Delete Currently Displayed Combobox Item With Commandbutton Click
Dec 13, 2009
I have a combobox which is manually scrolled through using the down arrow key. As the different combobox items are viewed, I would like to be able to delete the currently viewed item from the list if desired by clicking on a commandbutton.
The list items are contained in the range of B2:B500. Also, since this places a gap in the list, I would like to shift the remaining cells values in column B up to close the gap.
View 9 Replies
ADVERTISEMENT
Feb 16, 2013
Excel Userform
VB:
'enables user to click [U]highlight and select[/U] an item in ListBox1 and ListBox2 item (same row in index) is also [U]highlighted[/U] (highlighted only not selected)
Private Sub ListBox1_Click()
ListBox2.ListIndex = ListBox1.ListIndex
End Sub
Question: Is it also possible to enable a user to click to select an item in ListBox1 and ListBox2 item is also selected simultaneously (same row in index). Is there excel vb code to do this?
I think the code may be along the lines of the ListBox SelectedIndex property. What would be the Excel VB code equivilant for the ListBox SelectedIndex property, if so?
View 8 Replies
View Related
Feb 7, 2014
I wonder if it is possible to make a macro that right clicks a cell and then chooses a option from the list?
View 11 Replies
View Related
Jan 4, 2013
To refresh a UserForm ListBox when new items are added, I Unload and Show the Userform as part of the procedure.
Code:
Private Sub CommandButton4_Click()
'do stuff
'do some more stuff
'do a few more things
'finish doing stuff
Unload Me
UserForm2.Show
This returns the UserForm to its Initialized state and displays the refreshed list.
But, this requires the user to click CommandButton6 to continue adding additional items. If CommandButton4 code could click CommandButton6, the UserForm would Show in its "add item" state...I think. Is there a way to programmatically click a CommandButton?
I've already tried 8,321 ways without success...(OK, maybe only 4 ways)
View 9 Replies
View Related
Jun 24, 2007
I am working with a large legacy file/program which has a lot of issues. Foremost, and unfortunately this cannot be changed, is that all of the controls were placed directly on the worksheets instead of on Userforms. The actual code from the legacy file is excessively complicated, so I created this simple example. Sheet1 has one textbox and one command button. Sheet 2 is blank. I want to be able to click the command button or use the Enter key on the command button, to trigger the Click Event. Clicking works fine. When using Enter, if Sheet2.Activate is commented, everything works fine. If Sheet2.Activate is executed, then Excel crashes.
Private Sub TextBox1_KeyDown(ByVal KeyCode As MSForms.ReturnInteger, ByVal Shift As Integer)
Dim bBackwards As Boolean
Select Case KeyCode
'Only look for tab, return, down arrow, up arrow
Case vbKeyTab, vbKeyReturn, vbKeyDown, vbKeyUp
Application. ScreenUpdating = False
'Do we need to go back to previous control
bBackwards = CBool(Shift And 1) Or (KeyCode = vbKeyUp)
If bBackwards Then TextBox1.Activate Else CommandButton1.Activate
Application.ScreenUpdating = True
End Select
End Sub
Private Sub CommandButton1_KeyDown(ByVal KeyCode As MSForms.ReturnInteger, ByVal Shift As Integer)
Dim bBackwards, bForwards As Boolean
Select Case KeyCode
Case vbKeyTab, vbKeyReturn, vbKeyDown, vbKeyUp
Application.ScreenUpdating = False...................
View 9 Replies
View Related
Jun 28, 2008
I am experiencing exactly the same problem as described in Textbox Text Increases In Size With Click here, so browse to the following location to view the sample file:
[url]
username "turbocam"
password "danielsresort"
View 7 Replies
View Related
Jun 14, 2014
I am getting close to finishing the drop down menu capability when filling in column L in tab Transactions. However, there is a snag. When I enter part of account say "fin" (the important part here is that the part of the word should not be the beginning of the account name) - then I select an account from the menu - but it does not stay in the cell if the part of the name is the beginning of the account name - all is fine.
View 4 Replies
View Related
Jun 11, 2009
I like the way the names auto fill. Though would ilke to have it so say when roc is entered it shows as a dropdown so you can see that there are more than one ROCHESTER.
Like a search i guess, That would be valid to the first to letters. so if you had name donald, david & daffy when D is entered it showes all three then when DA is showes only David & daffy.
The project that i will 1st use this on is a contact address ph book.
View 14 Replies
View Related
Jun 5, 2006
How do I delete a command button I've entered on my Worksheetright-clicking does nothing;control-key+right-click does nothing alt+ctl+right-clicking does nothingWhat's the secret?
