I'm trying to add items to a Combobox on a Userform dynamically when the form loads - the criteria is if a cell value is greater than zero, the value being calculated by a formula within the cell.
Code:
If Sheet5.Range("B58").Text >= "0" Then
.AddItem "Target"
End If
I am getting close to finishing the drop down menu capability when filling in column L in tab Transactions. However, there is a snag. When I enter part of account say "fin" (the important part here is that the part of the word should not be the beginning of the account name) - then I select an account from the menu - but it does not stay in the cell if the part of the name is the beginning of the account name - all is fine.
View 4 Replies View RelatedMy question is about removing items from a ComboBox. I've created a ComboBox with an array of items as follows:
View 2 Replies View RelatedI am trying to add a list of items to a combo box which is in a user form using vba. Find the file as attached. My code is as follows: when i double click on the combo box it opens editor.( 4th item: Frequency )
Private Sub ComboBox1_Change()
With .ComboBox1
.AddItem "Y"
.AddItem "M"
.AddItem "D"
End With
End Sub
I have userform with a combobox that fills up with data when the userform is opened. One of the enteries in this combobox is "Test"
I want to hide/delete this from the combobox.
I want to add combobox to my sheet in vba code, then I hope I can add some items to this combobox.
I knew how to add combobox to sheet, but I couldn't find any information about how to add item to that combobox,
I have a userform called "Description_Form". I had a listbox on this which worked 100%. I then decided to replace the listbox with a combobox. I replaced the word listbox1 with combobox1 in teh code below and now I am getting an error message:
Run-time error '-2147352573 (800200003)':
Could not fine the specified object.
I have checked the name of the Combobox and it is definitely combobox1.
Sub PopulateListWithHorizontalRange(New_Dest As Variant)
Dim x As Range
Description_Form.ComboBox1.Clear
For Each x In Range("S_DESTINATIONS").Cells
'here is where I get the error message
Description_Form.ComboBox1.AddItem x.Value
[Code] .........
is there any way to get the value for the selected item from the combo box in vba code?
View 5 Replies View RelatedI have, 10 combobox, if the user makes click in the combo,start the event combobox1_change, and the value of the combobox is searching in excel, when find it, move one cell toward the cell of the left, and the value of the cell of the left is shown in a label, that work.
But I need copy teen time the same code? (My english is very bad)
this is the
Private Sub ComboBox2_Change()
If Sheets.Application <> "Materiales" Then
Sheets("Materiales").Select
End If
Range("H:H").Select
Cells.Find(What:=ComboBox2.Value, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByColumns, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
I have a userform which manipulates data based on the userselection from the combo box. I have setup the userform so that the user may select up to 3 sheets due to the presence of 3 combos boxes. I need to writing an IF statement which checks to see if combobox1 is occupied to carry out a function, followed by it checking to see if combobox2 is occupied to carry out the function, and then checks to see if combobox3 is occupied and carries out the funciton.
As such, if only 1 combo box is occupied it would then only carry out the operation on combobox1's selection, and if none are occupied, nothing occurs, the box simply stays open. This is what I have so far, I know there is probably a more eligant way of writing such a If/Then/Else statement
Sub Start()
If UserForm1.ComboBox1.Value And UserForm1.ComboBox2.Value > 0 Then
Call Find1
Call kTest1
End If
If UserForm1.ComboBox3.Value And UserForm1.ComboBox4 > 0 Then
Call Find2
Call kTest2
End If................
The ideal is I have a list which the use fills in, for sack of argument Goal 1, Goal 2, etc but I have a problem. This list which the user builds I want to appear in a combobox with is quite easy using the list function and naming the range.
The problem I have is that Goal 1 or 2 can be in this list more than once, if it is at all possible I want or would like the Combobox to only show Goal 1 once and not twice or how many times it occurs. I require the Combobox just to show all Goals once no matter how many time they occur.
How do I check the information from a user selection of all comboboxes on a multi-page control to format a worksheet?
A few more specifics: There are roughly forty comboboxes on a multipage with six tabs. The comboboxes contain a list of choices for how different aspects of the project are financed. I want to check for whether the user has selected a specific entry. If any of the forty comboboxes have made that selection, some code runs that formats the column of the worksheet in a specific way. I have written the code which formats the column, and it works fine, but my attempts to run the check mentioned above, have not worked. The code cannot check based on .listitem, it must check based on a specific string.
A few more clarifications: It doesn't matter whether all forty comboboxes have this selection, or one; if any of them have the selection, the code needs to recognize this. The code would currently run off a command button which performs a series of calculations, tests, and then runs the code to format the worksheet.
I have two comboboxs on a userform, both are populated like this:
(ComboBox1 is a different sheet/column)
' Sets Remarks in ComboBox4 Contents
With Worksheets("Data")
Set rng = . Range(.Cells(1, "C"), .Cells(Rows.Count, "C").End(xlUp))
End With
With ComboBox4
.RowSource = rng.Address(external:=True)
End With
The function is that ComboBox1 will populate the names on lets say Sheet1, Column A, and when selected will populate by offset all the other Textboxs, and ComboBoxs.
Textbox1 is a date
ComboBox4 is populated off of items from the data sheet
ComboBox1 is populated off of sheet1 and provides names, then fills the userform fields
In populating the Userform, it fills Combobox4.value by the offset value of the selected name.
That cell does not contain the same info that was loaded into the ComboBox initally, and it does not show it. All other ComboBox entries match preloaded values, and show.
How do I get the ComboBox to display what is in the OffSet cell value, rather than blank because its different?
