I have a file with a macro that I want to delete after it has completely run. Is there a code in VBA that does this? I have tried to record a macro that deletes a macro, but the resulting macro is blank.
View 2 RepliesI have a couple of macros in the book that plug through a list of "stores", input the store number in a cell, then copy the results to a new workbook, value out the formulas, and save it, before moving onto the next store. There are also 2 types of stores, "STORES" and "CORPORATE", and the sheet toggles some things based on this input. One of those things is a "ON CHANGE" macro that hides and unhides rows appropriately. Everything works in my Master sheet, but the problem is that once I copy the page (and the macro embedded) to a new workbook, I save to a lower version of Excel and it all gets hung up on the embedded macro.
Is there a way to disable/delete the macro once it goes to the new book? I've tried "Application.EnableEvents = False" and i think this is the right route, but i think maybe i'm placing it in the wrong place(s).
Here;s my code:
Code:
Sub CREATE_REPORT()
'
' PY12 Macro
[Code]....
I am trying to write a macro that takes the value in cell B2 from a workbook called ""numbers" in a worksheet called "summary," and creates a new worksheet in a workbook called "filestransfer" that is named the same thing as the value in cell B2 from "numbers." That part is done.
View 2 Replies View RelatedI want to delete every second row, because I have data with 0.25m interval and I want 0.5m interval. Why I try the following it doesn't work?
View 2 Replies View RelatedI need a simple macro to delete all sheets in a workbook except one that is called "START"
View 9 Replies View RelatedI'm looking for a macro that will delete a row with a certain value (0.00) and the row below it.
View 9 Replies View RelatedSo I have a macro that creates a monthly set of reports, but some of them only relate to period 5 onwards. I wanted the macro to check whether a folder exists for periods 1 to 4, and if so, delete the folder and all the files inside it. I've used the following...
Code:
If Period < 5 Then
If Dir("I:AcctsCentral EngineeringEngineering Reporting Pack2012-131 April 20122-2 Reports - 4+8 Reforecast") "" Then Kill "I:AcctsCentral EngineeringEngineering Reporting Pack2012-131 April 20122-2 Reports - 4+8 Reforecast[code]....
but the macro just skips straight through the secondary IF statements without stopping.
I know this works on deleting files, and presumed it did too for folders, but it doesn;t.
I'm trying to delete both rows of the same data not just one.
item
warehouse
location
PANT
7050
2
A1-05-89
PANT
5051
2
B1-19-19
SHIRT
7050
2
J1-08-67
SHIRT
7051
2
J1-08-67
What i need is if there is a same location delete both rows and i cant figure it out to get it to do both of them not just one row.
I have a problem with the following macro:
Code:
Sub CalcsDelete()
Dim count As Integer
count = 1
For count = 1 To 100
ActiveSheet.Shapes.Range(Array("Picture " & count)).Select
Selection.Delete
count = count + 1
Next count
End Sub
It should simply delete picture 1, picture 2, picture 3, picture 4, etc. The problem lies within the "Picture " & count part.
This is obviously the name of the picture, i.e. picture 1, picture 2, etc.
That's what I tried to accomplish with the for-loop, but I'm not sure how to increment the number of the picture by means of using a for-loop and having that be the new name for the picture.
how to remove a macro button from the sheet after we've used its functions.
For example, i have a macro that emails the workbook. Once the emailed workbook is out, i would like the macro button to be removed after we press it.
I am looking to find and delete email addresses in this case *@aol.com. I have only one column which is full of email addresses, I just want to delete all of the @aol.com ones in this case. This is the macro I am trying to use, but it does not work.
For Each cell In Range(Range("a2"), Range("a65536").End(xlUp))
If cell = "*@aol" Then
Range(cell, Cells(1, Rows.Count)).EntireRow.Delete
Exit For
End If
Next cell
I am dealing with data sets from various instruments that have different sample rates. I am deleting data points I don't need from some of the sets with higher sample rates so that all the data is on the same time scale.
The macro I have is super simple, but incredibly slow. I'm simply deleting every other cell down a column.
VB:
Sub OATcondense()
Application.ScreenUpdating = False
Do While ActiveCell <> ""
ActiveCell.Offset(1, 0).Delete Shift:=xlUp
ActiveCell.Offset(1, 0).Select
Loop
Application.ScreenUpdating = True
End Sub
I want a macro which can detect empty cell in rows and can delete whole row in which that empty cell is .and want to shift rows up. Macro should start searching empty cells from Column B meaning that It should not delete cells in Column A.
And I want this function in all sheets except parent sheet at position 1.
File is attached : inquiry 3.xlsx
I have another report which needs to be sorted using a macro. However, before I can sort the data, I need to delete rows at the bottom of each report that have "0" values in column A and B. Again, each report I run is of different length so I need to write a code that will take that into consideration. Here is an example of what I need to do:
Sub second_step()
'
' second_step Macro
'
'
Range("C1").Select
Range(Selection, Selection.End(xlDown)).Select
Rows("7876:7876").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.ClearContents
Range("A1").Select
End Sub
Now, the thing is, not every report will start having "0" values in row 7876. How do I write a code to reflect this?
I want to delete all series which are in graphs. is there any way so that i can pull total number of series in VB from graph, and then just do all the series one by one.
View 2 Replies View RelatedI have an issue with trying to write a macro to apply a filter and then delete all lines.
Within the macro I copy and paste one sheet to a new one, and Paste Special Values over all formulas, leaving me with a column that has some figures and some "#N/A".
i.e.
13.75
12.00
#N/A
14.00
So I need to do something in the macro that then applies a filter on this column and deletes off all the #n/a results.
This table has a number of columns not just this one so it is the full rows that need removing.
I see on other posts that using a range.specialcells clause could work, but i'm not too sure exactly on how to apply this.