View 8 Replies
View Related
Jun 4, 2014
I have a 2 column listbox storing Policy Number and Number of pages. Suppose it has 10 records. Now I want the code so that when I double click on a particular policy number of the listbox then I should be able to make the changes in that. (it might be changing the ppolicy number or number of pages if the user types something wrong by mistake)
View 1 Replies
View Related
Apr 22, 2014
I've created a ListView4 object on MyForm and called it 'MyListView'. I'm able to successfully display it and populate it with a list of items (2 columns). So far, so good.
I'm trying to intercept a double-click on an entry in the listview so I can process the selected value and close the ListView. Unfortunately, the MyListView_DblClick event apparently does not get triggered (I've also tried other events, but can't get them to work also).
View 2 Replies
View Related
Oct 2, 2013
A list box selection works fine on my computer but on a friends Windows Vista PC the following happens:
Selecting items near the top of the list works fine. 1/4 of way down a mouse click on an item selects the Next item.
1/2 of the way down in the list, the mouse click on an item selects the one 2 or 3 further down, etc., etc.
View 1 Replies
View Related
Feb 21, 2013
Excel 2007/2010.
Hope this is fairly easy to solve. I have Screen #1 with a listbox with a CLICK event. The event populates a combobox below (with items based on listbox's selection). Listbox is NOT multi-select. Code runs fine manually, i.e., user opens screen selects from listbox, then can select from combobox.
I now what to open and make selections from another form/screen, Screen #2. I've written code to select the proper item from Screen #2's listbox but this does NOT trigger the listbox's CLICK event for me so the combobox isn't populated so I can then make that selection from Screen #1, also. I've tried setting focus to listbox first, then making selection, but that doesn't work.
QUESTION: Is there code that selects from a listbox in a way that mimics the user clicking the selected item in the listbox?
The alternatives I can think of are:
1) Change Screen #2's listbox code from CLICK to CHANGE event, but I'd rather not.
2) Move CLICK event code to sub-procedure and then call from both listbox CLICK and Screen #2 code
3) Some sendkey string like ENTER?
Would be easier to just mimic the user click, if possible.
With frm_Screen2
'Select item type from listbox
With .LBox_Items
[Code].....
View 7 Replies
View Related
Jun 1, 2009
My question is about removing items from a ComboBox. I've created a ComboBox with an array of items as follows:
View 2 Replies
View Related
Jul 31, 2013
I am trying to add a list of items to a combo box which is in a user form using vba. Find the file as attached. My code is as follows: when i double click on the combo box it opens editor.( 4th item: Frequency )
Private Sub ComboBox1_Change()
With .ComboBox1
.AddItem "Y"
.AddItem "M"
.AddItem "D"
End With
End Sub
View 4 Replies
View Related
Apr 15, 2009
I have userform with a combobox that fills up with data when the userform is opened. One of the enteries in this combobox is "Test"
I want to hide/delete this from the combobox.
View 9 Replies
View Related
Jan 15, 2007
I want to add combobox to my sheet in vba code, then I hope I can add some items to this combobox.
I knew how to add combobox to sheet, but I couldn't find any information about how to add item to that combobox,
View 9 Replies
View Related
Nov 18, 2013
I'm trying to add items to a Combobox on a Userform dynamically when the form loads - the criteria is if a cell value is greater than zero, the value being calculated by a formula within the cell.
Code:
If Sheet5.Range("B58").Text >= "0" Then
.AddItem "Target"
End If
View 5 Replies
View Related
Mar 20, 2014
I have a userform called "Description_Form". I had a listbox on this which worked 100%. I then decided to replace the listbox with a combobox. I replaced the word listbox1 with combobox1 in teh code below and now I am getting an error message:
Run-time error '-2147352573 (800200003)':
Could not fine the specified object.
I have checked the name of the Combobox and it is definitely combobox1.
Sub PopulateListWithHorizontalRange(New_Dest As Variant)
Dim x As Range
Description_Form.ComboBox1.Clear
For Each x In Range("S_DESTINATIONS").Cells
'here is where I get the error message
Description_Form.ComboBox1.AddItem x.Value
[Code] .........
View 3 Replies
View Related
Oct 19, 2006
is there any way to get the value for the selected item from the combo box in vba code?
View 5 Replies
View Related
Dec 28, 2006
I have, 10 combobox, if the user makes click in the combo,start the event combobox1_change, and the value of the combobox is searching in excel, when find it, move one cell toward the cell of the left, and the value of the cell of the left is shown in a label, that work.
But I need copy teen time the same code? (My english is very bad)
this is the
Private Sub ComboBox2_Change()
If Sheets.Application <> "Materiales" Then
Sheets("Materiales").Select
End If
Range("H:H").Select
Cells.Find(What:=ComboBox2.Value, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByColumns, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
View 3 Replies
View Related
Jul 27, 2007
I have a userform which manipulates data based on the userselection from the combo box. I have setup the userform so that the user may select up to 3 sheets due to the presence of 3 combos boxes. I need to writing an IF statement which checks to see if combobox1 is occupied to carry out a function, followed by it checking to see if combobox2 is occupied to carry out the function, and then checks to see if combobox3 is occupied and carries out the funciton.
