Index And Match Function Returning Same Values
Dec 15, 2009In cell G51 of sheet "My Overview", if two people have the same scores it pulls through one person twice in F51 and F52, how can i overcome this?
View 4 Replies
ADVERTISEMENT
Match And Index Function Not Returning The Correct Field?
Sep 29, 2012I am currently using the Match and index functions to search for specific criteria and return specific data based on that criteria. The problem is the formula is returning the first value at the beginning of the month rather then the end of the month value that I am asking for. I have my criteria set to zero so it should be a perfect match. with the live worksheet I have several tabs for different years. I want to take the end of month balance on each of those year tabs for each month in each fiscal year and add them together. My formula only has the one month because I am unable to get it to work much less adding in all of the years information. I have the employees choosing EOM for the last transaction posted during that month and that calculates the month number in the field next to it. I was thinking I could use the match to look for a specific month in that column and return the balance adjacent to it at that point.
View 7 Replies View RelatedReturning Second / Third Etc Values Using VLOOKUP / INDEX / MATCH
Mar 1, 2014making a forumla that will return the second, third ewtc values using VLOOKUP or INDEX/MATCH. Attached is a dummy file almost identical to the one I'm working in. In the first sheet there's a dependent drop-down list with the values Sub1, Sub2 and Sub3. This corresponds with data in sheet two listed next to these names. The problem is when I try to populate the table below using VLOOKUP etc it just repeats the first row over and over rather than defaulting to the second and third row results
View 6 Replies View RelatedUsing Index / Match Function For Two Column Match Values
Aug 28, 2012Basically where the columns say 2011 or 2012 AND 1, 2, 3. I want to be able to have it index the number below based on the GL number on the left and both the year and period on the top. I think that you can do with using the sumproduct function with the binary, but the computer is a little dated and it takes a while to run those calculations.
2011
2011
2011
2012
2012
2012
[code].....
Index Match Not Returning Any Results?
Dec 3, 2013In the attached I have an index/match formula in B15 that I cant get to return any results not even a N/A#
Quick Quote Tool.xlsx
Returning 2nd Occurrence Using INDEX And MATCH
Jan 20, 2014I am trying to find the 2nd occurrence in a range of text along 1 column and return the cell one to the left of that 2nd occurrence. I will also need to find the 3rd, 4th, 5th, etc occurences, down the column.
So far, I have a working formula to find the first occurrence and it looks like this:
=INDEX(INDIRECT(A2),MATCH("*SS*",INDEX(INDIRECT(A2),0,2),0),1)
How would I find the 2nd occurrence?
what if the formula looked like this?
how would I find it's 2nd occurrence?
{=INDEX(INDIRECT(A2),MATCH(TRUE,ISNUMBER(MATCH(INDEX(INDIRECT(A2),0,2),{"CF","LF","RF","OF"},0)),0),1)}
Sumif With Index And Match Is Returning Too Many Arguments?
Mar 2, 2014I am trying to sum the data in "details sheet" column H into "monthly sheet" based on the period and type match.
I am not sure where I am going wrong as the column references returned values that they should. However, the values in Col H from details sheet are not being summed up based on the criteria into monthly sheet.
I am getting zero amounts.
Index With Multiple Match Formulas Returning Undesired Value?
Nov 20, 2012I am building a tool for work, and in one of the sections of the main worksheet, I would like the cells to pull specific data from another worksheet that contains the results of a web query. The web query pulls a table of data, with a double header (rows 3 and 4). One column header is for the date and the other is for the time the data below corresponds to. There are also row titles along the left hand side.
I need a formula that will find the column that meets two conditions:
1) Today's date
2) A specific time (referenced from a cell on the main sheet)
It must then pull the data from the cell in that column that is in the row marked "Total".