I have a Multipage with 3 pages in userform1, and I just want to add an item to the combobox in userform2 depends on the multipage that is active.
I have the below code but I'm getting an error 'Object doesn't support this propert or method'
Commandbutton in Userform1
[Code] ......
I've created and coded a vba userform that creates purchase orders for my projects. The user begins by selecting the project code from the combobox (the project code is a unique identifier of each project). Once the purchase order is created, the information is logged in a separate sheet called "POLog" and the userform is cleared. The project code is saved in the first column of the "POLog".
My problem is that when I have more than one purchase order to create for the same project (sometimes I have 20 or 30), the combobox starts out empty and I have to manually select the project code from the combobox. Is there a way to allow the userform to recall the last project code that was used? Maybe recalling it from the last row in the "POLog" sheet?
Its a phone number directory. the data is retrived based on nickname. when a nickname is selected, its phone number and details will be updated in the textboxes ... example: tony (in A2) is selected from the combobox, his phone number (in B2) and details (in C2) are updated in the textboxes.
View 2 Replies View RelatedNot overly familiar with ComboBoxes but what I want to do is load a ComboBox with data based upon the selection of another ComboBox
Please see attached example.
ComboBox1 - I can get to load.
ComboBox2 - I want to load but only those lines that match the above selection
TextBox - Load with the data on row selected by ComboBox2
I have a sheet with several entries. I want to find a way to have the user go to a specific cell instantly. What I thought I'd try was a combobox that when I click on a name in the combobox. It will make the matching name from the list the active cell.
View 9 Replies View RelatedIs it possible to have a combo box in excel, where, when an item is selected, it is assigned a colour depending on which item it is? Eg, The combo box list has item 1, and item 2. If I select item1, then the text becomes red, if I select item 2, the text becomes blue. If not possible using combo box, what method can I use?
View 2 Replies View RelatedI have a dynanic range named Room on B1. My combobox1 rowsource is linked to the Dynamic range Room. I would like to be able to delete the the specified selected room from the combobox and the next 3 column C,D,E (delete Shift cells up)
View 2 Replies View RelatedI have a series of integer constants defined for the column offset to be applied based on the category selected by the user; there are 16 in total.
e.g.
Const Transfer_Offset As Integer = 19
Using concatenate and replace i have a variable named Column_Offset that = the string value of constant variables defined.
e.g. Column_Offset would contain the value Transfer_Offset
what I ams struggling to do, is to get the variable Column_Offset to contain the value of Transfer_Offset i.e 19
Ultimately this value would then be used in an activecell.offset(0, Column_Offset) to move the cell address to the required.
At present, using the above code gives me an error as VBA only goes down one level in the tier of variables and thus tries to offset the active cell by Transfer_Offset, not 19 columns as required.
I have a combobox which is manually scrolled through using the down arrow key. As the different combobox items are viewed, I would like to be able to delete the currently viewed item from the list if desired by clicking on a commandbutton.
The list items are contained in the range of B2:B500. Also, since this places a gap in the list, I would like to shift the remaining cells values in column B up to close the gap.
I have a spread sheet for equipment that gets loaned out on a regular basis. Cells B4 - B25 have combo boxes in them, with the options to select "On Loan", "In Stock Room" etc in them. What I would like to do is create something so that as the combo box is changed, i.e. from "In Stock" to "On Loan", a date changes adjacent to each combo box.
For example, combo box in B10 has been changed from "In Stock" to "On Loan". The adjacent cell records the date automatically that the combo box was changed.
Combo box date example.jpg
I have a list of employees that can be assigned to tasks, the list is large enough that I cannot remember who is assigned to what.
All the employees assigned major tasks are automatically filtered out but these are employees with administrative tasks that should only be assigned as a last resort. I would like to assign the employees with administrative tasks a gray, italic, strike-out or some other font to indicate that they are different.
I assume this is done during the Add Item process...
Basically I have three sheets. MAIN, Sheet 1 and Sheet 2
Sheet 1 and 2 are in the same format
A3 down is a list of country names and then B3:I71 contains the data im interested in.
I've been trying to create a function that looks at B3:i71 to see if any cell in that range contains a value greater then $0.00. If it does then the row that contains the cell with a value greater then $0.00 (between col A to K) should be copied to sheet MAIN from cells B3 down. This should ultimatley produce a list of data for any row containing a value greater then $0.00. This process should then be repeated on Sheet 2 and should join the list below sheet 1.
I want to find the minimum time value within a range of cells, excluding 0:00. Currently,
VB:
=MIN(BL5:CP5)
returns 0:00 if it exists in any of the cells.
I have a column of percentages, and need to highlight the smallest value that is greater than 80%. This report is updated daily. I would like to know how to set conditional formatting to do this, or at least have a formula or run a macro to do this.
View 4 Replies View RelatedI want to find the minimum time value within a range of cells, excluding 0:00. Currently, =MIN(BL5:CP5). returns 0:00 if it exists in any of the cells.
View 2 Replies View RelatedI am trying the sumproduct funtion,but getting #value error.I only want to sum up values greater than zero,omiting blanks,formulas
View 9 Replies View RelatedI have two ranges that show parts of a question to be answered and those parts already answered (aa6:aa55 and ab6:ab55). I would like to count those elements where the value in column AA is greater than the corresponding value in column AB, showing questions with parts still to be answered. Currently I have a formula comparing the two and am counting the occurrences of true or false. This seems to be overkill and I am sure that there is an array formula that can do the same thing more efficiently, unfortunately I cannot figure it out.
View 5 Replies View Related