Is there a way to edit my database located on sheet 1 using the advanced filter (output) on sheet 2?
I have a gigantic database and I want to filter it down to the rows I need to edit.. so I used advanced filter to extract the rows I need on to another sheet. But if I edit the rows on sheet 2 how do I makes those changes reflect on sheet 1 (the full database)
I would like to only view (or otherwise mark) the highest value cells (in column g) for each category (column c),
View 3 Replies View RelatedIs there any way to use Advanced Filter placing the result (the filtered data) in another sheet ?
I have tried but with no success... An error message is displayed (something like "It's not possible copy filtered data from a sheet to another")...
What do I have to do to get it ???
the macro mentioned below has been assigned to a combo-box form. I have 2 different datasets in the same sheet, they have the same headers (but named differently, myhead and myhead1) and the same adv filter criteria range (named as "dcrit") is applicable to both datasets. So, if an item is selected from the combo-box, both the datasets should get filtered according to same criteria. how i can combine the 2 IF LOOPS mentioned in the code?
Sub myfilt()
Application. ScreenUpdating = False
If ActiveSheet.FilterMode Then ActiveSheet.ShowAllData
If Not (Range("indsignal")) Or Not (Range("countsignal")) Then
Range(Range("myhead"), Range("myhead").Offset(1, 0).End(xlDown)).AdvancedFilter _
Action:=xlFilterInPlace, CriteriaRange:=Range("dcrit"), Unique:=False
End If
If Not (Range("indsignal")) Or Not (Range("countsignal")) Then
Range(Range("myhead1"), Range("myhead1").Offset(1, 0).End(xlDown)).AdvancedFilter _
Action:=xlFilterInPlace, CriteriaRange:=Range("dcrit"), Unique:=False
End If
Application.CutCopyMode = False
Application.ScreenUpdating = True
End Sub
Is there any way to use Advanced Filter placing the result (the filtered data) in another sheet??? I have tried but with no success... An error message is displayed (something like "It's not possible copy filtered data from a sheet to another").
View 4 Replies View RelatedI found a great bit of Advanced Filter code that works great, and fixed a problem of clearing a cell breaking the filter.
But if I want to increase the criteria from 1 row to 2, so you can start to include And , Or operations, it breaks the filter. Even an attempt at a manual one fails, until you put the criteria range back down to one row, then it's fine again.
I've tried changing the Target Row to >2 but that didn't work. how to make the criteria range bigger, and no problems of breakage if you clear the cells? It makes for a very useful automated Advanced Filter.
Here's the code :
[Code] .....
Database = the named area of raw data.
DATA is the name of the raw data worksheet
The criteria range should be AZ1:BC3, but of course royally breaks it...
I have a database in Excel 2013 and now I want that when a value (a person's name) is entered in a cell. That then the database sort of filters the list for me, so it's still possible to make changes in the entries.
[URL]
Picture above to specify the search, which I would therefore like to edit
Dashboard_Action Pool Team 7.2.xlsm
I have been all morning working on a simplified version of the tutorial from YouTube: Create your own Excel Search Pt. 4. But came back later so only then that I can not change the data:?
What I have is a sheet that is copied periodically from some source sheet, and on this sheet is a table. This sheet is called "Onsite Checklist Template" and it's table is titled "Checklist". I also have another sheet called "Loggers and Initial Notes" which has a tabled titled "Record", and then finally a title sheet call "Proj Details".
To clear this intro up - The sheets, in their order, is: "Proj Details", "Loggers and Initial Notes", "Onsite Checklist Template". The tables: "Record" on "Loggers..." and "Checklist" on "Onsite..."
When the user wants to make a new site visit, he/she fills in the requested date and then selects a button on "Proj...". When this button is selected, it copies the table data on "Record" and puts it on "Checklist", then inserts a new worksheet tab, always in the 3rd position (the title is based on the site visit date in which the user entered), which is a copy of "Onsite...". Now we have another sheet with a table called "Checklist1", and upon another new site visit, there will be another worksheet with "Checklist2", and so on.
On the "Onsite..." worksheet, there is a button on it which also gets copied with the worksheet so that every new worksheet has this copied "Checklist ???" and this button. I'm looking for a macro that, when the button is selected, will bounce the active sheet's table "Checklist ???" off of "Record" and make changes as needed.
"Checklist ???" data range is B11:M20 (the header is on row 10); "Record" data range is B29:Q78 (the header is on row 28); Column headers are titled the same, just that "Record" has 4 extra columns, 3 in the middle and 1 on the end. "Checklist ???" columns 1-12 to "Record" columns 1-7, 10-12, 14-15. The search criteria is the 4th column in both tables ("Trk #").