Here is an example of the data set from the web query:
Excel 2010BCDEFGHIJKLMNOPQRSTUVWXYZAAABACADAEAFAGAHAIAJAKALAMANAOAPAQARASATA
UAVAWAXAYAZBABBBCBDBEBFBGBHBIBJBKBLBMBNBOBPBQBRBSBT3
Total19-Nov19-Nov19-Nov19-Nov19-Nov19-Nov19-Nov19-Nov19-Nov19-Nov19-
Nov20-Nov20-Nov20-Nov20-Nov20-Nov20-Nov20-Nov20-Nov20-Nov20-Nov20-Nov20-Nov20-Nov20-Nov20-
Nov21-Nov21-Nov21-Nov21-Nov21-Nov21-Nov21-Nov21-Nov21-Nov21-
Nov22-Nov22-Nov22-Nov22-Nov22-Nov22-Nov22-Nov22-
Nov23-Nov23-Nov23-Nov23-Nov23-Nov23-Nov23-Nov23-
[Code]......
I have done quite a bit of looking on the web and tried out several different formulas/variations. I think I'm getting close, but just can't get it quite right. Here are a couple that seem close and their results:
=INDEX('Rodeo Data'!$D$5:$JS$50,MATCH("Total",'Rodeo Data'!$B$5:$B$50,0),MATCH(J3,'Rodeo Data'!$D$4:$JS$4,0)*AND(MATCH(TODAY(),'Rodeo Data'!$D$3:$JS$3,1)))
This one correctly finds the date and "Total" row, but seems to ignore the MATCH(J3,'Rodeo Data'!$D$4:$JS$4,0) section, which is designed to find the specific time in row 4. It returns either the "Total" row value from the first or last column with the correct date depending on which match type argument I use.
=INDEX('Rodeo Data'!$D$5:$JS$50,MATCH("Total",'Rodeo Data'!$B$5:$B$50,0),MATCH(TODAY()&O3,'Rodeo Data'!$D$3:$JS$3&'Rodeo Data'!$D$4:$JS$4,))
This one returns the standard "#N/A" error message.
I am using Windows 7 and Excel 2010. "Rodeo Data" is the name of the sheet that contains the web query data I have included. The J3 and O3 references are cells in the main worksheet that contain the time I want the match function to find.
The desired output from the formula would be if I referenced it to today (20 Nov 2012) and 19:45, it would return the value of 65,826.
It may also be worth noting that the number of columns and rows in the data set is dynamic.
Index IF Match Formula / Returning Room Number That Matches The Hours Used
Mar 21, 2014I am trying to find a formula that populates a room number based on the number of hours used. I have a chart that is by building but multiple rooms within each.
Where I am having trouble is when there are more than one room with the same number of hours used then sometimes the formula populates the wrong room number.
Attached is my example spreadsheet of my chart. Book1.xlsx
I have shown what I need, what I have tried and a blank space to show where I need it to go.
VLOOKUP / INDEX / MATCH Function: Match Data From 2 Independent Sets??
Oct 8, 2009I am trying to match data from 2 independent sets, formatted slightly differently so not sure which function would work best for me. From the attached file, I am trying to match the date and time stamp (in cell A1) with that from the other data (in this example in cell E1) and return the data (from cell F1) to cell C1. So basically any date and time stamp before 04/03/09 04:00 will return a value of 44 (this value should appear, therefore in cells C1 - C30)
View 2 Replies View RelatedInserting An INDEX,MATCH Function Into A HYPERLINK Function Instead Of Cell Reference
Mar 20, 2009Another interesting dilemma to solve. Using this formula:
View 2 Replies View RelatedNesting Index / Match Function Within Vlookup Function?
Dec 3, 2013let me start by saying that I know an example workbook would be useful here, but the part I'm struggling with is the [managementroster.xlsm] file, and there is A. no way I can release it to the internets and B. its so huge/complicated I couldn't even begin to reproduce a portion of it, scrubbed of data, and hope to maintain its functionality in a meaningful manner.
[Code]....
This formula checks a staff number on this spreadsheet, and then goes and looks at the staff number on the roster. Once found, it returns that staff members roster, but changes any manager codes in the MRC list to Mgr, and changes all other roster codes to Free.
