Returning Where Function Is Located?
Aug 18, 2009
I am new to VBA programming in Excel (currently 2003) so hopefully this isn't a "dumb" question.
I would like to re-arrange a group of data from a table of several rows and columns to a single column where the data from the first row is translated to a column then the second row is appended to the end of that data ....
ie:
( 1 ) ( 4 ) ( 7 )
( 2 ) ( 5 ) ( 8 )
( 3 ) ( 6 ) ( 9 )
to
( 1 )
( 4 )
( 7 )
( 2 )
( 5 )
( 8 )
( 3 )....
I thought a user defined formula would be a good place to start but am having problems getting the address of the cell that the function resides in to use to calculate the offset from a fixed cell (to be entered into the function as a argument). In other words, how do I get the address of the call that a UDF is entered in into the UDF? activecell.address is returning the cell that was last clicked not the cell were the UDF resides.
Secondly is there a better way to achive the results that I am looking for other than through a function? The size of the table will vary from worksheet to worksheet. I would also like to add an argumnet that lets me exclude cells with certain content from the resultant list.
View 6 Replies
ADVERTISEMENT
Feb 5, 2014
I have 2 tables where I need to pull data from one table into the other.
Table 1 - pull data here
A
Site
B
Begin Date
C
End Date
Rate
[Code]...
For example: site 77 in table 1, I need to pull whatever rate is shown for site 77 in table 2 for the date range specified on table 1. So the correct answer for the first row site 77 in column E would be .02. Notice there is a problem...mainly the dates do not match exactly. I just need the rate the applies for the majority of the time.
Another example. For table 1, site 174 from 2/11/11 to 2/22/12, the correct answer in column E (pulled from table 2) would be .02, even though Column D shows .00.
View 1 Replies
View Related
Sep 17, 2008
I have an IF Function that if C4 says HUD then it returns the infor in a range of cells on the HUD worksheet, which is a separate worksheet from where this formula is {=IF(C4="HUD",HUD!A1:C100,"")}. I have also used =IF($C$4="HUD",HUD!A1,"").
But now, on the cells that it is returning, it puts 0 in cells that are blank on the other worksheet. What can I add to this formula to eliminate that?
Both of these functions are working otherwise. They are just returning 0 in cells that were blank.
View 9 Replies
View Related
Nov 7, 2008
I'm trying to figure out an Internal Rate of Return for a spreadsheet. The answer is supposed to be: 29.42% however I'm getting 25.94%. Does anyone know what I'm doing wrong in my IRR function on the Profitability worksheet? I'm currently using Excel 2007 by the way.
View 4 Replies
View Related
Apr 24, 2014
trying to create a 'countdown' to time of macro completion (based on a static performance time of 1:48). What I want to do is compare a time (ProgTime) set as static at the beginning of the code with 'TIME' and return the difference in seconds. I use the following code:
[Code] ....
When I step through, I can see that ProgTime and Time have different values and yet 'Test' always returns a value of '0'. I tried using 'Now' instead of 'Time' and the same result ('0') occurs. I have experimented with declaring 'Test' as an integer, a long and a date and the result is always the same! I've tried using 'Seconds() around the datediff to ensure an answer in seconds, I've tried 'format' around it with multiple decimal places to make sure I'm not missing a tiny value: Nothing seems to do the trick!
View 13 Replies
View Related
Sep 2, 2009
I have data concerning documents people have to write, which is updated weekly. Is there a way of looking up a name and then returning all the documents that they have to write. I have tried a vlookup, but this only returns the first entry and not the lot. Also i would prefer the document data for each person to be returned in to one cell.
View 3 Replies
View Related
Dec 11, 2009
I have 3 columns of numerical data. In my fourth column, I would like to return the minimum value from the 3 previous columns (=min). However, instead of returning the lowest number, I would like it to return the column title (=text) of the lowest number. I haven't been able to locate a function that does this.
View 4 Replies
View Related
Dec 9, 2012
I am working on a spreadsheet that deals with times such as a work schedule, how every the schedule cells are in a time format, and my if function will only return "check"(which is false). my code works if it remove the time formatted cells but i want to keep the document in its orginal format.
=IF(Mngmt!F16="PH","",IF(Mngmt!F16="OFF ","",IF(Mngmt!F16="VAC ","",IF(Mngmt!F16="8:00:00 AM", "MIKE", "CHECK"))))
The bold and under line portion is where my problem is at.
Its looking to the mngmt tab to find f16 when it equal 8:00:00 AM (scheduled time in time format) but returns ""check"(false).
View 4 Replies
View Related
Jun 15, 2009
I have a function that works out which is the last column containing data on a worksheet, but for some reason it is alwys retuning 0.