I need the macro to do the following:If it finds a match, then update "Record" as needed with data from "Checklist ???", changing whatever cell is different in the row that contains the matching "Trk #", so long as the cell on "Checklist ???" is populated (i.e, if a cell on the target row of "Record" has a value, but it's blank on "Checklist ???", then "Record" wins; if it's blank on "Record", but populated on "Checklist ???", the Checklist wins. If both populated but different, then Checklist wins.If a "Trk #" exists on "Checklist ???" but is not on "Record" then add the line to "Record" (the 1st empty row, table size remains)I see no need for any "delete" at this time.
My concerns: The last column on record (column #16) is the filtering column for the worksheet copy event and needs to be left alone (it's formulated to produce a "Yes" or "No")I would like the ability to adjust table sizes if needed without modifying the macroThe table rows on "Checklist ???" will not be changed, deleted, or altered in any way by the macro.
Can anyone explain why the unique filter does not produce a unique result - sample attached?
View 2 Replies View RelatedHow do I go about using an advanced filter to filter a list of data e.g.
boat
boat
boat
car
car
truck
and have the filter extract only the boat entries to another worksheet, so on another worksheet I end up with
boat
boat
boat
1- Force cell format date to by (yyyy/mm/dd) only, with worng msgbox( validation).
2- Make the first day of a month in a color cell
I've Tried this In Conditional Formating (=VALUE(right(A1;2))=1) but didn't work
3-Make Advanced Filter to filter data between two dates .
I am trying to develop a procedure that allows the user select a customer from a drop down list (using Data validation), thereby providing the user with a summary of customer information. That I can do. What I would like to do is allow the user to add new information in the summary section which is then appended to the customer record further down the sheet (see attached example). New data could only be added to the last two columns. The user would be required to press a form button to append the data.
The catch would be if the customer was selected again, the new data would also display in the summary section.
I have a large Excel with details of 1,000 staff
Column J1 is called: Resource Name which has 1,000+ staff other columns have corresponding Hours, Project names etc
I want an advanced filter where I select COLUMN J:J and filter this whole sheet based on say 25 names (in the format they're in) e.g
Frank, James
Wilkonson, Paul,
etc
In the Advanced Filter, Ive selected J:J as LIST RANGE, but how do I input an OR statement in the Criteria, as above i.e where name is Frank, James OR Wilksonson, Paul OR
Alternatively, I have the list of the 25 names in Sheet 2, can the Advanced Filter do a VLOOKUP then filter entire Sheet based on the names provided?
I have a condition in advanced filtering as >90%. However, I would like the "90%" to be calculated via a formula in another cell and this condition to reference it. Is it possible?
View 8 Replies View RelatedI have a file that has a column of dates. I would like to use advanced
filter to filter anything with a date that is <today()-1 but I can't seem to
make the fomula work. I can make it filter on =today()-1 but when I use the
< it doesn't calculate today's date and gives me nothing.
Basically I have set up a list on sheet1, this is now on a drop down in sheet2 and my raw data in sheet3.
I want the table in sheet2 to just display the product items I select in the dropdown but it is displaying all the raw data (although is updating when I update the raw data)
Granted I copied the code whilst researching but I'm just not quite there.
Could someone possibly look at the attached and let me know where I am going wrong. Also as you can tell I am very new to teh VB application in Excel, could anyone reccommend a good place to start learning the very basics?
why the Advanced Filter works in the macro but not in the UDF?
Code:
Public Function strUniqueVal(rng As Range) 'rng variable must include sheet name
Dim c As Range
rng.AdvancedFilter Action:=xlFilterInPlace, Unique:=True
[Code]....
Having big problems getting an advanced filter macro to work on-going (meaning again and again and again once I update the table it filters from).
Macro is as follows:
Range("A1:O1").Select
Range("A3:O65536").AdvancedFilter Action:=xlFilterCopy, CriteriaRange:=Range( _
"H1:H2"), CopyToRange:=Range("T1:AH65536"), Unique:=False
Range("A3:O65536").AdvancedFilter Action:=xlFilterCopy, CriteriaRange:=Range( _
"G1:G2"), CopyToRange:=Range("AM1:BA65536"), Unique:=False
Do I need to specify the sheet that this filter should occur on? If so could someone indicate how I would get that into the macro?
I have a worksheet that conatins multiple columns that are populated from a sql query.One column is a parts list.This has 1705 rows.
I have another worksheet that contains a list of parts in one column.This list is varying in row length.
I want to be able to produce a list that only contains matching data , including () around parts and if not too difficult an indication of data that is not in first list but is in second list.
When I do an advanced filter using the second list as the criteria i am not recieving all of the data from the filter , ie in the first list there is parts in (1234XYZ ) but in the second list the part is 1234XYZ , this part is not being resulted in the advanced filter unless I put brackets around the part in the second list . There is no way of knowing which part is in brackets in the first list.
I have a huge list (over 900,000 rows) of text codes (e.g. ABC-12345) on Column A Spreadsheet 1 and would like to remove the ones that are not included in Column A Spreadsheet 2.
