trying to create a 'countdown' to time of macro completion (based on a static performance time of 1:48). What I want to do is compare a time (ProgTime) set as static at the beginning of the code with 'TIME' and return the difference in seconds. I use the following code:
[Code] ....
When I step through, I can see that ProgTime and Time have different values and yet 'Test' always returns a value of '0'. I tried using 'Now' instead of 'Time' and the same result ('0') occurs. I have experimented with declaring 'Test' as an integer, a long and a date and the result is always the same! I've tried using 'Seconds() around the datediff to ensure an answer in seconds, I've tried 'format' around it with multiple decimal places to make sure I'm not missing a tiny value: Nothing seems to do the trick!
I'm struggling with the VBA DATEDIFF function. I have a person's DOB and am attempting to determine their age by comparing to a different date. It seems like their age only changes when I change the year, rather than choose a date within the year past their birth date... Here is my code:
Sub Test_click() DOB1 = #7/19/1930# 'DOB date2 = #7/18/2012# Date3 = #7/21/2012# age1 = DateDiff("yyyy", DOB1, date2) 'age should be 81 (but is 82) age2 = DateDiff("yyyy", DOB1, date2) 'age is 82 (correct) End Sub
I have a range of data and need to summarize some of the data. In the table below is an example of the data. I would like to have a single formula where I can count the number of rows where the end date - start date is < 14 days. I would prefer not to add an additional column for the datediff value. Is there a way to do this with either arrays or named ranges?
Name Start End Other data Verizon 1/10/2010 1/25/2010 AT&T 3/2/2010 4/14/2010
I have an IF Function that if C4 says HUD then it returns the infor in a range of cells on the HUD worksheet, which is a separate worksheet from where this formula is {=IF(C4="HUD",HUD!A1:C100,"")}. I have also used =IF($C$4="HUD",HUD!A1,"").
But now, on the cells that it is returning, it puts 0 in cells that are blank on the other worksheet. What can I add to this formula to eliminate that?
Both of these functions are working otherwise. They are just returning 0 in cells that were blank.
I'm trying to figure out an Internal Rate of Return for a spreadsheet. The answer is supposed to be: 29.42% however I'm getting 25.94%. Does anyone know what I'm doing wrong in my IRR function on the Profitability worksheet? I'm currently using Excel 2007 by the way.
I am new to VBA programming in Excel (currently 2003) so hopefully this isn't a "dumb" question.
I would like to re-arrange a group of data from a table of several rows and columns to a single column where the data from the first row is translated to a column then the second row is appended to the end of that data ....
I thought a user defined formula would be a good place to start but am having problems getting the address of the cell that the function resides in to use to calculate the offset from a fixed cell (to be entered into the function as a argument). In other words, how do I get the address of the call that a UDF is entered in into the UDF? activecell.address is returning the cell that was last clicked not the cell were the UDF resides.
Secondly is there a better way to achive the results that I am looking for other than through a function? The size of the table will vary from worksheet to worksheet. I would also like to add an argumnet that lets me exclude cells with certain content from the resultant list.
I have data concerning documents people have to write, which is updated weekly. Is there a way of looking up a name and then returning all the documents that they have to write. I have tried a vlookup, but this only returns the first entry and not the lot. Also i would prefer the document data for each person to be returned in to one cell.
I have 3 columns of numerical data. In my fourth column, I would like to return the minimum value from the 3 previous columns (=min). However, instead of returning the lowest number, I would like it to return the column title (=text) of the lowest number. I haven't been able to locate a function that does this.
I am working on a spreadsheet that deals with times such as a work schedule, how every the schedule cells are in a time format, and my if function will only return "check"(which is false). my code works if it remove the time formatted cells but i want to keep the document in its orginal format.
My problem is that I am getting the N/A error in cell M3 if L3 is empty. I would like the forumla to 'ignore' cell L3 if it is empty. I do not want a zero put in there. I have looked up information on ISBLANK function but the more I read the more confused I am getting
I have two columns A & B. If I enter "Short" into Col A, I want "Long" to automatically appear in Col B, and vice versa. This is the code I have created so far. =IF(C4="Short","Long",IF(C4="Long","Short",IF(C4="",""))). This works but when I paste the formula into all cells in Col B, I get "FALSE" showing up in every cell. How can I stop the "FALSE" from populating every cell in Col B while Col A remains blank?
What's odd is that if I create the formulas above independent of the specific formula data (O5, P5, and Q5) and just type in numbers, those formulas do exactly what they should. Can I not compare data returned though formula calculations?
A client has a registration workbook for each student which contains 3 types of worksheets, A) Transcript B) Registration and C) Grade sheets. Each file has only 1 Transcript sheet and 1 to many pairs of Registration and Grade sheets.