I've a file with lots of data. In that file I've some blank rows, I want a code which search complete blank row and delete.
View 2 Replies View RelatedI want to write a macro that would delete the rows if the sum equal to zero and the description is identical. For example:
Column a: Column b:
100 Apple
200. Apple
300. Grape
-100. Apple
-200. Apple
400. Cherry
-400. Cherry
The answer should be 300 grape.
I am looking for code to put in a macro that will go through a tab of data and delete the rows that have merged cells in them. The number of rows that there will be will never be a constant because the people using it will be pasted in information from another source, deleting the lines that have merged cells then run a macro with stuff that needs to be done to the info, but I would like to save them the step of delete the rows that have cells.I think it is Office 2013 I am using. I am not at that machine right now so I can't check.
View 4 Replies View RelatedSo I have data that I'm importing in rows 1,2 and 3. The first row has the product type, then rows 2 and 3 have additional info pertaining to that product. I was wondering how I would write a macro that could identify entries in the first row that equal a particular product, and remove those cells, along with its respective info in rows 2 and 3. Ideally, I could just push a button, and a particular product along with all it's info would disappear from my imported table.
View 4 Replies View RelatedSub Delete()
Dim x As Long
For x = 28 To 8 Step -1
If Range("b" & x) = "" Then _
Range("b" & x).EntireRow.Delete
Next x
End Sub
I am trying to delete all data between two ranges by Macro.
Range one is called Title and range two is called disclaimer.
I simply want to delete all data between them and insert new data ( again between them)
The deleted and inserted will always be of varying sizes.
All data sits in columns "A:H"
I am able create a macro using the find function to find the next blank row, but I would like to have it select a range of rows down that I can then delete. Each time I run the macro the next blank row may be different thant the last, so it can't be a set number of row numbers each time. I could also possibly use the print area function if it would be easier.
Here is what I have so far, what is in red is where I need it to vary from next active blank row down to R2001C14, and then delete all the active blank rows ...
I have a question for you that can be much helpful for me. I prepared a macro which is collecting many datas from different pages and entering them on a sheet. Some lines of this sheet are with data and some are empty. I would like to write a code, which will delete the lines in which there is no data. But I would like the code to do this between line 5 and line 225.
View 9 Replies View RelatedI will paste data into columns A-H, I have headers in rows, 1,2 and 3. I have formulas in a few cells in row 2. After inputting my data on the sheet etc I copy all the formulas from row 2 and paste in teh relevant columns, I then select my autofilter and my selection (in this case #N/A), i then choose all visable cells (Alt and ;)and delete them. The problem is I do not want to delete rows 1,2 or 3 but all other rows (i.e. just the selected N/A rows). Can anyone help on how to do this?
Once i have figured this out I will then continue the macro to select 'all' on the filter and do the same to a few other columns.
So far I have this;
Sub Macro6()
'
' Macro6 Macro
' Macro recorded 24/03/2009 by Richard Tydeman
'
'
Selection.Copy
Range("I4:I5000").Select
ActiveSheet.Paste
Range("J2").Select
Application.CutCopyMode = False
Selection.Copy
I think the extra bit of code needs to go in after selecting visible cells - something that says exclude row1,2 and 3 but im not sure.
I want to delete a row in a spreadsheet by finding the row that contains a particular value. I use MATCH on spreadsheet #1 to identify the row number on spreadsheet #2 to delete. I need the macro to select the row number on spreadsheet #2 and delete it.
I don't know the syntax for the commands in VBA to write this and I'm coming to this forum for help because I'm too lazy to learn VBA. I've recorded macros to add rows, populate cells, hide sheets, etc. The following code is extracted from a macro I recorded to try to get started, and was hoping to be able to substitue a reference to sheet1 within the parentheses at
Rows("4:4").Select
but I can't make this work. The following is the code I was trying to adapt.
Sheets("Sheet2").Select
Rows("4:4").Select
Selection.Delete Shift:=xlUp
End Sub
I have a challenge for any macro wizard out there - this is something I really need and I'd be happy to reimburse whomever can help with an iTunes gift card or something.
I regularly receive a dataset such as the one you see here on the tab called 'Data comes in varying # of rows' (either link should work):
[url]
[url]
The dataset comes each time with a different number of rows, and what I need to do is combine all the 'Issue' and 'Issue Description' columns (there are 8 total) into just two columns.
I think this should be relatively easy for someone who has a better knowledge of macros by simply copying and pasting the data on top of itself (as I have done on the next tab called 'Want to change to this format'), and then simply deleting from the second section the 'Issue #1' and 'Issue #1 Description' columns, and shifting all the data left by two columns.
If you repeat this process for the third and fourth sections (for the third, you must delete 'Issue #1' and 'Issue #1 Description' and 'Issue #2' and 'Issue #2 Description' and shift the data left, while for the fourth you must delete Issues and Issue Descriptions 1 to 3 and shift the fourth Issue and Description to the left), you will end up with the columns A, B, C, and D as I have on the 'Want to change to this format' tab. (The extra columns after column D should all be deleted.)
Finally, the 3 extra header rows that are now at the top of the bottom three copied-and-pasted sections should all 3 be deleted.
I have a excel file with more than 10 sheets and every sheet has a title on its first three rows.
I want to delete first three rows in all sheets except parent sheet .
I have a excel file with more then 10 sheets..Some of the sheets contains this word in some random cells" #DIV/0! " I want a macro which can find it in every sheet except parent sheet and can remove it.
View 5 Replies View RelatedThe below code is supposed to delete data on the last sheet of the workbook HeadsetOutTimeMay.xls however for some reason it is deleting the data on HeadsetOutTime.xls What am I doing wrong?
View 8 Replies View Related