I changed all of the text on Column A Spreadsheet 2 to have the in front of it (e.g. ABC-1234) and tried to run the advanced filter but it does nothing.
This code works, but I would like to cut (remove) the records from the original record list.
Range("A:F").AdvancedFilter Action:=xlFilterCopy, CriteriaRange:=Range _
("H1:H3"), CopyToRange:=Range("J1:O1"), Unique:=True
I need to lookup and concatenate all the header values where the value in the corresponding row equals a certain value. For example, column D, has the column header value if the cell values equals "X". Likewise column E has the column header value if the cell values equals "Y". I have too many columns (this is just a simplified version) to use nested if statements.
resource1resource2resource3 XResources YResources
Jeff X resource2
John X X resource2 resource3
Jim Y resource1
I'm not an excel newbie, but I keep thinking there must be a simple solution that I am missing.
i am trying to work out the coinage for wages ie. 5546.75 needs to brake down into dominations ,notes and change i live in south africa so we use the desimal system. i have tried to use floor and mod as formulas but at some points it returns an error or incorect result.
View 8 Replies View RelatedI am trying to create a function using vba and the advanced filter function.
The spreadsheet I am using changes from week to week so it can have different amounts of columns and also rows.
This is my code.
Sub FilterCGML()
Dim rngToFilter As Range
Dim rngFilterCriteria As Range
Dim LastRow As Long, LastCol As Integer
With Sheets("Main FTE")
Range("b2000").Value = "Cost Code"
Range("b2001").Value = "5*"
It works ok if I have values in columns A:X but if for example I only have information in A:S I get a runtime error.
I know how to find the last column and last row by using
LastRow = ActiveSheet.Range("A" & Rows.Count).End(xlUp).Row
LastCol = Range("IV1").End(xlToLeft).Column
But I don't know how to modify my code to use these.
I am trying to perform a function that searches through the first column for any active "A" account and then copies the corresponding rows information into another worksheet. I think I need to use the advanced filter function however I can't seem to figure it out.
I have a list of subscribers, each with an account id and the years for which they have subscribed. Each account id can be listed up to five times. I am trying to find out how to use advanced filter(or some other way!) to find those accounts that were subscribers in any of the previous four years but not the current year.
View 9 Replies View RelatedI want to create an advanced filter criteria along the lines of
=AND(col1>begindate,col1<endate)
where 'col1' is the title in the cells at the head of the appropriate columns in the data range (B1), criteria range(F1) and extract area range (I1), and 'begindate' and 'enddate' are named single cells.
Why doesnt this work?
i am trying to use the autofilter command to paste 4 columns else where on the page using unique = true. this only will run once. when i try to run it again everything is blank. please see code below.
Sub copyindex01()
Columns("L:O").Select
Range("O1").Activate
Selection.Delete Shift:=xlToLeft
Range("G2").Select
Columns("G:J").AdvancedFilter Action:=xlFilterCopy, CopyToRange:=Columns( _
"M:P"), Unique:=True
Range("L1").Select
End Sub
I created an advanced filter macro which analyzes the "Orig_Appmt_Data" dataset from the "Summary" worksheet and provides the resulting analysis on the "Effective Rate" worksheet. However, when I change the name of the workbook, the macro fails. I was hoping someone could provide some assistance in helping adjust the vba code to take into account the subsequent changes in workbook filename. Here is the
Sub ER_Analysis()
'
Range("B8:R109").Select
Selection.ClearContents
Columns("P:R").Select
Selection.EntireColumn.Hidden = False
Range("Q5").Select
Range(" Conversion 3-28-07.xls'!Orig_Appmt_Data"). _
AdvancedFilter Action:=xlFilterCopy, CriteriaRange:=Range("Q5:Q6"), _
CopyToRange:=Range("B8:R8"), Unique:=False
Range("B8:R8").Select
Selection.AutoFilter
Range("B8:R87").Sort Key1:=Range("P8"), Order1:=xlDescending, Header:= _
xlGuess, OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
Selection.AutoFilter Field:=1, Criteria1:="<>", Criteria2:="<> TOTAL"
Columns("Q:Q").Select
Selection.EntireColumn.Hidden = True
Columns("P:P").Select
Selection.Font.Bold = True
Range("P8").Select
End Sub
I am trying to create my critera section for an Advanced Filter, but it seems like Auto Filter uses each row as a specific filter.
i.e. If I need to filter all the "2"s in column A, but both the "1"s and "2"s in column B, I need to create two different filters like this:
Column A Column B
2 1
2 2
Instead of just:
Column A Column B
2 1
2
Is there any way I can use auto-filter without having to put in every possible combination of my criteria in as different filters? Auto Merged Post;I did try creating columns next to each other, but that seems to only work as an "AND."
Per my example, I need to return everything with column A = 2, and column B = 1 or 2.
Except in my actual spreadsheet, it's more like where A = {1,2,3,4,5} and B = {0,9,8,7,6} and C = {a,b,c,d,e}
