2014/05/06 you will see where the system is having problem with the month and dates I guess the system confuses the two?
I've got a workbook (attached) with a UserForm that summarizes transactions entered in columns A and B based on the entry (color) in column A. If you click on the Button (Summary (Show/Hide)) it brings up the UserForm.
A couple of issues I've struggled with: 1. I'd like the UserForm to open when the workbook opens. 2. I'd like the UserForm to update as entries are made in Columns A and B when the user tabs out of column B 3. I'd like the UserForm to always stay open; the user cannot close it.
I've got the same data in cells G26:M34 but these cells don't "float" as the page moves down. This is the reason I've gone to a UserForm to accumulate the data.
I was just wondering if there is a more efficient method. I have a UserForm that requies textboxes to be filled. I have a commandbutton1 on the form called "next" which is only enabled after all the fields have been filled. If any field is blank, I want the commandbutton "next" to be disabled. I have many UserForms so I wanted to see if there is another way than my own primitive method - I have a code for the change event of each textbox
Private Sub TextBox1_Change() If Me.TextBox1 = "" Or Me.TextBox2 = "" Then Me.CommandButton1.Enabled = False Else Me.CommandButton1.Enabled = True End If End Sub
Private Sub TextBox2_Change() If Me.TextBox2 = "" Or Me.TextBox1 = "" Then Me.CommandButton1.Enabled = False Else Me.CommandButton1.Enabled = True End If End Sub
Private Sub UserForm_activate() Me.CommandButton1.Enabled = False End Sub
I am working on creating a userform to make sure that information gets entered correctly into a spreadsheet. This is a rather large user form with numerous text and list boxes on a number of tabs. I also have a toggle box at the top of the form that helps choose what sort of data I will be needing. When the toggle box is selected I only need about half as much information and do not want users to be able to enter the rest. I am looking to enter code that changes the enabled property of the unneeded boxes to false when the toggle button is selected and back to true when it is clicked off. Unfortunately, this involves about 50 text/list boxes. Things are going to get very messy if I need to write out a seperate line for each of these items.
My question is this. I know there is a way to group these boxes and change the properties of the group as a whole in the editor, but is there a way to refer to such groups and their properties in my code.
Here is my case: I have made a userform called "frmvakanties" this form contains a certain amount of textfields in wich the user should be able to put dates (d-mm-yyyy) the userform also contains a OK button, wich is called cmdOK. in the the Private sub cmdOK_click it says:
Dim txtNwJrvan as date unload me So far no problem. For this question i just take one of the textboxes, wich is called 'txtnwjrvan'
Now have my vb module. I wrote there: 'frmvakanties.Show'
When i run this program, I get the userform with the unfilled textboxes, fill them with a date and press OK.
this is where my problem is: after frmvakanties.show i've typed msgbox (frmvakanties.txtNwJrvan)
I do get a msgbox, but it is empty!
I just made this msgbox to check what date it returns, since i need the entered date for further use in my script.
I have a bunch of TextBoxes on a UserForm, and I would like to create a Sub to clear all of them. Something like that:
For I = 1 To 10 NameBox = "TextBox_Area" & I For Each objControl In UserForm1.MultiPage_1.Pages(1).Controls If TypeOf objControl Is MSForms.TextBox And objControl. Name = NameBox Then objControl.Text = "" End If Next objControl Next I
But of course there is no Text method for Controls. And I cannot loop directly through TextBoxes instead of Controls. So what can I do ?
I've got a UserForm that contains 31 TextBoxes ( Named Text1, Text2, Text3 ... Text31). I want to format the Textboxes depending on the values stored in a Sheet - these values are stored in the first 31 rows of the Sheet and each row coresponds to only one TextBox. I need to know whether there is a way for the code to recognize that the values for the first row influance the format of the first TextBox (TextBox1), the second row influences TextBox2 and so on and so forth. The code should then set a range and assign each of the 31 rows to each of the 31 Buttons. Therefore the question - can a part of the name of a TextBox become a variable and be mached with the coresponding Row Number?
I am looking for codes to clear the textbox fields while the existing codes transfer the information to the execel page. I have programmed it to transfer the data to the sheet but I can't write the codes to clear the textboxes for the next entry.
I want to program the same command button to transfer the data to the sheet and clear the textboxes simultaneously.
I have a userform that has 3 sections. In each section are a number of text boxes which, following input of a value in the first text box in the section (master box), self populate with data from a spreadsheet.
This works apart from when I change the value of one of the first text boxes. Is there a simple bit of code that if on the change of the value in the master box will reset the 'dependent' text boxes to empty?
I am trying to get two text boxes on a userform to populate a third box on the form when the user inputs the data in both of the first two boxes. I am pretty sure i need to use a change event, but I am not sure how or what triggers them. so I have:
[Code] ....
but they don't work when I put data in VSShortPrem and VSLongPrem textboxes. Do I need to call them to the userform module?
When the user choose a customer from a combo box then i need to get some statistical results in the text boxes, such as last amount of credit-charge, last date, and amount that he has to pay us until now.
When user adds a new amount in the grey textbox then this has to be added in the previous amount.
I have the expected results of my example in my sample sheet.
I have seen a lot on how to do this with a listbox, but i need to do it with textboxes. I have 30 textboxes in order and would like to have two buttons (1 For move up and 1 for move down) to move the value from the current textbox in focus (active) and swap it up or down.
I am trying to create some VBA code, which will average the contents of up to twelve textboxes on a Userform, and then put the average in the next one.
I have sorted this, HOWEVER.. I have a couple of problems.
The average isn’t correct Some of the textboxes may be blank, and therefore should not be included in the calculation
Here is my code
Private Sub CommandButton3_Click() Dim results(12) As Double Dim ave As Double results(1) = CDbl(TextBox5.Value) results(2) = CDbl(TextBox6.Value) results(3) = CDbl(TextBox7.Value) results(4) = CDbl(TextBox8.Value) results(5) = CDbl(TextBox9.Value) results(6) = CDbl(TextBox10.Value) results(7) = CDbl(TextBox11.Value) results(8) = CDbl(TextBox12.Value) results(9) = CDbl(TextBox13.Value) results(10) = CDbl(TextBox14Value) results(11) = CDbl(TextBox15.Value) results(12) = CDbl(TextBox16Value)