I have a GPA user defined function which obviously can only be used on a Grade sheet. I would like to return an Error if the user trys to use the udf on a non Grade sheet.
Currently I am just returning 1/0 but the smart tag returns #Name. Can I control the text displayed somehow?
The problem with the code above is the last If, in which the function "rekursivloop" calls itself. I don't know if this type of formulation is correct, but for the cases the If condition is TRUE (ie ut1 <> ""), the function does not return any answer. Does anyone see an error in the logic or have some example for how to write similar recursive loops?
I am currently using the Match and index functions to search for specific criteria and return specific data based on that criteria. The problem is the formula is returning the first value at the beginning of the month rather then the end of the month value that I am asking for. I have my criteria set to zero so it should be a perfect match. with the live worksheet I have several tabs for different years. I want to take the end of month balance on each of those year tabs for each month in each fiscal year and add them together. My formula only has the one month because I am unable to get it to work much less adding in all of the years information. I have the employees choosing EOM for the last transaction posted during that month and that calculates the month number in the field next to it. I was thinking I could use the match to look for a specific month in that column and return the balance adjacent to it at that point.
In an excel sheet, I am using a macro to filter. Macro code is as follows. When I run this macro, it returns 4 rows matching the criteria from 560 rows in the excel sheet.
I want to use the same criteria in the vb.net code, to do same thru vb.net. But, when I run the same code in vb.net, it just returns only 1 row (1st row only).
I have attached a sample spreadsheet which describes my problem.
In C2 and C3 under the first business coalitions column, I have written in text what I would like to be displayed automatically with a formula. The trouble is that, as you can see, Abbott Laboratories is a member of 3 business coalitions. Therefore, a simple vlookup doesn't work because that would only return 1 result.
I am trying to use a match function in VBA to return a value when a number of values in a row match a certain criteria (I have tried the Find approach on the Ozgrid help pages but it is not what I am after). My problem using a match function of course is that when there is no match the code returns a type mismatch error. I have tried to circumvent the error problem using an "On error resume next" but this then delivers a match for all rows. Anyone have any thoughts about how I can get around this problem?
Sub DataSum() Dim strData As String Dim i As Integer i = 0 Sheets("Sheet1").Activate Range("B4", Range("B4").End(xlDown).Offset(0, 0)).Select For Each cell In Selection If cell.Value = 0 Then i = i + 1 Else strData = Sheets("Sheet1").Range("$B$4").Offset(i, 0)...........................
TotHCInv.Value = WorksheetFunction. Sum(KRInv, PBLInv, CRInv, PVInv) If i >= 34 Then CPSCtphRMA.Value = WorksheetFunction.Average("G" & (i - 30) & ":G" & i)
The first line runs properly, but the second line bugs out with the error message "Unable to get the Average property of the WorksheetFunction class". I can simply do the math, but I thought that using the worksheet function would be easier than summing and dividing. I'm curious, though, as to why I can't seem to use the Average function.
I am trying to use the following code to compare the password that was entered, to the one that is stored in the worksheet to make the user aware that the password they have entered is incorrect
I am wanting to populate the "Most Recent" column by selecting the last value in each row between B to F so that I get the following result:
A B C D E F
1 Most Recent 1st 2nd 3rd 4th 5th
[Code] ........
I am also wanting the result under Column A to indicate by cell colour red if the value is less than the previous value and by cell colour green if the value is equal to or greater than the previous value.
For example; Cell A2 should be highlighted green because the last value which is D2 is greater than the previous value in C2. While Cell A4 should be highlighted red because the last value which is C4 is less than the previous value in B4.
I do have another question actually. In the Total Sales worksheet, I have a a cell in S2 that I wish to show the max value from the "total sales" colum and then show the first and last name related to that particular row where the max value was. so, I only have =MAX(O2:O112), but I want to show the Name associated with the max and not just the $ amount.
So in S2 I want ---> John Doe and not $512.50, but I can only think of =IF(MAX(O2:O112), $B2+$B3, 0) becase I want both the first and last name. I used this formula with only $B2, but it just returned the first name in the B2 field
i have this formula in cell e28 =IF(B28<>"",LOOKUP(B28,STOCK!A1:A500,STOCK!B1:B500),"") and when its empty it returns a blank cell
but in cell e29 i have exactly the same formula =IF(B29<>"",LOOKUP(B29,STOCK!A1:A500,STOCK!B1:B500),"") but i returns #n/a
why is this and how do i stop it i want the cell to be empty unless there is a code entered in b29 in which case it will look up the relevant info for me
I am trying to create a formula that will search a row left to right for the first instance of zero and return the corresponding column label. I had this working for a smaller table using a couple of hidden columns with nested ifs however the new data set is approximately 25 columns wide and it will get very messy using the same approach. See attached sample with desired results.
