I want to delete all macros from my workbook (so it will work well in Mac 2008). I went to Alt-F11 and deleted all Macros there and check every sheet and found no references. I did all that and when I try to open it in Excel for Mac it says there are still Macros.
How can I ensure my workbook has no macros?
What is the commands or script for deleting a macro automatically using
another workbook macro.
I've got a macro embedded in a sheet (not in a module)..."Private Sub worksheet_activate()".
I have a macro that copies this specific sheet to a new workbook in order for other users to play with.
Problem is, when they select the new copied sheet in the new workbook, it tries to execute the "worksheet_activate" macro.
I've done searches on trying to delete macros but to no avail....
I want to delete names, formulas, macros of another workbook. For example, A.xls is my codes workbook. From this file, I want to delete the names, formulas, macros (but to keep the values & formatting in tact) of another workbook (there must be a prompt for which .xls file, the names etc. to be deleted). All files are in a same folder.
View 5 Replies View RelatedI need to copy several macros from the Personal Macro workbook to a new workbook that I need to take to another computer. I need to be able to run the macros on that computer. I can only record macros and make minor changes in the VB editor. I do not know VB code.
View 5 Replies View RelatedHow is code or functions kept unique to a workbook? for instance i create a few toolbars that are relevant to "work book 1", however when i open another workbook "2" the toolbars do not function properly or are removed by the opening/closing of the work book, similarly other macros seem to struggle with more than one workbbok open at a time.
View 5 Replies View RelatedIt's simple enough to delete all macros. I have a form that starts as a landing area for a bunch of data then it gets renamed. I want to delete both of my command buttons from the sheet and remove all of my macros. How am I going to pull this off, how can i save it to the sheet the first time?
Private Sub Workbook_BeforeClose(Cancel As Boolean)
'cut command buttons
ActiveSheet.Shapes("CommandButton1").Select
Selection.Cut
ActiveSheet.Shapes("CommandButton2").Select
Selection.Cut
[Code] .........
Is there anyway in which I can open a spreadsheet and then delete any macros which exist in that file with VBA?
For Example
Workbooks.Open "\sysdevwebwCorpAcctSuiteReportsNetProfit.xls"
''Delete Any Existing Macros Code''
Activeworkbook.Save
Activeworkbook.Close
I managed to save workbook as values only by the help of this forum
Now is it possible to disable the commond buttons, when the workbook is saved as values only or can we delete the macro's.
I have several workbooks that contain the same worksheets. The worksheets within the several workbooks are structurally the same but have a different number of elements within the structure of the worksheets. I've written Macros that accommodate the difference in the number of elements in the worksheets and will perform the same appropriate tasks within all workbooks.
I use one of the workbooks for development and as I make changes in the Macros within this development workbook, I wish to update all the macros in the other workbooks.
I've been Exporting and Importing to accomplish the update. Is there a utility available that will accomplish this task? Something like "Copy all Modules from "Workbook1.xls"
So I'm trying my hand at creating VBA buttons and functions that do the following.
Button 1 :
to add a column with every click. The button will create one extra column. So by design there will be at least 1 column. Example if the button is clicked twice it will create 3 columns. I just need a buffer col. (contains no data)
Button 2 :
to delete empty columns leaving only one empty buffer column. That is this button will purge empty columns except the buffer column. OR if ALL the columns are filled, Button2 will create the buffer column.
Eg. I click Button 1 three times. It creates four columns. I only fill two columns. When Button 2 is clicked it will delete all the empty colums except the buffer column. OR I fill in all four columns, there is no buffer column, when I click Button2 it will insert the buffer col.
Button 3 :
to add a row with every click. The button will create one extra row. So by design there will be at least 1 row. Example if the button is clicked twice it will create 3 rows. I just need a buffer row. (contains no data)
Button 4 :
to delete empty row leaving only one empty buffer row. That is this button will purge empty row except the buffer row. OR if ALL the columns are filled, Button4 will create the buffer column.
Eg. I click Button 3 three times. It creates four rows. I only fill two rows. When Button 4 is clicked it will delete all the empty rows except the buffer rows. OR I fill in all four rows, there is no buffer rows, when I click Button4 it will insert the buffer row.
In the sample file there are six columns filled with data. The 7th col is empty(the buffer column). The column after that calculates the average of data in filled columns. There are eight rows with data and the ninth row is the empty buffer row.
The "add" buttons must be able copy the format/formula of the column/rows BEFORE the buffer colums/rows and insert it before the buffer column/row.
I have a sheet with macros that allows users to fill in data from columns F10 to O10 from row 10 to 54.
Column P will then make some computations based on the inputs from col F to O.
Row 55 will also make some computation based on inputs from row 10 to 54.
How to I modify the code below to allow users to either add/delete columns and rows such that it does not fowl up the computations?
The computation does not have to be at column P or at row 55, they can be dynamic and change depending on how many rows and columns the users delete/add.
A little background on what the code does. From Column F to O, the code UNLOCKS the columns only if user inputs date in Cell 3 of that particular column.
Example. Column F is locked from F10 to infinity at the start. Only when user inputs date into F3 does the cells F10:F54 is unlocked for user to input data.
This goes on until column O. I want users to be able to add more columns, or delete ones they don't need.
I need to create a macros to open up 4 other workbooks and run each individual workbooks macro. The work books can be called book 1 to 4 and the macros is call run in each sheet.
When I have tried it manages to open the sheet but not run the macro.
Each week I run a report that produces over 2,000 rows. I have to manually go through and delete things, by the time I am done, there may only be 320 rows left. I would apply a recorded macro, but the report is not consistent each week. There may be more or fewer rows depending on the week.
I would like to be able to run a macro that looks in column B for a specific value and if it contains that specific value, I would like the cells to the right of it to have their contents cleared.
