Not overly familiar with ComboBoxes but what I want to do is load a ComboBox with data based upon the selection of another ComboBox
Please see attached example.
ComboBox1 - I can get to load.
ComboBox2 - I want to load but only those lines that match the above selection
TextBox - Load with the data on row selected by ComboBox2
I have two comboboxs on a userform, both are populated like this:
(ComboBox1 is a different sheet/column)
' Sets Remarks in ComboBox4 Contents
With Worksheets("Data")
Set rng = . Range(.Cells(1, "C"), .Cells(Rows.Count, "C").End(xlUp))
End With
With ComboBox4
.RowSource = rng.Address(external:=True)
End With
The function is that ComboBox1 will populate the names on lets say Sheet1, Column A, and when selected will populate by offset all the other Textboxs, and ComboBoxs.
Textbox1 is a date
ComboBox4 is populated off of items from the data sheet
ComboBox1 is populated off of sheet1 and provides names, then fills the userform fields
In populating the Userform, it fills Combobox4.value by the offset value of the selected name.
That cell does not contain the same info that was loaded into the ComboBox initally, and it does not show it. All other ComboBox entries match preloaded values, and show.
How do I get the ComboBox to display what is in the OffSet cell value, rather than blank because its different?
Is it possible to have a combo box in excel, where, when an item is selected, it is assigned a colour depending on which item it is? Eg, The combo box list has item 1, and item 2. If I select item1, then the text becomes red, if I select item 2, the text becomes blue. If not possible using combo box, what method can I use?
View 2 Replies View RelatedI have, 10 combobox, if the user makes click in the combo,start the event combobox1_change, and the value of the combobox is searching in excel, when find it, move one cell toward the cell of the left, and the value of the cell of the left is shown in a label, that work.
But I need copy teen time the same code? (My english is very bad)
this is the
Private Sub ComboBox2_Change()
If Sheets.Application <> "Materiales" Then
Sheets("Materiales").Select
End If
Range("H:H").Select
Cells.Find(What:=ComboBox2.Value, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByColumns, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
I have a userform which manipulates data based on the userselection from the combo box. I have setup the userform so that the user may select up to 3 sheets due to the presence of 3 combos boxes. I need to writing an IF statement which checks to see if combobox1 is occupied to carry out a function, followed by it checking to see if combobox2 is occupied to carry out the function, and then checks to see if combobox3 is occupied and carries out the funciton.
As such, if only 1 combo box is occupied it would then only carry out the operation on combobox1's selection, and if none are occupied, nothing occurs, the box simply stays open. This is what I have so far, I know there is probably a more eligant way of writing such a If/Then/Else statement
Sub Start()
If UserForm1.ComboBox1.Value And UserForm1.ComboBox2.Value > 0 Then
Call Find1
Call kTest1
End If
If UserForm1.ComboBox3.Value And UserForm1.ComboBox4 > 0 Then
Call Find2
Call kTest2
End If................
How do I check the information from a user selection of all comboboxes on a multi-page control to format a worksheet?
A few more specifics: There are roughly forty comboboxes on a multipage with six tabs. The comboboxes contain a list of choices for how different aspects of the project are financed. I want to check for whether the user has selected a specific entry. If any of the forty comboboxes have made that selection, some code runs that formats the column of the worksheet in a specific way. I have written the code which formats the column, and it works fine, but my attempts to run the check mentioned above, have not worked. The code cannot check based on .listitem, it must check based on a specific string.
A few more clarifications: It doesn't matter whether all forty comboboxes have this selection, or one; if any of them have the selection, the code needs to recognize this. The code would currently run off a command button which performs a series of calculations, tests, and then runs the code to format the worksheet.
I have a sheet with several entries. I want to find a way to have the user go to a specific cell instantly. What I thought I'd try was a combobox that when I click on a name in the combobox. It will make the matching name from the list the active cell.
View 9 Replies View RelatedI have a dynanic range named Room on B1. My combobox1 rowsource is linked to the Dynamic range Room. I would like to be able to delete the the specified selected room from the combobox and the next 3 column C,D,E (delete Shift cells up)
View 2 Replies View RelatedThe ideal is I have a list which the use fills in, for sack of argument Goal 1, Goal 2, etc but I have a problem. This list which the user builds I want to appear in a combobox with is quite easy using the list function and naming the range.