As such, if only 1 combo box is occupied it would then only carry out the operation on combobox1's selection, and if none are occupied, nothing occurs, the box simply stays open. This is what I have so far, I know there is probably a more eligant way of writing such a If/Then/Else statement
Sub Start()
If UserForm1.ComboBox1.Value And UserForm1.ComboBox2.Value > 0 Then
Call Find1
Call kTest1
End If
If UserForm1.ComboBox3.Value And UserForm1.ComboBox4 > 0 Then
Call Find2
Call kTest2
End If................
View 3 Replies
View Related
Feb 15, 2008
The ideal is I have a list which the use fills in, for sack of argument Goal 1, Goal 2, etc but I have a problem. This list which the user builds I want to appear in a combobox with is quite easy using the list function and naming the range.
The problem I have is that Goal 1 or 2 can be in this list more than once, if it is at all possible I want or would like the Combobox to only show Goal 1 once and not twice or how many times it occurs. I require the Combobox just to show all Goals once no matter how many time they occur.
View 3 Replies
View Related
Mar 17, 2008
How do I check the information from a user selection of all comboboxes on a multi-page control to format a worksheet?
A few more specifics: There are roughly forty comboboxes on a multipage with six tabs. The comboboxes contain a list of choices for how different aspects of the project are financed. I want to check for whether the user has selected a specific entry. If any of the forty comboboxes have made that selection, some code runs that formats the column of the worksheet in a specific way. I have written the code which formats the column, and it works fine, but my attempts to run the check mentioned above, have not worked. The code cannot check based on .listitem, it must check based on a specific string.
A few more clarifications: It doesn't matter whether all forty comboboxes have this selection, or one; if any of them have the selection, the code needs to recognize this. The code would currently run off a command button which performs a series of calculations, tests, and then runs the code to format the worksheet.
View 8 Replies
View Related
May 15, 2008
I have two comboboxs on a userform, both are populated like this:
(ComboBox1 is a different sheet/column)
' Sets Remarks in ComboBox4 Contents
With Worksheets("Data")
Set rng = . Range(.Cells(1, "C"), .Cells(Rows.Count, "C").End(xlUp))
End With
With ComboBox4
.RowSource = rng.Address(external:=True)
End With
The function is that ComboBox1 will populate the names on lets say Sheet1, Column A, and when selected will populate by offset all the other Textboxs, and ComboBoxs.
Textbox1 is a date
ComboBox4 is populated off of items from the data sheet
ComboBox1 is populated off of sheet1 and provides names, then fills the userform fields
In populating the Userform, it fills Combobox4.value by the offset value of the selected name.
That cell does not contain the same info that was loaded into the ComboBox initally, and it does not show it. All other ComboBox entries match preloaded values, and show.
How do I get the ComboBox to display what is in the OffSet cell value, rather than blank because its different?
View 9 Replies
View Related
May 28, 2014
I have a Multipage with 3 pages in userform1, and I just want to add an item to the combobox in userform2 depends on the multipage that is active.
I have the below code but I'm getting an error 'Object doesn't support this propert or method'
Commandbutton in Userform1
[Code] ......
View 1 Replies
View Related
Jul 5, 2014
I've created and coded a vba userform that creates purchase orders for my projects. The user begins by selecting the project code from the combobox (the project code is a unique identifier of each project). Once the purchase order is created, the information is logged in a separate sheet called "POLog" and the userform is cleared. The project code is saved in the first column of the "POLog".
My problem is that when I have more than one purchase order to create for the same project (sometimes I have 20 or 30), the combobox starts out empty and I have to manually select the project code from the combobox. Is there a way to allow the userform to recall the last project code that was used? Maybe recalling it from the last row in the "POLog" sheet?
View 7 Replies
View Related
Mar 5, 2007
Its a phone number directory. the data is retrived based on nickname. when a nickname is selected, its phone number and details will be updated in the textboxes ... example: tony (in A2) is selected from the combobox, his phone number (in B2) and details (in C2) are updated in the textboxes.
View 2 Replies
View Related
Sep 8, 2006
Not overly familiar with ComboBoxes but what I want to do is load a ComboBox with data based upon the selection of another ComboBox
Please see attached example.
ComboBox1 - I can get to load.
ComboBox2 - I want to load but only those lines that match the above selection
TextBox - Load with the data on row selected by ComboBox2
View 9 Replies
View Related
Nov 28, 2006
I have a sheet with several entries. I want to find a way to have the user go to a specific cell instantly. What I thought I'd try was a combobox that when I click on a name in the combobox. It will make the matching name from the list the active cell.
View 9 Replies
View Related