Next, in column C, I have...
Employee2's Name
Employee2's Number
SPACE
[Code]....
I would like to be able to delete the rows, starting from Employee 2 to just before the second SUB TOTAL.
So, all I would have left in column C is
SUB TOTAL
SPACE
is it possible to protect a workbook but still run various macros, i have tried this and the macros wont run
View 10 Replies View RelatedI want to copy some macro's from one workbook to another one. But I don't want to copy all macro's to the new workbook. For example: I have 20 macro's, and only want to copy 2 of them every time.
View 7 Replies View RelatedI have made 7 macros for inserting a blank row above certain text, which are located in single column but in different row. 3 macros are for one sheet and 4 are for other. I am able to run them at once but the changes are getting done in only one sheet (which is active when I run macro)
Below is the code of macro:
Sub Space1()
Dim c As Range
For Each c In Range("D1:D60")
[Code]......
In addition to the code below that hides data if macros not enabled, prevents copy and cut (I know its still possible) I would like to as well as protect the sheets (which works fine) also protect the workbook to prevent moves etc. Unfortunately while the protection may be easily applied, the veryhidden bit to ensure macros are selected then conks out. Does anyone out there know of a way where say the workbook protection may remain and at the same time allow the veryhidden etc bits do their stuff as normal as if the workbook protection was off?
Private Sub Workbook_BeforeSave _
(ByVal SaveAsUI As Boolean, Cancel As Boolean)
If Cancel = True Or bIsClosing = False Then Run "HideAll"
If SaveAsUI = True Then Cancel = True
End Sub
Private Sub Workbook_Activate()
Dim oCtrl As Office.CommandBarControl
'Disable all Cut menus
For Each oCtrl In Application. CommandBars.FindControls(ID:=21)
oCtrl.Enabled = False
'oCtrl.Enabled = True
Next oCtrl...................
I want to run a recorded macro on the whole workbook at once, not just on the active worksheet.
View 3 Replies View RelatedIs there a way to prevent a workbook from opening unless macros are allowed?
View 2 Replies View RelatedOur department receives weekly and fortnighly updated workbooks from a number of different departments. Each workbook contains 10s of worksheets. Our department analyzes the data and generates reports from those worksheets.
I have developed a few macros to automate the report generation for making the computing of my colleagues easier.
Now, the problem is that all the macros are developed behind individual sheets and some modules. For this reason, my colleagues have to copy each updated sheet and paste over the older ones individually, each and every time. It is really quite time-consuming task - deleting older data from all the worksheets and then copying fresh data on each of them, one by one.
They want to make their life easier by just replacing the entire workbooks with the new ones and still want the macros functioning, as usual.
My concern is how I can put all the code in a separate workbook and how to reference data from the other workbook.
I have created an Excel Workbook and this Workbook has a VBA code that enforces an expiry date of the workbook (TimeBomb from cpearson.com). So, if the expiry date has passed, the workbook will not open. But since it is VBA related, the expiry date will work only if one has enabled macros. If macros are disabled, the workbook will open regardless of the date.
So, is there a way for Excel to check if macros are enabled? and is there a way for Excel not to open the workbook, if the macros are disabled?
I've used excel for awhile now but never really tapped into the tough stuff. I'm trying to create a workbook for work for Purchase Orders. I figured excel would be workable. The big thing I need is that for each worksheet that is created, I need it to automatically have the next P.O. number on the sheet. I have no idea if that is possible though. Each worksheet will be the same style but the P.O. would automatically change from say 105 to 106 when the new sheet is made. I was hoping maybe the date could automatically be entered as well. That doesn't have to happen but it could be helpful. Working with Excel 2003.
View 14 Replies View RelatedI'm trying to open a workbook that someone sends me once a week, and suddenly it's timing out (hourglass) and not opening.
I know for a fact that he put in some formulas (but no macros) that reference a file only he has access to.
And, auto calculation, he leaves on.
I see the file open on one of the 3 sheets in it, but the hourglass never goes away, and when I Ctrl Alt Del, it says Excel is Not Responding.
Is there any way I can get this file to open so that I can fix it or transfer the raw data to a new workbook?
First of I have a workbook, that runs several macros. All works fine. However I need to better secure the workbook. I realize that there is no guarantee on the security with excel but am hoping for something to solve the problem stated below.
When a user (with high security settings) opens the workbook in question, I would like the workbook to CLOSE out if the user chooses to disable macros when the asked by excel.
I have a "template" that runs a few processes and then saves the results in a new workbook...is there any way that I can have my vba code save the workbook without saving any of the vba code in the new workbook?
I would also like to exclude one of the worksheets from the new workbook if possible (but the first part is more important).
The current code I have is: ...
A macro to automaticlly run macros in my workbook when I schedule it to open through scheduler at a given time.
I would like to place a command in a macro to have a workbook replicate itself WITHOUT replicating its macros. Is that possible? Is there a command? I am using Excel 2003.
View 9 Replies View RelatedMy son just upgraded my computer from 2000 to xp - a new application on a new hard drive. in the process, Excel was upgraded from 97 SR-1 to 97 SR-2.
My checkbook is on excel, and I really need to open it! We just moved to a new location, with the typical problems with email, internet etc.
I can open workbooks without macros. But I cannot open any with macros.
I get this message:
"Could not register the Visual Basic environment."
When that window is closed, the next one says:
"An error occured when initializing the VBA libraries (126)"
Is it possible to open a workbook via vba, but disable the macros? I know this sounds strange, but the workbook is coded to prevent users from saving it, and the only way to save it is to either open it with macros disabled or change the variable OKtoSave to true, but the variable is global only to the sheet and I can't find a way to change it through a macro written in my personal.xls workbook.
View 5 Replies View Related