I now need this formula, before altering roster codes to Mgr or Free, to only return codes that are a match for another table (or after really. I don't particularly care, so long as only codes are shown that match data from another table). I think an index/match function would do the trick, but this forumula is already at the edge of my excel ability, nesting another function within it is completey beyond me. The relevant cells for the index/match function would be:
This first Match function targets the column. $E3 is the date required, $BA$1:$DN$1 is the range the dates are entered in
Match: Lookup value = $E3
Lookup array = '[ManagementRoster.xlsm]Vacancies!'$BA$1:$DN$1
match type = 0
This second Match function targets the row. $A$4 is the department name, $B$434:$B$452 is the range where all departments are entered
Match: Lookup value = $A$4
Lookup Array = '[ManagementRoster.xlsm]Vacancies!'$B$434:$B$452
match type = 0
Index: array = $BA$434:$DN$452
So I think my final function is
[Code] .....
But I have absolutely NO idea where it would fit within my first formula, or how to code it so that my original formula only reproduces results that are found in both sheets, or anything.
Excel 2003 :: Returning Multiple Values From Index?
Apr 20, 2013I am using the following formula:
=IFERROR(INDEX(drange,SMALL(IF(AND(qrange="SH",trange>30),ROW()-6),ROW(A1))),"")
to return the name (drange) of a person who was visited by "SH" (qrange), more than 30 days ago (trange).
There are faults in my formula, and if I'm honest I don't entirely understand it !
I need to return all of the names of people who were visited by "SH" more than 30 days ago. So I need the next value, and the next which is also over 30, by copying the formula down to the next cell and the next. My problem is that I get the first value (which is correct) and then the next ones are blank.
To make matters worse, the first value I get is only correct if i DON'T enter it as an array. If I do enter it as an array, I get the first row of the spreadsheet.
Using Excel 2003
VLOOKUP / INDEX And MATCH To Return All Values That Match
Feb 4, 2014I have two sheets of data , sheet A and Sheet B.
Sheet B contains a column called "Name" and for each name, and for each name there are corresponding numbers. In sheet A, I have a "list of interest" in column A. What i want to do look through the data in sheetB to find a match from the list of interest and return the corresponding letters, located in column A.
I have filled out the first two rows of results that should be returned as an example.
One idea i had was to put a vlookup formula in each column result 1 to result 6 so i can catch all 6 "Serves" columns from column B, but there may be duplicates in the serve columns and vlookup only reports the first match.
INDEX / MATCH Multiple Ocurence Match Values
Jul 11, 2008INDEX/MATCH multiple ocurence match values needed
View 9 Replies View RelatedUsing Index Match Function?
Mar 24, 2013I've been working on a payroll program for my small biz. I'm close to done BUT...When I use the Index Match function in a cell it works great. However I need to copy it down a column to work for pay periods going forward. When I copy it down of course it puts zeros or N/A.
Columns:
Gross Fed FICA Medicare State Net
F G H I J K
Gross is user input. FICA Medicare State and Net are simply calculated on the sheet. But to get Fed Income tax I use the Index Match function and it works perfectly. The rows increment properly with each new user input.
My question: Fed Income tax is dependent on what the Gross is in order to look up the tables with the Index Match function. How do I get the result of the function into column G? Can I increment up Column G and ignore the zeros that dragging the function down G creates?
Index And Match Function In UserForm
Feb 27, 2014I would like to have an Index & match function in my userform.
I know that i must use it like this Application.WorksheetFunction but i am not able to do it.
User select a code and then in next text boxes, description and price should appear.
Index-match Function Across Different Worksheets?
Mar 31, 2012I have different worksheets to contains information from different years. To make it comphrensve, I have created a mastersheet which contains all the info across the worksheets. And once I make an entry in the worksheet, I hope the mastersheet can be updated automatically. the function I set is
INDEX('2011-12'!K$4:K$7,MATCH(Master!$B5,'2011-12'!$B$4:$B$7,0),1).