View 14 Replies
View Related
Apr 27, 2007
My problem is that I am getting the N/A error in cell M3 if L3 is empty. I would like the forumla to 'ignore' cell L3 if it is empty. I do not want a zero put in there. I have looked up information on ISBLANK function but the more I read the more confused I am getting
View 6 Replies
View Related
Oct 12, 2007
I have two columns A & B. If I enter "Short" into Col A, I want "Long" to automatically appear in Col B, and vice versa. This is the code I have created so far. =IF(C4="Short","Long",IF(C4="Long","Short",IF(C4="",""))). This works but when I paste the formula into all cells in Col B, I get "FALSE" showing up in every cell. How can I stop the "FALSE" from populating every cell in Col B while Col A remains blank?
View 4 Replies
View Related
Jun 14, 2014
I have been facing few problems while automation my production sheet through formula.
1-- I want to sort data in the descending order through below formula.
=INDEX($A$23:$C$29,MATCH(LARGE($C$23:$C$29,ROW(B3)),$C$23:$C$29,0),MATCH(H$22,$A$22:$C$22,0))
when two candidates have the same percentage then this formula does not work.
View 1 Replies
View Related
Jan 24, 2014
I'm trying to compare three formula results and return the largest number. Ex.:
2217922
The first three numbers are formula results and the last is the following formula:
=IF(O5>P5,O5,IF(P5>Q5,P5,Q5))
Unfortunately, with the list below, you can see the last number (the comparison formula) isn't always the greater of the three:
2217922
2017920
01799
01399
01399
01299
01299
01299
01299
01199
01199
01099
0088
0077
0077
I've also tried other formulas, with no success:
=LARGE(O5:Q5,1)
=MAX(O5:Q5)
=IF(MAX(O5:Q5)=O5,O5,IF(MAX(O5:Q5)=P5,P5,IF(MAX(O5:Q5)=Q5,Q5,"Error")))
What's odd is that if I create the formulas above independent of the specific formula data (O5, P5, and Q5) and just type in numbers, those formulas do exactly what they should. Can I not compare data returned though formula calculations?
View 12 Replies
View Related
Dec 15, 2009
In cell G51 of sheet "My Overview", if two people have the same scores it pulls through one person twice in F51 and F52, how can i overcome this?
View 4 Replies
View Related
Feb 7, 2007
A client has a registration workbook for each student which contains 3 types of worksheets, A) Transcript B) Registration and C) Grade sheets. Each file has only 1 Transcript sheet and 1 to many pairs of Registration and Grade sheets.
I have a GPA user defined function which obviously can only be used on a Grade sheet. I would like to return an Error if the user trys to use the udf on a non Grade sheet.
Currently I am just returning 1/0 but the smart tag returns #Name. Can I control the text displayed somehow?
View 9 Replies
View Related
Sep 20, 2007
I'm currently working on a program in which some sort of recursive looping seems logical.
The relevant part of the code I've currently written looks like this:
Sub hello()
Dim Max_stream As Integer
Dim j, jj As Integer
Dim P_sum, P_min As Double
Dim antal_in, antal_ut, rad_in, rad_ut, ut1, ut2 As Integer
Application. ScreenUpdating = False
Max_stream = WorksheetFunction.Max(Worksheets("Data"). Range("B65536").End(xlUp).Value)
For j = 1 To Max_stream
The problem with the code above is the last If, in which the function "rekursivloop" calls itself. I don't know if this type of formulation is correct, but for the cases the If condition is TRUE (ie ut1 <> ""), the function does not return any answer. Does anyone see an error in the logic or have some example for how to write similar recursive loops?
View 8 Replies
View Related
Sep 29, 2012
I am currently using the Match and index functions to search for specific criteria and return specific data based on that criteria. The problem is the formula is returning the first value at the beginning of the month rather then the end of the month value that I am asking for. I have my criteria set to zero so it should be a perfect match. with the live worksheet I have several tabs for different years. I want to take the end of month balance on each of those year tabs for each month in each fiscal year and add them together. My formula only has the one month because I am unable to get it to work much less adding in all of the years information. I have the employees choosing EOM for the last transaction posted during that month and that calculates the month number in the field next to it. I was thinking I could use the match to look for a specific month in that column and return the balance adjacent to it at that point.
View 7 Replies
View Related
Mar 20, 2013
In an excel sheet, I am using a macro to filter. Macro code is as follows. When I run this macro, it returns 4 rows matching the criteria from 560 rows in the excel sheet.
VB:
ActiveSheet.Range("$A$1:$I$566").AutoFilter Field:=1, Criteria1:= _
">=11/11/2012 22:13", Operator:=xlAnd, Criteria2:="<=11/12/2012 6:47"
I want to use the same criteria in the vb.net code, to do same thru vb.net. But, when I run the same code in vb.net, it just returns only 1 row (1st row only).