The problem I have is that Goal 1 or 2 can be in this list more than once, if it is at all possible I want or would like the Combobox to only show Goal 1 once and not twice or how many times it occurs. I require the Combobox just to show all Goals once no matter how many time they occur.
My attached files contains stock returns for companies. Each sheet contains the returns over a 5 year period for a certain stock, with the ticker symbol of the stock used as the sheet name. I want to write a sub that presents the user with a user form. This user form should have an OK and Cancel buttons, and it should have a list box with a list of all stocks. The user should be allowed to choose only one stock in the list. The sub should then display a message box that reports the average monthly return for the selected stock.
View 4 Replies View RelatedI have a set of data on excel and would like to make searching for it easier.
I have created a drop down list in cell B4 (say, "Banana", "Apples" and "Orange"). Is there a way that if i select "Banana" in cell B4, excel will automatically go to cell A20 ?
I am hoping to create a drop down list of months in one sheet, and when I select a certain month, columns in about 10 other worksheets in the same workbook will either hide or unhide columns...
The spreadsheet is laid out with columns (C-N) for each month in the year, for actuals, then columns for budget and budget variance (O-P), then YTD Actual, YTD Budget and YTD Variance. When I select September, for example, I want October-December to hide, and leave Jan-Sep unhidden, while keeping the budget, YTD and variance columns.
Is there a VBA code that can achieve this?
I am trying to use combo box to display my data, here are the details. I am having 20 Departments, and have Budget and Actual values for those Departments for each month for the year 2008, tell me the logic to use combo box as dropdown list for Dept. and how can i get values in first 5 to 10 rows after changing the Department in Dropdown list(Combo Box)
View 5 Replies View Relatedcompare one coloum with another and return a corresponding value in the adjacent cell. For example
I have 4 colums A,B,C,D. In "column A" I enter Products names (Example- Apple, Orange..)and in corresponding Coloumn B, I enter Product Codes (01 for Apple and 02 for Orange etc..) When I enter Apple in coloumn C for 10 rows (C1 thru C10), I need to get Code 01 in Column D in all rows (D1 thru D10)
I want to dynamically list items in combobox placed in excel sheet. I have a list of 10 values in a column in excel sheet. I have placed two comboboxes in the same sheet. Now depending on the first combobox selected value i want to list either all or only few values from the available 10 values.
View 4 Replies View RelatedI am getting close to finishing the drop down menu capability when filling in column L in tab Transactions. However, there is a snag. When I enter part of account say "fin" (the important part here is that the part of the word should not be the beginning of the account name) - then I select an account from the menu - but it does not stay in the cell if the part of the name is the beginning of the account name - all is fine.
View 4 Replies View Related[URL]
I had this posted in Formulas and functions
There is a small command button in cell A11 that brings up the userform. I have a multi-tab user form the userform contains a number of combo boxes with an associated textbox right of each. I would like to populate the textbox based on the value selected in the combo box. For example when Ice Foot is selected (Type of Fast Ice) populate the textbox (txtFastIceEncoded) with the value of 6. These values are located on 'decode' sheet. I then want to take the four values and place them in the textbox 'txt_Tw_Tw_Et_DE_ai_group'. Ultimately I want the values to end up back in the worksheet 'Synoptic Ice Obs'. Perhaps there is a better way to do this than I am trying. I have poured through countless threads in this forum and have tried a number of these. I however always seems to run into some problem that I do not understand fully. I have included a copy of the workbook.
View 4 Replies View RelatedI have a list of country names in a listbox that are populated using another worksheet that has these country names. When I make a selection in the listbox, I want the same country names to be highlighted in the worksheet. I will then be able to run a macro that takes those selected cells as input.
View 3 Replies View RelatedI'm trying to make a budget type spreadsheet for a club I run. I have a popup box where I click what was purchased, and now I want a drop down list of all the members of the club so that when I choose one name it is inputed beside what was purchased (I hope this makes sense !). I've managed to make a dropdown list in a dialog box but I don't know how to make it so that the name I choose is inputted into the spreadsheet.