Yet, my problem is..... once I perform sorting in the mastersheet, the cells are wrongly matched. So, I just wonder how I can revise the function?
Index And Match Function Not Working?
Sep 27, 2012I am trying to use index & match function to extract data from data base with has multiple critera in rows as well as cloumns but it is not giving correct results.
Example:
A
B
C
D
E
[Code].....
In C9 I typed =INDEX($B$2:$E$6,MATCH($A9,$B$1:$E$1,0),MATCH($B9,$A$2:$A$6,0))
The result I got was #Ref!
what formula should I use in C9 to get 20, C10 to get 5 & so on
FB1 to FB4 are column headers (critera)
GL 1 to GL5 are row headers (critera)
INDEX And MATCH Function Across Two Worksheets
Apr 5, 2013I have two worksheets, named as follows:
Worksheet1: SUMMARY
Worksheet2: ART 2013
'ART 2013' contains a list of staff numbers in column C16:C752 and a list of dates in column M16:M752 (formatted as "mm-yyyy")
Within 'SUMMARY' cell G12 contains the date 04-2013.
What I would like to do is achieve a function that will look at 'ART 2013' columns C and M in and where the date in Column M is equal to cell G12 (04-2013) of the 'SUMMARY' worksheet excel will return the Staff Number in 'ART 2013' column C.
VBA Index Match Function With Errors
Sep 29, 2013I'm trying to replicate the iferror index match function from excel into vba. The excel version is
=IFERROR(INDEX('billing-data'!B:C,MATCH(C2,'billing-data'!C:C,0)+0,1),"")
Which works fine. In vba I have:
Cells(i, 19) = Application.WorksheetFunction. _
Index(Sheets("billing-data").Range("B:B"), _
Application.WorksheetFunction.Match(Sheets("payment-data").Range("c" & i), _
Sheets("billing-data").Range("C:C"), 0), 1)
There are some mismatches and I get an error message with this which prevents the all the data from being displayed.
I'd like to show Cells(i, 19) as null or blank if there is a mismatch or error.
Make Index And Match Function Dynamic?
Aug 18, 2014I have attached a workbook.
I have a calculated value in H2. This value will correspond to values in the table provided. This value is dynamic and will change based on criteria that will be added.
The value H2 is a combination of to "letters" D1 and A2 or A4 and B1 i.e. trace back where the intersection of H2 occurs within the table
In Cells A8 and A9 I am trying to represent which combination of letters will result in an intersection of the value H2. In the example provided it is C and A.
What i would like to do is have Cells A8 and A9 be more dynamic. So if for example the value in H2 changed to say R12,06 then the intersection would be B and B. Therefore Cell A8 = B and Cell A9 = B
The formula is cell A8 and A9 doesn't cater for this as the range is fixed. I need a dynamic range for the index and match function based on the where the intersection of H2 happens to be in the table.
Taking An Index Match Function One Step Further!
Apr 8, 2009I'm matching ISO country codes to country names.
This works great as long as the 'lookup_value' portion of the match fuction matches the 3 digit code on Sheet3.
Is it possible to return my desired result without this matching perfectly.
So a value in 'Sheet1 Column A' that begins A344xxxxxxx will return the same result in 'Sheet1 Column F' as if 'Column A' just had a 3 digit number.
Index/Match Function Inside An Array
Jan 20, 2010Solution for all: {=SUMPRODUCT(SUMIF(Sheet1!$A$2:$A$16,$F$34:$F$40,INDEX(Sheet1!$B$2:$K$16,0,MATCH(T$10,Sheet1!$B$1:$K $1,0))),U34:U40)}
Say I have an Excel workbook with two sheets: Employee Hours and Employee Wages. On the Hours sheet I have 31 columns (Jan1 - Jan31) with inputs for the number of hours worked by each employee by day. On the Wages sheet I have listed the same 31 columns with their wages each day (I do this to factor in wage increases that occur fairly often).