VB:
[FONT=Consolas][SIZE=2][COLOR=#0000ff]xlsRange1.AutoFilter(Field:=1, Criteria1:=">=11/11/2012 22:13", Operator:=Excel.XlAutoFilterOperator.xlAnd, Criteria1:="<=11/12/2012 6:47")
This returns 1 instead of 4 expected.
View 2 Replies
View Related
May 23, 2007
I have attached a sample spreadsheet which describes my problem.
In C2 and C3 under the first business coalitions column, I have written in text what I would like to be displayed automatically with a formula. The trouble is that, as you can see, Abbott Laboratories is a member of 3 business coalitions. Therefore, a simple vlookup doesn't work because that would only return 1 result.
View 5 Replies
View Related
May 18, 2014
I want to have C9 populated with a budget type from H1, I1 or J1. How do I create the formula that checks which budget type the value in F9 is?
I am using excel very infrequently.
Screen Shot 2014-05-18 at 12.52.26.jpg
View 6 Replies
View Related
Jan 2, 2007
I have created a drop down menu wseveral items for the first time. The drop down is located on several worksheets. What I'm trying to do is find out if there is a way to do 2 things.
A) capture a total (numerical value) of the number of items selected from the list on each worksheet. ex. if on worksheet #3 15 cells contain data from the drop down cell A1 on worksheet #1 would = 15.
&
B) capture a total (numerical value) of the number of times a specific item was selected from several worksheets. ex. if ABC was selected from the drop down menu 8 times on worksheet #2 & 6 times on worksheet #3, cell A2 on worksheet #1 would = 14.
View 10 Replies
View Related
Jun 17, 2009
is there a VBA way to determine an unknown path in which a KNOWN WB is located !?
Assume a WB named: 1X1.xls Located at C:TEMP
[In case the user uses more than one partition and/or more than one HD - it might alse be located at: D:TEMP
The known open command for a known file AND Path is:
View 14 Replies
View Related
Jan 30, 2013
How to pull data with a VLOOKUP to a file located on a Server.
My big problem is not understanding the syntax of the Server location. I've provided it below (obviously with some character changes).
I have a file located on my Hard Drive. I need to perform a VLOOKUP from A2 on this spreadsheet. The File on the Server is called "LookupTest.xls". The Range of Data is from Sheet 1 and is from A2:C4 and I need to pull the data from column C depending on what is selected from A2 from the file on my HD. I understand how to use VLOOKUP, just not when I'm pointing to another file on a Server.
Server mapping from Windows Explorer:
rbbabc$ on 'RP17409 - ABC Database (AHSSRVVN678.tge.com)'
Again, that server mapping is fake, as I changed it, but this is how it looks on Windows Explorer.
I'm trying to keep a master file of Data on a spreadsheet found on a server so that one master file can be updated, and several other tools pull from that Master File on VLOOKUP, Validation Lists, etc.
View 4 Replies
View Related
Jan 19, 2007
I have a macro that copies data from 1 sheet to another one.
However, in the destination sheet I have no way of know which is the 1st empty row that my data can be paste into.
View 9 Replies
View Related
Aug 10, 2009
I have a sheet where I need to located set-up dates that are greater than 6 months. I dont know if this matters but the cells are not in consecutive rows but are all in column F. I have tried the serveral ways and nothing is working.
View 9 Replies
View Related
Apr 2, 2007
I have a table of data, every entry in the table is different. I need a way in a single cell to determine what column the data is in (and a way to get the row it's in would be nice too), some way to do VLOOKUP and HLOOKUP in reverse.
In the attached example I need a function that can take dog and return "1", "A" or even the header "Animal", if another similar function can return the row, that would be nice also but if I can get the column I can get the row. Example
I've tried a few things with creating an array formula to do matches across multiple columns and I can make a multi-cell array that will flag the right column with the right column number, but any attempt to sum/max/match this array formula returns 0 or #N/A
View 5 Replies
View Related
Oct 17, 2012
I want to be able to link spinbuttons to the cell it is located in automatically, so I can move it around or copy and then paste into other cells. I do not want to use one button to increment a selected cell.
View 1 Replies
View Related
Mar 20, 2014
How do I select the empty cell (once located after using the below loop) so I can paste into it?
[Code] .......
View 10 Replies
View Related
Aug 11, 2009
I currently have a button on a worksheet that loads a userform. I have code written that's not in a in a separate module but in the user form itself. It uses the information entered on the user form screen. When I try to reference data that's on a sheet other than the one that the button is located on, I get a "select method of range class failed" error. I assume that this problem has to do with the button macro being located on a different sheet than the data. Is there an easy fix?
View 4 Replies
View Related
Jan 20, 2008
What is the formula to be used to extract number from a alphanumeric string located at different row?
example:
test123test128test131
test124test129test132
test125test130test133
test126test131test134
test127test132test135
test128test133test136
result: ....
View 11 Replies
View Related