View 2 Replies View RelatedLet's say I have pivot data in the form of:
| Major Category | Minor Category |
toys | balls |
toys | puzzles |
toys | blocks |
clothes | shirts |
clothes | pants |
I want to loop through every minor category and display it and its major_category on a different worksheet. (I'm doing more than this, but for simplicity sake ...
I have a user form with a group of several option buttons. When an optionbutton is selected, programatically, I want a worksheet's named column to be parsed through to find unique entries and then have those entries passed to the form's combobox. I've spent the last hour searching for an answer but to no success
View 3 Replies View RelatedI use the code below to enter a value from a list box in a cell on a workssheet. Is it possible to code VBA to enter a number for the position of the selection in the listbox to a cell in a worksheet rather that the actual value from the list box. For example if my list is:
Option1
Option2
Option3
And I click on Option2 in the list, I can sennd the value 2 to a cell on the worksheet rather that the value "Option2' from the list.
Private Sub ListBox1_Click()
Sheets("SA").Range("SA_Poistion_To_Archive_A_New").Value = ListBox1
End Sub
I need to go to named cells in a workbook based on a selection in a combobox - I just can't seem to work out the coding -
View 4 Replies View RelatedI've created drop down box using VBA code. Data for drop down box is on the Sheet2 and drop down box created on Sheet1. Need code I have to use to copy selected value from box to any cell on Sheet1 (i.e. Sheet1.A5). Here is my
Private Sub Workbook_Open()
CreateMyBox
End Sub
Sub CreateMyBox()
Dim MyBox As Excel.Shape
With ActiveSheet
Set MyBox = .Shapes.AddFormControl(xlDropDown, 5, 17, 175, 15)
End With
With MyBox
.Name = "MyBox"
.Fill.ForeColor.RGB = RGB(255, 0, 0)..................
I am trying to find a formula that references a cell on a spreadsheet (H7) which is really a Combo Box that is located on a range of cells K25:K30. I want to put a formula in H18, but of course, the combo box always references the range on K. i have tried the $K$25:K430, but i don't know what i am doing. The drop down menu and everything works fine, but the data IS stored elsewhere. HOW do i tell Excel to look at K25:K30,(depending on choice within combo) and then ad H8:H19? I have looked, but all answers are for forms. I am doing this for final exercise for a university course, and (hmmhmm) must folllow obtuse instructions.
View 7 Replies View RelatedI have a combo box, which is used after a search. The box only identifies a list of cells, but to the right of that, is somemore info that i need.
I would like it, so when you bring down the list window, and pick from the list, it knows which Address it is, so it can then HLOOKUP the information in the next column.
I can't seem to make it happen. I either cannot get it to let me know the Address of the cell I had choosen, or I cannot make it look to the right, and put the contents into another text box...
I have something like this:
Addresslist.plant = addrlist.offset(,5).value
how do i make it find the location ie $D$5 of the of item i selected from a combo box?
Right now I am constructing a macro so that upon exection, the user will be forced to select one of the dropdown menu options which are listed in a dynamic array. The dropdown menu should be in a popup of somekind created by the macro and not on any of the worksheets or charts. I would like to then assign the choice that the user makes to a variant. I have searched the web but not found what I am looking for and was hoping that someone could give me some phydocode that I can look at.
The restrictions that I am operating by do not allow me to place a combobox upon any of the worksheets which is what I find in all the examples posted online.
I'm trying to build a Userform with a combo box that is populated by a row of data, this will allow the user to select the column of data. What i want to do is find out the address of the data that is selected so I can work with.
ie
A1 = Apple
B1 = Orange
C1 = Grape
if the user selects "Grape" I want to find out the column that it is in. Also the Row of data is Dynamic so I need to re-check the range each time.
Sub ComboBox1_Chg()
For Each Sheet In Worksheets
If Sheet. Name <> "CoverPage" And Sheet.Name <> Sheets("CoverPage").ComboBox1 Then
Sheet.Visible = False
Else: Sheet.Visible = True
End If
Next Sheet
End Sub
It works if I step through it (F8) but the ComboBox doesn't work. It's named ComboBox1, and in the properties the ListFillRange shows all of the names in the list in the ComboBox correctly.