My goal is to use an INDEX/MATCH function to calculate the total daily compensation for each day on the Wages sheet by multiplying hours*wages for all employees that day. Here's the code I'm using:
Using MATCH And INDEX Function With Multiple Criteria?
Feb 9, 2010We're selling language courses that have a different price depending on when a course is taken. We're trying to build a price quote application that needs to look up a certain school and course and price driven by a start date.
How can I build a lookup function that says: pick the price of school X and course Y when the start date falls between dd/mm/yyyy and dd/mm/yyyy?
I manage to build a look up function with MATCH and INDEX when the condition of start date is exactly matched but dont know how to instruct it to match a value between a start and end date.
Index Match Vs D Function To Summarize Data
Oct 24, 2008I have a project that has several worksheets of "summarized" data all pulled from one worksheet. The data worksheet is run through an external program and pasted into the workbook to update the information.
To this point I have used tons of index match array formula's to pull the information but I've found this to be extremely inefficient because there are hundreds if not thousands of formulas, and it takes several minutes to update. The file is also around 3MB which is way too big.
I was thinking about using VBA to simplify the worksheets, but then I came across an article about D_Functions and I'm thinking they may be the solution to my problems.
However there is one catch...I'm not sure how I would build these formulas to work in my worksheets. I understand the principle behind the D_Functions, but I can't seem to grasp the concept of integration and making it work in my scenario.
I've attached an example of this workbook, it has most of the forumla's deleted out to reduce the file size, but it should give you an idea of what I'm doing. Once you open it you'll have to unhide some columns to get to the nitty gritty of the sheet.
Feel free to take a gander...I'm open to any suggestions you may have at this point (except to trash the whole project hehehehe ). If you find a solution please explain the concept behind it. I really want to learn how to make this work rather than plugging in someone elses formulas.
Translate Index / Match Function To VBA Code
Mar 17, 2013How do I translate this to a vba code?
=INDEX('Workers List'!D3:D13,MATCH('Workers List'!C4,'Workers List'!C3:C13,0),1)
what i have done is
test = Application.Index(Sheets("Workers List").Range("C3;C13"), Application.Match(1, Sheets("Workers List").Range("D3:D13"), 0), 1)
But i keep getting an error, may i know whats wrong with it?
Index Match Or Array Search Function
Jul 30, 2014Here is the table I am working with
Date
Open
High
Low
Close
Volume
Adj Close
Semi-Annual Yield
Theoretical Bond Price
Index
Coupon
Total Value
Peaks
Troughs
[Code] ..........
The Relevant columns would be "Date" column A cell 1, "Total Value" column L cell 1, "Peaks" column M cell 1, and "Troughs" column N cell 1. What I basically want to do, in the next column, column O, is this: If cell N# = "Trough" find the previous M cell = "Peak" and take the L cell in that "Peak" row and subtract the L cell in the Trough row from it (like =(L4-L9)/L4)). Then in column P, if the percentage drop was 5% or greater, I want to find the days between the trough we are looking at, in cell n10, and the NEXT Peak, cell M11, using the corresponding dates in Column A.
HOW TO Stop #NA Appearring In Index And Match Function
Nov 11, 2009I have this equation
=(INDEX(abc!B8:D18,MATCH(Sheet1!C39,abc!A8:A18),MATCH(Sheet1!D39,percentiles,0)))
it gives me this #N/A. I'd rather have it show $0.00.
Match Formula Returning Values
Jan 27, 2014I have two tabs (In-Transit) & (AC) column A in both sheet have a "Concatenate" that i copied and pasted and values only and also switch the format to "Text" on both tabs. I do a vlookup
[Code] ......
and it returns the results i want....But then i was thinking due to the volume of data what if the value in column A is found twice on tab "AC".. i wouldn't know with a "Vlookup".
So trying to build a Index/Match formula
[Code] ....
I also returns some good results, but i also get some back as #REF. I also get #NA and both of the formulas and those are valid no matches...